Painatuksen UV-stabiilisuuden optimointi fenolihartsatussa paperissa

Tässä diplomityössä tutkittiin painetun paperin ja siitä fenoliformaldehydihartsilla impregnoimalla valmistetun pinnoituskalvon UV-stabiilisuuden parantamis-mahdollisuuksia. Työn kirjallisuusosassa käsitellään painetun pinnoituskalvon valmistusprosessia ja painatuksen UV-valonkestoon vaikuttavia tekijöitä. Painovärin pigmentti, sen määrä ja käsittely, painovärin sideaine sekä fenoliformaldehydihartsi ja sen lisäaineet vaikuttavat pinnoitetun betonoimisvanerin säänkesto-ominaisuuksiin. Erilaisilla epäorgaanisilla valkoisilla pigmenteillä ja kidemuodoilla on erilainen UV-valonkesto ja taitekerroin. Päällystämällä titaanidioksidi esimerkiksi alumiini- tai zirkoniumoksideilla sen UV-valonkestoa voidaan parantaa merkittävästi. UV-hajoaminen voidaan havaita painetun pinnoitteen liituuntumisena. Liituuntumista voidaan pitää veden ja hapen välisenä reaktiona, jota titaanidioksidi ja UV-säteily katalysoivat. Sen takia myös muiden valkoisten epäorgaanisten pigmenttien ominaisuuksia ja käyttöä selvitettiin. Kokeissa käytettiin yhdeksää eri painoväriä, kahta eri paksuista paperia ja kahta eri tyyppistä hartsia. Painovärejä ohennettiin vedellä ja paperin painopuolta vaihdeltiin. Kaikissa painatuksissa käytettiin kolmea eri rasterointiasteen laattaa, jolloin painovärin määrää paperissa saatiin vähennettyä. Painetuista papereista mitattiin densiteetti, värimäärä, pisara-absorptio vedellä ja kontaktikulma hartsilla. Myös painovärin tunkeumaa selvitettiin paperin poikkileikeistä tehtyjen SEM-kuvien avulla. Painetut paperit impregnoitiin fenoliformaldehydihartsilla kalvoksi. Pinnoituskalvot puristettiin vanerin pinnalle laboratoriopuristimella. Koekappaleet altistettiin UV-valolle, sateelle ja pakkaselle sääkaapissa 400 h ajan, mikä vastaa noin 1,5 vuotta ulkona Suomen oloissa. Kappaleista mitattiin kiilto, värinmuutos ja liituuntuminen. Pinnoitteen liituuntumista tapahtui vähiten niissä koepisteissä, joissa painatus oli tehty 30 % rasteroidulla laatallaSäänkestävä TiO2 osoittautui hyväksi, mutta myös ZnO-pigmentillä saatiin hyviä tuloksia. ZnO-koepisteessä liituuntumisreaktio ei ole niin voimakkaasti katalysoitu kuin TiO2-koepisteissä. Paksun paperin painatuspuolella näytti olevan merkitystä säänkestoon. Huopapuolelle painettuna pinnoitteen liituuntuminen oli vähäisempää

Suodatuskalvon puhdistaminen UV-valolla tai ultraäänellä aktivoidulla titaanidioksidilla

Kalvotekniikan suurin ongelma on edelleen kalvon likaantuminen, jonka tuloksena kalvon erotuskyky voi muuttua ja liuoksen vuo kalvon läpi pientyä huomattavasti. Kalvotekniikan teollisissa sovelluksissa kalvojen puhdistus on yksi tärkeimmistä pääkohdista, sillä se määrittää kalvon käyttöikää ja käyttötehokkuutta. Yleisimmin käytetyn kemiallisen pesun tuloksena muodostuu hävitettävä pesuliuos, joka sisältää sekä kemikaaleja, että kalvosta poistetun lian. Työssä on tutkittu kalvon puhdistusta ultravioletti-valo- tai ultraäänikäsittelyssä titaanidioksidin läsnäollessa. Menetelmien mahdollisina etuina ovat kalvosta poistetun lian hajotus harmittomiksi komponenteiksi ja mahdollisesti kalvon pienempi kuluminen pesussa. Työn kirjallisuusosassa on käsitelty orgaanisten ja epäorgaanisten aineiden hajottamista ultraviolettivalon tai ultraäänikäsittelyn avulla titaanidioksidin läsnäollessa sekä olosuhteiden vaikutusta menetelmien tehokkuuteen. Tämän lisäksi työssä on keskitytty polymeerikalvojen UV-valo- ja ultraäänikäsittelykestävyyteen. Kokeellisessa osassa on tutkittu UV-valo- ja ultraäänikäsittelyjen sopivuutta liatun PVDF-kalvon puhdistukseen titaanidioksidin läsnäollessa. Tavoitteena oli liatun kalvon permeabiliteetin palautus puhtaan kalvon tasolle käsittelyn avulla. Kalvon kestävyyttä on myös tutkittu. Tämän työn perusteella tutkittuja menetelmiä ei voida soveltaa tarkistettavan PVDF-kalvon puhdistukseen, ainakaan testeissä käytetyissä olosuhteissa, sillä kalvon ominaisuudet muuttuvat käsittelyissä.

