The Sottunga-Jurmo shear zone : structure and deformation history of a crustal-scale ductile shear zone in SW Finland

The aim of this study is to gain a better understanding of the structure and the deformation history of a NW-SE trending regional, crustal-scale shear structure in the Åland archipelago, SW Finland, called the Sottunga-Jurmo shear zone (SJSZ). Approaches involving e.g. structural geology, geochronology, geochemistry and metamorphic petrology were utilised in order to reconstruct the overall deformation history of the study area. The study therefore describes several features of the shear zone including structures, kinematics and lithologies within the study area, the ages of the different deformation phases (ductile to brittle) within the shear zone, as well as some geothermobarometric results. The results indicate that the SJSZ outlines a major crustal discontinuity between the extensively migmatized rocks NE of the shear zone and the unmigmatised, amphibolite facies rocks SW of the zone. The main SJSZ shows overall dextral lateral kinematics with a SW-side up vertical component and deformation partitioning into pure shear and simple shear dominated deformation styles that was intensified toward later stages of the deformation history. The deformation partitioning resulted in complex folding and refolding against the SW margin of the SJSZ, including conical and sheath folds, and in a formation of several minor strike-slip shear zones both parallel and conjugate to the main SJSZ in order to accommodate the regional transpressive stresses. Different deformation phases within the study area were dated by SIMS (zircon U-Pb), ID-TIMS (titanite U-Pb) and 40Ar/39Ar (pseudotachylyte wholerock) methods. The first deformation phase within the ca. 1.88 Ga rocks of the study area is dated at ca. 1.85 Ga, and the shear zone was reactivated twice within the ductile regime (at ca. 1.83 Ga and 1.79 Ga), during which the strain was successively increasingly partitioned into the main SJSZ and the minor shear zones. The age determinations suggest that the orogenic processes within the study area did not occur in a temporal continuum; instead, the metamorphic zircon rims and titanites show distinct, 10-20 Ma long breaks in deformation between phases of active deformation. The results of this study further imply slow cooling of the rocks through 600-700ºC so that at 1.79 Ga, 2 the temperature was still at least 600ºC. The highest recorded metamorphic pressures are 6.4-7.1 kbar. At the late stages or soon after the last ductile phase (ca. 1.79 Ga), relatively high-T mylonites and ultramylonites were formed, witnessing extreme deformation partitioning and high strain rates. After the rocks reached lower amphibolite facies to amphibolite-greenschist facies transitional conditions (ca. 500-550ºC), they cooled rapidly, probably due to crustal uplift and exhumation. The shear zone was reactivated at least once within the semi-brittle to brittle regime between ca. 1.79 Ga and 1.58 Ga, as evidenced by cataclasites and pseudotachylytes. In summary, the results of this study suggest that the Sottunga-Jurmo shear zone (and the South Finland shear zone) defines a major crustal discontinuity, and played a central role in accommodating the regional stresses during and after the Svecofennian orogeny.

The Sottunga-Jurmo shear zone : structure and deformation history of a crustal-scale ductile shear zone in SW Finland

