Patents in the Information and Communications Technology Sector - Development Trends, Problem Areas and Pressures for Change

The patent system was created for the purpose of promoting innovation by granting the inventors a legally defined right to exclude others in return for public disclosure. Today, patents are being applied and granted in greater numbers than ever, particularly in new areas such as biotechnology and information andcommunications technology (ICT), in which research and development (R&D) investments are also high. At the same time, the patent system has been heavily criticized. It has been claimed that it discourages rather than encourages the introduction of new products and processes, particularly in areas that develop quickly, lack one-product-one-patent correlation, and in which theemergence of patent thickets is characteristic. A further concern, which is particularly acute in the U.S., is the granting of so-called 'bad patents', i.e. patents that do not factually fulfil the patentability criteria. From the perspective of technology-intensive companies, patents could,irrespective of the above, be described as the most significant intellectual property right (IPR), having the potential of being used to protect products and processes from imitation, to limit competitors' freedom-to-operate, to provide such freedom to the company in question, and to exchange ideas with others. In fact, patents define the boundaries of ownership in relation to certain technologies. They may be sold or licensed on their ownor they may be components of all sorts of technology acquisition and licensing arrangements. Moreover, with the possibility of patenting business-method inventions in the U.S., patents are becoming increasingly important for companies basing their businesses on services. The value of patents is dependent on the value of the invention it claims, and how it is commercialized. Thus, most of them are worth very little, and most inventions are not worth patenting: it may be possible to protect them in other ways, and the costs of protection may exceed the benefits. Moreover, instead of making all inventions proprietary and seeking to appropriate as highreturns on investments as possible through patent enforcement, it is sometimes better to allow some of them to be disseminated freely in order to maximize market penetration. In fact, the ideology of openness is well established in the software sector, which has been the breeding ground for the open-source movement, for instance. Furthermore, industries, such as ICT, that benefit from network effects do not shun the idea of setting open standards or opening up their proprietary interfaces to allow everyone todesign products and services that are interoperable with theirs. The problem is that even though patents do not, strictly speaking, prevent access to protected technologies, they have the potential of doing so, and conflicts of interest are not rare. The primary aim of this dissertation is to increase understanding of the dynamics and controversies of the U.S. and European patent systems, with the focus on the ICT sector. The study consists of three parts. The first part introduces the research topic and the overall results of the dissertation. The second part comprises a publication in which academic, political, legal and business developments that concern software and business-method patents are investigated, and contentiousareas are identified. The third part examines the problems with patents and open standards both of which carry significant economic weight inthe ICT sector. Here, the focus is on so-called submarine patents, i.e. patentsthat remain unnoticed during the standardization process and then emerge after the standard has been set. The factors that contribute to the problems are documented and the practical and juridical options for alleviating them are assessed. In total, the dissertation provides a good overview of the challenges and pressures for change the patent system is facing,and of how these challenges are reflected in standard setting.

