Effect of feeding level during autumn and winter on breeding weight and result in single and pair-housed minks

Selostus: Syys- ja talviruokinnan vaikutus yksin ja pareittain kasvatettujen minkkien lisääntymistulokseen

Effects of restricted methionine and energy intake on egg weight and shell quality

Selostus: Metioniinin ja energian saannin rajoittamisen vaikutukset kananmunan painoon ja laatuun

Predicting body weight from body measurements of pre-pubertal Ayshire heifers

Selostus: Hiehojen elopainon määrittäminen mittauksin alkukasvatusvaiheessa

Analysis of Active Magnet Bearing Control Software

Problems of the designing active magnet bearingcontrol are developed. The estimation controller are designed and applied to a rigid rotor. The mathematical model of the active magnet bearing controller is developed. This mathematical model is realized on a DSP. The results of this realization are analyzed. The conclusions about the digital signal processing are made.

Teollisuustuotteen markkinointisuunnitelma. Case: Omni Weight Control Oy

Tutkielman tavoitteena on markkinointisuunnitelman laatiminen teollisuustuotteelle, jota business-to-business -markkinoilla toimiva case-yritys valmistaa. Aihetta tarkastellaan ensin teoreettisesti lähdekirjallisuuden avulla ja sen jälkeen empiirisesti case-yrityksen näkökulmasta. Tutkimusmenetelmänä on normatiivinen eli soveltava case-tutkimus. Tutkimusote on kvalitatiivinen. Markkinointisuunnitelma laaditaan analysoimalla yrityksen ulkoista ja sisäistä toimintaympäristöä, asettamalla markkinoinnin tavoitteet, määrittelemällä markkinointistrategiat ja yksilöimällä toimintaohjeet. Markkinointisuunnitelman laatiminen kannattaa, sillä se tehostaa yrityksen ulkoista markkinointia. Tutkielman tuloksena voidaan todeta, että case-yrityksellä on hyvät mahdollisuudet menestyä hihnavaakamarkkinoilla uudella tuotteellaan, kunhan se saa nimeään tunnetuksi.

Non-Linear Journal Bearing Model for Analysis of Superharmonic Vibrations of Rotor Systems

A rotating machine usually consists of a rotor and bearings that supports it. The nonidealities in these components may excite vibration of the rotating system. The uncontrolled vibrations may lead to excessive wearing of the components of the rotating machine or reduce the process quality. Vibrations may be harmful even when amplitudes are seemingly low, as is usually the case in superharmonic vibration that takes place below the first critical speed of the rotating machine. Superharmonic vibration is excited when the rotational velocity of the machine is a fraction of the natural frequency of the system. In such a situation, a part of the machine’s rotational energy is transformed into vibration energy. The amount of vibration energy should be minimised in the design of rotating machines. The superharmonic vibration phenomena can be studied by analysing the coupled rotor-bearing system employing a multibody simulation approach. This research is focused on the modelling of hydrodynamic journal bearings and rotorbearing systems supported by journal bearings. In particular, the non-idealities affecting the rotor-bearing system and their effect on the superharmonic vibration of the rotating system are analysed. A comparison of computationally efficient journal bearing models is carried out in order to validate one model for further development. The selected bearing model is improved in order to take the waviness of the shaft journal into account. The improved model is implemented and analyzed in a multibody simulation code. A rotor-bearing system that consists of a flexible tube roll, two journal bearings and a supporting structure is analysed employing the multibody simulation technique. The modelled non-idealities are the shell thickness variation in the tube roll and the waviness of the shaft journal in the bearing assembly. Both modelled non-idealities may cause subharmonic resonance in the system. In multibody simulation, the coupled effect of the non-idealities can be captured in the analysis. Additionally one non-ideality is presented that does not excite the vibrations itself but affects the response of the rotorbearing system, namely the waviness of the bearing bushing which is the non-rotating part of the bearing system. The modelled system is verified with measurements performed on a test rig. In the measurements the waviness of bearing bushing was not measured and therefore it’s affect on the response was not verified. In conclusion, the selected modelling approach is an appropriate method when analysing the response of the rotor-bearing system. When comparing the simulated results to the measured ones, the overall agreement between the results is concluded to be good.

