Models for vertical wood density of Scots pine, Norway spruce and birch stems, and their application to determine average wood density

Abstract

Analysis of Industrial Granular Flow Applications by Using Advanced Collision Models

Granular flow phenomena are frequently encountered in the design of process and industrial plants in the traditional fields of the chemical, nuclear and oil industries as well as in other activities such as food and materials handling. Multi-phase flow is one important branch of the granular flow. Granular materials have unusual kinds of behavior compared to normal materials, either solids or fluids. Although some of the characteristics are still not well-known yet, one thing is confirmed: the particle-particle interaction plays a key role in the dynamics of granular materials, especially for dense granular materials. At the beginning of this thesis, detailed illustration of developing two models for describing the interaction based on the results of finite-element simulation, dimension analysis and numerical simulation is presented. The first model is used to describing the normal collision of viscoelastic particles. Based on some existent models, more parameters are added to this model, which make the model predict the experimental results more accurately. The second model is used for oblique collision, which include the effects from tangential velocity, angular velocity and surface friction based on Coulomb's law. The theoretical predictions of this model are in agreement with those by finite-element simulation. I n the latter chapters of this thesis, the models are used to predict industrial granular flow and the agreement between the simulations and experiments also shows the validation of the new model. The first case presents the simulation of granular flow passing over a circular obstacle. The simulations successfully predict the existence of a parabolic steady layer and show how the characteristics of the particles, such as coefficients of restitution and surface friction affect the separation results. The second case is a spinning container filled with granular material. Employing the previous models, the simulation could also reproduce experimentally observed phenomena, such as a depression in the center of a high frequency rotation. The third application is about gas-solid mixed flow in a vertically vibrated device. Gas phase motion is added to coherence with the particle motion. The governing equations of the gas phase are solved by using the Large eddy simulation (LES) and particle motion is predicted by using the Lagrangian method. The simulation predicted some pattern formation reported by experiment.

A Graphical Pattern Editor for Java Frameworks

Ohjelmistojen uudelleenkäyttö on hyvin tärkeä käsite ohjelmistotekniikan alueella.Ohjelmistojen uudelleenkäyttötekniikat parantavat ohjelmistokehitysprosessin laatua. Yleisiä ratkaisuja sekä ohjelmiston suunnittelun että arkkitehtuurin uudelleenkäyttöön ovat olio-ohjelmointi ja sovelluskehykset. Tähän asti ei ole ollut olemassa yleisiä tapoja sovelluskehysten erikoistamiseen. Monet nykyääntunnetuista sovelluskehyksistä ovat hyvin suuria ja mutkikkaita. Tällaisten sovelluskehyksien käyttö on monimutkaista myös kokeneille ohjelmoijille. Hyvin dokumentoidut uudelleenkäytettävät sovelluskehyksen rajapinnat parantavat kehyksen käytettävyyttä ja tehostavat myös erikoistamisprosessiakin sovelluskehyksen käyttäjille. Sovelluskehyseditori (framework editor, JavaFrames) on prototyyppityökalu, jota voidaan käyttää yksinkertaistamaan sovelluskehyksen käyttöä. Perusajatus JavaFrames lähestymistavassa ovat erikoistamismallit, joita käytetään kuvamaan sovelluskehyksen uudelleenkäytettäviä rajapintoja. Näihin malleihin perustuen JavaFrames tarjoaa automaattisen lähdekoodi generaattorin, dokumentoinninja arkkitehtuurisääntöjen tarkistuksen. Tämä opinnäyte koskee graafisen mallieditorin kehittämistä JavaFrames ympäristöön. Työssä on laadittu työkalu,jonka avulla voidaan esittää graafisesti erikoistamismalli. Editori sallii uusien mallien luomisen, vanhojen käyttämättä olevien poistamisen, kuten myös yhteyksien lisäämisen mallien välille. Tällainen graafinen tuki JavaFrames ympäristöönvoi huomattavasti yksinkertaistaa sen käyttöä ja tehdä sovellusten kehittämisprosessista joustavamman.

Development of a PC Tool for Estimating Pressure Drops in Forced-convection Boiler Tubes

Kaksifaasivirtauksen kuvaamiseen käytettävät mallit, ja menetelmät kaksifaasivirtauksen painehäviön määrittämiseksi kehittyvät yhä monimutkaisimmiksi. Höyrystinputkissa tapahtuvien painehäviöiden arvioinnin vaatiman laskennan suorittamiseksi tietokoneohjelman kehittäminen on välttämätöntä. Tässä työssä on kehitetty itsenäinen PC-ohjelma painehäviöiden arvioimiseksi pakotetulle konvektiovirtaukselle pystysuorissa höyrykattilan höyrystinputkissa. Veden ja vesihöyryn aineominaisuuksien laskentaan käytetään IAPWS-IF97 –yhtälökokoelmaa sekä muita tarvittavia IAPWS:n suosittelemia yhtälöitä. Höyrystinputkessa kulloinkin vallitsevan virtausmuodon määrittämiseen käytetään sovelluskelpoisia virtausmuotojen välisiä rajoja kuvaavia yhtälöitä. Ohjelmassa käytetään painehäviön määritykseen kirjallisuudessa julkaistuja yhtälöitä, virtausmuodosta riippuen, alijäähtyneelle virtaukselle, kupla-, tulppa- ja rengasvirtaukselle sekä tulistetun höyryn virtaukselle. Ohjelman laskemia painehäviöarvioita verrattiin kirjallisuudesta valittuihin mittaustuloksiin. Laskettujen painehäviöiden virhe vaihteli välillä –19.5 ja +23.9 %. Virheiden itseisarvojen keskiarvo oli 12.8 %.