Marjojen flavonoidien uuttaminen

Flavonoidit ovat kasvien polyfenolisia sekundäärimetaboliitteja, jotka koostuvat 15-hiilisestä C6-C3-C6-perusrungosta. Niillä on havaittu useita terveyden kannalta edullisia ominaisuuksia kuten antioksidatiivisia, antikarsinogeenisia, antiallergeenisia, anti-inflammatorisia, estrogeenisia sekä antimikrobiaalisia vaikutuksia. Kasvimateriaalia käyttävän elintarviketeollisuuden sivuvirrat ovat flavonoidi-pitoisten jakeiden arvokkaita raaka-aineita. Tässä työssä tarkoituksena oli tutkia marjojen puristusjäännöksen sisältämien flavonoidien uuttamista ja uuttautumiseen vaikuttavia tekijöitä kuten liuottimen koostumusta ja määrää, uuttolämpötilaa ja -aikaa sekä liuottimen lisäaineita. Uutteet analysointiin HPLC:lla käyttäen ODS-2-kolonnia ja gradienttieluointia. Komponentit detektoitiin niille tyypillisillä UV-VIS-aallonpituuksilla ja identifioitiin vertaamalla flavonoidiprofiililtaan tunnettujen marjojen kromatogrammeihin. Antosyaanien kvantitatiiviseen analysointiin käytettiin spektrofotometrista pH-eromenetelmää ja tulokset ilmoitettiin syanidiini-3-glukosidina. Uutteiden kestävyyttä tutkittiin säilyttämällä näytteitä eri olosuhteissa sekä lisäämällä niihin uuton saantoon ja komponenttien säilyvyyteen vaikuttavia aineita. Useimmat tutkituista hapoista paransivat flavonoidien saantoa ja uutteiden säilyvyyttä, mutta esim. askorbiinihapon lisääminen nopeutti tiettyjen uutteen sisältämien flavonoidien tuhoutumista.

