Acidic dissolution of iron oxides and regeneration of a ceramic filter medium

The dewatering of iron ore concentrates requires large capacity in addition to producing a cake with low moisture content. Such large processes are commonly energy intensive and means to lower the specific energy consumption are needed. Ceramic capillary action disc filters incorporate a novel filter medium enabling the harnessing of capillary action, which results in decreased energy consumption in comparison to traditional filtration technologies. As another benefit, the filter medium is mechanically and chemically more durable than, for example, filter cloths and can, thus, withstand harsh operating conditions and possible regeneration better than other types of filter media. In iron ore dewatering, the regeneration of the filter medium is done through a combination of several techniques: (1) backwashing, (2) ultrasonic cleaning, and (3) acid regeneration. Although it is commonly acknowledged that the filter medium is affected by slurry particles and extraneous compounds, published research, especially in the field of dewatering of mineral concentrates, is scarce. Whereas the regenerative effect of backwashing and ultrasound are more or less mechanical, regeneration with acids is based on chemistry. The chemistry behind the acid regeneration is, naturally, dissolution. The dissolution of iron oxide particles has been extensively studied over several decades but those studies may not necessarily be directly applicable in the regeneration of the filter medium which has undergone interactions with the slurry components. The aim of this thesis was to investigate if free particle dissolution indeed correlates with the regeneration of the filter medium. For this purpose, both free particle dissolution and dissolution of surface adhered particles were studied. The focus was on acidic dissolution of iron oxide particles and on the study of the ceramic filter medium used in the dewatering of iron ore concentrates. The free particle dissolution experiments show that the solubility of synthetic fine grained iron oxide particles in oxalic acid could be explained through linear models accounting for the effects of temperature and acid concentration, whereas the dissolution of a natural magnetite is not so easily explained by such models. In addition, the kinetic experiments performed both support and contradict the work of previous authors: the suitable kinetic model here supports previous research suggesting solid state reduction to be the reaction mechanism of hematite dissolution but the formation of a stable iron oxalate is not supported by the results of this research. Several other dissolution mechanisms have also been suggested for iron oxide dissolution in oxalic acid, indicating that the details of oxalate promoted reductive dissolution are not yet agreed and, in this respect, this research offers added value to the community. The results of the regeneration experiments with the ceramic filter media show that oxalic acid is highly effective in removing iron oxide particles from the surface of the filter medium. The dissolution of those particles did not, however, exhibit the expected behaviour, i.e. complete dissolution. The results of this thesis show that although the regeneration of the ceramic filter medium with acids incorporates the dissolution of slurry particles from the surface of the filter medium, the regeneration cannot be assessed purely based upon free particle dissolution. A steady state, dependent on temperature and on the acid concentration, was observed in the dissolution of particles from the surface even though the limit of solubility of free iron oxide particles had not been reached. Both the regeneration capacity and efficiency, with regards to the removal of iron oxide particles, was found to be temperature dependent, but was not affected by the acid concentration. This observation further suggests that the removal of the surface adhered particles does not follow the dissolution of free particles, which do exhibit a dependency on the acid concentration. In addition, changes in the permeability and in the pore structure of the filter medium were still observed after the bulk concentration of dissolved iron had reached a steady state. Consequently, the regeneration of the filter medium continued after the dissolution of particles from the surface had ceased. This observation suggests that internal changes take place at the final stages of regeneration. The regeneration process could, in theory, be divided into two, possibly overlapping, stages: (1) dissolution of surface-adhered particles, and (2) dissolution of extraneous compounds from within the pore structure. In addition to the fundamental knowledge generated during this thesis, tools to assess the effects of parameters on the regeneration of the ceramic filter medium are needed. It has become clear that the same tools used to estimate the dissolution of free particles cannot be used to estimate the regeneration of a filter medium unless only a robust characterisation of the order of regeneration efficiency is needed.

