Competitiveness Survey of a Biofuel Power Plant

Työn tarkoituksena on tarkastella Euroopan siirtymätalousalueelta kotimaisen biopoltto-ainevoimalaitoksen kilpailukykyä potentiaalisimmiksi markkinakohteiksi arvioitujen nykyisten Eu-valtioiden osalta. Työ tehdään osana kokoluokaltaan 3,5 MWth/1,0 MWe pienvoimalaitoksen tuotekehityshanketta, joka on käynnistynyt Varkaudessa tämän vuoden maaliskuussa. Potentiaalisimpien siirtymätalousmaiden valintakriteereinä on käytetty aiempia tutkimuksia ja raportteja. Huomio keskitetään kiinteän biopolttoaineen resursseihin ja biopolttoaineisiin pohjautuvalle energiantuotannolle asetettuihin tavoitteisiin. Edellä mainittujen kriteerien pohjalta tarkasteltaviksi valittujen valtioiden osalta tehtiin tarkemmat kilpailukykyanalyysit, otettiin yhteyttä markkina-alueeltaalan ammattilaisiin ja kartoitettiin potentiaalisimmat markkinakohteet. Tavoitteena on arvioida varteenotettavin kilpailija kiinteisiin biopolttoaineisiin pohjautuvalle sähkön ja lämmön yhteistuotannolle, jonka perusteella laaditaan mallivoimalaitoksen kilpailukykyisen hinnan määrittämiseksi tiettyyn takaisinmaksuaikaan ja korkotekijään perustuen. Lopulta tehdään maakohtaisesti yhteenveto merkittävimmistä markkinapotentiaaliin vaikuttavista kilpailutekijöistä, arvioidaan potentiaalisin kohdemaa sekä esitetään mahdollinen investoinnin rahoitusvaihtoehto ja keinoja markkinoida tuotetta potentiaalisille asiakkaille.

A Large-Sized Multiwire Proportional Counter for Radiological Survey of Large Areas and Surfaces

Työn tavoitteena oli selvittää, miten eri parametrit vaikuttavat monilankaisen verrannollisuuslaskurin laskennallisiin ominaisuuksiin sekä voidaanko suurikokoista monilankaverrannollisuuslaskuria käyttää tehokkaasti suurien pintojen ? - ja ?- kontaminaation mittaamiseen. Ensin selvitettiin EU:n nykyistä clearing-käytäntöä sekä hahmoteltiin tulevia materiaalivirtoja, esiteltiin verrannollisuuslaskurin ja sen monilankamallin toimintaperiaate sekä käytettävien materiaalien ominaisuudet. Kootun teorian pohjalta selvitettiin tärkeimpien parametrien vaikutus ilmaisimen laskennallisiin ominaisuuksiin. Lopuksi suoritettiin rakenteilla olevan monilankaverrannollisuuslaskurin alustava testaus. Tulevien vuosien aikana eri puolilla maailmaa suljettavat erityyppiset ydinlaitokset luovat suuren tarpeen tehokkaiden kontaminaatiomittauslaitteistojen kehittämiselle. Tällä hetkellä mittaukset suoritetaan lähinnä noin 1 dm2 käsi-instrumentein, joten suurikokoinen, automatisoitu mittauslaitteisto sekä tehostaisi mittausprosessia suuresti sekä säästäisi runsaasti miestyötunteja. Jatkotoimenpiteiksi ehdotetaan laitteiston jatkotestausta, liikkeen ja nopeuden testausta sekä lopulta paikkaherkkyystoiminnon toteuttamisperiaatteen valintaa ja testausta.