Gas-phase photocatalytic oxidation of volatile organic compounds

Substances emitted into the atmosphere by human activities in urban and industrial areas cause environmental problems such as air quality degradation, respiratory diseases, climate change, global warming, and stratospheric ozone depletion. Volatile organic compounds (VOCs) are major air pollutants, emitted largely by industry, transportation and households. Many VOCs are toxic, and some are considered to be carcinogenic, mutagenic, or teratogenic. A wide spectrum of VOCs is readily oxidized photocatalytically. Photocatalytic oxidation (PCO) over titanium dioxide may present a potential alternative to air treatment strategies currently in use, such as adsorption and thermal treatment, due to its advantageous activity under ambient conditions, although higher but still mild temperatures may also be applied. The objective of the present research was to disclose routes of chemical reactions, estimate the kinetics and the sensitivity of gas-phase PCO to reaction conditions in respect of air pollutants containing heteroatoms in their molecules. Deactivation of the photocatalyst and restoration of its activity was also taken under consideration to assess the practical possibility of the application of PCO to the treatment of air polluted with VOCs. UV-irradiated titanium dioxide was selected as a photocatalyst for its chemical inertness, non-toxic character and low cost. In the present work Degussa P25 TiO2 photocatalyst was mostly used. In transient studies platinized TiO2 was also studied. The experimental research into PCO of following VOCs was undertaken: - methyl tert-butyl ether (MTBE) as the basic oxygenated motor fuel additive and, thus, a major non-biodegradable pollutant of groundwater; - tert-butyl alcohol (TBA) as the primary product of MTBE hydrolysis and PCO; - ethyl mercaptan (ethanethiol) as one of the reduced sulphur pungent air pollutants in the pulp-and-paper industry; - methylamine (MA) and dimethylamine (DMA) as the amino compounds often emitted by various industries. The PCO of VOCs was studied using a continuous-flow mode. The PCO of MTBE and TBA was also studied by transient mode, in which carbon dioxide, water, and acetone were identified as the main gas-phase products. The volatile products of thermal catalytic oxidation (TCO) of MTBE included 2-methyl-1-propene (2-MP), carbon monoxide, carbon dioxide and water; TBA decomposed to 2-MP and water. Continuous PCO of 4 TBA proceeded faster in humid air than dry air. MTBE oxidation, however, was less sensitive to humidity. The TiO2 catalyst was stable during continuous PCO of MTBE and TBA above 373 K, but gradually lost activity below 373 K; the catalyst could be regenerated by UV irradiation in the absence of gas-phase VOCs. Sulphur dioxide, carbon monoxide, carbon dioxide and water were identified as ultimate products of PCO of ethanethiol. Acetic acid was identified as a photocatalytic oxidation by-product. The limits of ethanethiol concentration and temperature, at which the reactor performance was stable for indefinite time, were established. The apparent reaction kinetics appeared to be independent of the reaction temperature within the studied limits, 373 to 453 K. The catalyst was completely and irreversibly deactivated with ethanethiol TCO. Volatile PCO products of MA included ammonia, nitrogen dioxide, nitrous oxide, carbon dioxide and water. Formamide was observed among DMA PCO products together with others similar to the ones of MA. TCO for both substances resulted in the formation of ammonia, hydrogen cyanide, carbon monoxide, carbon dioxide and water. No deactivation of the photocatalyst during the multiple long-run experiments was observed at the concentrations and temperatures used in the study. PCO of MA was also studied in the aqueous phase. Maximum efficiency was achieved in an alkaline media, where MA exhibited high fugitivity. Two mechanisms of aqueous PCO – decomposition to formate and ammonia, and oxidation of organic nitrogen directly to nitrite - lead ultimately to carbon dioxide, water, ammonia and nitrate: formate and nitrite were observed as intermediates. A part of the ammonia formed in the reaction was oxidized to nitrite and nitrate. This finding helped in better understanding of the gasphase PCO pathways. The PCO kinetic data for VOCs fitted well to the monomolecular Langmuir- Hinshelwood (L-H) model, whereas TCO kinetic behaviour matched the first order process for volatile amines and the L-H model for others. It should be noted that both LH and the first order equations were only the data fit, not the real description of the reaction kinetics. The dependence of the kinetic constants on temperature was established in the form of an Arrhenius equation.

High voltage discharge for degradation of organic contaminants in water

The pulsed dielectric barrier discharge (PDBD) and pulsed corona discharge (PCD) were compared for their efficiency to degrade phenol in water solution. Results show that PCD has higher efficiency than PDBD to degrade phenol. When initial pH of water solution was elevated, phenol degradation in the PCD reactor was significantly enhanced, although no considerable effect was seen in the PDBD reactor. The PCD reactor was also able to degrade lignin significantly, both in synthetically prepared solution and in pulp and paper mill wastewater. Water temperature did not affect phenol degradation; however, lignin was better oxidized at lower temperature.

The evaluation of hazardous gas components caused by the thermal degradation of plant oils and animal fats

Neste Oil has introduced plant oils and animal fats for the production of NExBTL renewable diesel, and these raw materials differ from the conventional mineral based oils. One subject of new raw materials study is thermal degradation, or in another name pyrolysis, of these organic oils and fats. The aim of this master’s thesis is to increase knowledge on thermal degradation of these new raw materials, and to identify possible gaseous harmful thermal degradation compounds. Another aim is to de-termine the health and environmental hazards of identified compounds. One objective is also to examine the formation possibilities of hazardous compounds in the produc-tion of NExBTL-diesel. Plant oils and animal fats consist mostly of triglycerides. Pyrolysis of triglycerides is a complex phenomenon, and many degradation products can be formed. Based on the literature studies, 13 hazardous degradation products were identified, one of which was acrolein. This compound is very toxic and dangerous to the environment. Own pyrolysis experiments were carried out with rapeseed and palm oils, and with a mix-ture of palm oil and animal fat. At least 12 hazardous compounds, including acrolein, were analysed from the gas phase. According to the experiments, the factors which influence on acrolein formation are the time of the experiment, the sphere (air/hydrogen) in which the experiment is carried out, and the characteristics of the used oil. The production of NExBTL-diesel is not based on pyrolysis. This is why thermal degradation is possible only when abnormal process conditions prevail.

