Energy Efficiency in Electrical Drive Systems: Technical potentials, barriers and policy approaches for small and medium industries in Ghana

Today industries and commerce in Ghana are facing enormous energy challenge. The pressure is on for industries to reduce energy consumption, lower carbon emissions and provide se-cured power supply. Industrial electric motor energy efficiency improvement is one of the most important tools to reduce global warming threat and reduce electricity bills. In order to develop a strategic industrial energy efficiency policy, it is therefore necessary to study the barriers that inhibit the implementation of cost – effective energy efficiency measures and the driving forces that promote the implementation. The aim of this thesis is to analyse the energy consumption pattern of electric motors, study factors that promote or inhibit energy efficiency improvements in EMDS and provide cost – effective solutions that improve energy efficiency to bridge the existing energy efficiency gap in the surveyed industries. The results from this thesis has revealed that, the existence of low energy efficiency in motor-driven systems in the surveyed industries were due to poor maintenance practices, absence of standards, power quality issues, lack of access to capital and limited awareness to the im-portance of energy efficiency improvements in EMDS. However, based on the results pre-sented in this thesis, a policy approach towards industrial SMEs should primarily include dis-counted or free energy audit in providing the industries with the necessary information on potential energy efficiency measures, practice best motor management programmes and estab-lish a minimum energy performance standard (MEPS) for motors imported into the country. The thesis has also shown that education and capacity development programmes, financial incentives and system optimization are effective means to promote energy efficiency in elec-tric motor – driven systems in industrial SMEs in Ghana

Two Cultures of Arts Education, Finland and Canada? An integrated View

Taidekasvatuksen kaksi kulttuuria, Suomi ja Kanada? Integroitu näkemys Tutkimuksessa kuvataan kanadalaisen Learning Through The Arts –pedagogiikan mukainen suomalainen kokeiluhanke, jonka aikana taiteilija–opettaja-parit opettivat yhdessä eri oppiaineita koululuokille: esim. matematiikkaa tanssien, biologiaa maalaten tai yhdistäen eri taiteenlajeja projektimuotoiseen oppimiseen. Hanketta arvioitaessa nousee esille, ei niinkään yksittäisten taiteilijoiden ja opettajien toiminta, vaan pikemminkin Kanadan ja Suomen rakenteelliset sekä kulttuuriset eroavuudet. Tutkimus sivuaa myös Suomessa käytävää keskustelua taiteen hyödyllisyydestä ja pohtii samalla taito- ja taideaineiden asemaa koulussa. Työn teoreettisessa osassa integroidaan opetussuunnitelmateoriaa, kasvatuksen historiaa ja filosofiaa, tähdentäen taidekasvatuksen merkitystä osana koko ihmisen kasvatusta. Opetussuunnitelmateorian osalta tarkastellaan romanttista ja klassista opetussuunnitelmaa, jotka eroavat toisistaan menetelmiensä, sisältöjensä, tavoitteidensa sekä arvioinnin osalta. Ns. kovat ja pehmeät aineet tai matemaattis-luonnontieteelliset aineet vastakohtanaan humanismi, voidaan ymmärtää sekä historiallisia että epistemologisia taustojaan vasten. Pepperin maailmanhypoteesien mukaisesti on kasvatuksen ongelmien ratkaisemiseksi hahmotettavissa neljä selvästi toisistaan eroavaa lähestymistapaa: formismi; organisismi; mekanisismi; sekä kontekstualismi. Kantin filosofiaan viitaten tutkimus puolustaa käsitystä taiteesta rationaalisena ja propositionaalisena kokonaisuutena, joka ei ole vain kommunikaation väline, vaan yksi todellisuuden kohtaamisen lajeista, tiedon ja etiikan rinnalla. Näin ajateltuna taito- ja taidekasvatuksen tulisi olla luonteeltaan aina myös kulttuurikasvatusta. Tutkimuksen tulosten perusteella voidaan väittää, että moniammatillinen yhteistyö monipuolistaa koulun opetusta. Mikäli huolehditaan siitä, että taiteilijat saavat riittävästi koulutusta opettamiseen liittyvissä asioissa, on mahdollista käyttää taiteilijoita opettajien rinnalla koulutyössä.