Gas-phase photocatalytic oxidation of volatile organic compounds

Substances emitted into the atmosphere by human activities in urban and industrial areas cause environmental problems such as air quality degradation, respiratory diseases, climate change, global warming, and stratospheric ozone depletion. Volatile organic compounds (VOCs) are major air pollutants, emitted largely by industry, transportation and households. Many VOCs are toxic, and some are considered to be carcinogenic, mutagenic, or teratogenic. A wide spectrum of VOCs is readily oxidized photocatalytically. Photocatalytic oxidation (PCO) over titanium dioxide may present a potential alternative to air treatment strategies currently in use, such as adsorption and thermal treatment, due to its advantageous activity under ambient conditions, although higher but still mild temperatures may also be applied. The objective of the present research was to disclose routes of chemical reactions, estimate the kinetics and the sensitivity of gas-phase PCO to reaction conditions in respect of air pollutants containing heteroatoms in their molecules. Deactivation of the photocatalyst and restoration of its activity was also taken under consideration to assess the practical possibility of the application of PCO to the treatment of air polluted with VOCs. UV-irradiated titanium dioxide was selected as a photocatalyst for its chemical inertness, non-toxic character and low cost. In the present work Degussa P25 TiO2 photocatalyst was mostly used. In transient studies platinized TiO2 was also studied. The experimental research into PCO of following VOCs was undertaken: - methyl tert-butyl ether (MTBE) as the basic oxygenated motor fuel additive and, thus, a major non-biodegradable pollutant of groundwater; - tert-butyl alcohol (TBA) as the primary product of MTBE hydrolysis and PCO; - ethyl mercaptan (ethanethiol) as one of the reduced sulphur pungent air pollutants in the pulp-and-paper industry; - methylamine (MA) and dimethylamine (DMA) as the amino compounds often emitted by various industries. The PCO of VOCs was studied using a continuous-flow mode. The PCO of MTBE and TBA was also studied by transient mode, in which carbon dioxide, water, and acetone were identified as the main gas-phase products. The volatile products of thermal catalytic oxidation (TCO) of MTBE included 2-methyl-1-propene (2-MP), carbon monoxide, carbon dioxide and water; TBA decomposed to 2-MP and water. Continuous PCO of 4 TBA proceeded faster in humid air than dry air. MTBE oxidation, however, was less sensitive to humidity. The TiO2 catalyst was stable during continuous PCO of MTBE and TBA above 373 K, but gradually lost activity below 373 K; the catalyst could be regenerated by UV irradiation in the absence of gas-phase VOCs. Sulphur dioxide, carbon monoxide, carbon dioxide and water were identified as ultimate products of PCO of ethanethiol. Acetic acid was identified as a photocatalytic oxidation by-product. The limits of ethanethiol concentration and temperature, at which the reactor performance was stable for indefinite time, were established. The apparent reaction kinetics appeared to be independent of the reaction temperature within the studied limits, 373 to 453 K. The catalyst was completely and irreversibly deactivated with ethanethiol TCO. Volatile PCO products of MA included ammonia, nitrogen dioxide, nitrous oxide, carbon dioxide and water. Formamide was observed among DMA PCO products together with others similar to the ones of MA. TCO for both substances resulted in the formation of ammonia, hydrogen cyanide, carbon monoxide, carbon dioxide and water. No deactivation of the photocatalyst during the multiple long-run experiments was observed at the concentrations and temperatures used in the study. PCO of MA was also studied in the aqueous phase. Maximum efficiency was achieved in an alkaline media, where MA exhibited high fugitivity. Two mechanisms of aqueous PCO – decomposition to formate and ammonia, and oxidation of organic nitrogen directly to nitrite - lead ultimately to carbon dioxide, water, ammonia and nitrate: formate and nitrite were observed as intermediates. A part of the ammonia formed in the reaction was oxidized to nitrite and nitrate. This finding helped in better understanding of the gasphase PCO pathways. The PCO kinetic data for VOCs fitted well to the monomolecular Langmuir- Hinshelwood (L-H) model, whereas TCO kinetic behaviour matched the first order process for volatile amines and the L-H model for others. It should be noted that both LH and the first order equations were only the data fit, not the real description of the reaction kinetics. The dependence of the kinetic constants on temperature was established in the form of an Arrhenius equation.

Tietokoneohjelmien suojaaminen ja ohjelmien samankaltaisuuksien aiheuttamat oikeudelliset ongelmat

Tietokoneohjelmaa suojataan tekijänoikeudella, liikesalaisuussuojalla ja patentilla. Jotta ohjelmistoalan yritys pärjäisi dynaamisilla ja kansainvälisillä ohjelmistomarkkinoilla sen pitää patentoida ohjelmansa sekä hyödyntää ja puolustaa patenttejaan. Ohjelmistopatentteja myönnetään myös Euroopassa yhä enemmän. Ohjelmistoteollisuudessa tuotekehitys perustuu usein jo olemassa olevalle, josta aiheutuu alalle tyypillistä teknologioiden päällekkäisyyttä. Jotta yritys pystyisi toimimaan tietyllä markkina-alueella, se saattaa tarvita sellaista teknologiaa joka on jo jonkun patentoimaa. Edellä mainituista syistä sekä ohjelmistopatenttien samanlaisuuksista ja patenttien suuresta määrästä johtuen patentinloukkauksia tapahtuu ja niihin tulee reagoida liikesuhteet huomioon ottaen, esimerkiksi neuvottelemalla liiketoimintasopimuksesta, sovittelemalla konfliktia sovittelumenettelyssä ja tarvittaessa oikeudellisin keinoin.

