Full cirkel : Finska Gardets befäl 1829 och 1906

Åke Backström

Psykologinen omistajuus etätyöskentelyssä

Tämän tutkimuksen tavoitteena oli kuvata ja selittää etätyöntekijöiden työhönsä kokemaa omistajuuden tunnetta sekä sen syntymismekanismeja ja seurauksia. Lisäksi tavoitteena oli selvittää kuinka etätyön eri muodot korostuvat etätyöskentelyn oletetuissa eduissa ja ongelmissa. Etätyön muotojen osalta oli tavoitteena myös selvittää niden yhteyttä itsenäisyyden tunteeseen. Tutkielman tutkimusmenetelmä on kvantitatiivinen ja määrällistä aineistoa analysoitiin SPSS-ohjelmiston avulla. Tutkielman tutkimuskontekstina on etätyö. Tutkimuksen perusteella etätyöntekijät kokevat työnsä keskimäärin melko paljon omakseen. Tutkimustulokset osoittivat, että työtä kohtaan koettu psykologinen omistajuus syntyy kolmen ”reitin” kautta, joita ovat kohteen hallinta, kohteen perusteellinen tunteminen ja voimavarojen käyttäminen kohteeseen. Näiden ”reittien” syntymiseen taas oli positiivinen yhteys seuraavilla työn ulottuvuuksilla: työn vaatimat taidot, työn hahmottaminen, työn merkitsevyys, itsenäisyys sekä palaute työstä. Tutkimustulokset todistivat, että psykologinen omistajuus oli positiivisessa yhdeydessä työperäiseen itsetuntoon, työtyytyväisyyteen, työmotivaatioon, yksilön kehittymiseen työssään, vastuuntuntoon työtään kohtaan sekä rehtiyteen. Voimakkain yhteys psykologisella omistajuudella oli työtyytyväisyyden kanssa. Tutkimuksen perusteella voidaankin sanoa, että mitä enemmän henkilö kokee työnsä omakseen, niin sitä tyytyväisempi hän on työhönsä. Tutkimustulokset osoittivat, että etätyön muodolla on merkitystä etätyöskentelyssä koettuihin etuihin ja ongelmiin. Täysipäiväisen etätyön tekijät kokivat edut kaikista positiivisimmin ja ongelmat taas kaikista negatiivisimmin. Mobiilit työntekijät kokivat työssään alhaisempaa itsenäisyyden tunnetta kuin muiden etätyön muotojen edustajat.

Landmarks on Finnishwomens road to Suffrage and Equal Citizenship

12 x 18 cm

Robust current control of a phase shifted full-bridge buck converter

In this thesis, the main point of interest is the robust control of a DC/DC converter. The use of reactive components in the power conversion gives rise to dynamical effects in DC/DC converters and the dynamical effects of the converter mandates the use of active control. Active control uses measurements from the converter to correct errors present in the converter’s output. The controller needs to be able to perform in the presence of varying component values and different kinds of disturbances in loading and noises in measurements. Such a feature in control design is referred as robustness. This thesis also contains survey of general properties of DC/DC converters and their effects on control design. In this thesis, a linear robust control design method is studied. A robust controller is then designed and applied to the current control of a phase shifted full bridge converter. The experimental results are shown to match simulations.

Direct-Driven Interior Magnet Permanent Magnet Synchronous Motors for a Full Electric Sports Car

The design process of direct-driven permanent magnet synchronous machines (PMSMs) for a full electric 4 ´ 4 sports car is presented. The rotor structure of the machine consists of two permanent magnet layers embedded inside the rotor laminations thus resulting in some inverse saliency, where the q-axis inductance is larger than the d-axis one. An integer slot stator winding was selected to fully take advantage of the additional reluctance torque. The performance characteristics of the designed PMSMs were calculated by applying a twodimensional finite element method. Cross-saturation between the d- and q-axes was taken into account in the calculation of the synchronous inductances. The calculation results are validated by measurements.

Monolithic zirconium dioxide as a full contour restorative material: With special emphasis on the optical and mechanical properties