The role of metal ions in selective and sustainable processes

Sustainability and recycling are core values in today’s industrial operations. New materials, products and processes need to be designed in such a way as to consume fewer of the diminishing resources we have available and to put as little strain on the environment as possible. An integral part of this is cleaning and recycling. New processes are to be designed to improve the efficiency in this aspect. Wastewater, including municipal wastewaters, is treated in several steps including chemical and mechanical cleaning of waters. Well-cleaned water can be recycled and reused. Clean water for everyone is one of the greatest challenges we are facing today. Ferric sulphate, made by oxidation from ferrous sulphate, is used in water purification. The oxidation of ferrous sulphate, FeSO4, to ferric sulphate in acidic aqueous solutions of H2SO4 over finely dispersed active carbon particles was studied in a vigorously stirred batch reactor. Molecular oxygen was used as the oxidation agent and several catalysts were screened: active carbon, active carbon impregnated with Pt, Rh, Pd and Ru. Both active carbon and noble metal-active carbon catalysts enhanced the oxidation rate considerably. The order of the noble metals according to the effect was: Pt >> Rh > Pd, Ru. By the use of catalysts, the production capacities of existing oxidation units can be considerably increased. Good coagulants have a high charge on a long polymer chain effectively capturing dirty particles of the opposite charge. Analysis of the reaction product indicated that it is possible to obtain polymeric iron-based products with good coagulation properties. Systematic kinetic experiments were carried out at the temperature and pressure ranges of 60B100°C and 4B10 bar, respectively. The results revealed that both non-catalytic and catalytic oxidation of Fe2+ to Fe3+ take place simultaneously. The experimental data were fitted to rate equations, which were based on a plausible reaction mechanism: adsorption of dissolved oxygen on active carbon, electron transfer from Fe2+ ions to adsorbed oxygen and formation of surface hydroxyls. A comparison of the Fe2+ concentrations predicted by the kinetic model with the experimentally observed concentrations indicated that the mechanistic rate equations were able to describe the intrinsic oxidation kinetics of Fe2+ over active carbon and active carbon-noble metal catalysts. Engineering aspects were closely considered and effort was directed to utilizing existing equipment in the production of the new coagulant. Ferrous sulphate can be catalytically oxidized to produce a novel long-chained polymeric iron-based flocculent in an easy and affordable way in existing facilities. The results can be used for modelling the reactors and for scale-up. Ferric iron (Fe3+) was successfully applied for the dissolution of sphalerite. Sphalerite contains indium, gallium and germanium, among others, and the application can promote their recovery. The understanding of the reduction process of ferric to ferrous iron can be used to develop further the understanding of the dissolution mechanisms and oxidation of ferrous sulphate. Indium, gallium and germanium face an ever-increasing demand in the electronics industry, among others. The supply is, however, very limited. The fact that most part of the material is obtained through secondary production means that real production quota depends on the primary material production. This also sets the pricing. The primary production material is in most cases zinc and aluminium. Recycling of scrap material and the utilization of industrial waste, containing indium, gallium and geranium, is a necessity without real options. As a part of this study plausible methods for the recovery of indium, gallium and germanium have been studied. The results were encouraging and provided information about the precipitation of these valuables from highly acidic solutions. Indium and gallium were separated from acidic sulphuric acid solutions by precipitation with basic sulphates such as alunite or they were precipitated as basic sulphates of their own as galliunite and indiunite. Germanium may precipitate as a basic sulphate of a mixed composition. The precipitation is rapid and the selectivity is good. When the solutions contain both indium and gallium then the results show that gallium should be separated before indium to achieve a better selectivity. Germanium was separated from highly acidic sulphuric acid solutions containing other metals as well by precipitating with tannic acid. This is a highly selective method. According to the study other commonly found metals in the solution do not affect germanium precipitation. The reduction of ferric iron to ferrous, the precipitation of indium, gallium and germanium, and the dissolution of the raw materials are strongly depending on temperature and pH. The temperature and pH effect were studied and which contributed to the understanding and design of the different process steps. Increased temperature and reduced pH improve the reduction rate. Finally, the gained understanding in the studied areas can be employed to develop better industrial processes not only on a large scale but also increasingly on a smaller scale. The small amounts of indium, gallium and germanium may favour smaller and more locally bound recovery.

Pathogen derived resistance to Potato virus Y: mechanisms and risks

Selostus: Patogeenivälitteinen, siirtogeeninen kestävyys perunan Y-virusta vastaan: mekanismit ja riskit

Regulatory Mechanisms involved in Th2 Cell Differentiation. A Proteomics Approach.