Radio Frequency Measurement Method for Detecting Bearing Currents in Induction Motors

Induction motors are widely used in industry, and they are generally considered very reliable. They often have a critical role in industrial processes, and their failure can lead to significant losses as a result of shutdown times. Typical failures of induction motors can be classified into stator, rotor, and bearing failures. One of the reasons for a bearing damage and eventually a bearing failure is bearing currents. Bearing currents in induction motors can be divided into two main categories; classical bearing currents and inverter-induced bearing currents. A bearing damage caused by bearing currents results, for instance, from electrical discharges that take place through the lubricant film between the raceways of the inner and the outer ring and the rolling elements of a bearing. This phenomenon can be considered similar to the one of electrical discharge machining, where material is removed by a series of rapidly recurring electrical arcing discharges between an electrode and a workpiece. This thesis concentrates on bearing currents with a special reference to bearing current detection in induction motors. A bearing current detection method based on radio frequency impulse reception and detection is studied. The thesis describes how a motor can work as a “spark gap” transmitter and discusses a discharge in a bearing as a source of radio frequency impulse. It is shown that a discharge, occurring due to bearing currents, can be detected at a distance of several meters from the motor. The issues of interference, detection, and location techniques are discussed. The applicability of the method is shown with a series of measurements with a specially constructed test motor and an unmodified frequency-converter-driven motor. The radio frequency method studied provides a nonintrusive method to detect harmful bearing currents in the drive system. If bearing current mitigation techniques are applied, their effectiveness can be immediately verified with the proposed method. The method also gives a tool to estimate the harmfulness of the bearing currents by making it possible to detect and locate individual discharges inside the bearings of electric motors.

Effects of Weight Loss on Adipose Tissue, Liver and Heart Metabolism in Humans

Obesity has become the leading cause of many chronic diseases, such as type 2 diabetes and cardiovascular diseases. The prevalence of obesity is high in developed countries and it is also a major cause of the use of health services. Ectopic fat accumulation in organs may lead to metabolic disturbances, such as insulin resistance.Weight loss with very-low-energy diet is known to be safe and efficient. Weight loss improves whole body insulin sensitivity, but its effects on tissue and organ level in vivo are not well known. The aims of the studies were to investigate possible changes of weight loss in glucose and fatty acid uptake and perfusion and fat distribution at tissue and organ level using positron emission tomography and magnetic resonance imaging and spectroscopy in 34 healthy obese subjects. The results showed that whole-body insulin sensitivity increased after weight loss with very-low-energy diet and this is associated with improved skeletal muscle insulin-stimulated glucose uptake, but not with adipose tissue, liver or heart glucose uptake. Liver insulin resistance decreased after weight loss. Liver and heart free fatty acid uptakes decreased concomitantly with liver and heart triglyceride content. Adipose tissue and myocardial perfusion decreased. In conclusion, enhanced skeletal muscle glucose uptake leads to increase in whole-body insulin sensitivity when glucose uptake is preserved in other organs studied. These findings suggest that lipid accumulation found in the liver and the heart in obese subjects without co-morbidies is in part reversible by reduced free fatty acid uptake after weight loss. Reduced lipid accumulation in organs may improve metabolic disturbances, e.g. decrease liver insulin resistance. Keywords: Obesity, weight loss, very-low-energy diet, adipose tissue metabolism, liver metabolism, heart metabolism, positron emission tomography

Improving Cross Direction Basis Weight Profile in a Fourdrinier Paper Machine

The purpose of this study was to improve PM7’s basis weight CD profile in Stora Enso’s Berghuizer mill and to search mechanical defects which affect to the formation of the basis weight CD profile. In the theoretical part PM7’s structure was presented and the formation of the basis weight and caliper CD profiles was examined as well as disturbances which are affecting to the formation. The function of the control system was scrutinised for the side of CD profiles as well as the formation of the measured CD profiles. Tuning of the control system was examined through the response model and filtering. Specification of the response model and filtering was explained and how to determine 2sigma statistical number. In the end of the theoretical part ATPA hardware and a new profile browser were introduced. In the experimental part focus was in the beginning to search and remove mechanical defects which are affecting to CD profiles. The next step was to verify the reliability of the online measurements, to study the stability of the basis weight CD profile and to find out so called fingerprint, a basis weight CD profile which is unique for each paper machine. New response model and filtering value for basis weight CD profile was determined by bump tests. After a follow up period the affect of the new response model and filtering was analysed.

Broadband excitation in the system identification of active magnetic bearing rotor systems