The aim of this study is to gain a better understanding of the structure and the deformation history of a NW-SE trending regional, crustal-scale shear structure in the Åland archipelago, SW Finland, called the Sottunga-Jurmo shear zone (SJSZ). Approaches involving e.g. structural geology, geochronology, geochemistry and metamorphic petrology were utilised in order to reconstruct the overall deformation history of the study area. The study therefore describes several features of the shear zone including structures, kinematics and lithologies within the study area, the ages of the different deformation phases (ductile to brittle) within the shear zone, as well as some geothermobarometric results. The results indicate that the SJSZ outlines a major crustal discontinuity between the extensively migmatized rocks NE of the shear zone and the unmigmatised, amphibolite facies rocks SW of the zone. The main SJSZ shows overall dextral lateral kinematics with a SW-side up vertical component and deformation partitioning into pure shear and simple shear dominated deformation styles that was intensified toward later stages of the deformation history. The deformation partitioning resulted in complex folding and refolding against the SW margin of the SJSZ, including conical and sheath folds, and in a formation of several minor strike-slip shear zones both parallel and conjugate to the main SJSZ in order to accommodate the regional transpressive stresses. Different deformation phases within the study area were dated by SIMS (zircon U-Pb), ID-TIMS (titanite U-Pb) and 40Ar/39Ar (pseudotachylyte wholerock) methods. The first deformation phase within the ca. 1.88 Ga rocks of the study area is dated at ca. 1.85 Ga, and the shear zone was reactivated twice within the ductile regime (at ca. 1.83 Ga and 1.79 Ga), during which the strain was successively increasingly partitioned into the main SJSZ and the minor shear zones. The age determinations suggest that the orogenic processes within the study area did not occur in a temporal continuum; instead, the metamorphic zircon rims and titanites show distinct, 10-20 Ma long breaks in deformation between phases of active deformation. The results of this study further imply slow cooling of the rocks through 600-700ºC so that at 1.79 Ga, 2 the temperature was still at least 600ºC. The highest recorded metamorphic pressures are 6.4-7.1 kbar. At the late stages or soon after the last ductile phase (ca. 1.79 Ga), relatively high-T mylonites and ultramylonites were formed, witnessing extreme deformation partitioning and high strain rates. After the rocks reached lower amphibolite facies to amphibolite-greenschist facies transitional conditions (ca. 500-550ºC), they cooled rapidly, probably due to crustal uplift and exhumation. The shear zone was reactivated at least once within the semi-brittle to brittle regime between ca. 1.79 Ga and 1.58 Ga, as evidenced by cataclasites and pseudotachylytes. In summary, the results of this study suggest that the Sottunga-Jurmo shear zone (and the South Finland shear zone) defines a major crustal discontinuity, and played a central role in accommodating the regional stresses during and after the Svecofennian orogeny.

Cardiac Imaging in the Diagnosis of Coronary Artery Disease: The Value of Quantitative Imaging of Myocardial Perfusion and Deformation

Atherosclerosis is a chronic and progressive disease of the vasculature. Increasing coronary atherosclerosis can lead to obstructive coronary artery disease (CAD) or myocardial infarction. Computed tomography angiography (CTA) allows noninvasive assessment of coronary anatomy and quantitation of atherosclerotic burden. Myocardial blood flow (MBF) can be accurately measured in absolute terms (mL/g/min) by positron emission tomography (PET) with [15O] H O as a radiotracer. We studied the coronary microvascular dysfunction as a risk factor for future coronary calcification in healthy young men by measuring the coronary flow reserve (CFR) which is the ratio between resting and hyperemic MBF. Impaired vasodilator function was not linked with accelerated atherosclerosis 11 years later. Currently, there is a global interest in quantitative PET perfusion imaging. We established optimal thresholds of [15O] H O PET perfusion for diagnosis of CAD (hyperemic MBF of 2.3 mL/g/min and CFR of 2.5) in the first multicenter study of this type (Turku, Amsterdam and Uppsala). In myocardial bridging a segment of the coronary artery travels inside the myocardium and can be seen as intramural course (CTA) or systolic compression (invasive coronary angiography). Myocardial bridging is frequently linked with proximal atherosclerotic plaques. We used quantitative [15O] H O PET perfusion to evaluate the hemodynamic effects of myocardial bridging. Myocardial bridging was not associated with decreased absolute MBF or increased atherosclerotic burden. Speckle tracking allows quantitative echocardiographic imaging of myocardial deformation. Speckle tracking during dobutamine stress echocardiography was feasible and comparable to subjective wall motion analysis in the diagnosis of CAD. In addition, it correctly risk stratified patients with multivessel disease and extensive ischemia.

Procurement, Quality and Productivity Enhancements and Manufacturing Strategy Formulation Applying Product Life Cycle Method

The objective of the thesis was to create a framework that can be used to define a manufacturing strategy taking advantage of the product life cycle method, which enables PQP enhancements. The starting point was to study synkron implementation of cost leadership and differentiation strategies in different stages of the life cycles. It was soon observed that Porter’s strategies were too generic for the complex and dynamic environment where customer needs deviate market and product specifically. Therefore, the strategy formulation process is based on the Terry Hill’s order-winner and qualifier concepts. The manufacturing strategy formulation is initiated with the definition of order-winning and qualifying criteria. From these criteria there can be shaped product specific proposals for action and production site specific key manufacturing tasks that they need to answer in order to meet customers and markets needs. As a future research it is suggested that the process of capturing order-winners and qualifiers should be developed so that the process would be simple and streamlined at Wallac Oy. In addition, defined strategy process should be integrated to the PerkinElmer’s SGS process. SGS (Strategic Goal Setting) is one of the PerkinElmer’s core management processes. Full Text: Null