Th2-solujen erilaistumista ohjaavat säätelyverkostot ja niiden tutkiminen proteomiikan avulla Astma ja allergiat ovat laajalle levinneitä ja vakavia sairauksia, joista kärsivät miljoonat ihmiset ympäri maailmaa. Koe-eläimillä tehdyt tutkimukset osoittavat, että interleukiini-4 (IL-4) on tärkeä allergisen astman ja allergioiden kehittymiselle ja kroonistumiselle. Se ohjaa T-auttajasolujen (Th-solujen) kehittymistä Th2-tyypin soluiksi, joilla on merkittävä rooli näiden tautien puhkeamisessa. Th2-solut tuottavat myös itse IL-4:ä, joka edesauttaa taudin seuraavien vaiheiden kehittymistä. Erityisesti STAT6-proteiini, joka aktivoituu IL-4-stimulaation seurauksena, on tarpeen Th2- vasteen syntymiselle ja kroonistumiselle antigeenin aiheuttamassa keuhkoputkien astmaattisessa tulehduksessa. Väitöskirjatyöni tarkoituksena oli käyttää kaksidimensionaaliseen elektroforeesiin (2- DE) perustuvaa proteomiikkaa ja massaspektrometriaa uusien Th2-solujen erilaistumista säätelevien proteiinien tunnistamiseksi. Erilaistumattomat Th-solut eristettiin vastasyntyneen napaverestä tai hiiren pernasta. Solut aktivoitiin Tsolureseptorin ja ns. ko-stimulatoristen reseptorien kautta ja erilaistettiin joko Th1- tai Th2-suuntaan vastaavasti erilaistavien IL-12- ja IL-4-sytokiinien avulla. Ensimmäisessä tutkimuksessa in vitro -erilaistettujen Th1- ja Th2-solujen proteomeja verrattiin keskenään proteiinien ilmenemisessä tai proteiinimodifikaatioissa olevien erojen tunnistamiseksi. Kaksi muuta päätutkimusta keskittyivät IL-4:n aiheuttamaan proteiinitason säätelyyn ensimmäisen vuorokauden aikana T-soluaktivaation jälkeen. Näistä ensimmäisessä IL-4:n aiheuttamia eroja tunnistettiin aktivoiduista ihmisen Thsoluista. IL-4:n todettiin säätelevän useita proteiineja kaspaasien välittämissä signalointiteissä sekä lisäävän T-solujen elävyyttä ja aktivoitumista. Toisessa tutkimuksessa STAT6-poistogeenisten hiirien lymfosyyttien proteomia verrattiin villityypin kontrollisoluihin T-soluaktivaation ja IL-4-stimulaation jälkeen. Näissä tutkimuksissa karakterisoitiin useita uusia IL-4:n ja STAT6:n kohdeproteiineja ja löydettiin uusia säätelyverkostoja. Tutkimustulokset ovat johtaneet uusiin Th2-erilaistumismekanismeja koskeviin hypoteeseihin.

Separation mechanisms in nanofiltration and retention changes of organic compounds

Orgaanisten yhdisteiden negatiivinen retentio nanosuodatuksessa on ilmiö, jota eiole kovin paljon tutkittu. Negatiivisen retentioon vaikuttavat syyt tai tekijäteivät ole kovin hyvin tiedossa. Erotusmenetelmänä negatiivinen retentio voi olla käyttökelpoinen tietyissä sovelluksissa. Työn kirjallisuusosa käsittelee nanosuodatuksen erotusmekanismeja ja retentioon vaikuttavia tekijöitä. Myös joitakin malleja on esitetty. Nanosuodatus on monimutkainen prosessi, josta ei voida löytää vain yhtä erotusmekanismia tai retentioon vaikuttavaa tekijää. Prosessit ovat kokonaisuuksia, joissa erottumiseen vaikuttavat syöttöliuoksen, erotettavan komponentin ja kalvon ominaisuudet, ja niiden väliset vuorovaikutukset. Työn kokeellisessa osassa koottiin mahdollisimman paljon esimerkkejä, joissa monosakkaridien negatiivinen retentio ilmenee. Muita orgaanisia ja epäorgaanisia yhdisteitä käytettiin 'häiriöyhdisteinä' syöttöliuoksessa monosakkaridien kanssa. Kokeet suoritettiin kahdella laboratoriomittakaavan suodatuslaitteella käyttäen kahta kaupallista nanosuodatuskalvoa. Negatiivinen retentio ilmeni useissa tapauksissa. Permeaattivuon ja 'häiriöyhdisteiden' pitoisuuksien havaittiin vaikuttavan voimakkaasti negatiivisen retention ilmenemiseen.