One of the targets of the climate and energy package of the European Union is to increase the energy efficiency in order to achieve a 20 percent reduction in primary energy use compared with the projected level by 2020. The energy efficiency can be improved for example by increasing the rotational speed of large electrical drives, because this enables the elimination of gearboxes leading to a compact design with lower losses. The rotational speeds of traditional bearings, such as roller bearings, are limited by mechanical friction. Active magnetic bearings (AMBs), on the other hand, allow very high rotational speeds. Consequently, their use in large medium- and high-speed machines has rapidly increased. An active magnetic bearing rotor system is an inherently unstable, nonlinear multiple-input, multiple-output system. Model-based controller design of AMBs requires an accurate system model. Finite element modeling (FEM) together with the experimental modal analysis provides a very accurate model for the rotor, and a linearized model of the magneticactuators has proven to work well in normal conditions. However, the overall system may suffer from unmodeled dynamics, such as dynamics of foundation or shrink fits. This dynamics can be modeled by system identification. System identification can also be used for on-line diagnostics. In this study, broadband excitation signals are adopted to the identification of an active magnetic bearing rotor system. The broadband excitation enables faster frequency response function measurements when compared with the widely used stepped sine and swept sine excitations. Different broadband excitations are reviewed, and the random phase multisine excitation is chosen for further study. The measurement times using the multisine excitation and the stepped sine excitation are compared. An excitation signal design with an analysis of the harmonics produced by the nonlinear system is presented. The suitability of different frequency response function estimators for an AMB rotor system are also compared. Additionally, analytical modeling of an AMB rotor system, obtaining a parametric model from the nonparametric frequency response functions, and model updating are discussed in brief, as they are key elements in the modeling for a control design. Theoretical methods are tested with a laboratory test rig. The results conclude that an appropriately designed random phase multisine excitation is suitable for the identification of AMB rotor systems.

Eating disorders, weight perception, and dieting in adolescence

Background: Eating disorders are serious psychiatric disorders, which usually have their onset in adolescence. Body dissatisfaction and dieting, both common among adolescents, are recognised risk factors for eating disorders. The aim of the present study was to assess the prevalence of eating disorders in the general adolescent population, assess the risk of developing eating disorders in subgroups of dieters, and analyse longitudinal concomitants of incorrect weight perception. Method: A prospective follow-up study on 595 adolescents, aged 15 at baseline, was conducted in western Finland. The study comprised questionnaires directed at the whole study population and subsequent personal interviews with adolescents found to be screen-positive for eating disorders, at both baseline and three-year follow-up. Results: The lifetime prevalence rates for 18 year old females were 2.6 % for anorexia nervosa, 0.4 for bulimia nervosa, and 9.0 % for eating disorder not otherwise specified (EDNOS). No prevalent case of DSM-IV eating disorders was found among the male participants. Eating disorders, as well as depressive symptoms, social anxiety, and low self-esteem, was more prevalent among females who perceived themselves as being overweight, despite being normal or underweight, when compared to females with a correct weight perception. An incorrect weight perception was associated in males with social anxiety. Female adolescents dieting due to psychological distress, rather than vanity or overweight, had a fifteen-fold risk of developing an eating disorder. Conclusions: Eating disorders are common among female adolescents, and adolescents choosing to diet due to psychological distress show a markedly increased risk of developing an eating disorder. Promotion of general well-being as well as the prevention of body dissatisfaction and misdirected dieting, accompanied by early detection and proper treatment of eating disorders, is needed to reduce the incidence of and facilitate recovery in adolescents suffering from eating disorders.

Cognitive Development of Very Low Birth Weight Children from Infancy to Pre-school Age

The survival of preterm born infants has increased but the prevalence of long-term morbidities has still remained high. Preterm born children are at an increased risk for various developmental impairments including both severe neurological deficits as well as deficits in cognitive development. According to the literature the developmental outcome perspective differs between countries, centers, and eras. Definitions of preterm infant vary between studies, and the follow-up has been carried out with diverse methods making the comparison less reliable. It is essential to offer parents upto-date information about the outcome of preterm infants born in the same area. A centralized follow-up of children at risk makes it possible to monitor the consequences of changes in the treatment practices of hospitals on developmental outcome. This thesis is part of a larger regional, prospective multidisciplinary follow-up project entitled “Development and Functioning of Very Low Birth Weight Infants from Infancy to School Age” (PIeniPAinoisten RIskilasten käyttäytyminen ja toimintakyky imeväisiästä kouluikään, PIPARI). The thesis consists of four original studies that present data of very low birth weight (VLBW) infants born between 2001 and 2006, who are followed up from the neonatal period until the age of five years. The main outcome measure was cognitive development and secondary outcomes were significant neurological deficits (cerebral palsy, CP, deafness, and blindness). In Study I, the early crying and fussing behavior of preterm infants was studied using parental diaries, and the relation of crying behavior and cognitive and motor development at the age of two years was assessed. In Study II, the developmental outcome (cognitive, CP, deafness, and blindness) at the age of two years was studied in relation to demographic, antenatal, neonatal, and brain imaging data. Development was studied in relationship to a full-term born control group born in the same hospital. In Study III, the stability of cognitive development was studied in VLBW and full-term groups by comparing the outcomes at the ages of two and five years. Finally, in Study IV the precursors of reading skills (phonological processing, rapid automatized naming, and letter knowledge) were assessed for VLBW and full-term children at the age of five years. Pre-reading skills were studied in relation to demographic, antenatal, neonatal, and brain imaging data. The main findings of the thesis were that VLBW infants who fussed or cried more in the infancy were not at greater risk for problems in their cognitive development. However, crying was associated with poorer motor development. The developmental outcome of the present population was better that has been reported earlier and this improvement covered also cognitive development. However, the difference to fullterm born peers was still significant. Major brain pathology and intestinal perforation were independent significant risk factors for adverse outcome, also when several individual risk factors were controlled for. Cognitive development at the age of two years was strongly related with development at the age of five years, stressing the importance of the early assessment, and the possibility for early interventions. Finally, VLBW children had poorer pre-reading skills compared with their full-term born peers, but the IQ was an important mediator even when children with mental retardation were excluded from the analysis. The findings suggest that counseling parents about the developmental perspectives of their preterm infant should be based on data covering the same birth hospital. Neonatal brain imaging data and neonatal morbidity are important predictors for developmental outcome. The findings of the present study stress the importance of both short-term (two years) and long-term (five years) follow-ups for the individual, and for improving the quality of care.