Engendering Group Support Based Foresight for Capital Intensive Manufacturing Industries - Case Paper and Steel Industry Scenarios by 2018

In recent times of global turmoil, the need for uncertainty management has become ever momentous. The need for enhanced foresight especially concerns capital-intensive industries, which need to commit their resources and assets with long-term planning horizons. Scenario planning has been acknowledged to have many virtues - and limitations - concerning the mapping of the future and illustrating the alternative development paths. The present study has been initiated to address both the need of improved foresight in two capital-intensive industries, i.e. the paper and steel industries and the imperfections in the current scenario practice. The research problem has been approached by engendering a problem-solving vehicle, which combines, e.g. elements of generic scenario process, face-to-face group support methods, deductive scenario reasoning and causal mapping into a fully integrated scenario process. The process, called the SAGES scenario framework, has been empirically tested by creating alternative futures for two capital-intensive industries, i.e. the paper and steel industries. Three scenarios for each industry have been engendered together with the identification of the key megatrends, the most important foreign investment determinants, key future drivers and leading indicators for the materialisation of the scenarios. The empirical results revealed a two-fold outlook for the paper industry, while the steel industry future was seen as much more positive. The research found support for utilising group support systems in scenario and strategic planning context with some limitations. Key perceived benefits include high time-efficiency, productivity and lower resource-intensiveness. Group support also seems to enhance participant satisfaction, encourage innovative thinking and provide the users with personalised qualitative scenarios.

“Valley co-creation” – exploring the emergence of a cultural product in an entrepreneur-driven value network: Case study: Black Weekend festival

The interconnected domains are attracting interest from industries and academia, although this phenomenon, called ‘convergence’ is not new. Organizational research has indeed focused on uncovering co-creation for manufacturing and the industrial organization, with limited implications to entrepreneurship. Although convergence has been characterized as a process connecting seemingly disparate disciplines, it is argued that these studies tend to leave the creative industries unnoticed. With the art market boom and new forms of collaboration riding past the institution-focused arts marketing literature, this thesis takes a leap to uncover the processes of entrepreneurship in the emergence of a cultural product. As a symbolic work of synergism itself, the thesis combines organizational theory with literature in natural sciences and arts. Assuming nonlinearity, a framework is created for analysing aesthetic experience in an empirical event where network actors are connected to multiple contexts. As the focal case in study, the empirical analysis performed for a music festival organized in a skiing resort in the French Alps in March. The researcher attends the festival and models its cocreation process by enquiring from an artist, festival organisers, and a festival visitor. The findings contribute to fields of entrepreneurship, aesthetics and marketing mainly. It is found that the network actors engage in intimate and creative interaction where activity patterns are interrupted and cultural elements combined. This process is considered to both create and destruct value, through identity building, legitimisation, learning, and access to larger audiences, and it is considered particularly useful for domains where resources are too restrained for conventional marketing practices. This thesis uncovered the role of artists and informants and posits that particularly through experience design, this type of skilled individual be regarded more often as a research informant. Future research is encouraged to engage in convergence by experimenting with different fields and research designs, and it is suggested that future studies could arrive at different descriptive results.

Social networks and networking facilitating internationalization: Experiences of two Finnish fashion companies

Background: Fashion is a dynamic and creative industry where larger retailers are enjoying international success. Small businesses however are struggling in the face of international expansion, as they lack the necessary resources and managerial know-how. The Finnish fashion industry has neither been able to develop the industry environment to support small and micro firms nor has Finland relevant finance or public domains, such as, seen in other Nordic countries. Networking has been recognized to facilitate organizational growth and international expansion in industries such as manufacturing and high technology. It has enabled smaller companies to gain resources, knowledge and experiences otherwise unattainable. Objective: The purpose of this study was to explore how networking has been utilized in the Finnish fashion industry. Particularly social relationships and networks are examined, as they emphasize the importance of individuals. Exploration on the past actions should also provide insight how networks and networking could be utilized and developed in the future. Main findings: It was discovered that the Finnish fashion industry (social) network is rather dense. This was mainly due to the small size of the Finnish market. In the early years of the establishment of the company, close contacts seemed to be utilized. As a company expands and extends its business, the relationships tended to move towards more utilitarian in nature. However, in some cases, the long term relationships had also affectionate features, such as trust and commitment. International networking was found to have positive impact on business opportunities. Participation to events, such as trade shows, was perceived as one of the best ways to meet new international contacts and to develop ones network. Active networking in the Finnish market, however, created both domestic and international opportunities. Furthermore, cooperation and open communication were discovered to facilitate innovation and projects. The public sector seemed to lack the interest in supporting the fashion industry according to the interviewees. The major issues for the fashion industry still concerned, among others, funding, administrative guidance and public support for developing the industry as a whole.