Gamma spectrometry and gamma and X-ray tomography of nuclear fuel

The purpose of gamma spectrometry and gamma and X-ray tomography of nuclear fuel is to determine both radionuclide concentration and integrity and deformation of nuclear fuel. The aims of this thesis have been to find out the basics of gamma spectrometry and tomography of nuclear fuel, to find out the operational mechanisms of gamma spectrometry and tomography equipment of nuclear fuel, and to identify problems that relate to these measurement techniques. In gamma spectrometry of nuclear fuel the gamma-ray flux emitted from unstable isotopes is measured using high-resolution gamma-ray spectroscopy. The production of unstable isotopes correlates with various physical fuel parameters. In gamma emission tomography the gamma-ray spectrum of irradiated nuclear fuel is recorded for several projections. In X-ray transmission tomography of nuclear fuel a radiation source emits a beam and the intensity, attenuated by the nuclear fuel, is registered by the detectors placed opposite. When gamma emission or X-ray transmission measurements are combined with tomographic image reconstruction methods, it is possible to create sectional images of the interior of nuclear fuel. MODHERATO is a computer code that simulates the operation of radioscopic or tomographic devices and it is used to predict and optimise the performance of imaging systems. Related to the X-ray tomography, MODHERATO simulations have been performed by the author. Gamma spectrometry and gamma and X-ray tomography are promising non-destructive examination methods for understanding fuel behaviour under normal, transient and accident conditions.

The purpose and use of passenger ships in 2058 - Future scenarios generated by the Delphi method

The purpose of the thesis is to generate scenarios of future purposes and of use of ships, suitable for STX Finland Cruise Oy to design and build, over a 50 year time span by applying the Delphi method and an open innovation approach in a future workshop. The scenarios were mapped out with help of two Delphi survey rounds and one future workshop. The number of participants in both surveys and the workshop was some twenty experts in each, representing various fields. On the basis of the first survey round, four different subject areas were selected for analysis: purposes for the use of ships; energy efficiency of cruises and ships; cost efficiency of sea transportation and vacation; and the views and expectations of the customers in the future. As a result of the future workshop, four different themes were established, which were studied further during the second Delphi round. The themes are future service and operation concepts; versatile uses of the space in ships; communication of environmental benefits of ships, future energy solutions and social interaction between passengers onboard. In addition to generating the scenarios, further aim of the thesis is to implement the Delphi method and workshop activity as foresight tools for STX Europe and to produce a chart of a future shipbuilding foresight community to can serve the open innovation processes in the maritime cluster as a whole.

Brittleness of Paper

Brittleness is a well-known material characteristic but brittleness of paper is vaguely covered. The objective of this thesis was to characterize the phenomenon and causes around brittleness of paper and to clarify if it is a measurable property. Brittleness of paper was approached from the perspectives of paper physics and paper mills. Brittleness is a property of dry paper and it causes problems at the finishing stages of paper machine. According to paper physics, brittle materials fail in the elastic regime, while ductile materials can locally accumulate a plastic deformation prior to the fracture and they are often able to withstand higher stresses. Brittleness of paper is vastly affected by the surrounding conditions: paper as a hygroscopic material tries to get to the equilibrium. It is also affected by the quality of the pulp used. Measurement techniques can be divided into two categories: based on the viscoelastic behavior of paper and on the exposure to the mechanical stress of sort. The experimental part of the thesis was based on the trials with brittle and non-brittle mill-made LWC papers. It is divided into three parts: strength testing of the brittle and non-brittle papers, analysis of the conditions that may contribute the brittleness and the experimental methods to evaluate brittle behavior. The strength measurements confirmed the influence of the moisture content, but only tensile energy absorption and the fracture toughness measurements provided modest differences between the brittle and non-brittle papers. Versatile analysis of the possible contributing factors resulted into speculation, while the brittle papers contained higher amount of starch, triglycerides and steryl esters. The experimental research proved that the formation, the sensory impression and the variation of local strains may contain the crucial information of paper brittleness.