Optimization of the procedure for removing iron deposits on ceramic filter media

In this thesis, cleaning of ceramic filter media was studied. Mechanisms of fouling and dissolution of iron compounds, as well as methods for cleaning ceramic membranes fouled by iron deposits were studied in the literature part. Cleaning agents and different methods were closer examined in the experimental part of the thesis. Pyrite is found in the geologic strata. It is oxidized to form ferrous ions Fe(II) and ferric ions Fe(III). Fe(III) is further oxidized in the hydrolysis to form ferric hydroxide. Hematite and goethite, for instance, are naturally occurring iron oxidesand hydroxides. In contact with filter media, they can cause severe fouling, which common cleaning techniques competent enough to remove. Mechanisms for the dissolution of iron oxides include the ligand-promoted pathway and the proton-promoted pathway. The dissolution can also be reductive or non-reductive. The most efficient mechanism is the ligand-promoted reductive mechanism that comprises two stages: the induction period and the autocatalytic dissolution.Reducing agents(such as hydroquinone and hydroxylamine hydrochloride), chelating agents (such as EDTA) and organic acids are used for the removal of iron compounds. Oxalic acid is the most effective known cleaning agent for iron deposits. Since formulations are often more effective than organic acids, reducing agents or chelating agents alone, the citrate¿bicarbonate¿dithionite system among others is well studied in the literature. The cleaning is also enhanced with ultrasound and backpulsing.In the experimental part, oxalic acid and nitric acid were studied alone andin combinations. Also citric acid and ascorbic acid among other chemicals were tested. Soaking experiments, experiments with ultrasound and experiments for alternative methods to apply the cleaning solution on the filter samples were carried out. Permeability and ISO Brightness measurements were performed to examine the influence of the cleaning methods on the samples. Inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis of the solutions was carried out to determine the dissolved metals.

Absorptive capacity and the effect of social integration mechanisms in knowledge utilization

Tiedosta on tullut määräävä tekijä yrityksensuorituskyvylle. Yritykset hankkivat aktiivisesti uutta tietoa ulkoisesta ympäristöstään ja tallentavat sitä tietokantoihinsa. Uusi tieto on innovaatioiden ja uusien ideoiden peruselementti. Uudet ideat pitää myös kaupallistaa, jotta niiden avulla voidaan hankkia kilpailuetua. Absorptiivisen kapasiteetin malli yhdistää tiedon prosessointiin liittyvät kyvykkyydet, jotka vaikuttavat yrityksen kykyyn hyödyntää tietoa tehokkaasti. Ennen kuin tietoa voidaan käyttää uusien tuotteiden ja palveluiden luomiseen, täytyy sitä jakaa yrityksessä ja muuttaa se yrityksen toimintaa palvelevaksi. Aiemmissa tutkimuksissa innovaatiot ovat vahvasti liitetty yrityksen kykyyn uudistua. Tämä pro gradu -tutkielma tutkii sosiaalisten integraatiomekanismien vaikutusta potentiaalisen absorptiivisen kapasiteetin muuttamiseen toteutuneeksi absorptiiviseksi kapasiteetiksi. Yksilöiden ja osastojen välisen yhteistyön sekä luottamuksen vaikutus tiedon sisäistämiseen tutkittiin. Tutkielma pohjautuu monikansallisessa yrityksessä keväällä 2006 suoritettuun uudistumiskyky-tutkimukseen. Tutkielma keskittyy yrityksen kykyyn uudistua uuden tiedon ja innovaatioiden avulla. Tutkielma on kvantitatiivinen tapaustutkimus. Tutkielmassa tehtyjen havaintojen mukaan sosiaaliset integraatiomekanismit ovat tärkeitä uuden tiedon hyödyntämisessä. Tiedon eksplisiittyyden havaitaan vaikuttavan tiedon muuttamiseen yritykselle hyödylliseksi resurssiksi.