The cultural dimension in focus : promoting awareness of diversity and respect for difference in a Finland-Swedish EFL classroom

This study addresses the role of EFL education, its potential and shortcomings, and the challenges the future of EFL education will bring. It is argued that new societal demands and the limited time we have at our disposal in the classroom make it necessary to rethink goals and content and move away from the transmissionof limited sets of facts and information to helping students develop awareness and competences that can be applied in many different situations, also in a perspective of lifelong learning. The overall aim of the current study is to problematize and increase understanding of the implementation of cultural aspects in the language classroom by addressing the interrelated what, why and how of the cultural dimension within EFL education. This has been conducted by means of theoretical explorations into the area, alongside an attempt at promoting intercultural competence (IC) in a more systematic and insightful manner within my own educational praxis. The focus of the intercultural work in the classroom was on the promotion of awareness of difference and diversity, as well as respect for such difference through the ability to decenter from cultural norms and behavior that previously have been taken for granted. These are two elements that have been suggested as fundamental for other work with IC in the classroom and for the realization of important aspects of the underlying values of basic education. In the context of this study, IC comprises several interconnected components supportingeach other in a variety of ways, with the further aim being interaction with and respect for difference in general, not only concerning e.g. representatives ofcertain English-speaking communities. The methodology was informed by action research, with myself in the role of the teacher-researcher or the reflective practitioner. For the purpose of the project I was authorized to take on the EFL education for the three years of upper comprehensive school of one random class of students originally assigned to one of the language teachers of the selected Finland-Swedish school. Thus, the class of 17 students was not specifically chosen for the project, and the aims and contents chosen for the development project were placed within the framework of the ordinary curriculum. By exploring the students¿ insights concerning different English-speaking cultural groups, mainly through a set of questionnaires, it was possible to outline the work with the cultural dimension in the classroom for the following three years. Work progress was evaluated at specific stages, and the final project evaluations were conducted through individual student interviews in grade 9. The interviews were focused on possible development of students¿ insights concerning different aspects of the cultural dimension. In particular this concerned awareness of difference and diversity, including modification of stereotypes, as well as the ability to decenterin order to be better able to respect such difference. I also explored students¿ awareness and views of the activities and approaches used in class, as well asaffordances both inside and outside the EFL classroom in relation to these intended insights. A further focus area was the perceived relevance to students of different aspects of the cultural dimension. The frameworks and approaches adopted for the work in the classroom all have in common that they are based on a constructivist framework, where knowledge is constructed and reconstructed through interaction with one¿s social and cultural environment, including interaction with others. Reflective processes precede or are simultaneous with the learning of basic factual knowledge. This entails a view of learning as a progression from simple to more complex models rather than as a progression from facts to understanding and analysis. Here, the development of intercultural competence is seen asa cyclical process, or along a spiral curriculum, from simple to more complex levels through a combination of cognitive, affective and behavioral elements within a framework of experiential learning. This project has shown one possible wayforward concerning the development of intercultural competence within EFL education through a more systematic and comprehensive approach regarding linguistic and cultural aspects. The evaluation of the educational process explored in the study suggests the possibilities for work with the promotion of awareness of difference and diversity concerning some specific context that, based on students¿ prior knowledge and preconceptions, would benefit from further work. In this case, the specific context primarily concerned different aspects of both cultural and linguistic conditions in the UK. It is also suggested that many students developed the ability to decenter, described in the study as integral to being able to respect otherness. What still remains to be explored are more individualized approaches considering students¿ different levels of departure. Further work alsoneeds to be put into how to apply insights gained in these specific situations to more general contexts. It is also necessary to explore the use of the suggested approaches in a wider range of different contexts.