Spontaneous Focusing on Quantitative Relations and the Development of Rational Number Conceptual Knowledge

The aim of the present set of studies was to explore primary school children’s Spontaneous Focusing On quantitative Relations (SFOR) and its role in the development of rational number conceptual knowledge. The specific goals were to determine if it was possible to identify a spontaneous quantitative focusing tendency that indexes children’s tendency to recognize and utilize quantitative relations in non-explicitly mathematical situations and to determine if this tendency has an impact on the development of rational number conceptual knowledge in late primary school. To this end, we report on six original empirical studies that measure SFOR in children ages five to thirteen years and the development of rational number conceptual knowledge in ten- to thirteen-year-olds. SFOR measures were developed to determine if there are substantial differences in SFOR that are not explained by the ability to use quantitative relations. A measure of children’s conceptual knowledge of the magnitude representations of rational numbers and the density of rational numbers is utilized to capture the process of conceptual change with rational numbers in late primary school students. Finally, SFOR tendency was examined in relation to the development of rational number conceptual knowledge in these students. Study I concerned the first attempts to measure individual differences in children’s spontaneous recognition and use of quantitative relations in 86 Finnish children from the ages of five to seven years. Results revealed that there were substantial inter-individual differences in the spontaneous recognition and use of quantitative relations in these tasks. This was particularly true for the oldest group of participants, who were in grade one (roughly seven years old). However, the study did not control for ability to solve the tasks using quantitative relations, so it was not clear if these differences were due to ability or SFOR. Study II more deeply investigated the nature of the two tasks reported in Study I, through the use of a stimulated-recall procedure examining children’s verbalizations of how they interpreted the tasks. Results reveal that participants were able to verbalize reasoning about their quantitative relational responses, but not their responses based on exact number. Furthermore, participants’ non-mathematical responses revealed a variety of other aspects, beyond quantitative relations and exact number, which participants focused on in completing the tasks. These results suggest that exact number may be more easily perceived than quantitative relations. As well, these tasks were revealed to contain both mathematical and non-mathematical aspects which were interpreted by the participants as relevant. Study III investigated individual differences in SFOR 84 children, ages five to nine, from the US and is the first to report on the connection between SFOR and other mathematical abilities. The cross-sectional data revealed that there were individual differences in SFOR. Importantly, these differences were not entirely explained by the ability to solve the tasks using quantitative relations, suggesting that SFOR is partially independent from the ability to use quantitative relations. In other words, the lack of use of quantitative relations on the SFOR tasks was not solely due to participants being unable to solve the tasks using quantitative relations, but due to a lack of the spontaneous attention to the quantitative relations in the tasks. Furthermore, SFOR tendency was found to be related to arithmetic fluency among these participants. This is the first evidence to suggest that SFOR may be a partially distinct aspect of children’s existing mathematical competences. Study IV presented a follow-up study of the first graders who participated in Studies I and II, examining SFOR tendency as a predictor of their conceptual knowledge of fraction magnitudes in fourth grade. Results revealed that first graders’ SFOR tendency was a unique predictor of fraction conceptual knowledge in fourth grade, even after controlling for general mathematical skills. These results are the first to suggest that SFOR tendency may play a role in the development of rational number conceptual knowledge. Study V presents a longitudinal study of the development of 263 Finnish students’ rational number conceptual knowledge over a one year period. During this time participants completed a measure of conceptual knowledge of the magnitude representations and the density of rational numbers at three time points. First, a Latent Profile Analysis indicated that a four-class model, differentiating between those participants with high magnitude comparison and density knowledge, was the most appropriate. A Latent Transition Analysis reveal that few students display sustained conceptual change with density concepts, though conceptual change with magnitude representations is present in this group. Overall, this study indicated that there were severe deficiencies in conceptual knowledge of rational numbers, especially concepts of density. The longitudinal Study VI presented a synthesis of the previous studies in order to specifically detail the role of SFOR tendency in the development of rational number conceptual knowledge. Thus, the same participants from Study V completed a measure of SFOR, along with the rational number test, including a fourth time point. Results reveal that SFOR tendency was a predictor of rational number conceptual knowledge after two school years, even after taking into consideration prior rational number knowledge (through the use of residualized SFOR scores), arithmetic fluency, and non-verbal intelligence. Furthermore, those participants with higher-than-expected SFOR scores improved significantly more on magnitude representation and density concepts over the four time points. These results indicate that SFOR tendency is a strong predictor of rational number conceptual development in late primary school children. The results of the six studies reveal that within children’s existing mathematical competences there can be identified a spontaneous quantitative focusing tendency named spontaneous focusing on quantitative relations. Furthermore, this tendency is found to play a role in the development of rational number conceptual knowledge in primary school children. Results suggest that conceptual change with the magnitude representations and density of rational numbers is rare among this group of students. However, those children who are more likely to notice and use quantitative relations in situations that are not explicitly mathematical seem to have an advantage in the development of rational number conceptual knowledge. It may be that these students gain quantitative more and qualitatively better self-initiated deliberate practice with quantitative relations in everyday situations due to an increased SFOR tendency. This suggests that it may be important to promote this type of mathematical activity in teaching rational numbers. Furthermore, these results suggest that there may be a series of spontaneous quantitative focusing tendencies that have an impact on mathematical development throughout the learning trajectory.