Lannoitetehtaan typenoksidipäästöjen hallintamahdollisuudet

Työssä tarkasteltiin lannoitetehtaan typenoksidipäästöjen hallintamahdollisuuksia Kemira GrowHow Oy:n Uudenkaupungin tehtailla. Työn tavoitteena oli lannoitetehtaalta muodostuvien typen oksidien syntymekanismien etsiminen. Lisäksi työssä etsittiin sellaisia keinoja, joilla typenoksidipäästöjä voitaisiin hallita. Tutkimusosassa tehtiin mittauksia kannettavalla FT-IR kaasuanalysaattorilla teoreettisen tarkastelun tueksi sekä prosessikohtaisten päästöjen selvittämiseksi. Prosessista tehtyjen mittausten lisäksi työssä on hyödynnetty lannoitetehtaan piippuun asennettua kiinteää FT-IR analysaattoria. Prosessikohtaiset mittaukset rajattiin lannoite 2-tehtaaseen. Mittauksia suoritettiin kuudesta prosessin pisteestä. Hallintamahdollisuuksien selvittämiseksi tehtiin tutkimuksia tietyillä raaka-aineiden syötöillä. Päästöjen prosessikohtaista arvioimista varten suoritettiin myös pitot-mittauksia kaasumäärien selvittämiseksi. Mittauksissa havaittiin, että typenoksidipäästöt riippuvat valmistettavasta lajikkeesta. Suurimmaksi typenoksidipäästöjen lähteeksi osoittautuivat reaktorit, joiden osuus oli jopa 95 % typenoksidipäästöistä. Tärkein oli biotiittireaktori, jonka osuus typenoksidipäästöistä oli noin 60-90 %. Lajikkeilla, joilla ei käytetä biotiittireaktoria, osoittautui suurimmaksi typenoksidipäästöjen lähteeksi ammonointireaktorit. Hallintamahdollisuuksia pyrittiin etsimään reaktoreilta. Suurimmaksi typen oksidien hallintamahdollisuudeksi osoittautui ureafosfaatin syöttö liuotus- ja biotiittireaktoreille. Tutkimuksissa havaittiin myös laimean rikkihapon käyttämisen, väkevän sijasta, auttavan hallitsemaan typenoksidipäästöjä.

Regulating Mechanisms of Gonadal and Pituitary Tumorigenesis in Mice Producing Human Chorionic Gonadotropin

Human chorionic gonadotropin (hCG) and luteinizing hormone (LH) are structurally and functionally similar glycoprotein hormones acting through the same luteinizing hormone chorionic gonadotropin receptor (LHCGR). The functions of LH in reproduction and hCG in pregnancy are well known. Recently, the expression of LHCGR has been found in many nongonadal tissues and cancers, and this has raised the question of whether LH/hCG could affect the function or tumorigenesis of these nongonadal tissues. We have also previously generated an hCG expressing mouse model presenting nongonadal phenotypes. Using this model it is possible to improve our understanding of nongonadal action of highly elevated LH/hCG. In the current study, we analyzed the effect of moderately and highly elevated hCG levels on male reproductive development and function. The main finding was the appearance of fetal Leydig cell (FLC) adenomas in prepubertal males. However, the development and differentiation of FLCs were not significantly affected. We also show that the function of hCG is different in FLCs and in adult Leydig cells (ALC), because in the latter cells hCG was not able to induce tumorigenesis. In FLCs, LHCGR is not desensitized or downregulated upon ligand binding. In this study, we found that the testicular expression of two G protein-coupled receptor kinases responsible for receptor desensitization or downregulation is increased in adult testis. Results suggest that the lack of LHCGR desensitization or downregulation in FLCs protect testosterone (Te) synthesis, but also predispose FLCs for LH/hCG induced adenomas. However, all the hCG induced nongonadal changes observed in male mice were possible to explain by the elevated Te level found in these males. Our findings indicate that the direct nongonadal effects of elevated LH/hCG in males are not pathophysiologically significant. In female mice, we showed that an elevated hCG level was able to induce gonadal tumorigenesis. hCG also induced the formation of pituitary adenomas (PA), but the mechanism was indirect. Furthermore, we found two new potential risk factors and a novel hormonally induced mechanism for PAs. Increased progesterone (P) levels in the presence of physiological estradiol (E2) levels induced the formation of PAs in female mice. E2 and P induced the expression and nuclear localization of a known cell-cycle regulator, cyclin D1. A calorie restricted diet was also able to prevent the formation of PAs, suggesting that obesity is able to promote the formation of PAs. Hormone replacement therapy after gonadectomy and hormone antagonist therapy showed that the nongonadal phenotypes observed in hCG expressing female mice were due to ovarian hyperstimulation. A slight adrenal phenotype was evident even after gonadectomy in hCG expressing females, but E2 and P replacement was able to induce a similar phenotype in WT females without elevated LH/hCG action. In conclusion, we showed that the direct effects of elevated hCG/LH action are limited only to the gonads of both sexes. The nongonadal phenotypes observed in hCG expressing mice were due to the indirect, gonadal hormone mediated effects of elevated hCG. Therefore, the gonads are the only physiologically significant direct targets of LHCGR signalling.

