33 resultados para Technological centre
em Doria (National Library of Finland DSpace Services) - National Library of Finland, Finland
Resumo:
Educaworks Oy on toiminut viisi vuotta oppimistehtaana, jonka omistajia ovat olleet yritykset ja oppilaitokset. Yrityksen pääasiallisia työntekijöitä ovat tähän mennessä olleet ammattiopiston työssäoppijat ja parina viimeisenä vuotena on yrityksellä ollut palkkalistoillaan omia työntekijöitä. Tässä työssä luotiin vaihtoehtoja Educaworks Oy:n tulevalle toiminnalle lähtien siitä, että tämä nykyinen toimintamalli on tullut tiensä päähän ja tarvitaan uusi malli toiminnan jatkamiselle.Työssä haettiin hyviä käytäntöjä Suomesta benchmarkingin avulla. Näiden mallienvahvuuksia hyödyntämällä pystyttiin kehittämään vaihtoehto Educaworks Oy:n tulevalle toiminnalle. Tämä malli, oppimistehdas osana osaamiskeskittymää, valittiin toteutettavaksi kolmesta eri vaihtoehdosta, joista kaksi muuta olivat oppimistehdas yrityksenä ja oppimistehdas osana koulutusorganisaatiota. Valitussa vaihtoehdossa hyödynnetään Savonia-ammattikorkeakoulun suunnitteilla olevaa EducaTech Center-hanketta, jossa on tarkoitus luoda Iisalmeen teknologiateollisuuden osaamiskeskittymä seuraavan EU-kauden 2007-2013 aikana. Valitussa mallissa Educaworks Oy hyödyntää tulevassa toiminnassaan tämän osaamiskeskittymän uutta kone- ja laitekantaa sekä tekee yhteistyötä keskittymän tutkimus- ja tuotekehityshenkilökunnan kanssa. Yritykset pääsevät parhaiten osallisiksi Educa Tech Center osaamiskeskittymän tuottamista palveluista hankkimalla Educaworks Oy:n osakkeita ja pääsemällä täten keskittymän ytimeen sen tuotannollisen toimijan, Educaworks Oy:n, avulla. Educaworks Oy toimii tässä keskittymässä komponenttitoimittajan roolissa ollen malli komponenttitoimittajasta muillealueella oleville vastaaville verkostoissa toimiville yrityksille. Educaworks Oy:n toiminnan toisena periaatteena tulee olemaan työssäoppiminen. Työssäoppiminen on tänä päivänä osa ammatillista koulutusta ja sen merkityskorostuu yhä enemmän, koska oppilaat tulevat opiskelemaan tänä päivänä monesti lähtökohdista, joissa heillä ei ole ollut mahdollisuutta harjoittaa käytännön taitojaan ennen ammatillisten opiskelujen aloittamista. Työpaikoilla ei ole vielä kovin hyvää valmiutta toteuttaa sitä opetushallituksen tavoitetta, että oppilaatoppisivat työssäoppimisjaksoilla uusia asioita ohjatusti. Työpaikoilta puuttuu työssäoppimisen ohjaajat ja oppilaiden tekemät harjoitteet ovat liian monta kertaa ammatillisesti kovin vaatimattomia jäysteenpoisto- tai kappaleenvaihtotöitä koneistuksesta puhuttaessa. Tässä työssä luodaan mallia oppilaiden ohjatulle työssäoppimiselle tehtyjen tieteellisten tutkimusten pohjalta. Tavoitteena on, että Educaworks Oy:ssä pystyttäisiin jatkossa kouluttamaan myös muiden alueen teknologiateollisuuden yritysten työntekijöitä toimimaan työssäoppimisen ohjaajina.