Combinatorics on Words. New Aspects on Avoidability, Defect Effect, Equations and Palindromes

In this thesis we examine four well-known and traditional concepts of combinatorics on words. However the contexts in which these topics are treated are not the traditional ones. More precisely, the question of avoidability is asked, for example, in terms of k-abelian squares. Two words are said to be k-abelian equivalent if they have the same number of occurrences of each factor up to length k. Consequently, k-abelian equivalence can be seen as a sharpening of abelian equivalence. This fairly new concept is discussed broader than the other topics of this thesis. The second main subject concerns the defect property. The defect theorem is a well-known result for words. We will analyze the property, for example, among the sets of 2-dimensional words, i.e., polyominoes composed of labelled unit squares. From the defect effect we move to equations. We will use a special way to define a product operation for words and then solve a few basic equations over constructed partial semigroup. We will also consider the satisfiability question and the compactness property with respect to this kind of equations. The final topic of the thesis deals with palindromes. Some finite words, including all binary words, are uniquely determined up to word isomorphism by the position and length of some of its palindromic factors. The famous Thue-Morse word has the property that for each positive integer n, there exists a factor which cannot be generated by fewer than n palindromes. We prove that in general, every non ultimately periodic word contains a factor which cannot be generated by fewer than 3 palindromes, and we obtain a classification of those binary words each of whose factors are generated by at most 3 palindromes. Surprisingly these words are related to another much studied set of words, Sturmian words.

Epidemiology, management and outcome of facial injuries

Dental injuries are common and the incidence of maxillofacial injuries has increased over the recent decades in Finland. Accidental injuries are the global leading cause of death among children over the age of one year and among adults under the age of 40 globally. Significant resources and costs are needed for the treatment of these patients. The prevention is the most economical way to reduce trauma rates and costs. For the prevention it is crucial to know the prevalences, incidences and risk factors related to injuries. To improve the quality of treatment, it is essential to explore the causes, trauma mechanisms and management of trauma. The above mentioned was the aim of this thesis. With a large epidemiological cohort study (5737 participants) it was possible to estimate lifetime prevalence of and risk factors for dental trauma in general population (Study I). The prevalence of dental fractures was 43% and the prevalence of dental luxations and avulsions was 14%. Male gender, a history of previous non-dental injuries, mental distress, overweight and high alcohol consumption were positively associated with the occurrence of dental injuries Study II was conducted to explore the differences in type and multiplicity of mandibular fractures in three different countries (Canada, Finland and Kuwait). This retrospective study showed that the differences in mandibular fracture multiplicity and location are based on different etiologies and demographic patterns. This data can be exploited for planning of measures to prevent traumatic facial fractures. The etiology, management and outcome of 63 pediatric skull base fracture (Study III) and 20 pediatric frontobasal fracture patients (Study IV) were explored. These retrospective studies showed that, both skull base fracture and frontobasa fracture are rare injuries in childhood and although intracranial injuries and morbidity are frequent, permanent neurological or neuropsychological deficits are infrequent. A systematic algorithm (Study V) for computer tomography (CT) image review was aimed at clinicians and radiologists to improve the assessment of patients with complex upper midface and cranial base trauma. The cohort study was cross sectional and data was collected in the Turku and Oulu University Hospitals. A novel image-reviewing algorithm was created to enhance the specificity of CT for the diagnosis of frontobasal fractures. The study showed that an image-viewing algorithm standardizes the frontobasal trauma detection procedure and leads to better control and assessment. The purpose of the retrospective subcranial craniotomy study (VI) was to review the types of frontobasal fractures and their management, complications and outcome when the fracture is approached subcranially. The subcranial approach appears to be successful and have a reasonably low complication rate. It may be recommended as the technique of choice in multiple and the most complicated frontal base fractures where the endoscopic endonasal approach is not feasible.