Visual Arts Data Skills for Researchers (VADS4R)

Workshop at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Organizational creativity – Hegemonic and alternative discourses

SUMMARY Organizational creativity – hegemonic and alternative discourses Over the course of recent developments in the societal and business environment, the concept of creativity has been brought into new arenas. The rise of ‘creative industries’ and the idea of creativity as a form of capital have attracted the interests of business and management professionals – as well as academics. As the notion of creativity has been adopted in the organization studies literature, the concept of organizational creativity has been introduced to refer to creativity that takes place in an organizational context. This doctoral thesis focuses on organizational creativity, and its purpose is to explore and problematize the hegemonic organizational creativity discourse and to provide alternative viewpoints for theorizing about creativity in organizations. Taking a discourse theory approach, this thesis, first, provides an outline of the currently predominant, i.e. hegemonic, discourse on organizational creativity, which is explored regarding themes, perspectives, methods and paradigms. Second, this thesis consists of five studies that act as illustrations of certain alternative viewpoints. Through these exemplary studies, this thesis sheds light on the limitations and taken-for-granted aspects of the hegemonic discourse and discusses what these alternative viewpoints could offer for the understanding of and theorizing for organizational creativity. This study leans on an assumption that the development of organizational creativity knowledge and the related discourse is not inevitable or progressive but rather contingent. The organizational creativity discourse has developed in a certain direction, meaning that some themes, perspectives, and methods, as well as assumptions, values, and objectives, have gained a hegemonic position over others, and are therefore often taken for granted and considered valid and relevant. The hegemonization of certain aspects, however, contributes to the marginalization of others. The thesis concludes that the hegemonic discourse on organizational creativity is based on an extensive coverage of certain themes and perspectives, such as those focusing on individual cognitive processes, motivation, or organizational climate and their relation to creativity, to name a few. The limited focus on some themes and the confinement to certain prevalent perspectives, however, results in the marginalization of other themes and perspectives. The negative, often unintended, consequences, implications, and side effects of creativity, the factors that might hinder or prevent creativity, and a deeper inquiry into the ontology and epistemology of creativity have attracted relatively marginal interest. The material embeddedness of organizational creativity, in other words, the physical organizational environment as well as the human body and its non-cognitive resources, has largely been overlooked in the hegemonic discourse, although thereare studies in this area that give reason to believe that they might prove relevant for the understanding of creativity. The hegemonic discourse is based on an individual-centered understanding of creativity which overattributes creativity to an individual and his/her cognitive capabilities, while simultaneously neglecting how, for instance, the physical environment, artifacts, social dynamics and interactions condition organizational creativity. Due to historical reasons, quantitative as well as qualitative yet functionally- oriented studies have predominated the organizational creativity discourse, although studies falling into the interpretationist paradigm have gradually become more popular. The two radical paradigms, as well as methodological and analytical approaches typical of radical research, can be considered to hold a marginal position in the field of organizational creativity. The hegemonic organizational creativity discourse has provided extensive findings related to many aspects of organizational creativity, although the con- ceptualizations and understandings of organizational creativity in the hegemonic discourse are also in many respects limited and one-sided. The hegemonic discourse is based on an assumption that creativity is desirable, good, necessary, or even obligatory, and should be encouraged and nourished. The conceptualiza- tions of creativity favor the kind of creativity which is useful, valuable and can be harnessed for productivity. The current conceptualization is limited to the type of creativity that is acceptable and fits the managerial ideology, and washes out any risky, seemingly useless, or negative aspects of creativity. It also limits the possible meanings and representations that ‘creativity’ has in the respective discourse, excluding many meanings of creativity encountered in other discourses. The excessive focus on creativity that is good, positive, productive and fits the managerial agenda while ignoring other forms and aspects of creativity, however, contributes to the dilution of the notion. Practices aimed at encouraging the kind of creativity may actually entail a risk of fostering moderate alterations rather than more radical novelty, as well as management and organizational practices which limit creative endeavors, rather than increase their likelihood. The thesis concludes that although not often given the space and attention they deserve, there are alternative conceptualizations and understandings of organizational creativity which embrace a broader notion of creativity. The inability to accommodate the ‘other’ understandings and viewpoints within the organizational creativity discourse runs a risk of misrepresenting the complex and many-sided phenomenon of creativity in organizational context. Keywords: Organizational creativity, creativity, organization studies, discourse theory, hegemony