Resumo:
Over the past few decades, turbulent change has characterized the situation in the media industry. It has been noted that digitalization and new media are strongly influencing the industry: it is changing the existing market dynamics and requires new strategies. Prior research on the impact of digitalization and the Internet has emphasized news-focused media such as newspaper publishing and broadcasting, yet magazine publishing is very seldom the focus of the research. This study examines how the Internetimpacts magazine publishing. The work presents a multi-level analysis on the role and impact of the Internet on magazine products, companies and industry. The study is founded on strategic management, technology management and media economics literature. This study consists of two parts. The first part introduces the research topic and discusses the overall results of the study. The second part comprises five research publications. Qualitative research methods are used throughout. The results of the study indicate that the Internet has not had a disruptive effect on magazine publishing, and that its strategic implications could rather be considered complementary to the print magazine and the business as a whole. It seems that the co-specialized assets, together with market-related competencies and unchanged core competence have protected established firms from the disruptive effect of the new technology in magazine publishing. In addition, it seems that the Internet offers a valuable possibility to build and nourish customer relationships. The study contributes tomedia management and economics research by moving from product- or industry-level investigations towards a strategic-management perspective.
Resumo:
Tämä julkaisu ilmestyy Turussa 18.–19.5.2009 järjestettävien valtakunnallisten kielikeskuspäivien yhteydessä. Turun yliopiston kielikeskus viettää samaan aikaan 30-vuotisjuhlaansa. Erään luokittelun mukaan 30–45-vuotias elää varsinaista keski-ikäänsä, kun taas joissakin katsotaan, että 28–35 vuoden ikä on vasta ns.
Resumo:
This thesis deals with improving international airport baggage supply chain management (SCM) by means of information technology and new baggage handling system. This study aims to focus on supply chain visibility in practice and to suggest different ways to improve the supply chain performance through information sharing. The objective is also to define how radio frequency identification (RFID) and enterprise resource planning (ERP) can make processes more transparent. In order to get full benefits from processes, effective business process management and monitoring as well as the key performance indicators must be defined, implemented and visualized through e.g. dashboard views for different roles. As an outcome of the research the need for the use of information technology systems and more advanced technologies, e.g. RFID in the supply chain management is evident. Sophisticated ERP is crucial in boosting SCM business processes and profitability. This would be beneficial for dynamic decision making as well in the airport and airline supply chain management. In the long term, economic aspects support the actions I have suggested in order to make production more flexible in reacting to quick changes.
Resumo:
Growing recognition of the electricity grid modernization to enable new electricity generation and consumption schemes has found articulation in the vision of the Smart Grid platform. The essence of this vision is an autonomous network with two-way electricity power flows and extensive real-time information between the generation nodes, various electricity-dependent appliances and all points in-between. Three major components of the Smart Grids are distributed intelligence, communication technologies, and automated control systems. The aim of this thesis is to recognize the challenges that Smart Grids are facing, while extinguishing the main driving factors for their introduction. The scope of the thesis also covers possible place of electricity Aggregator Company in the current and future electricity markets. Basic functions of an aggregator and possible revenue sources along with demand response feasibility calculations are reviewed within this thesis.
Resumo:
The main outcome of the master thesis is innovative solution, which can support a choice of business process modeling methodology. Potential users of this tool are people with background in business process modeling and possibilities to collect required information about organization’s business processes. Master thesis states the importance of business process modeling in implementation of strategic goals of organization. It is made by revealing the place of the concept in Business Process Management (BPM) and its particular case Business Process Reengineering (BPR). In order to support the theoretical outcomes of the thesis a case study of Northern Dimension Research Centre (NORDI) in Lappeenranta University of Technology was conducted. On its example several solutions are shown: how to apply business process modeling methodologies in practice; in which way business process models can be useful for BPM and BPR initiatives; how to apply proposed innovative solution for a choice of business process modeling methodology.