Conditions for EFL learning and professional development : Finland-Swedish learner and teacher perspectives

Engelskans dominerande roll som internationellt språk och andra globaliseringstrender påverkar också Svenskfinland. Dessa trender påverkar i sin tur förutsättningarna för lärande och undervisning i engelska som främmande språk, det vill säga undervisningsmålen, de förväntade elev- och lärarroller, materialens ändamålsenlighet, lärares och elevers initiala erfarenheter av engelska och engelskspråkiga länder. Denna studie undersöker förutsättningarna för lärande och professionell utveckling i det svenskspråkiga nybörjarklassrummet i engelska som främmande språk. Utgångsläget för 351 nybörjare i engelska som främmande språk och 19 av deras lärare beskrivs och analyseras. Resultaten tyder på att engelska håller på att bli ett andraspråk snarare än ett traditionellt främmande språk för många unga elever. Dessa elever har också goda förutsättningar att lära sig engelska utanför skolan. Sådan var dock inte situationen för alla elever, vilket tyder på att det finns en anmärkningsvärd heterogenitet och även regional variation i det finlandssvenska klassrummet i engelska som främmande språk. Lärarresultaten tyder på att vissa lärare har klarat av att på ett konstruktivt sätt att tackla de förutsättningar de möter. Andra lärare uttrycker frustration över sin arbetssituation, läroplanen, undervisningsmaterialen och andra aktörer som kommer är av betydelse för skolmiljön. Studien påvisar att förutsättningarna för lärande och undervisning i engelska som främmande språk varierar i Svenskfinland. För att stöda elevers och lärares utveckling föreslås att dialogen mellan aktörer på olika nivå i samhället bör förbättras och systematiseras.

Loss Modelling of Three-Level Inverters controlled with Space Vector Modulation Technique

The objective of this master’s thesis is to investigate the loss behavior of three-level ANPC inverter and compare it with conventional NPC inverter. The both inverters are controlled with mature space vector modulation strategy. In order to provide the comparison both accurate and detailed enough NPC and ANPC simulation models should be obtained. The similar control model of SVM is utilized for both NPC and ANPC inverter models. The principles of control algorithms, the structure and description of models are clarified. The power loss calculation model is based on practical calculation approaches with certain assumptions. The comparison between NPC and ANPC topologies is presented based on results obtained for each semiconductor device, their switching and conduction losses and efficiency of the inverters. Alternative switching states of ANPC topology allow distributing losses among the switches more evenly, than in NPC inverter. Obviously, the losses of a switching device depend on its position in the topology. Losses distribution among the components in ANPC topology allows reducing the stress on certain switches, thus losses are equally distributed among the semiconductors, however the efficiency of the inverters is the same. As a new contribution to earlier studies, the obtained models of SVM control, NPC and ANPC inverters have been built. Thus, this thesis can be used in further more complicated modelling of full-power converters for modern multi-megawatt wind energy conversion systems.

Knowledge sharing in intrafirm networks in organization

The objective of this study was research the shared knowledge and the means of sharing with the help of social network analysis. The purpose of this study was to give descriptive information to case-organization about its situational network status in different units. The premise of the study is the success of organizational competences and networks, especially when it comes to the sharing of knowledge. The research was accomplished in a TEKES –projects, Developing Network-Based Services – The Role of Competences and Networks COMNET –projects case-organization. Lappeenranta School of Business and the case-organization started the project in co-operation. The baseline for the study was organizational competencies and organizational networks as success factors, especially from the knowledge sharing’s point of view. The research was based on triangulation, which included pre-interviews, network analyses accomplished by Webropol –e-mail survey and qualitative interviews. The results indicated that regular unit meetings were experienced to be the most important method of knowledge sharing along with e-mailing, intranet and weekly bulletins. The co-operation between units was also experienced to be important when evaluating knowledge sharing and communication. The intrafirm network was experienced tight. Dispersed units and partly unclear means of information sharing were the biggest obstacles for information communication. Knowledge sharing, communication with others and trainings were seen important in the case-organization.