Technology selection and group decision support systems: Case studies on supporting strategic technology selection processes

The objective of the dissertation is to increase understanding and knowledge in the field where group decision support system (GDSS) and technology selection research overlap in the strategic sense. The purpose is to develop pragmatic, unique and competent management practices and processes for strategic technology assessment and selection from the whole company's point of view. The combination of the GDSS and technology selection is approached from the points of view of the core competence concept, the lead user -method, and different technology types. In this research the aim is to find out how the GDSS contributes to the technology selection process, what aspects should be considered when selecting technologies to be developed or acquired, and what advantages and restrictions the GDSS has in the selection processes. These research objectives are discussed on the basis of experiences and findings in real life selection meetings. The research has been mainly carried outwith constructive, case study research methods. The study contributes novel ideas to the present knowledge and prior literature on the GDSS and technology selection arena. Academic and pragmatic research has been conducted in four areas: 1) the potential benefits of the group support system with the lead user -method,where the need assessment process is positioned as information gathering for the selection of wireless technology development projects; 2) integrated technology selection and core competencies management processes both in theory and in practice; 3) potential benefits of the group decision support system in the technology selection processes of different technology types; and 4) linkages between technology selection and R&D project selection in innovative product development networks. New type of knowledge and understanding has been created on the practical utilization of the GDSS in technology selection decisions. The study demonstrates that technology selection requires close cooperation between differentdepartments, functions, and strategic business units in order to gather the best knowledge for the decision making. The GDSS is proved to be an effective way to promote communication and co-operation between the selectors. The constructs developed in this study have been tested in many industry fields, for example in information and communication, forest, telecommunication, metal, software, and miscellaneous industries, as well as in non-profit organizations. The pragmatic results in these organizations are some of the most relevant proofs that confirm the scientific contribution of the study, according to the principles of the constructive research approach.

Micronization of Pharmaceuticals and Food Ingredients using Supercritical Fluid Techniques

Micronization techniques based on supercritical fluids (SCFs) are promising for the production of particles with controlled size and distribution. The interest of the pharmaceutical field in the development of SCF techniques is increasing due to the need for clean processes, reduced consumption of energy, and to their several possible applications. The food field is still far from the application of SCF micronization techniques, but there is increasing interest mainly for the processing of products with high added value. The aim of this study is to use SCF micronization techniques for the production of particles of pharmaceuticals and food ingredients with controlled particle size and morphology, and to look at their production on semi-industrial scale. The results obtained are also used to understand the processes from the perspective of broader application within the pharmaceutical and food industries. Certain pharmaceuticals, a biopolymer and a food ingredient have been tested using supercritical antisolvent micronization (SAS) or supercritical assisted atomization (SAA) techniques. The reproducibility of the SAS technique has been studied using physically different apparatuses and on both laboratory and semi-industrial scale. Moreover, a comparison between semi-continuous and batch mode has been performed. The behaviour of the system during the SAS process has been observed using a windowed precipitation vessel. The micronized powders have been characterized by particle size and distribution, morphology and crystallinity. Several analyses have been performed to verify if the SCF process modified the structure of the compound or caused degradation or contamination of the product. The different powder morphologies obtained have been linked to the position of the process operating point with respect to the vapour-liquid equilibrium (VLE) of the systems studied, that is, mainly to the position of the mixture critical point (MCP) of the mixture. Spherical micro, submicro- and nanoparticles, expanded microparticles (balloons) and crystals were obtained by SAS. The obtained particles were amorphous or with different degrees of crystallinity and, in some cases, had different pseudo-polymorphic or polymorphic forms. A compound that could not be processed using SAS was micronized by SAA, and amorphous particles were obtained, stable in vials at room temperature. The SCF micronization techniques studied proved to be effective and versatile for the production of particles for several uses. Furthermore, the findings of this study and the acquired knowledge of the proposed processes can allow a more conscious application of SCF techniques to obtain products with the desired characteristics and enable the use of their principles for broader applications.