Thermoplastic bioactive composite – with special reference to dissolution behaviour and tissue response

Bioactive glasses are surface-active ceramic materials which support and accelerate bone growth in the body. During the healing of a bone fracture or a large bone defect, fixation is often needed. The aim of this thesis was to determine the dissolution behaviour and biocompatibility of a composite consisting of poly(ε-caprolactone-co-DL-lactide) and bioactive glass (S53P4). In addition the applicability as an injectable material straight to a bone defect was assessed. In in vitro tests the dissolution behaviour of plain copolymer and composites containing bioactive glass granules was evaluated, as well as surface reactivity and the material’s capability to form apatite in simulated body fluid (SBF). The human fibroblast proliferation was tested on materials in cell culture. In in vivo experiments, toxicological tests, material degradation and tissue reactions were tested both in subcutaneous space and in experimental bone defects. The composites containing bioactive glass formed a unified layer of apatite on their surface in SBF. The size and amount of glass granules affected the degradation of polymer matrix, as well the material’s surface reactivity. In cell culture on the test materials the human gingival fibroblasts proliferated and matured faster compared with control materials. In in vitro tests a connective tissue capsule was formed around the specimens, and became thinner in the course of time. Foreign body cell reactions in toxicological tests were mild. In experimental bone defects the specimens with a high concentration of small bioactive glass granules (<45 μm) formed a dense apatite surface layer that restricted the bone ingrowth to material. The range of large glass granules (90-315 μm) with high concentrations formed the best bonding with bone, but slow degradation on the copolymer restricted the bone growth only in the superficial layers. In these studies, the handling properties of the material proved to be good and tissue reactions were mild. The reactivity of bioactive glass was retained inside the copolymer matrix, thus enabling bone conductivity with composites. However, the copolymer was noticed to degradate too slowly compared with the bone healing. Therefore, the porosity of the material should be increased in order to improve tissue healing.