Modelling of the PWR PACTEL vertical steam generator with the TRACE code

The behavior of the nuclear power plants must be known in all operational situations. Thermal hydraulics computer applications are used to simulate the behavior of the plants. The computer applications must be validated before they can be used reliably. The simulation results are compared against the experimental results. In this thesis a model of the PWR PACTEL steam generator was prepared with the TRAC/RELAP Advanced Computational Engine computer application. The simulation results can be compared against the results of the Advanced Process Simulator analysis software in future. Development of the model of the PWR PACTEL vertical steam generator is introduced in this thesis. Loss of feedwater transient simulation examples were carried out with the model.

Evaluation of Bubble Formation and Break Up in Suppression Pools by Using Pattern Recognition Methods

During a possible loss of coolant accident in BWRs, a large amount of steam will be released from the reactor pressure vessel to the suppression pool. Steam will be condensed into the suppression pool causing dynamic and structural loads to the pool. The formation and break up of bubbles can be measured by visual observation using a suitable pattern recognition algorithm. The aim of this study was to improve the preliminary pattern recognition algorithm, developed by Vesa Tanskanen in his doctoral dissertation, by using MATLAB. Video material from the PPOOLEX test facility, recorded during thermal stratification and mixing experiments, was used as a reference in the development of the algorithm. The developed algorithm consists of two parts: the pattern recognition of the bubbles and the analysis of recognized bubble images. The bubble recognition works well, but some errors will appear due to the complex structure of the pool. The results of the image analysis were reasonable. The volume and the surface area of the bubbles were not evaluated. Chugging frequencies calculated by using FFT fitted well into the results of oscillation frequencies measured in the experiments. The pattern recognition algorithm works in the conditions it is designed for. If the measurement configuration will be changed, some modifications have to be done. Numerous improvements are proposed for the future 3D equipment.

Model-View-Controller architectural pattern and its evolution in graphical user interface frameworks

Model-View-Controller (MVC) is an architectural pattern used in software development for graphical user interfaces. It was one of the first proposed solutions in the late 1970s to the Smart UI anti-pattern, which refers to the act of writing all domain logic into a user interface. The original MVC pattern has since evolved in multiple directions, with various names and may confuse many. The goal of this thesis is to present the origin of the MVC pattern and how it has changed over time. Software architecture in general and the MVC’s evolution within web applications are not the primary focus. Fundamen- tal designs are abstracted, and then used to examine the more recent versions. Prob- lems with the subject and its terminology are also presented.

Early Life Intestinal Microbiota in Health and in Atopic Eczema

Decrease in microbial contacts in affluent societies is considered to lie behind the rise in allergic and other chronic inflammatory diseases during the last decades. Indeed, deviations in the intestinal microbiota composition and diversity have been associated with several diseases, such as atopic eczema. However, there is no consensus yet on what would constitute a beneficial or harmful microbiota. The aim of this thesis was to study the microbiota development in healthy infants and to characterize intestinal microbiota signatures associated with disease status and severity in infants with atopic eczema. The methodological aim was to compare and optimize methods for DNA extraction from fecal samples to be used in high-throughput microbiota analyses. It was confirmed that the most critical step in successful microbial DNA extraction from fecal samples is the mechanical cell lysis procedure. Based on this finding, an efficient semi-automated extraction process was developed that can be scaled for use in high-throughput platforms such as phylogenetic microarray used in this series of studies. By analyzing a longitudinal motherchild cohort for 3 years it was observed that the microbiota development is a gradual process, where some bacterial groups reach the degree of adult-type pattern earlier than others. During the breast-feeding period, the microbiota appeared to be relatively simple, while major diversification was found to start during the weaning process. By the age of 3 years, the child’s microbiota composition started to resemble that of an adult, but the bacterial diversity has still not reached the full diversity, indicating that the microbiota maturation extends beyond this age. In addition, at three years of age, the child’s microbiota was more similar to mother’s microbiota than to microbiota of nonrelated women.In infants with atopic eczema, a high total microbiota diversity and abundance of butyrate-producing bacteria was found to correlate with mild symptoms at 6 months. At 18 months, infants with mild eczema had significantly higher microbiota diversity and aberrant microbiota composition when compared to healthy controls at the same age. In conclusion, the comprehensive phylogenetic microarray analysis of early life microbiota shows the synergetic effect of vertical transmission and shared environment on the intestinal microbiota development. By the age of three years, the compositional development of intestinal microbiota is close to adult level, but the microbiota diversification continues beyond this age. In addition, specific microbiota signatures are associated with the existence and severity of atopic eczema and intestinal microbiota seems to have a role in alleviating the symptoms of this disease.