Synthesis, characterization and chemical sensor application of conducting polymers

Polymeric materials that conduct electricity are highly interesting for fundamental studies and beneficial for modern applications in e.g. solar cells, organic field effect transistors (OFETs) as well as in chemical and bio‐sensing. Therefore, it is important to characterize this class of materials with a wide variety of methods. This work summarizes the use of electrochemistry also in combination with spectroscopic methods in synthesis and characterization of electrically conducting polymers and other π‐conjugated systems. The materials studied in this work are intended for organic electronic devices and chemical sensors. Additionally, an important part of the presented work, concerns rational approaches to the development of water‐based inks containing conducting particles. Electrochemical synthesis and electroactivity of conducting polymers can be greatly enhanced in room temperature ionic liquids (RTILs) in comparison to conventional electrolytes. Therefore, poly(para‐phyenylene) (PPP) was electrochemically synthesized in the two representative RTILs: bmimPF6 and bmiTf2N (imidazolium and pyrrolidinium‐based salts, respectively). It was found that the electrochemical synthesis of PPP was significantly enhanced in bmimPF6. Additionally, the results from doping studies of PPP films indicate improved electroactivity in bmimPF6 during oxidation (p‐doping) and in bmiTf2N in the case of reduction (n‐doping). These findings were supported by in situ infrared spectroscopy studies. Conducting poly(benzimidazobenzophenanthroline) (BBL) is a material which can provide relatively high field‐effect mobility of charge carriers in OFET devices. The main disadvantage of this n‐type semiconductor is its limited processability. Therefore in this work BBL was functionalized with poly(ethylene oxide) PEO, varying the length of side chains enabling water dispersions of the studied polymer. It was found that functionalization did not distract the electrochemical activity of the BBL backbone while the processability was improved significantly in comparison to conventional BBL. Another objective was to study highly processable poly(3,4‐ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) water‐based inks for controlled patterning scaled‐down to nearly a nanodomain with the intention to fabricate various chemical sensors. Developed PEDOT:PSS inks greatly improved printing of nanoarrays and with further modification with quaternary ammonium cations enabled fabrication of PEDOT:PSS‐based chemical sensors for lead (II) ions with enhanced adhesion and stability in aqueous environments. This opens new possibilities for development of PEDOT:PSS films that can be used in bio‐related applications. Polycyclic aromatic hydrocarbons (PAHs) are a broad group of π‐conjugated materials consisting of aromatic rings in the range from naphthalene to even hundred rings in one molecule. The research on this type of materials is intriguing, due to their interesting optical properties and resemblance of graphene. The objective was to use electrochemical synthesis to yield relatively large PAHs and fabricate electroactive films that could be used as template material in chemical sensors. Spectroscopic, electrochemical and electrical investigations evidence formation of highly stable films with fast redox response, consisting of molecules with 40 to 60 carbon atoms. Additionally, this approach in synthesis, starting from relatively small PAH molecules was successfully used in chemical sensor for lead (II).

