27 resultados para Visualization Using Computer Algebra Tools

em Doria (National Library of Finland DSpace Services) - National Library of Finland, Finland


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Hydrometallurgical process modeling is the main objective of this Master’s thesis work. Three different leaching processes namely, high pressure pyrite oxidation, direct oxidation zinc concentrate (sphalerite) leaching and gold chloride leaching using rotating disc electrode (RDE) are modeled and simulated using gPROMS process simulation program in order to evaluate its model building capabilities. The leaching mechanism in each case is described in terms of a shrinking core model. The mathematical modeling carried out included process model development based on available literature, estimation of reaction kinetic parameters and assessment of the model reliability by checking the goodness fit and checking the cross correlation between the estimated parameters through the use of correlation matrices. The estimated parameter values in each case were compared with those obtained using the Modest simulation program. Further, based on the estimated reaction kinetic parameters, reactor simulation and modeling for direct oxidation zinc concentrate (sphalerite) leaching is carried out in Aspen Plus V8.6. The zinc leaching autoclave is based on Cominco reactor configuration and is modeled as a series of continuous stirred reactors (CSTRs). The sphalerite conversion is calculated and a sensitivity analysis is carried out so to determine the optimum reactor operation temperature and optimum oxygen mass flow rate. In this way, the implementation of reaction kinetic models into the process flowsheet simulation environment has been demonstrated.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The computer is a useful tool in the teaching of upper secondary school physics, and should not have a subordinate role in students' learning process. However, computers and computer-based tools are often not available when they could serve their purpose best in the ongoing teaching. Another problem is the fact that commercially available tools are not usable in the way the teacher wants. The aim of this thesis was to try out a novel teaching scenario in a complicated subject in physics, electrodynamics. The didactic engineering of the thesis consisted of developing a computer-based simulation and training material, implementing the tool in physics teaching and investigating its effectiveness in the learning process. The design-based research method, didactic engineering (Artigue, 1994), which is based on the theoryof didactical situations (Brousseau, 1997), was used as a frame of reference for the design of this type of teaching product. In designing the simulation tool a general spreadsheet program was used. The design was based on parallel, dynamic representations of the physics behind the function of an AC series circuit in both graphical and numerical form. The tool, which was furnished with possibilities to control the representations in an interactive way, was hypothesized to activate the students and promote the effectiveness of their learning. An effect variable was constructed in order to measure the students' and teachers' conceptions of learning effectiveness. The empirical study was twofold. Twelve physics students, who attended a course in electrodynamics in an upper secondary school, participated in a class experiment with the computer-based tool implemented in three modes of didactical situations: practice, concept introduction and assessment. The main goal of the didactical situations was to have students solve problems and study the function of AC series circuits, taking responsibility for theirown learning process. In the teacher study eighteen Swedish speaking physics teachers evaluated the didactic potential of the computer-based tool and the accompanying paper-based material without using them in their physics teaching. Quantitative and qualitative data were collected using questionnaires, observations and interviews. The result of the studies showed that both the group of students and the teachers had generally positive conceptions of learning effectiveness. The students' conceptions were more positive in the practice situation than in the concept introduction situation, a setting that was more explorative. However, it turned out that the students' conceptions were also positive in the more complex assessment situation. This had not been hypothesized. A deeper analysis of data from observations and interviews showed that one of the students in each pair was more active than the other, taking more initiative and more responsibilityfor the student-student and student-computer interaction. These active studentshad strong, positive conceptions of learning effectiveness in each of the threedidactical situations. The group of less active students had a weak but positive conception in the first iv two situations, but a negative conception in the assessment situation, thus corroborating the hypothesis ad hoc. The teacher study revealed that computers were seldom used in physics teaching and that computer programs were in short supply. The use of a computer was considered time-consuming. As long as physics teaching with computer-based tools has to take place in special computer rooms, the use of such tools will remain limited. The affordance is enhanced when the physical dimensions as well as the performance of the computer are optimised. As a consequence, the computer then becomes a real learning tool for each pair of students, smoothly integrated into the ongoing teaching in the same space where teaching normally takes place. With more interactive support from the teacher, the computer-based parallel, dynamic representations will be efficient in promoting the learning process of the students with focus on qualitative reasoning - an often neglected part of the learning process of the students in upper secondary school physics.