One chip solution for low-cost active magnetic bearing system

In this work the implementation of the active magnetic bearing control system in a single FPGA is studied. Requirements for the full magnetic bearing control system are reviewed. Different control methods for active magnetic bearings are described shortly. Flux and the current base controllers are implemented in a FPGA. Suitability of the con-trollers for a low-cost magnetic bearing application is studied. Floating-point arithmetic’s are used in the controllers to ease designing burden and improve calculation precision. Per-formance of the flux controller is verified with simulations.

The case of web based information environment in web based weight management services

Abstrakti

Individual dietary counselling during and after pregnancy: Impact on diet and body weight

In Finland, maternity and child health clinics play a key role in promoting health in young families. Currently, obesity causes the greatest challenges to clinics. In obese pregnant women, an increased risk for metabolic diseases exist which can affect both the mother and child. The purpose of this thesis was to explore the role of dietary counselling: in Finnish health clinics; in the regulation of dietary intake; and in affecting the body weight of women. The main aim was to test the effect of dietary counselling and probiotic intervention on dietary intake and maternal body weight during and after pregnancy. In addition to dietary counselling, the effect of other factors, such as eating behaviour on dietary intake and body weight control after pregnancy was assessed. Another aim was also to evaluate dietary counselling practices by nurses (n = 327) in Finnish health clinics assessed by a questionnaire. At the beginning of the pregnancy, women (n = 256) enrolled in a dietary intervention study, were randomised into three groups. One group received dietary counselling with probiotics, one had counselling with placebo and the third group was the control group. The control group consisted of women whom did not receive counselling and took placebo. Probiotics and placebo supplements were used until the end of exclusive breastfeeding or six months after pregnancy. Women were followed from early pregnancy up to four years after pregnancy. Follow-up visits took place three times during pregnancy, at one and six months, and one, two and four years after pregnancy. Dietary counselling, provided by a nutritionist, aimed to influence the quality of dietary fat intake. Dietary counselling is important to provide in clinics, as determined by the nurses, and these nurses expressed a want to improve their own nutritional knowledge through education. The nurses had varying knowledge of current dietary recommendations. Dietary counselling for women during and after pregnancy resulted in beneficial changes in dietary intake up to one year after pregnancy and body weight and waist circumference up to four years after pregnancy. Probiotics had a beneficial effect together with dietary counselling on waist circumference until one year after pregnancy, but not throughout the long term, four years after pregnancy. Other factors, such as eating behaviour, associated with dietary intake and body weight control after pregnancy. Specifically, dietary recommendations are reached amongst women whom had high cognitive restraint in their eating behaviour and did not demonstrate uncontrolled eating. Overweight women more frequently emotionally ate compared to normal weight women and women with central adiposity related more frequently to having an uncontrolled eating behaviour than women with normal waist circumference. In addition, being overweight prior to pregnancy and excessive weight gain during pregnancy associated with increased body weight retention after pregnancy. This study showed that individual dietary counselling is useful in influencing dietary intake which adheres to dietary recommendations and this counselling influences, favourably, body weight after pregnancy. Especially, women with the risk for weight retention, such as women who have emotional and uncontrolled eating behaviours, who were overweight prior to pregnancy or those who had excessive weight gain during pregnancy, may benefit from individual dietary counselling. This study underscores the need to develop dietary counselling practices for pregnant women and their follow-up after pregnancy in Finnish health clinics. These practices include increasing the efficacy of the counselling such as collaboration with families, having knowledgable health professionals and having sufficient resources.