Collectiveness within startup teams – Leading the way to initiating and managing collective pursuit of opportunities in organizational contexts

While traditional entrepreneurship literature addresses the pursuit of entrepreneurial opportunities to a solo entrepreneur, scholars increasingly agree that new ventures are often founded and operated by entrepreneurial teams as collective efforts especially in hightechnology industries. Researchers also suggest that team ventures are more likely to survive and succeed than ventures founded by the individual entrepreneur although specific challenges might relate to multiple individuals being involved in joint entrepreneurial action. In addition to new ventures, entrepreneurial teams are seen central for organizing work in established organizations since the teams are able to create major product and service innovations that drive organizational success. Acknowledgement of the entrepreneurial teams in various organizational contexts has challenged the notion on the individual entrepreneur. However, considering that entrepreneurial teams represent a collective-level phenomenon that bases on interactions between organizational members, entrepreneurial teams may not have been studied as indepth as could be expected from the point of view of the team-level, rather than the individual or the individuals in the team. Many entrepreneurial team studies adopt the individualized view of entrepreneurship and examine the team members’ aggregate characteristics or the role of a lead entrepreneur. The previous understandings might not offer a comprehensive and indepth enough understanding of collectiveness within entrepreneurial teams and team venture performance that often relates to the team-level issues in particular. In addition, as the collective-level of entrepreneurial teams has been approached in various ways in the existing literatures, the phenomenon has been difficult to understand in research and practice. Hence, there is a need to understand entrepreneurial teams at the collective-level through a systematic and comprehensive perspective. This study takes part in the discussions on entrepreneurial teams. The overall objective of this study is to offer a description and understanding of collectiveness within entrepreneurial teams beyond individual(s). The research questions of the study are: 1) what collectiveness within entrepreneurial teams stands for, what constitutes the basic elements of it, and who are included in it, 2) why, how, and when collectiveness emerges or reinforces within entrepreneurial teams, and 3) why collectiveness within entrepreneurial teams matters and how it could be developed or supported. In order to answer the above questions, this study bases on three approaches, two set of empirical data, two analysis techniques, and conceptual study. The first data set consists of 12 qualitative semi-structured interviews with business school students who are seen as prospective entrepreneurs. The data is approached through a social constructionist perspective and analyzed through discourse analysis. The second data set bases on a qualitative multiplecase study approach that aims at theory elaboration. The main data consists of 14 individual and four group semi-structured thematic interviews with members of core entrepreneurial teams of four team startups in high-technology industries. The secondary data includes publicly available documents. This data set is approached through a critical realist perspective and analyzed through systematic thematic analysis. The study is completed through a conceptual study that aims at building a theoretical model of collective-level entrepreneurship drawing from existing literatures on organizational theory and social-psychology. The theoretical work applies a positivist perspective. This study consists of two parts. The first part includes an overview that introduces the research background, knowledge gaps and objectives, research strategy, and key concepts. It also outlines the existing knowledge of entrepreneurial team literature, presents and justifies the choices of paradigms and methods, summarizes the publications, and synthesizes the findings through answering the above mentioned research questions. The second part consists of five publications that address independent research questions but all enable to answer the research questions set for this study as a whole. The findings of this study suggest a map of relevant concepts and their relationships that help grasp collectiveness within entrepreneurial teams. The analyses conducted in the publications suggest that collectiveness within entrepreneurial teams stands for cognitive and affective structures in-between team members including elements of collective entity, collective idea of business, collective effort, collective attitudes and motivations, and collective feelings. Collectiveness within entrepreneurial teams also stands for specific joint entrepreneurial action components in which the structures are constructed. The action components reflect equality and democracy, and open and direct communication in particular. Collectiveness emerges because it is a powerful tool for overcoming individualized barriers to entrepreneurship and due to collectively oriented desire for, collective value orientation to, demand for, and encouragement to team entrepreneurship. Collectiveness emerges and reinforces in processes of joint creation and realization of entrepreneurial opportunities including joint analysis and planning of the opportunities and strategies, decision-making and realization of the opportunities, and evaluation, feedback, and sanctions of entrepreneurial action. Collectiveness matters because it is relevant for potential future entrepreneurs and because it affects the ways collective ventures are initiated and managed. Collectiveness also matters because it is a versatile, dynamic, and malleable phenomenon and the ideas of it can be applied across organizational contexts that require team work in discovering or creating and realizing new opportunities. This study further discusses how the findings add to the existing knowledge of entrepreneurial team literature and how the ideas can be applied in educational, managerial, and policy contexts.