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aim of this dissertation is to investigate if participation in business simulation gaming sessions can make different leadership styles visible and provide students with experiences beneficial for the development of leadership skills. Particularly, the focus is to describe the development of leadership styles when leading virtual teams in computer-­supported collaborative game settings and to identify the outcomes of using computer simulation games as leadership training tools. To answer to the objectives of the study, three empirical experiments were conducted to explore if participation in business simulation gaming sessions (Study I and II), which integrate face-­to-­face and virtual communication (Study III and IV), can make different leadership styles visible and provide students with experiences beneficial for the development of leadership skills. In the first experiment, a group of multicultural graduate business students (N=41) participated in gaming sessions with a computerized business simulation game (Study III). In the second experiment, a group of graduate students (N=9) participated in the training with a ‘real estate’ computer game (Study I and II). In the third experiment, a business simulation gaming session was organized for graduate students group (N=26) and the participants played the simulation game in virtual teams, which were organizationally and geographically dispersed but connected via technology (Study IV). Each team in all experiments had three to four students and students were between 22 and 25 years old. The business computer games used for the empirical experiments presented an enormous number of complex operations in which a team leader needed to make the final decisions involved in leading the team to win the game. These gaming environments were interactive;; participants interacted by solving the given tasks in the game. Thus, strategy and appropriate leadership were needed to be successful. The training was competition-­based and required implementation of leadership skills. The data of these studies consist of observations, participants’ reflective essays written after the gaming sessions, pre-­ and post-­tests questionnaires and participants’ answers to open-­ ended questions. Participants’ interactions and collaboration were observed when they played the computer games. The transcripts of notes from observations and students dialogs were coded in terms of transactional, transformational, heroic and post-­heroic leadership styles. For the data analysis of the transcribed notes from observations, content analysis and discourse analysis was implemented. The Multifactor Leadership Questionnaire (MLQ) was also utilized in the study to measure transformational and transactional leadership styles;; in addition, quantitative (one-­way repeated measures ANOVA) and qualitative data analyses have been performed. The results of this study indicate that in the business simulation gaming environment, certain leadership characteristics emerged spontaneously. Experiences about leadership varied between the teams and were dependent on the role individual students had in their team. These four studies showed that simulation gaming environment has the potential to be used in higher education to exercise the leadership styles relevant in real-­world work contexts. Further, the study indicated that given debriefing sessions, the simulation game context has much potential to benefit learning. The participants who showed interest in leadership roles were given the opportunity of developing leadership skills in practice. The study also provides evidence of unpredictable situations that participants can experience and learn from during the gaming sessions. The study illustrates the complex nature of experiences from the gaming environments and the need for the team leader and role divisions during the gaming sessions. It could be concluded that the experience of simulation game training illustrated the complexity of real life situations and provided participants with the challenges of virtual leadership experiences and the difficulties of using leadership styles in practice. As a result, the study offers playing computer simulation games in small teams as one way to exercise leadership styles in practice.