Vesivoiman ajosuunnittelu

Diplomityön tavoitteena oli tutkia UPM-Kymmene Oyj:n keskusvalvomossa tapahtuvaa vesivoiman ajosuunnittelua. Pääkohdat tarkastelussa olivat vesistöjen säännöstely, erilaiset vesivuodet ja sähkömarkkinatilanteet. Vesivoiman ajosuunnittelua tarkasteltiin pääasiassa erilaisten vesivuosien ja sähkömarkkinatilanteiden näkökulmasta. Lähtötietoina käytettiin Suomen ympäristökeskuksen vesistömallijärjestelmän ja UPM-Kymmene Oyj:n energianhallintajärjestelmän numeerisia historia-arvoja. Työssäselvitettiin UPM-Kymmene Oyj:n vesivarannoista hyödynnettävissä olevat energiamäärät. Energiamäärien avulla määritettiin skenaario UPM-Kymmene Oyj:n vesivoimantuotannon vaihtelusta. Lisäksi tarkasteltiin vesivoimaa sähkötaseen säätövoimana. Teoreettisessa osassa perehdyttiin Suomen sähköntuotantorakenteeseen, vesivoiman asemaan sähköntuotannossa ja vesivoiman ohjausmekanismeihin. Lisäksi tarkasteltiin UPM-Kymmene Oyj:n sähkön käyttöä ja vesivarantoja. Soveltavassa osassa tarkasteltiin, miten vesivoiman ohjausmekanismit toimivat käytännössä. Lisäksi analysoitiin sähkömarkkinatilanteiden vaikutuksia ja vesivoimalaitosten ajon tehostamismahdollisuuksia. Työn tuloksena laadittiin ennuste-simulaattori, jolla voidaan optimoida vesivoimanja lauhdevoiman ajoa. Tulevaisuudessa simulaattorin avulla voidaan ennustaa poikkeuksellisia sähkömarkkinatilanteita.

Hulevesikuormitus ja sen vähentäminen rakennetulla alueella

Työssä tarkasteltiin hulevesien ravinnekuormituksen muodostumista ja kuormituksen vähentämismahdollisuuksia rakennetussa ympäristössä esimerkkialueena Sunisenlahden valuma-alue. Työn tavoitteena oli löytää ns. hotspot- alueet ja esittää valuma-alueelle osa-alueittain käsittelymenetelmä, joka soveltuu kyseisen alueen hulevesien käsittelyyn, huomioi alueen maankäytön, maastoprofiilin, maanomistuksesta ja maaperästä johtuvat rajoitukset. Sunisenlahden valuma-alue on kokonaisuudessaan rakennettua, jakautuen 24 osavaluma-alueeseen, joiden pinta-alat ja maankäyttö poikkeavat toisistaan. Alueella on kauttaaltaan sadevesiverkosto, jonka purku tapahtuu pääosin Sunisenlahdelle. Osa valuma-alueista on keskustamaisia, osa väljästi rakennettua pientaloaluetta. Joillakin valuma-alueilla on myös toimintoja, joiden hulevesien käsittely edellyttää myös haitta-aineiden poistamista. Valuma-alueella tutkittiin ravinnekuormituksen muodostumista näyttein 12 näytepisteellä. Typpikuormituksesta hulevesien osuus on noin 48 % ja fosforikuormituksesta hulevesien osuus on noin 36 %.

Persistent organic pollutants in sediments and fish from Lake Victoria, Uganda

This thesis describes the occurrence and sources of selected persistent organic pollutants (POPs) such as polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and hexachlorocyclohexanes (HCHs) in the northern watershed of Lake Victoria. Sediments and fish were collected from three highly polluted embayments (i.e. Murchison Bay, Napoleon Gulf and Thurston Bay) of the lake. The analysis for PCDD/Fs, PCBs and PBDEs was done using a high resolution mass spectrometer coupled to a gas chromatograph (GC), and a GC equipped with an electron capture detector was used for HCHs. Total (Σ) PCDD/Fs, PCBs and PBDEs in sediments ranged from 3.19 to 478, 313 to 4325 and 60.8 to 179 pg g-1 dry weight (dw), respectively. The highest concentrations of pollutants were found at sites close to industrial areas and wastewater discharge points. The maximum concentrations of PCDD/Fs, PCBs, PBDEs and HCHs in fish muscle homogenates were 49, 779, 495 and 45,900 pg g-1 wet weight (ww), respectively. The concentrations of the pollutants in Nile perch (Lates niloticus) were significantly greater than those in Nile tilapia (Oreochromis niloticus), possibly due to differences in trophic level and dietary feeding habits among fish species. World Health Organization-toxic equivalency quotient (WHO2005-TEQ) values in the sediments were up to 4.24 pg g-1 dw for PCDD/Fs and 0.55 pg TEQ g-1 dw for the 12 dioxin-like PCBs (dl-PCBs). 23.1% of the samples from the Napoleon Gulf were above the interim sediment quality guideline value of 0.85 pg WHO-TEQ g-1 dw set by the Canadian Council for Ministers of the Environment. The WHO2005-TEQs in fish were 0.001-0.16 pg g-1 for PCDD/Fs and 0.001-0.31 pg g-1 ww for dl- PCBs. The TEQ values were within a permissible level of 3.5 pg g−1 ww recommended by the European Commission. Based on the Commission set TEQs and minimum risk level criteria formulated by the Agency for Toxic Substances and Disease Registry, the consumption of fish from Lake Victoria gives no indication of health risks associated to PCDD/Fs and PCBs. Principal component analysis (PCA) indicated that anthropogenic activities such as agricultural straw open burning, medical waste incinerators and municipal solid waste combustors were the major sources of PCDD/Fs in the watershed of Lake Victoria. The ratios of α-/γ-HCH varied from 0.89 to 1.68 suggesting that the highest HCH residues mainly came from earlier usage and fresh γ-HCH (lindane). In the present study, the concentration of POPs in fish were not significantly related to those in sediments, and the biota sediment accumulation factor (BSAF) concept was found to be a poor predictor of the bioavailability and bioaccumulation of environmental pollutants.