Yhteistoiminnallinen hoitotyö

Opinnäytetyön tarkoituksena on selvittää, mitä on yhteistoiminnallinen hoitotyö. Opinnäyteytössä määritellään yhteistoiminnallisen hoitotyön käsite ja sisältö. Työssä on tarkasteltu yhteistoiminnallisuutta selittäviä käsitteitä. Opinnäytetyö on osa laajempaa projektia, jossa on mukana HUS:n Psykiatriakeskus, Helsingin kaupungin terveyskeskuksen psykiatrian osasto sekä Helsingin ammattikorkeakoulu Stadia. Projekin tarkoituksena on kehittää psykiatrisen hoitotyön käytäntöä yhteistoiminnalliseksi. Opinnäytetyö on tehty soveltaen systemaattisen kirjallisuuskatsauksen mallia. Aineisto koostuu yhteensä kolmestatoista lähteestä. Mukana on väitöskirjoja, pro gradu- tutkielmia sekä tutkimusartikkeleita, jotka on julkaistu hoitotieteellisissä julkaisuissa. Kirjallisuuskatsauksen tuloksina nousi esiin, että yhteistoiminnallinen hoitotyö on potilaan ja hoitajan välistä yhteistyötä. Se on potilaslähtöinen tapa tehdä hoitotyötä, jossa otetaan huomioon potilaan voimavarat ja tarpeet. Potilas on vastuullinen osallistuja. Jokainen hoitoon osallistuva määrittelee hoidon tavoitteen ja kukin osallistuu siihen tasavertaisesti. Yhteistoiminnallisuuteen kuuluu molemminpuolinen luottamus. Kaikki osapuolet vaikuttuvat toisistaan ja dialogisuuden avulla voidana löytää uusia näkökulmia hoitoon. Yhteistoiminnallisuus on uusi käsite hoitotyössä. Sen ymmärtäminen ja toteutuminen vaatii hoitotyön tekijöiden perehdyttämistä syvällisemmin aiheeseen. Se vaatii potilaalta mahdollisuutta osallistua voimavarojensa mukaan hoitoon. Yhteistoiminnallisen hoitotyön avulla voidaan motivoida potilasta aktiivisempaan rooliin omassa hoidossaan.

Hinnoittelu yrityksen kannattavuuden kehittämisessä

Diplomityössä tutkittiin hinnoittelun merkitystä yrityksen kannattavuuden kehittämisessä. Työn teoriaosassa selvitettiin pöytätutkimuksena hinnoittelun ja kannattavuuden keskeiset tekijät Lifetime Oy:n liiketoiminnan kannalta. Kilpailukykyisen liiketoiminnan kehittämiseksi suoritettiin markkinatutkimuskysely 1857 yrityksen päättäjälle. Saatujen tulosten perusteella(N=132) Lifetime Oy:n Liiketoimintamallit jaoteltiin (B-to-C), (SOT), ja (B-to-B) Liiketoimintamalleihin, brandeihin, kanaviin, ja asiakassegmentteihin. Diplomityön empiriaosuuden muodostivat markkinointitutkimussekä kauppakeskushankkeet Lifetime Value ShopTM 2007 Edition, ja pieniomenaTM.com, sekä näihin liittyvien brandien ja segmenttikohtaisten hinnoittelustrategioiden luominen.