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Yritykset ympäri maailmaa ovat saavuttaneet Leanin avulla hyviä tuloksia ja parantaneet kilpailukykyään. Lean on kokonaisvaltainen filosofia, jossa käytetään konkreettisia työkaluja kehittämisen tukena. Implementonnin onnistuminen edellyttää koko organisaation sitoutumista muutoksiin ja uusiin toimintamalleihin. Meconet yhtio pyrkii maailman luokan toimittajaksi ja haluaa edistää toiminnan kehittämistä leanin periaatteiden mukaisesti hyödyntämällä kokonaisvaltaisia Lean työkaluja. Meconet Oy:n Vantaan tehtaalla oli keväällä 2013 tavoitteena edistää jatkuvaa kehittymistä Kaizenin avulla. Lisäksi tavoitteena oli ryhtyä järjestelmällisesti seuraamaan suorituskykyä mittareiden avulla ja lisätä visuaalisuutta. Meconet Oy:n Vantaan tehtaalla muodostettiin toimintamalli päivittäiseen suorituskyvyn seurantaan, toteutetttiin useita kehitysprojekteja Kaizen periaatteiden mukaisesti ja lisättiin visuaalisia elementtejä tiedonkulun parantamiseksi.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The safe use of nuclear power plants (NPPs) requires a deep understanding of the functioning of physical processes and systems involved. Studies on thermal hydraulics have been carried out in various separate effects and integral test facilities at Lappeenranta University of Technology (LUT) either to ensure the functioning of safety systems of light water reactors (LWR) or to produce validation data for the computer codes used in safety analyses of NPPs. Several examples of safety studies on thermal hydraulics of the nuclear power plants are discussed. Studies are related to the physical phenomena existing in different processes in NPPs, such as rewetting of the fuel rods, emergency core cooling (ECC), natural circulation, small break loss-of-coolant accidents (SBLOCA), non-condensable gas release and transport, and passive safety systems. Studies on both VVER and advanced light water reactor (ALWR) systems are included. The set of cases include separate effects tests for understanding and modeling a single physical phenomenon, separate effects tests to study the behavior of a NPP component or a single system, and integral tests to study the behavior of the whole system. In the studies following steps can be found, not necessarily in the same study. Experimental studies as such have provided solutions to existing design problems. Experimental data have been created to validate a single model in a computer code. Validated models are used in various transient analyses of scaled facilities or NPPs. Integral test data are used to validate the computer codes as whole, to see how the implemented models work together in a code. In the final stage test results from the facilities are transferred to the NPP scale using computer codes. Some of the experiments have confirmed the expected behavior of the system or procedure to be studied; in some experiments there have been certain unexpected phenomena that have caused changes to the original design to avoid the recognized problems. This is the main motivation for experimental studies on thermal hydraulics of the NPP safety systems. Naturally the behavior of the new system designs have to be checked with experiments, but also the existing designs, if they are applied in the conditions that differ from what they were originally designed for. New procedures for existing reactors and new safety related systems have been developed for new nuclear power plant concepts. New experiments have been continuously needed.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Työn tavoitteena oli tutkia tislauskolonnin dynamiikkaa ja dynaamista mallintamista simulointien avulla. Dynaamisen simulointimallin avulla selvitettiin pentaanin erotuskolonnin toimintaa poikkeus- ja häiriötilanteissa. Lisäksi pyrittiin arvioimaan työssä käytettyjen simulointiohjelmistojen soveltuvuutta tislauksen dynaamiseen simulointiin. Työn kirjallisuusosassa käsiteltiin tislauskolonnindynamiikan mallintamista matemaattisten mallien avulla sekä tislauskolonnimallin rakentamista simulointiohjelmistoon. Kirjallisuusosassa esiteltiin myös tislauskolonnin häiriötilanteita ja niiden aiheuttamia varopurkaustapauksia. Tämän lisäksi kirjallisuusosassa käytiin läpi tislauskolonnin varoventtiilien mitoittamisen perusteita. Työn soveltavassa osassa muodostettiin tislauskolonnille dynaaminen simulointimalli Aspen HYSYS Dynamics ja PROSimulator-simulointiohjelmistolla. Mallien avulla tarkasteltiin erilaisten häiriöiden ja poikkeustilanteiden vaikutusta kolonnin käyttäytymiseen ja varopurkaus-tapauksiin. Työssä arvioitiin myös ohjelmistojen soveltuvuutta tislauksen dynaamiseen simulointiin. Työssä saatujen tulosten perusteella voidaan todeta, että dynaamisen simuloinnin avulla saadaan hyödyllistä tietoa tislauskolonnin toiminnasta häiriö- ja poikkeustilanteissa. Dynaamisen simuloinnin onnistuminen ja luotettavien tulosten saaminen edellyttää kuitenkin tarkasteltavan prosessin tuntemista ja ohjelmiston käytön hallintaa. Työssä käytetyn Aspen HYSYS Dynamics simulointiohjelmiston käytettävyydessä havaittiin puutteita ja ohjelmisto vaatii vielä kehitystyötä. Työssä käytetty PROSimulator-simulointiohjelmisto soveltui pienistä puutteista huolimatta hyvin tislauskolonnin häiriötilanteiden tutkimiseen.