Flexible Sensor for Wearable Vital Sign Monitoring System

In modern society, the body health is a very important issue to everyone. With the development of the science and technology, the new and developed body health monitoring device and technology will play the key role in the daily medical activities. This paper focus on making progress in the design of the wearable vital sign system. A vital sign monitoring system has been proposed and designed. The whole detection system is composed of signal collecting subsystem, signal processing subsystem, short-range wireless communication subsystem and user interface subsystem. The signal collecting subsystem is composed of light source and photo diode, after emiting light of two different wavelength, the photo diode collects the light signal reflected by human body tissue. The signal processing subsystem is based on the analog front end AFE4490 and peripheral circuits, the collected analog signal would be filtered and converted into digital signal in this stage. After a series of processing, the signal would be transmitted to the short-range wireless communication subsystem through SPI, this subsystem is mainly based on Bluetooth 4.0 protocol and ultra-low power System on Chip(SoC) nRF51822. Finally, the signal would be transmitted to the user end. After proposing and building the system, this paper focus on the research of the key component in the system, that is, the photo detector. Based on the study of the perovskite materials, a low temperature processed photo detector has been proposed, designed and researched. The device is made up of light absorbing layer, electron transporting and hole blocking layer, hole transporting and electron blocking layer, conductive substrate layer and metal electrode layer. The light absorbing layer is the important part of whole device, and it is fabricated by perovskite materials. After accepting the light, the electron-hole pair would be produced in this layer, and due to the energy level difference, the electron and hole produced would be transmitted to metal electrode and conductive substrate electrode through electron transporting layer and hole transporting layer respectively. In this way the response current would be produced. Based on this structure, the specific fabrication procedure including substrate cleaning; PEDOT:PSS layer preparation; pervoskite layer preparation; PCBM layer preparation; C60, BCP, and Ag electrode layer preparation. After the device fabrication, a series of morphological characterization and performance testing has been done. The testing procedure including film-forming quality inspection, response current and light wavelength analysis, linearity and response time and other optical and electrical properties testing. The testing result shows that the membrane has been fabricated uniformly; the device can produce obvious response current to the incident light with the wavelength from 350nm to 800nm, and the response current could be changed along with the light wavelength. When the light wavelength keeps constant, there exists a good linear relationship between the intensity of the response current and the power of the incident light, based on which the device could be used as the photo detector to collect the light information. During the changing period of the light signal, the response time of the device is several microseconds, which is acceptable working as a photo detector in our system. The testing results show that the device has good electronic and optical properties, and the fabrication procedure is also repeatable, the properties of the devices has good uniformity, which illustrates the fabrication method and procedure could be used to build the photo detector in our wearable system. Based on a series of testing results, the paper has drawn the conclusion that the photo detector fabricated could be integrated on the flexible substrate and is also suitable for the monitoring system proposed, thus made some progress on the research of the wearable monitoring system and device. Finally, some future prospect in system design aspect and device design and fabrication aspect are proposed.

Suomen maan pedot maalikuwilla selitetyt - [Kuvaliite]

Turku : J.W. Lillja & Co. 1854

"Askeleen päässä taidosta" - Kolmen askeleen menetelmän soveltuvuuden testaaminen oppimistehtävän avulla motoristen taitojen opetukseen 4. luokan käsityössä

Tutkimuksen tarkoituksena on selvittää taitojen opettamisen kolmen askeleen menetelmän soveltuvuutta motoristen taitojen opetukseen käsityön 4. luokalla. Menetelmän soveltuvuuden testaamiseksi on suunniteltu ja valmistettu oppimistehtävä. Oppimistehtävä on laadittu taitojen opettamisen yleismenetelmän, kolmen askeleen menetelmän pohjalta. Oppimistehtävän laadinnassa on käytetty tukena myös suljetun oppimistehtävän teoreettista perustaa, sekä ositetun ja taitolajipainotteisen käsityön piirteitä. Oppimistehtävä toteutettiin satakuntalaisessa koulussa ja toteutuksen suoritti koulun oma käsityönopettaja. Oppimistehtävän aikana tapahtuvasta toiminnasta, opetuksesta ja oppimisessa on pyritty saamaan tietoa kaikilta siihen osallistuneilta osapuolilta. Oppilaille on suoritettu oppimista mittaava alku ja loppu kysely. Opettajaa on haastateltu, jolloin on saatu oppimistehtävän toteuttajan kokemuksia tapahtuneesta. Lisäksi tutkijat ovat itse osallistuneet toiminnan havainnointiin, sekä videoineet opetusta ja oppilaiden toimintaa. Tutkimus on tutkimusotteeltaan laadullinen tapaustutkimus. Tutkimuksen tuote on motoristen taitojen opettamiseen laadittu oppimistehtävä. Tutkimuksen kulku ja toteutus on kuvattu yksityiskohtaisesti mittarien laadinnasta, aineiston keruun ja -tulosten analysoinnin kautta synteesiin ja tutkimusongelmiin vastaamiseen. Tutkimuksen tulokset osoittavat, että taitojen opettamisen kolmen askeleen menetelmä sisältää myös perusopetuksessa toteutettavan taitojen opetuksen kannalta keskeisimmät elementit. Menetelmä soveltuu etenkin vasta-alkaneille opettajille, mutta myös kokeneille opettajille. Taitojen oppimisen kannalta erityisen tärkeäksi seikaksi tällä ikäryhmällä osoittautui demonstrointi ja ohjaaminen. Lisäksi saimme yksityiskohtaista tietoa, jonka avulla menetelmästä voisi laatia tälle ikäryhmälle vieläkin sopivamman.