Geochemistry and water quality of Lake Qarun, Egypt

Water geochemistry is a very important tool for studying the water quality in a given area. Geology and climate are the major natural factors controlling the chemistry of most natural waters. Anthropogenic impacts are the secondary sources of contamination in natural waters. This study presents the first integrative approach to the geochemistry and water quality of surface waters and Lake Qarun in the Fayoum catchment, Egypt. Moreover, geochemical modeling of Lake Qarun was firstly presented. The Nile River is the main source of water to the Fayoum watershed. To investigate the quality and geochemistry of this water, water samples from irrigation canals, drains and Lake Qarun were collected during the period 2010‒2013 from the whole Fayoum drainage basin to address the major processes and factors governing the evolution of water chemistry in the investigation area. About 34 physicochemical quality parameters, including major ions, oxygen isotopes, trace elements, nutrients and microbiological parameters were investigated in the water samples. Multivariable statistical analysis was used to interpret the interrelationship between the different studied parameters. Geochemical modeling of Lake Qarun was carried out using Hardie and Eugster’s evolutionary model and a model simulated by PHREEQC software. The crystallization sequence during evaporation of Lake Qarun brine was also studied using a Jänecke phase diagram involving the system Na‒K‒Mg‒ Cl‒SO4‒H2O. The results show that the chemistry of surface water in the Fayoum catchment evolves from Ca- Mg-HCO3 at the head waters to Ca‒Mg‒Cl‒SO4 and eventually to Na‒Cl downstream and at Lake Qarun. The main processes behind the high levels of Na, SO4 and Cl in downstream waters and in Lake Qarun are dissolution of evaporites from Fayoum soils followed by evapoconcentration. This was confirmed by binary plots between the different ions, Piper plot, Gibb’s plot and δ18O results. The modeled data proved that Lake Qarun brine evolves from drainage waters via an evaporation‒crystallization process. Through the precipitation of calcite and gypsum, the solution should reach the final composition "Na–Mg–SO4–Cl". As simulated by PHREEQC, further evaporation of lake brine can drive halite to precipitate in the final stages of evaporation. Significantly, the crystallization sequence during evaporation of the lake brine at the concentration ponds of the Egyptian Salts and Minerals Company (EMISAL) reflected the findings from both Hardie and Eugster’s evolutionary model and the PHREEQC simulated model. After crystallization of halite at the EMISAL ponds, the crystallization sequence during evaporation of the residual brine (bittern) was investigated using a Jänecke phase diagram at 35 °C. This diagram was more useful than PHREEQC for predicting the evaporation path especially in the case of this highly concentrated brine (bittern). The predicted crystallization path using a Jänecke phase diagram at 35 °C showed that halite, hexahydrite, kainite and kieserite should appear during bittern evaporation. Yet the actual crystallized mineral salts were only halite and hexahydrite. The absence of kainite was due to its metastability while the absence of kieserite was due to opposed relative humidity. The presence of a specific MgSO4.nH2O phase in ancient evaporite deposits can be used as a paleoclimatic indicator. Evaluation of surface water quality for agricultural purposes shows that some irrigation waters and all drainage waters have high salinities and therefore cannot be used for irrigation. Waters from irrigation canals used as a drinking water supply show higher concentrations of Al and suffer from high levels of total coliform (TC), fecal coliform (FC) and fecal streptococcus (FS). These waters cannot be used for drinking or agricultural purposes without treatment, because of their high health risk. Therefore it is crucial that environmental protection agencies and the media increase public awareness of this issue, especially in rural areas.