Software Development Process Modeling. Developers Perspective to Contemporary Modeling Techniques

Formal software development processes and well-defined development methodologies are nowadays seen as the definite way to produce high-quality software within time-limits and budgets. The variety of such high-level methodologies is huge ranging from rigorous process frameworks like CMMI and RUP to more lightweight agile methodologies. The need for managing this variety and the fact that practically every software development organization has its own unique set of development processes and methods have created a profession of software process engineers. Different kinds of informal and formal software process modeling languages are essential tools for process engineers. These are used to define processes in a way which allows easy management of processes, for example process dissemination, process tailoring and process enactment. The process modeling languages are usually used as a tool for process engineering where the main focus is on the processes themselves. This dissertation has a different emphasis. The dissertation analyses modern software development process modeling from the software developers’ point of view. The goal of the dissertation is to investigate whether the software process modeling and the software process models aid software developers in their day-to-day work and what are the main mechanisms for this. The focus of the work is on the Software Process Engineering Metamodel (SPEM) framework which is currently one of the most influential process modeling notations in software engineering. The research theme is elaborated through six scientific articles which represent the dissertation research done with process modeling during an approximately five year period. The research follows the classical engineering research discipline where the current situation is analyzed, a potentially better solution is developed and finally its implications are analyzed. The research applies a variety of different research techniques ranging from literature surveys to qualitative studies done amongst software practitioners. The key finding of the dissertation is that software process modeling notations and techniques are usually developed in process engineering terms. As a consequence the connection between the process models and actual development work is loose. In addition, the modeling standards like SPEM are partially incomplete when it comes to pragmatic process modeling needs, like light-weight modeling and combining pre-defined process components. This leads to a situation, where the full potential of process modeling techniques for aiding the daily development activities can not be achieved. Despite these difficulties the dissertation shows that it is possible to use modeling standards like SPEM to aid software developers in their work. The dissertation presents a light-weight modeling technique, which software development teams can use to quickly analyze their work practices in a more objective manner. The dissertation also shows how process modeling can be used to more easily compare different software development situations and to analyze their differences in a systematic way. Models also help to share this knowledge with others. A qualitative study done amongst Finnish software practitioners verifies the conclusions of other studies in the dissertation. Although processes and development methodologies are seen as an essential part of software development, the process modeling techniques are rarely used during the daily development work. However, the potential of these techniques intrigues the practitioners. As a conclusion the dissertation shows that process modeling techniques, most commonly used as tools for process engineers, can also be used as tools for organizing the daily software development work. This work presents theoretical solutions for bringing the process modeling closer to the ground-level software development activities. These theories are proven feasible by presenting several case studies where the modeling techniques are used e.g. to find differences in the work methods of the members of a software team and to share the process knowledge to a wider audience.

The Fedora "Secret Sauce"

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

The collective dimension of freedom of religion or belief in international law : the application of findings to the case of Turkey

Pertinent domestic and international developments involving issues related to tensions affecting religious or belief communities have been increasingly occupying the international law agenda. Those who generate and, thus, shape international law jurisprudence are in the process of seeking some of the answers to these questions. Thus the need for reconceptualization of the right to freedom of religion or belief continues as demands to the right to freedom of religion or belief challenge the boundaries of religious freedom in national and international law. This thesis aims to contribute to the process of “re-conceptualization” by exploring the notion of the collective dimension of freedom of religion or belief with a view to advance the protection of the right to freedom of religion or belief. The case of Turkey provides a useful test case where both the domestic legislation can be assessed against international standards, while at the same time lessons can be drawn for the improvement of the standard of international review of the protection of the collective dimension of freedom of religion or belief. The right to freedom of religion or belief, as enshrined in international human rights documents, is unique in its formulation in that it provides protection for the enjoyment of the rights “in community with others”.1 It cannot be realized in isolation; it crosses categories of human rights with aspects that are individual, aspects that can be effectively realized only in an organized community of individuals and aspects that belong to the field of economic, social and cultural rights such as those related to religious or moral education. This study centers on two primary questions; first, what is the scope and nature of protection afforded to the collective dimension of freedom of religion or belief in international law, and, secondly, how does the protection of the collective dimension of freedom of religion or belief in Turkey compare and contrast to international standards? Section I explores and examines the notion of the collective dimension of freedom of religion or belief, and the scope of its protection in international law with particular reference to the right to acquire legal personality and autonomy religious/belief communities. In Section II, the case study on Turkey constitutes the applied part of the thesis; here, the protection of the collective dimension is assessed with a view to evaluate the compliance of Turkish legislation and practice with international norms as well as seeking to identify how the standard of international review of the collective dimension of freedom of religion or belief can be improved.