Effects of Surface Properties and Wood Modification into Direct Printing on Wood

Building industry is a high volume branch which could provide prominent markets for wood based interior decoration solutions. Competition in interior decoration markets requires versatility in appearance. Versatility in wood appearance and added value could be achieved by printing grain patterns of different species or images directly onto wood. The problem when planning wood printing’s implementing into durable applications is basically how to transfer a high quality image or print sustainably onto wood, which is porous, heterogeneous, dimensionally unstable, non-white and rough. Wood preservation or treating, and modification can provide durability against degradation but also effect to the surface properties of wood which will effect on printability. Optimal adhesion is essential into print quality, as too high ink absorbance can cause spreading and too low ink absorbance cause pale prints. Different printing techniques have different requirements on materials and production. The direct printing on wood means, that intermedias are not used. Printing techniques with flexible printing plates or in fact non-impact techniques provide the best basis for wood printing. Inkjet printing of wood with different mechanical or chemical surface treatments, and wood plastic composite material gave good results that encourage further studies of the subject. Sanding the wood surface anti-parallel to the grain gave the best overall printing quality. Spreading parallel to the grain could not be avoided totally, except in cases where wood was treated hydrophobic so adhesion of the ink was not sufficient. Grain pattern of the underlying wood stays clearly visible in the printed images. Further studies should be made to fine tune the methods that already gave good results. Also effects of moisture content of wood, different inks, and long-term exposure to UV-radiation should be tested.

Photoinhibition of Photosystem II. Kinetics, Photoprotection and Mechanism

Photosystem II (PSII) is susceptible to light-induced damage defined as photoinhibition. In natural conditions, plants are capable of repairing the photoinhibited PSII by on-going degradation and re-synthesis of the D1 reaction centre protein of PSII. Photoinhibition is induced by both visible and ultraviolet light and photoinhibition occurs under all light intensities with the same efficiency per photon. In my thesis work, I studied the reaction kinetics and mechanism of photoinhibition of PSII, as well as photoprotection in leaves of higher plants. Action spectroscopy was used to identify photoreceptors of photoinhibition. I found that the action spectrum of photoinhibition in vivo shows resemblance to the absorption spectra of manganese model compounds of the oxygen evolving complex (OEC) suggesting a role for manganese as a photoreceptor of photoinhibition under UV and visible light. In order to study the protective effect of non-photochemical quenching, the action spectrum was measured from leaves of wild type Arabidopsis thaliana and two mutants impaired in nonphotochemical quenching of chlorophyll a excitations. The findings of action spectroscopy and simulations of chlorophyll-based photoinhibition mechanisms suggested that quenching of antenna excitations protects less efficiently than would be expected if antenna chlorophylls were the only photoreceptors of photoinhibition. The reaction kinetics of prolonged photoinhibition was studied in leaves of Cucurbita maxima and Capsicum annuum. The results indicated that photoinhibitory decrease in both the oxygen evolution activity and ratio of variable to maximum fluorescence follows firstorder kinetics in vivo. The persistence of first-order kinetics suggests that already photoinhibited reaction centres do not protect against photoinhibition and that the mechanism of photoinhibition does not have a reversible intermediate. When Cucurbita maxima leaves were photoinhibited with saturating single-turnover flashes and continuous light, the light response curve of photoinhibition was found to be essentially a straight line with both types of illumination, suggesting that similar photoinhibition mechanisms might function during illumination with continuous light and during illumination with short flashes.