Full contour monolithic zirconia restorations have shown an increased popularity in the dental field over the recent years, owing to its mechanical and acceptable optical properties. However, many features of the restoration are yet to be researched and supported by clinical studies to confirm its place among the other indirect restorative materials This series of in vitro studies aimed at evaluating and comparing the optical and mechanical properties, light cure irradiance, and cement polymerization of multiple monolithic zirconia material at variable thicknesses, environments, treatments, and stabilization. Five different monolithic zirconia materials, four of which were partially stabilized and one fully stabilized were investigated. The optical properties in terms of surface gloss, translucency parameter, and contrast ratio were determined via a reflection spectrophotometer at variable thicknesses, coloring, sintering method, and after immersion in an acidic environment. Light cure irradiance and radiant exposure were quantified through the specimens at variable thicknesses and the degree of conversion of two dual-cure cements was determined via Fourier Transform Infrared spectroscopy. Bi-axial flexural strength was evaluated to compare between the partially and fully stabilized zirconia prepared using different coloring and sintering methods. Surface characterization was performed using a scanning electron microscope and a spinning disk confocal microscope. The surface gloss and translucency of the zirconia investigated were brand and thickness dependent with the translucency values decreasing as the thickness increased. Staining decreased the translucency of the zirconia and enhanced surface gloss as well as the flexural strength of the fully stabilized zirconia but had no effect on partially stabilized zirconia. Immersion in a corrosive acid increased surface gloss and decreased the translucency of some zirconia brands. Zirconia thickness was inversely related to the amount of light irradiance, radiant exposure, and degree of monomer conversion. Type of sintering furnace had no effect on the optical and mechanical properties of zirconia. Monolithic zirconia maybe classified as a semi-translucent material that is well influenced by the thickness, limiting its use in the esthetic zones. Conventional acid-base reaction, autopolymerizing and dual-cure cements are recommended for its cementation. Its desirable mechanical properties give it a high potential as a restoration for posterior teeth. However, close monitoring with controlled clinical studies must be determined before any definite clinical recommendations can be drawn.

Political Legitimacy and Ethnocultural Justice. Essays on Public Reason, Democratic Citizenship, and the Rights of Cultural Minorities

In this thesis, I argue that there are public cultural reasons that can underpin public justifications of minority rights of indigenous and national minorities in a constitutionaldemocracy. I do so by tackling diverse issues facing a liberal theory of multiculturalism. In the first essay, I criticize Will Kymlicka’s comprehensive liberal theory of minority rights and propose a political liberal alternative. The main problem of Will Kymlicka’s theory is that it builds on the contestable liberal value of individual autonomy and thus fails to take diversity seriously. In the second essay, I elaborate on the Rawlsian political liberalism assumed here by criticizing Chandran Kukathas’s version of political liberalism as overly accommodating to diversity. In the third essay, I discuss questions of method that arise for a political liberal approach to the moral-political foundations of multiculturalism, and propose a certain understanding of the political liberal enterprise and its crucial standard of reasonableness. In the fourth essay, I dwell on the political liberal ethic of citizenship and propose a strongly inclusionist interpretation of the duty of civility. In the fifth and last essay, I introduce a certain understanding of ethnocultural justice and propose a view on certain cultural reasons as public cultural reasons. Cultural reasons are public when they are based on necessarily established cultural marks of a democratic polity, as specified by the cultural establishment view; and when they are crucial for the societal cultural bases of self-respect of citizens. The arguments in this thesis support, and help to spell out, moral-political rights of indigenous and national minorities as formulated in international legal documents, such as the Declaration on the Rights of Indigenous Peoples (United Nations 2007) or the International Covenant on Economic, Social and Cultural Rights (United Nations 1966).

Finding Methods for Recognizing and Classifying Spare Part Criticality – Case Full Deposit Stripping Machines

The aim of this Master’s thesis is to find a method for classifying spare part criticality in the case company. Several approaches exist for criticality classification of spare parts. The practical problem in this thesis is the lack of a generic analysis method for classifying spare parts of proprietary equipment of the case company. In order to find a classification method, a literature review of various analysis methods is required. The requirements of the case company also have to be recognized. This is achieved by consulting professionals in the company. The literature review states that the analytic hierarchy process (AHP) combined with decision tree models is a common method for classifying spare parts in academic literature. Most of the literature discusses spare part criticality in stock holding perspective. This is relevant perspective also for a customer orientated original equipment manufacturer (OEM), as the case company. A decision tree model is developed for classifying spare parts. The decision tree classifies spare parts into five criticality classes according to five criteria. The criteria are: safety risk, availability risk, functional criticality, predictability of failure and probability of failure. The criticality classes describe the level of criticality from non-critical to highly critical. The method is verified for classifying spare parts of a full deposit stripping machine. The classification can be utilized as a generic model for recognizing critical spare parts of other similar equipment, according to which spare part recommendations can be created. Purchase price of an item and equipment criticality were found to have no effect on spare part criticality in this context. Decision tree is recognized as the most suitable method for classifying spare part criticality in the company.

Controlling full penetration in MAG welding by the application of infrared thermography and neural network

In this study, an infrared thermography based sensor was studied with regard to usability and the accuracy of sensor data as a weld penetration signal in gas metal arc welding. The object of the study was to evaluate a specific sensor type which measures thermography from solidified weld surface. The purpose of the study was to provide expert data for developing a sensor system in adaptive metal active gas (MAG) welding. Welding experiments with considered process variables and recorded thermal profiles were saved to a database for further analysis. To perform the analysis within a reasonable amount of experiments, the process parameter variables were gradually altered by at least 10 %. Later, the effects of process variables on weld penetration and thermography itself were considered. SFS-EN ISO 5817 standard (2014) was applied for classifying the quality of the experiments. As a final step, a neural network was taught based on the experiments. The experiments show that the studied thermography sensor and the neural network can be used for controlling full penetration though they have minor limitations, which are presented in results and discussion. The results are consistent with previous studies and experiments found in the literature.