Franchisingin soveltuvuus vanhustenhuoltolaitosten liiketoiminnassa

Työn tavoitteena on tutkia franchising-liiketoimintamallin soveltuvuutta kasvustrategiaksi vanhustenhuoltolaitosten toimialalla sekä mandollisuutta toteuttaa franchising-liiketoiminnan mukainen järjestelmä Finnish Wellbeing Center (FWBC) tyylisten vanhustenhuoltolaitosten monistamiseksi tämän hetkisistä Iähtokohdista. Yleisen soveltuvuuden tutkimista lähestytään kahdesta eri näkökulmasta, jotka myös muodostavat työn teoriaosuuden. Ensinnäkin perehdytään franchising liiketoimintamalliin perusteellisesti sekä käydään läpi soveltuvuustekijät hyvien ja huonojen puolien, toimialan luonteen ja franchisingiin sopivien liiketoimintakonseptien kannalta. Tämän jälkeen tutustutaan vanhustenhuollon palveluiden järjestämiseen. Palveluita tarjotaan erityylisissä palvelutiloissa riippuen vanhuksen kuntoisuusasteesta. Näistä valitaan päiväkeskukset, palveluasuminen sekä vanhainkodit franchisingin soveltuvuuden tarkasteluun. Työn empiriaosan tulokset viittaavat siihen, että vanhustenhuoltolaitosten soveltuvuus franchising-liiketoimintamalliin korreloi selvästi vanhusten kuntoisuusasteeseen. Päiväkeskusten liiketoimintaa voisi kasvattaa franchising menetelmällä, siinä missä palveluasumisen ja vanhainkotien soveltuvuus on vain teoreettinen. FWBC-projektissa franchising-liiketoimintamallia ei voida toteuttaa nykyisistä lähtökohdista, koska varsinainen franchisoitava toiminta ei ole täysin suomalaisen osapuolen hallussa. FWBC-vanhustenhuoltolaitos on vanhainkotityyppinen, joka ei sovellu franchisoitavaksi työn ensimmäisen johtopäätöksen perusteella. Mahdollisuus tämän hetkisen liiketoiminnan parantamiseen voisi löytyä tuotemerkki-franchisoinnista, jota nykyinen toimintatapa jo sinällään muistuttaa.

Yritysverkoston kehittäminen: käsitteet ja menetelmät

Tämän pro gradu -tutkielman aiheena on yritysverkostojen kehittäminen sekä siihen liittyvät käsitteet ja menetelmät. Tutkielman tavoitteena on selkiyttää verkostoitumiseen, verkostosuhteen kehittymiseen ja yritysverkoston kehittämiseen liittyviä käsitteitä. Tutkielmassa verkostoitumista tarkastellaan transaktiokustannusteorian, resurssiperusteisen näkemyksen ja IMP-tutkimusryhmän vuorovaikutusnäkökulman mukaisesti. Verkostoituminen nähdään osana organisaation uudistumisprosessia ja sitä mallinnetaan verkostosuhteen kehittymisprosessin avulla. Verkoston kehittäminen on jatke organisaation uudistumisprosessille ja osa verkostosuhteen kehittymisprosessia. Verkoston kehittämiseen liittyen tutkielmassa tarkastellaan, miten verkoston kehittäminen eroaa yrityksen sisäisestä kehittämisestä, ja millaisia haasteita ja menestystekijöitä yhteisestä kehittämistoiminnasta on löydettävissä. Tutkielmassa luokitellaan myös kehittämiskohteita sekä tarkastellaan, millaisella kehittämistyön organisoitumismallilla sekä työkaluilla ja menetelmillä yritysverkoston kehittämistä voidaan tukea.