Bayesian classification of forest ecological type from satellite data

The main objective of this study was todo a statistical analysis of ecological type from optical satellite data, using Tipping's sparse Bayesian algorithm. This thesis uses "the Relevence Vector Machine" algorithm in ecological classification betweenforestland and wetland. Further this bi-classification technique was used to do classification of many other different species of trees and produces hierarchical classification of entire subclasses given as a target class. Also, we carried out an attempt to use airborne image of same forest area. Combining it with image analysis, using different image processing operation, we tried to extract good features and later used them to perform classification of forestland and wetland.

Induction motor versus permanent magnet synchronous motor in motion control applications: a comparative study

High dynamic performance of an electric motor is a fundamental prerequisite in motion control applications, also known as servo drives. Recent developments in the field of microprocessors and power electronics have enabled faster and faster movements with an electric motor. In such a dynamically demanding application, the dimensioning of the motor differs substantially from the industrial motor design, where feasible characteristics of the motor are for example high efficiency, a high power factor, and a low price. In motion control instead, such characteristics as high overloading capability, high-speed operation, high torque density and low inertia are required. The thesis investigates how the dimensioning of a high-performance servomotor differs from the dimensioning of industrial motors. The two most common servomotor types are examined; an induction motor and apermanent magnet synchronous motor. The suitability of these two motor types indynamically demanding servo applications is assessed, and the design aspects that optimize the servo characteristics of the motors are analyzed. Operating characteristics of a high performance motor are studied, and some methods for improvements are suggested. The main focus is on the induction machine, which is frequently compared to the permanent magnet synchronous motor. A 4 kW prototype induction motor was designed and manufactured for the verification of the simulation results in the laboratory conditions. Also a dynamic simulation model for estimating the thermal behaviour of the induction motor in servo applications was constructed. The accuracy of the model was improved by coupling it with the electromagnetic motor model in order to take into account the variations in the motor electromagnetic characteristics due to the temperature rise.

Portable Application User Interface Development in Symbian OS

Symbian OS on käyttöjärjestelmä edistyneille matkapuhelimille. Symbiania käyttävistä laitteista on monia muunnoksia. Joitakin käytetään näppäimistön avulla ja toisia kynällä. Näytön mittasuhteet ja muut ominaisuudet vaihtelevat huomattavasti älypuhelimista kommunikaattoreihin. Tämän seurauksena Symbianin eri laiteperheiden viitemallien käyttöliittymäosat ovat sovelluskehittäjän kannalta melko erilaisia. Esimerkiksi kaikki käyttöliittymäkomponentit eivät ole saatavilla kaikissa laiteperheissä. Perinteisesti sovellusten käyttöliittymät on kirjoitettu erikseen kullekin laiteperheelle, mikä pidentää kehitysaikaa. Tämä työ esittelee Symbianin käyttöliittymäarkkitehtuurin, siirrettävyyden käsitteen ja tekniikoita sovellusten suunnitteluun ja toteutukseen, joilla saavutetaan parempi siirrettävyys Symbian-ympäristössä. Työssä suunnitellaan ja toteutetaan AppTest-nimisen testaustyökalun käyttöliittymä siten, että sovellus on helposti siirrettävissä eri laiteperheisiin.