Solid-state reference and ion-selective electrodes : towards portable potentiometric sensing

Potentiometric sensors are very attractive tools for chemical analysis because of their simplicity, low power consumption and low cost. They are extensively used in clinical diagnostics and in environmental monitoring. Modern applications of both fields require improvements in the conventional construction and in the performance of the potentiometric sensors, as the trends are towards portable, on-site diagnostics and autonomous sensing in remote locations. The aim of this PhD work was to improve some of the sensor properties that currently hamper the implementation of the potentiometric sensors in modern applications. The first part of the work was concentrated on the development of a solid-state reference electrode (RE) compatible with already existing solid-contact ion-selective electrodes (ISE), both of which are needed for all-solid-state potentiometric sensing systems. A poly(vinyl chloride) membrane doped with a moderately lipophilic salt, tetrabutylammonium-tetrabutylborate (TBA-TBB), was found to show a satisfactory stability of potential in sample solutions with different concentrations. Its response time was nevertheless slow, as it required several minutes to reach the equilibrium. The TBA-TBB membrane RE worked well together with solid-state ISEs in several different situations and on different substrates enabling a miniature design. Solid contacts (SC) that mediate the ion-to-electron transduction are crucial components of well-functioning potentiometric sensors. This transduction process converting the ionic conduction of an ion-selective membrane to the electronic conduction in the circuit was studied with the help of electrochemical impedance spectroscopy (EIS). The solid contacts studied were (i) the conducting polymer (CP) poly(3,4-ethylienedioxythiophene) (PEDOT) and (ii) a carbon cloth having a high surface area. The PEDOT films were doped with a large immobile anion poly(styrene sulfonate) (PSS-) or with a small mobile anion Cl-. As could be expected, the studied PEDOT solid-contact mediated the ion-toelectron transduction more efficiently than the bare glassy carbon substrate, onto which they were electropolymerized, while the impedance of the PEDOT films depended on the mobility of the doping ion and on the ions in the electrolyte. The carbon cloth was found to be an even more effective ion-to-electron transducer than the PEDOT films and it also proved to work as a combined electrical conductor and solid contact when covered with an ion-selective membrane or with a TBA-TBB-based reference membrane. The last part of the work was focused on improving the reproducibility and the potential stability of the SC-ISEs, a problem that culminates to the stability of the standard potential E°. It was proven that the E° of a SC-ISE with a conducting polymer as a solid contact could be adjusted by reducing or oxidizing the CP solid contact by applying current pulses or a potential to it, as the redox state of the CP solid-contact influences the overall potential of the ISE. The slope and thus the analytical performance of the SC-ISEs were retained despite the adjustment of the E°. The shortcircuiting of the SC-ISE with a conventional large-capacitance RE was found to be a feasible instrument-free method to control the E°. With this method, the driving force for the oxidation/reduction of the CP was the potential difference between the RE and the SC-ISE, and the position of the adjusted potential could be controlled by choosing a suitable concentration for the short-circuiting electrolyte. The piece-to-piece reproducibility of the adjusted potential was promising, and the day-today reproducibility for a specific sensor was excellent. The instrumentfree approach to control the E° is very attractive considering practical applications.