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This thesis examines coordination of systems development process in a contemporary software producing organization. The thesis consists of a series of empirical studies in which the actions, conceptions and artifacts of practitioners are analyzed using a theory-building case study research approach. The three phases of the thesis provide empirical observations on different aspects of systemsdevelopment. In the first phase is examined the role of architecture in coordination and cost estimation in multi-site environment. The second phase involves two studies on the evolving requirement understanding process and how to measure this process. The third phase summarizes the first two phases and concentrates on the role of methods and how practitioners work with them. All the phases provide evidence that current systems development method approaches are too naïve in looking at the complexity of the real world. In practice, development is influenced by opportunity and other contingent factors. The systems development processis not coordinated using phases and tasks defined in methods providing universal mechanism for managing this process like most of the method approaches assume.Instead, the studies suggest that managing systems development process happens through coordinating development activities using methods as tools. These studies contribute to the systems development methods by emphasizing the support of communication and collaboration between systems development participants. Methods should not describe the development activities and phases in a detail level, butshould include the higher level guidance for practitioners on how to act in different systems development environments.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Nopea teknologian kehitys sekä kansainvälistymisen mukana tuoma kilpailupaine pakottavat yritykset jatkuvaan liiketoimintaprosessien kehittämiseen. Muutoksista organisaation rakenteissa sekä yrityksen prosesseissa on tullut yleisiä toimenpiteitä. Yksi näkyvimmistä toiminnallisista uudistuksesta on ollut toiminnanohjausjärjestelmän käyttöönotto. Toiminnanohjausjärjestelmän rakenne ja kehitys aiheuttaa yleensä suurimmat vaikeudet pyrittäessä rakentamaan liiketoimintaprosessien läpinäkyvyyttä esittävä tietojärjestelmäympäristö. Tässä tutkimuksessa liiketoiminnan sekä toiminnanohjausjärjestelmän prosessien yhdistäminen on tehty ns. toiminnanohjausjärjestelmä muutostyökaluilla. Kyseiset muutostyökalut on järjestetty yrityksissä tietojärjestelmä ympäristöön ja niiden avulla voidaan korjata teknisiä ongelmia sekä muuttaa itse prosesseja. Tutkimuksen empiria osuudessa on käytetty case-tutkimusmenetelmää Kone Oyj:n prosessien kehittämisosastolla. Tutkimuksen tavoitteena oli parantaa toiminnanohjausjärjestelmän muutostyökalujen prosesseja, liiketoimintaprosessien sekä toiminnanohjausjärjestelmän yhdistämiseksi ja harmonisoimiseksi. Tutkimuksen tavoitteiden täyttämiseksi, prosessijohtamisen käsitteitä käytettiin muutostyökaluprosessien parannusehdotusten löytymiseksi. Prosessijohtamisen käsitteet tarkoittavat prosessikartan, prosessin toimintojen, sekä prosessin kustannusten tutkimista ja hyväksikäyttöä. Prosessijohtamisen käsitteeseen kuuluu myös liiketoimintaprosessien jatkuvan parantamisen sekä uudelleenjärjestämisen mallien kuvaus. Toiminnanohjausjärjestelmäympäristön kuvaus teorian toisena osuutena antaa pohjaa muutostyökalujen prosessien käytölle. Tutkimuksen tuloksina voidaan todeta että tutkimusalue on hyvin monimutkainen ja vaikea. Toimintajärjestelmistä ei ole kirjoitettu teoriaa kovinkaan runsaasti, lukuunottamatta yritysten itse tekemiä tutkimuksia. Tutkimuksessa tarkasteltaville prosesseille löytyi kuitenkin parannusehdotuksia sekä ns. optimaalisen prosessimallin ominaisuuksia.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tässä tutkimuksessa olen selvittänyt sähköisten työkalujen hyödyntämisen mandollisuuksista teollisuusyrityksessä epäsuorissa hankinnoissa. Tutkimuksessa olen paneuduttu e-hankinnan terminologiaan ja menetelmiin, joita markkinoilla on käytössä. E-hankinta on keskeisin tutkimusalue. Toimittajien etsintään ja niiden hallinnointiin keskittyvät työkalut olen rajannut pois tutkimuksestani. Tutkimuksessa olen selvittänyt e-hankinnan keskeisiä haasteita ja onnistumisen elementtejä, jotta e-hankinnan käyttöönotto olisi mandollisimman helposti tehtävissä. Lukuisten esimerkkien avulla pyrin kartoittamaan e-hankinnan levinneisyyttä ja lisäksi tuon esille niitä potentiaalisia säästökohteita ja kustannusten leikkauksia, joita on mandollista toteuttaa ottamalla käyttöön sähköisen hankintamallin. Tutkimuksen loppuosassa keskityn tutkimaan Perloksen hankintavolyymeja ja löytämään sieltä ne hankintakategoriat, joille tämä sähköinen hankintamalli olisi mandollista ottaa käyttöön. Tässä tutkimuksessa tulen esittämään sähköisen hankintamallin käyttöönottoa ja samalla merkittävän kehityshankkeen toteuttamista lähitulevaisuudessa. Lopullisen päätöksen sähköisen hankintamallin käyttöönotosta ja projektin toteuttamisesta tekee yrityksen johto. Yrityksen johdolle sitten lopulta jää punnittavaksi, kuinka strategisena ja ajankohtaan nähden sopivana tämän tyyppisen kehitysprojektin toteuttaminen nähdään.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Diplomityössä kehitettiin kannettava työstölaite, jolla voidaan bombeerata tukkivannesahojen suuret teräpyörät omilla laakereillaan paikoillaan sahalinjoissa. Teräpyörät kuluvat käytössä, jolloin ne joudutaan työstämään uudelleen muotoonsa useita kertoja vuodessa. Nykyisin pyörien kehäpinnat hiotaan haluttuun muotoon lähes sadan vuoden ikäiseen keksintöön perustuvalla menetelmällä. Menetelmän suurimpina ongelmina ovat saavutettavan bombeerausmuodon heikko tarkkuus, työstötapahtuman hitaus ja puutteellinen työturvallisuus. Kehitetyn bombeerauslaitteen ja -menetelmän avulla parannetaan kaikkia kolmea merkittävää puutetta. Työssä kartoitettiin kattavasti erilaisia mahdollisia työstömenetelmiä, joita voitaisiin käyttää teräpyörien bombeeraukseen. Parhaaksi vaihtoehdoksi osoittautui sorvaus, jonka avulla teräpyörien kehäpinnat saadaan työstettyä tarkasti, nopeasti ja varmasti käyttämällä tavallisia sorvin työkaluja ja uutta ehdotettua kannettavaa sorvia.