Evolution of Ba and Role of Absorptive Capacity in Collaboration between MNCs and Chinese Universities in China

During the recent years, collaboration with Chinese universities has aroused growing interest among multinational companies (MNCs). Cross-cultural university-industry (U-I) collaboration creates various challenges in collaborative knowledge creation and innovation due to the differences e.g. between university and company motivation, objectives and activities. Also different values, norms, and means of actions result often in collisions and misunderstandings. This thesis examines the establishment of the relationships and the evolution of the collaboration between MNCs and Chinese universities. Empirical findings underscore that the partners in collaboration are required to possess research interest as well as capability to acquire, assimilate and exploit new external knowledge. Time and communication have a critical role in the evolution of the collaboration. In China the personal relationships, guanxi, play an important role. Collaborative knowledge creation requires a platform, Ba, which enables the creation of common understanding, commitment, trust and mutual respect. Empirical data has been collected through interviewing company experts and academe of Chinese universities from ICT and forest industries as well as attending panel discussions and meetings with the experts from the field of study.

Treatment of oily wastewater by ultrafiltration: The effect of different operating and solution conditions

In many industries, such as petroleum production, and the petrochemical, metal, food and cosmetics industries, wastewaters containing an emulsion of oil in water are often produced. The emulsions consist of water (up to 90%), oils (mineral, animal, vegetable and synthetic), surfactants and other contaminates. In view of its toxic nature and its deleterious effects on the surrounding environment (soil, water) such wastewater needs to be treated before release into natural water ways. Membrane-based processes have successfully been applied in industrial applications and are considered as possible candidates for the treatment of oily wastewaters. Easy operation, lower cost, and in some cases, the ability to reduce contaminants below existing pollution limits are the main advantages of these systems. The main drawback of membranes is flux decline due tofouling and concentration polarisation. The complexity of oil-containing systems demands complementary studies on issues related to the mitigation of fouling and concentration polarisation in membranebased ultrafiltration. In this thesis the effect of different operating conditions (factors) on ultrafiltration of oily water is studied. Important factors are normally correlated and, therefore, their effect should be studied simultaneously. This work uses a novel approach to study different operating conditions, like pressure, flow velocity, and temperature, and solution properties, like oil concentration (cutting oil, diesel, kerosene), pH, and salt concentration (CaCl2 and NaCl)) in the ultrafiltration of oily water, simultaneously and in a systematic way using an experimental design approach. A hypothesis is developed to describe the interaction between the oil drops, salt and the membrane surface. The optimum conditions for ultrafiltration and the contribution of each factor in the ultrafiltration of oily water are evaluated. It is found that the effect on permeate flux of the various factors studied strongly depended on the type of oil, the type of membrane and the amount of salts. The thesis demonstrates that a system containing oil is very complex, and that fouling and flux decline can be observed even at very low pressures. This means that only the weak form of the critical flux exists for such systems. The cleaning of the fouled membranes and the influence of different parameters (flow velocity, temperature, time, pressure, and chemical concentration (SDS, NaOH)) were evaluated in this study. It was observed that fouling, and consequently cleaning, behaved differently for the studied membranes. Of the membranes studied, the membrane with the lowest propensity for fouling and the most easily cleaned was the regenerated cellulose membrane (C100H). In order to get more information about the interaction between the membrane and the components of the emulsion, a streaming potential study was performed on the membrane. The experiments were carried out at different pH and oil concentration. It was seen that oily water changed the surface charge of the membrane significantly. The surface charge and the streaming potential during different stages of filtration were measured and analysed being a new method for fouling of oil in this thesis. The surface charge varied in different stages of filtration. It was found that the surface charge of a cleaned membrane was not the same as initially; however, the permeability was equal to that of a virgin membrane. The effect of filtration mode was studied by performing the filtration in both cross-flow and deadend mode. The effect of salt on performance was considered in both studies. It was found that salt decreased the permeate flux even at low concentration. To test the effect of hydrophilicity change, the commercial membranes used in this thesis were modified by grafting (PNIPAAm) on their surfaces. A new technique (corona treatment) was used for this modification. The effect of modification on permeate flux and retention was evaluated. The modified membranes changed their pore size around 33oC resulting in different retention and permeability. The obtained results in this thesis can be applied to optimise the operation of a membrane plant under normal or shock conditions or to modify the process such that it becomes more efficient or effective.