Survey of transportation of liquid bulk chemicals in the Baltic Sea

This study is made as a part of the Chembaltic (Risks of Maritime Transportation of Chemicals in Baltic Sea) project which gathers information on the chemicals transported in the Baltic Sea. The purpose of this study is to provide an overview of handling volumes of liquid bulk chemicals (including liquefied gases) in the Baltic Sea ports and to find out what the most transported liquid bulk chemicals in the Baltic Sea are. Oil and oil products are also viewed in this study but only in a general level. Oils and oil products may also include chemical-related substances (e.g. certain bio-fuels which belong to MARPOL annex II category) in some cargo statistics. Chemicals in packaged form are excluded from the study. Most of the facts about the transport volumes of chemicals presented in this study are based on secondary written sources of Scandinavian, Russian, Baltic and international origin. Furthermore, statistical sources, academic journals, periodicals, newspapers and in later years also different homepages on the Internet have been used as sources of information. Chemical handling volumes in Finnish ports were examined in more detail by using a nationwide vessel traffic system called PortNet. Many previous studies have shown that the Baltic Sea ports are annually handling more than 11 million tonnes of liquid chemicals transported in bulk. Based on this study, it appears that the number may be even higher. The liquid bulk chemicals account for approximately 4 % of the total amount of liquid bulk cargoes handled in the Baltic Sea ports. Most of the liquid bulk chemicals are handled in Finnish and Swedish ports and their proportion of all liquid chemicals handled in the Baltic Sea is altogether over 50 %. The most handled chemicals in the Baltic Sea ports are methanol, sodium hydroxide solution, ammonia, sulphuric and phosphoric acid, pentanes, aromatic free solvents, xylenes, methyl tert-butyl ether (MTBE) and ethanol and ethanol solutions. All of these chemicals are handled at least hundred thousand tonnes or some of them even over 1 million tonnes per year, but since chemical-specific data from all the Baltic Sea countries is not available, the exact tonnages could not be calculated in this study. In addition to these above-mentioned chemicals, there are also other high volume chemicals handled in the Baltic Sea ports (e.g. ethylene, propane and butane) but exact tonnes are missing. Furthermore, high amounts of liquid fertilisers, such as solution of urea and ammonium nitrate in water, are transported in the Baltic Sea. The results of the study can be considered indicative. Updated information about transported chemicals in the Baltic Sea is the first step in the risk assessment of the chemicals. The chemical-specific transportation data help to target hazard or e.g. grounding/collision risk evaluations to chemicals that are handled most or have significant environmental hazard potential. Data gathered in this study will be used as background information in later stages of the Chembaltic project when the risks of the chemicals transported in the Baltic Sea are assessed to highlight the chemicals that require special attention from an environmental point of view in potential marine accident situations in the Baltic Sea area.

Bay of Bengal : a survey of the sea face of the Soondurbuns

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Current State of Ontology Matching. A Survey of Ontology and Schema Matching

Ontology matching is an important task when data from multiple data sources is integrated. Problems of ontology matching have been studied widely in the researchliterature and many different solutions and approaches have been proposed alsoin commercial software tools. In this survey, well-known approaches of ontologymatching, and its subtype schema matching, are reviewed and compared. The aimof this report is to summarize the knowledge about the state-of-the-art solutionsfrom the research literature, discuss how the methods work on different application domains, and analyze pros and cons of different open source and academic tools inthe commercial world.

3D Mesh Simplification. A survey of algorithms and CAD model simplification tests

Simplification of highly detailed CAD models is an important step when CAD models are visualized or by other means utilized in augmented reality applications. Without simplification, CAD models may cause severe processing and storage is- sues especially in mobile devices. In addition, simplified models may have other advantages like better visual clarity or improved reliability when used for visual pose tracking. The geometry of CAD models is invariably presented in form of a 3D mesh. In this paper, we survey mesh simplification algorithms in general and focus especially to algorithms that can be used to simplify CAD models. We test some commonly known algorithms with real world CAD data and characterize some new CAD related simplification algorithms that have not been surveyed in previous mesh simplification reviews.

Value Creation of Professional Services

The aim of this qualitative thesis is to research, how professional services create value, and what are the key factors affecting on this process. A model describing value creation process in professional services will be explained, based on the existing literature and three in depth discussions with professional service representatives. Professional services are such services that are tend to base on problem solving and require high skills and knowledge of a professional. These services often have a consultative or an advisory nature, and they often involve both client and a company in service process. As the service is often delivered in somewhat collaboration so is the value created. The results of this thesis revealed that value is created in collaboration or co-operation in professional services. Therefore, value co-creation, as a concept, is exact to describe the value creation process in professional services. This thesis also revealed that value is co- created in continuous communication between a client and a company and no value or only a little value can be created if there is no effective communication during the professional service process.