Vortex-putken ominaisuudetkuivaussovellutuksessa

Työssä tarkastellaan vortex-putken soveltuvuutta kostean ilman kuivatukseen ja vapautuvan latenttilämmön hyödyntämiseen. Soveltuvuutta arvioidaan veden ja ilman massataseita hyväksi käyttäen ja stationaarisen systeemin energiataseen avulla. Työn mittauksia varten rakennettiin koelaitteisto, jonka avulla mitattiin miten lämpötilaerot kuumassa ja kylmässä päässä käyttäytyivät mitattaessa kuivalla ilmalla ja ilmalla, jota oli kostutettu. Mitattavia suureita olivat syöttöpaine- ja lämpötila, lämpötilat kuumassa ja kylmässä päässä, kuuman pään paine ja tilavuusvirta tai virtausnopeus ja kuuman pään suhteellinen kosteus. Mittaustulosten avulla laskettiin lämpötilan muutokset kummassakin päässä ja verrattiin kuivan ja kostean ilman mittauksien tuloksia toisiinsa. Lisäksi laskettiin tiivistyneen veden määrä ja veden ja ilman massavirrat molemmissa päissä. Näin voitiin laskea tiivistymisessä vapautuva energia ja tarkastella mihin se siirtyy. Tulosten perusteella vortex-putki soveltuu hyvin huonosti ilman kuivatukseen. Tiivistyneen veden määrä ja sitä kautta tiivistymisessä vapautunut energia, olivat pieniä. Suurin osa kosteudesta meni kuuman pään virtauksen mukana. Tiivistymisessä vapautunut energia siirtyi kylmään päähän.

Hiomon AI-järjestelmän toimivuuden arviointi

Työn tavoitteena oli uudentyyppisen hiontaprosessin ohjausjärjestelmän kehittäminen ja testaaminen UPM-Kymmene Kaukaan hiomossa. Uuden ohjausjärjestelmän perusajatuksena oli pitää yksittäistä hiomakiveä jatkuvasti optimaalisessa toimintapisteessä, ja hiomon kaikilla koneilla pyrittiin samaan kivenalusmassan laatuun. Uutta ohjaustapaa kutsuttiin Optimum operating point -strategiaksi (OOPS). Hiomakiven pitäminen optimaalisessa toimintapisteessä tapahtui pääosin vesiteräyskäsittelyllä, jonka intensiteettiä ohjasi asiantuntijajärjestelmä (AI-järjestelmä). Lisäksi testattiin ohjelmoidun anturan nopeussäädön vaikutusta hiomakoneen resurssien käyttöön. AI-järjestelmä päätteli vesiteräyskäsittelyn tarpeellisuuden CSF-mallin ja hiomakoneen resurssien perusteella. Seurannasta saatujen tulosten perusteella AI-järjestelmän käyttöönotto vesiteräyskäsittelyssä paransi tuotannon ja massan laadun tasaisuutta. Hiomakoneiden resurssien havaittiin pienenevän puunsyöttölinjan mukaisesti. Paksummat pöllit kerääntyvät linjan päähän, jolloin varsinkin hydrauliikkapaineiden tarve lisääntyy linjan päässä olevilla hiomakoneilla. Hiomakoneen resurssit saatiin paremmin käyttöön kuormittamalla konetta ohjelmoidulla anturan nopeussäädöllä (ONS) kuin vakioidulla anturan nopeussäädöllä (VNS). Kuitenkin hydraulipaineresurssien puutteellisuus rajoitti koeajon aikana ONS:n toimintaa. Resursseja ei optimoitu koeajon aikana, koska kiven pinnan haluttiin pysyvän mahdollisimman stabiilina. Kivelle ei suoritettu mekaanista käsittelyä, vaikka kivenpinnan massan kuljetuskapasiteetin havaittiin olevan huono. AI-järjestelmä otettiin ohjaamaan vesiteräyskäsittelyä vasta ONS - VNS -koeajon jälkeen. Mekaanisen rullateräyksen jälkeen massan ominaisuudet muuttuivat, koska kiven pinnan terävät särmät katkoivat kuituja alentaen massan sitoutumiskykyä. Heti rullakäsittelyn jälkeen mitattu CSF saattoi jopa alentua huomattavasti, mutta AI-järjestelmän laskema CSF nousi selvästi indikoiden energian ominaiskulutuksen (EOK) laskua. Muutaman päivän hionnan jälkeen mitattu ja laskettu CSF saavuttivat saman tason.