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The threats caused by global warming motivate different stake holders to deal with and control them. This Master's thesis focuses on analyzing carbon trade permits in optimization framework. The studied model determines optimal emission and uncertainty levels which minimize the total cost. Research questions are formulated and answered by using different optimization tools. The model is developed and calibrated by using available consistent data in the area of carbon emission technology and control. Data and some basic modeling assumptions were extracted from reports and existing literatures. The data collected from the countries in the Kyoto treaty are used to estimate the cost functions. Theory and methods of constrained optimization are briefly presented. A two-level optimization problem (individual and between the parties) is analyzed by using several optimization methods. The combined cost optimization between the parties leads into multivariate model and calls for advanced techniques. Lagrangian, Sequential Quadratic Programming and Differential Evolution (DE) algorithm are referred to. The role of inherent measurement uncertainty in the monitoring of emissions is discussed. We briefly investigate an approach where emission uncertainty would be described in stochastic framework. MATLAB software has been used to provide visualizations including the relationship between decision variables and objective function values. Interpretations in the context of carbon trading were briefly presented. Suggestions for future work are given in stochastic modeling, emission trading and coupled analysis of energy prices and carbon permits.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Whenever a spacecraft is launched it is essential that the algorithms in the on-board software systems and at ground control are efficient and reliable over extended periods of time. Geometric numerical integrators, and in particular variational integrators, have both these characteristics. In "Numerics of Spacecraft Dynamics" new numerical integrators are presented and analysed in depth. These algorithms have been designed specifically for the dynamics of spacecraft and artificial satellites in Earth orbits. Full analytical solutions to a class of integrable deformations of the two-body problem in classical mechanics are derived, and a systematic method to compute variational integrators to arbitrary order with a computer algebra system is introduced.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Direct-driven permanent magnet synchronous generator is one of the most promising topologies for megawatt-range wind power applications. The rotational speed of the direct-driven generator is very low compared with the traditional electrical machines. The low rotational speed requires high torque to produce megawatt-range power. The special features of the direct-driven generators caused by the low speed and high torque are discussed in this doctoral thesis. Low speed and high torque set high demands on the torque quality. The cogging torque and the load torque ripple must be as low as possible to prevent mechanical failures. In this doctoral thesis, various methods to improve the torque quality are compared with each other. The rotor surface shaping, magnet skew, magnet shaping, and the asymmetrical placement of magnets and stator slots are studied not only by means of torque quality, but also the effects on the electromagnetic performance and manufacturability of the machine are discussed. The heat transfer of the direct-driven generator must be designed to handle the copper losses of the stator winding carrying high current density and to keep the temperature of the magnets low enough. The cooling system of the direct-driven generator applying the doubly radial air cooling with numerous radial cooling ducts was modeled with a lumped-parameter-based thermal network. The performance of the cooling system was discussed during the steady and transient states. The effect of the number and width of radial cooling ducts was explored. The large number of radial cooling ducts drastically increases the impact of the stack end area effects, because the stator stack consists of numerous substacks. The effects of the radial cooling ducts on the effective axial length of the machine were studied by analyzing the crosssection of the machine in the axial direction. The method to compensate the magnet end area leakage was considered. The effect of the cooling ducts and the stack end area effects on the no-load voltages and inductances of the machine were explored by using numerical analysis tools based on the three-dimensional finite element method. The electrical efficiency of the permanent magnet machine with different control methods was estimated analytically over the whole speed and torque range. The electrical efficiencies achieved with the most common control methods were compared with each other. The stator voltage increase caused by the armature reaction was analyzed. The effect of inductance saturation as a function of load current was implemented to the analytical efficiency calculation.