On Value Creation at an Industrial Intersection – Bioenergy in the Forest and Energy Sectors

The traditional forest industry is a good example of the changing nature of the competitive environment in many industries. Faced with drastic challenges forestindustry companies are forced to search for new value-creating strategies in order to create competitive advantage. The emerging bioenergy business is now offering promising avenues for value creation for both the forest and energy sectors because of their complementary resources and knowledge with respect to bioenergy production from forest-based biomass. The key objective of this dissertation is to examine the sources of sustainable competitive advantage and the value-creation opportunities that are emerging at the intersection between the forest and energy industries. The research topic is considered from different perspectives in order to provide a comprehensive view of the phenomenon. The study discusses the business opportunities that are related to producing bioenergy from forest-based biomass, and sheds light on the greatest challenges and threats influencing the success of collaboration between the forest and energy sectors. In addition, it identifies existing and potential bioenergy actors, and considers the resources and capabilities needed in order to prosper in the bioenergy field. The value-creation perspective is founded on strategic management accounting, the theoretical frameworks are adopted from the field of strategic management, and the future aspect is taken into account through the application of futures studies research methodology. This thesis consists of two parts. The first part provides a synthesis of the overall dissertation, and the second part comprises four complementary research papers. There search setting is explorative in nature, and both qualitative and quantitative research methods are used. As a result, the thesis lays the foundation for non-technological studies on bioenergy. It gives an example of how to study new value-creation opportunities at an industrial intersection, and discusses the main determinants affecting the value-creation process. In order to accomplish these objectives the phenomenon of value creation at the intersection between the forest and energy industries is theorized and connected with the dynamic resource-based view of the firm.

CFD Simulation of Two-phase and Three-phase Flows in Internal-loop Airlift

Airlift reactors are pneumatically agitated reactors that have been widely used in chemical, petrochemical, and bioprocess industries, such as fermentation and wastewater treatment. Computational Fluid Dynamics (CFD) has become more popular approach for design, scale-up and performance evaluation of such reactors. In the present work numerical simulations for internal-loop airlift reactors were performed using the transient Eulerian model with CFD package, ANSYS Fluent 12.1. The turbulence in the liquid phase is described using κ- ε the model. Global hydrodynamic parameters like gas holdup, gas velocity and liquid velocity have been investigated for a range of superficial gas velocities, both with 2D and 3D simulations. Moreover, the study of geometry and scale influence on the reactor have been considered. The results suggest that both, geometry and scale have significant effects on the hydrodynamic parameters, which may have substantial effects on the reactor performance. Grid refinement and time-step size effect have been discussed. Numerical calculations with gas-liquid-solid three-phase flow system have been carried out to investigate the effect of solid loading, solid particle size and solid density on the hydrodynamic characteristics of internal loop airlift reactor with different superficial gas velocities. It was observed that averaged gas holdup is significantly decreased with increasing slurry concentration. Simulations show that the riser gas holdup decreases with increase in solid particle diameter. In addition, it was found that the averaged solid holdup increases in the riser section with the increase of solid density. These produced results reveal that CFD have excellent potential to simulate two-phase and three-phase flow system.