Puulevystä valmistettujen kalusteosien pintakäsittelyn kehittäminen UV-telalinjalla

Diplomityö tehtiin Kidex Oy:lle, joka on Kiteellä sijaitseva Martela-konsernin tytäryhtiö. Kidex Oy toimii sopimusvalmistajana Martelalle sekä muille valituille levykalusteasiakkaille, ja tuotteet ovat pääasiassa toimisto- ja keittiökalusteita. Kevättalvella 2008 yritykseen siirrettiin Nummelasta pintakäsittelyosasto, jolla on tehty petsaus- ja lakkaustöitä. Näiden lisäksi tehtaalla on pohdittu mahdollisuuksia maalaustöihin, jotta UV-telalinjan kapasiteetti saataisiin paremmin käyttöön Työssä selvitettiin, mitä muutoksia UV-kovettuvilla aineilla maalaaminen vaatii linjaan ja luotiin edellytykset maalaustoiminnan aloittamiselle. Muutokset pyrittiin pitämään niin vähäisinä kuin mahdollista. Lisäksi määritettiin maalattavien tuotteiden laadun kriteerit ja todennusmenetelmät, jotka voidaan viestiä asiakkaille väärinkäsitysten välttämiseksi. Laadun todentamista varten valmistettiin sarja koekappaleita, joista mitattiin asiakkaan kannalta tärkeimmät maalikalvon ominaisuudet. Työssä tarkasteltiin myös pintakäsittelylaitoksia koskevaa VOC-asetusta ja verrattiin liuottimien kulutusta asetuksen määrittämiin rajoihin. Puulevystä valmistettujen kalusteosien pintakäsittely UV-telalinjalla eroaa oleellisesti perinteisistä menetelmistä esimerkiksi tuotantonopeuden osalta, joka johtuu pääasiassa pinnoitekalvon hetkessä tapahtuvasta kovettumisesta UV-valon vaikutuksesta. UV-aineet ovat käytännössä täysin kiinteistä aineista koostuvia, eivätkä näin sisällä vaarallisia haihtuvia liuottimia. UV-kovettuvilla tuotteilla maalaaminen on viime vuosina runsaasti tutkittu alue, joka eroaa tietyiltä osin myös pintakäsittelystä UV-kirkaslakoilla. Pigmentoitujen kalvojen kovettuminen vaatii erilaista UV-säteilyä ja levitysmäärien seuranta on huomattavasti tarkempaa.

Determination of sugars and organic acids in pulp samples by capillary electrophoresis with UV detection

This MSc work was done in the project of BIOMECON financed by Tekes. The prime target of the research was, to develop methods for separation and determination of carbohydrates (sugars), sugar acids and alcohols, and some other organic acids in hydrolyzed pulp samples by capillary electrophoresis (CE) using UV detection. Aspen, spruce, and birch pulps are commonly used for production of papers in Finland. Feedstock components in pulp predominantly consist of carbohydrates, organic acids, lignin, extractives, and proteins. Here in this study, pulps have been hydrolyzed in analytical chemistry laboratories of UPM Company and Lappeenranta University in order to convert them into sugars, acids, alcohols, and organic acids. Foremost objective of this study was to quantify and identify the main and by-products in the pulp samples. For the method development and optimization, increased precision in capillary electrophoresis was accomplished by calculating calibration data of 16 analytes such as D-(-)-fructose, D(+)-xylose, D(+)-mannose, D(+)-cellobiose, D-(+)-glucose, D-(+)-raffinose, D(-)-mannitol, sorbitol, rhamnose, sucrose, xylitol, galactose, maltose, arabinose, ribose, and, α-lactose monohydratesugars and 16 organic acids such as D-glucuronic, oxalic, acetic, propionic, formic, glycolic, malonic, maleic, citric, L-glutamic, tartaric, succinic, adipic, ascorbic, galacturonic, and glyoxylic acid. In carbohydrate and polyalcohol analyses, the experiments with CE coupled to direct UV detection and positive separation polarity was performed in 36 mM disodium hydrogen phosphate electrolyte solution. For acid analyses, CE coupled indirect UV detection, using negative polarity, and electrolyte solution made of 2,3 pyridinedicarboxylic acid, Ca2+ salt, Mg2+ salts, and myristyltrimethylammonium hydroxide in water was used. Under optimized conditions, limits of detection, relative standard deviations and correlation coefficients of each compound were measured. The optimized conditions were used for the identification and quantification of carbohydrates and acids produced by hydrolyses of pulp. The concentrations of the analytes varied between 1 mg – 0.138 g in liter hydrolysate.

Uv. Lilla slafvinnan ("Ali Baba") : alkusoitto

Soitinnus: orkesteri.