Salmonella enterica– Mechanisms of fluoroquinolone and macrolide resistance

Salmonella enterica – Fluorokinoloni- ja makrolidiresistenssimekanisimit Vakavia salmonellainfektioita on pitkään hoidettu fluorokinoloniantibiooteilla, kuten siprofloksasiinilla. Fluorokinolonien runsas käyttö niin ihmisillä kuin eläimilläkin on kuitenkin johtanut fluorokinoloniresistenttien salmonellakantojen lisääntymiseen. Vuoteen 2002 asti kaikki matalan tason fluorokinoloniresistenssiä ilmentävät salmonellakannat olivat resistenttejä nalidiksiinihapolle, joka on vanha ensimmäisen polven kinoloniantibiootti jota ei enää käytetä infektioiden hoidossa. Vuonna 2003 havaitsimme aivan uudentyyppisen resistenssifenotyypin salmonelloissa. Kaikki uuden fenotyypin kannat osoittivat matalaa fluorokinoloniresistenssiä (MIC ≥0.125 mg/L), mutta useat kannat olivat yllättäen aikaisempaa herkempiä nalidiksiinihapolle (MIC ≤32 mg/L). Ilmiöllä on suuri merkitys salmonellan antibioottiherkkyyksien määrittämisessä, sillä jos kanta on ollut nalidiksiinihapolle herkkä, sitä on pidetty herkkänä myös fluorokinoloneille. Väitöskirjatyössä määritettiin vuosina 2003–2007 Suomessa kerättyjen kotimaisten ja ulkomaalaisten S. enterica -kantojen fluorokinoloniresistenssiä sekä tutkittiin uuden salmonellafenotyypin epidemiologiaa ja resistenssimekanismeja. Lisäksi tutkittiin salmonellan hoidossa mahdollisesti käyttökelpoisen makrolidiantibioottijohdannaisen, atsitromysiinin tehoa salmonelloihin ja erityisesti matalaa fluorokinoloniresistenssiä ilmentäviin kantoihin. Tutkimuksessa havaittiin, että matalaa fluorokinoloniresistenssiä osoittavien salmonellakantojen määrä vähenee. Lasku oli voimakkainta Kaakkois-Aasiasta tuoduissa kannoissa. Uusi resistenssifenotyyppi on plasmidivälitteinen ja qnr-geenit olivat ainoa plasmidivälitteinen kinoloniresistenssimekanismi, joka kannoista löydettiin. Myöskään kromosomaalisten gyrA, gyrB ja parE -geenien QRDR-alueelta ei löydetty fluorokinoloniresistenssiä aiheuttavia mutaatioita. Transformaatiolla osoitettiin qnr-plasmidien olevan siirtyviä ja uusi resistenssifenotyyppi saatiin ilmennettyä myös herkässä vastaanottajakannassa. Nämä tulokset osoittavat, että vaikka S. enterican qnr-fenotyyppi on toistaiseksi levinnyt pääasiassa Kaakkois-Aasiaan, se siirtyy helposti bakteerista toiseen ja tulee todennäköisesti aiheuttamaan hoito-ongelmia myös muualla maailmassa. Uudentyyppinen qnr-fenotyyppi voi olla vaikea havaita perinteisellä herkkyysmäärityksellä. Siksi laboratorioissa tulisi aina määrittää sekä siprofloksasiiniettä nalidiksiinihappoherkkyydet. Atsitromysiinin osoitettiin olevan herkkyysmääritysten mukaan tehokas salmonelloja kohtaan mukaanlukien matala-asteista fluorokinoloniresistenssiä ilmentävät bakteerikannat.

New mechanisms regulating human Th1 and Th2 cell differentiation

Selective development of human T helper (Th) cells into functionally distinct Th1 and Th2 subtypes plays an essential role in the host immune response towards pathogens. However, abnormal function or differentiation of these cells can lead to development of various autoimmune diseases as well as asthma and allergy. Therefore, identification of key factors and the molecular mechanisms mediating Th1 and Th2 cell differentiation is important for understanding the molecular mechanisms of these diseases. The goal of this study was to identify novel factors involved in the regulation of Th1 and Th2 differentiation processes. A new method was optimized for enrichment of transiently transfected resting human primary T lymphocytes, that allowed the study of the influence of genes of interest in human Th1/Th2 cell differentiation and other primary Th cell functions. Functional characterization of PRELI, a novel activation-induced protein in human Th cells, identified it as a mitochondrial protein involved in the regulation of Th cell differentiation and apoptosis. By influencing the intracellular redox state, PRELI induces mitochondrial apoptosis pathway and downregulates STAT6 and Th2 differentiation. The data suggested that Calpain, an oxidative stress induced cysteine protease, is involved as a mediator in PRELI-induced downregulation of STAT6. PIM serine/threonine-specific kinases were identified as new regulators of human Th1 cell differentiation. PIM1 and PIM2 kinases were shown to be preferentially expressed in Th1 cells as compared to Th2 cells. RNA interference studies showed that PIM kinases enhance the production of IFN, the hallmark cytokine produced by Th1 cells. They also induce the expression of the key Th1-driving factor T-bet and the IL-12 signaling pathway during early phases of Th1 cell differentiation. Taken together, new regulators of human T helper cell differentiation were identified in this study, which provides new insights into the signaling mechanisms controlling the selective activation of human Th cell subsets.