Resumo:
APROS (Advanced Process Simulation Environment) is a computer simulation program developed to simulate thermal hydraulic processes in nuclear and conventional power plants. Earlier research at VTT Technological Research Centre of Finland had found the current version of APROS to produce inaccurate simulation results for a certain case of loop seal clearing. The objective of this Master’s thesis is to find and implement an alternative method for calculating the rate of stratification in APROS, which was found to be the reason for the inaccuracies. Brief literature study was performed and a promising candidate for the new method was found. The new method was implemented into APROS and tested against experiments and simulations from two test facilities and the current version of APROS. Simulation results with the new version were partially conflicting; in some cases the new method was more accurate than the current version, in some the current method was better. Overall, the new method can be assessed as an improvement.
Resumo:
Euroopan sähkömarkkinat ovat viime vuosikymmeninä olleet suurien muutoksien kohteena näiden yhtenäistämisprojektin seurauksena. Fortum, yksi Euroopan johtavista energia-alan yrityksistä valmistautuu tähän muutokseen toteuttamalla omia yrityksen sisäisiä muutoksia, tavoitteenaan yksinkertaistaa organisaatiorakennettaan ja parantaa tehokkuuttaan. Yksi suuri muutos tähän liittyen on vesivoimavalvomojen lokalisaatioprojekti. Vesivoimavalvomojen uudelleenlokalisaation ja vesivoiman käytönvalvojien ikääntymisen myötä nähtiin tarpeelliseksi tehdä tutkimus käytönvalvojien hiljaisesta tiedosta. Näin ollen, tässä diplomityössä perehdyttiin Fortumin vesivoiman käytönvalvojien kompetensseihin ja näiden hiljaiseen tietoon. Tutkimusaiheena oli selvittää minkälaista hiljaista tietoa käytönvalvojat omaavat, ja mikä osa tästä tiedosta muodostaa sen kriittisen osaamisen, jota halutaan säilyttää ja kehittää. Tutkimustyypiksi muodostui kvalitatiivinen, jonka päämetodi oli puoli-avoin haastattelu. Tutkimus koostui seuraavista vaiheista: tarkkailu, tekstianalyysi, haastattelu, transkriptio ja data analyysi. Haastatteluja tehtiin kahdeksan, joista kerääntyi yli 24 tuntia haastattelumateriaalia. Tästä materiaalista muodostettiin analyysien avulla taulukko, jonka avulla tunnistettiin ne osa-alueet, joihin käytönvalvojan tärkeimmät kompetenssit liittyvät. Tuloksilla saatiin myös kerättyä lista korjaus- ja kehityskohteista, sekä tarkemmat määritykset jatkotutkimukselle.
Resumo:
Kristiina Hormia-Poutasen esitys Jerusalemissa Israelin kansalliskirjastossa 8.9.2011
Resumo:
Kristiina Hormia-Poutasen esitys Jerusalemissa 8.9.2011
Resumo:
Introduction of second-generation biofuels is an essential factor for meeting the EU’s 2020 targets for renewable energy in the transport sector and enabling the more ambitious targets for 2030. Finland’s forest industry is strongly involved in the development and commercialising of second-generation biofuel production technologies. The goal of this paper is to provide a quantified insight into Finnish prospects for reaching the 2020 national renewable energy targets and concurrently becoming a large-scale producer of forest biomass based second-generation biofuels feeding the increasing demand in European markets. The focus of the paper is on assessing the potential for utilising forest biomass for liquid biofuels up to 2020. In addition, technological issues related to the production of second-generation biofuels were reviewed. Finland has good opportunities to realise a scenario to meet 2020 renewable energy targets and for large-scale production of wood based biofuels. In 2020, biofuel production from domestic forest biomass in Finland may reach nearly a million ton (40 PJ). With the existing biofuel production capacity (20 PJ/yr) and national biofuel consumption target (25 PJ) taken into account, the potential net export of biofuels from Finland in 2020 would be 35 PJ, corresponding to 2–3% of European demand. Commercialisation of second-generation biofuel production technologies, high utilisation of the sustainable harvesting potential of Finnish forest biomass, and allocation of a significant proportion of the pulpwood harvesting potential for energy purposes are prerequisites for this scenario. Large-scale import of raw biomass would enable remarkably greater biofuel production than is described in this paper.