Disc Filter External Models in an Integrated Simulation Environment

Työssä tutkittiin kiekkosuodattimeen liittyviä ulkoisia simulointimalleja integroidussa simulointiympäristössä. Työn tarkoituksena oli parantaa olemassa olevaa mekanistista kiekkosuodatinmallia. Malli laadittiin dynaamiseen paperiteollisuuden tarpeisiin tehtyyn simulaattoriin (APMS), jossa olevaan alkuperäiseen mekanistiseen malliin tehtiin ulkoinen lisämalli, joka käyttää hyväkseen kiekkosuodatinvalmistajan mittaustuloksia. Laitetiedon saatavuutta suodattimien käyttäjille parannettiin luomalla Internetissä sijaitsevalle palvelimelle kiekkosuodattimen laitetietomäärittelyt. Suodatinvalmistaja voi palvella asiakkaitaan viemällä laitetiedot palvelimelle ja yhdistämällä laitetiedon simulointimalliin. Tämä on mahdollista Internetin ylitse käytettävän integroidun simulointiympäristön avulla, jonka on tarkoitus kokonaisvaltaisesti yhdistää simulointi ja prosessisuunnittelu. Suunnittelijalle tarjotaan työkalut, joilla dynaaminen simulointi, tasesimulointi ja kaavioiden piirtäminen onnistuu prosessilaitetiedon ollessa saatavilla. Nämä työkalut on tarkoitus toteuttaa projektissa nimeltä Galleria, jossa luodaan prosessimalli- ja laitetietopalvelin Internetiin. Gallerian käyttöliittymän avulla prosessisuunnittelija voi käyttää erilaisia simulointiohjelmistoja ja niihin luotuja valmiita malleja, sekä saada käsiinsä ajan tasalla olevaa laitetietoa. Ulkoinen kiekkosuodatinmalli laskee suodosvirtaamat ja suodosten pitoisuudet likaiselle, kirkkaalle ja superkirkkaalle suodokselle. Mallin syöttöparametrit ovat kiekkojen pyörimisnopeus, sisään tulevan syötön pitoisuus, suotautuvuus (freeness) ja säätöparametri, jolla säädetään likaisen ja kirkkaan suodoksen keskinäinen suhde. Suotautuvuus kertoo mistä massasta on kyse. Mitä suurempi suotautuvuus on, sitä paremmin massa suodattuu ja sitä puhtaampia suodokset yleensä ovat. Mallin parametrit viritettiin regressioanalyysillä ja valmistajan palautetta apuna käyttäen. Käyttäjä voi valita haluaako hän käyttää ulkoista vai alkuperäistä mallia. Alkuperäinen malli täytyy ensin alustaa antamalla sille nominaaliset toimintapisteet virtaamille ja pitoisuuksille tietyllä pyörimisnopeudella. Ulkoisen mallin yhtälöitä voi käyttää alkuperäisen mallin alustamiseen, jos alkuperäinen malli toimii ulkoista paremmin. Ulkoista mallia voi käyttää myös ilman simulointiohjelmaa Galleria-palvelimelta käsin. Käyttäjälle avautuu näin mahdollisuus tarkastella kiekkosuodattimien parametreja ja nähdä suotautumistulokset oman työasemansa ääreltä mistä tahansa, kunhan Internetyhteys on olemassa. Työn tuloksena kiekkosuodattimien laitetiedon saatavuus käyttäjille parani ja alkuperäisen simulointimallin rajoituksia ja puutteita vähennettiin.

Partnership-hankintasuhteen solmiminen sekä operatiivisen ostotoiminnan kehittäminen pumppualan yrityksessä.

Työn tavoitteena oli luoda hankintalogistiikan kehittämisen toimintamalli, sekä testata sitä yhden raaka-ainetoimittajan kanssa. Nykytilan kartoituksella havaittiin selkeästi nykyisen ostostrategian sekä operatiivisten ostotoimenpiteiden kehittämisen tarve. Erityisen selvä heikkous on nykyisten toimittajien suuri lukumäärä. Jatkossa tulisi keskittyä ostovoiman lisäämiseen ja pyrkiä entistä pidempiin yhteistyösopimuksiin. Työssä suunniteltiin valitun toimittajan ja yrityksen tarpeet sekä vaatimukset huomioiva hankintamalli. Kyseisen hankintamallin parametrien laskemiseksi sekä toimitusten valvomiseksi tehtiin Microsoft Excel -ohjelmalla pilottityökalu operatiiviselle hankintatoiminnalle. Yrityksen hankintatoiminnan kehittämiseksi tulisi keskittyä toimittajien lukumäärän sekä ostorutiinien vähentämiseen, tuotteiden ja nimikkeiden tehokkaaseen luokittelemiseen, tieto- ja tietoliikennetekniikan hyödyntämiseen hankintatoiminnan ja tuotannonohjauksen työkaluna sekä toimittajien toiminnan tehostamiseen yhteistyötä lisäämällä.