Computational Analysis and Optimization of Real Gas Flow In Small Centrifugal Compressors

Small centrifugal compressors are more and more widely used in many industrialsystems because of their higher efficiency and better off-design performance comparing to piston and scroll compressors as while as higher work coefficient perstage than in axial compressors. Higher efficiency is always the aim of the designer of compressors. In the present work, the influence of four partsof a small centrifugal compressor that compresses heavy molecular weight real gas has been investigated in order to achieve higher efficiency. Two parts concern the impeller: tip clearance and the circumferential position of the splitter blade. The other two parts concern the diffuser: the pinch shape and vane shape. Computational fluid dynamics is applied in this study. The Reynolds averaged Navier-Stokes flow solver Finflo is used. The quasi-steady approach is utilized. Chien's k-e turbulence model is used to model the turbulence. A new practical real gas model is presented in this study. The real gas model is easily generated, accuracy controllable and fairly fast. The numerical results and measurements show good agreement. The influence of tip clearance on the performance of a small compressor is obvious. The pressure ratio and efficiency are decreased as the size of tip clearance is increased, while the total enthalpy rise keeps almost constant. The decrement of the pressure ratio and efficiency is larger at higher mass flow rates and smaller at lower mass flow rates. The flow angles at the inlet and outlet of the impeller are increased as the size of tip clearance is increased. The results of the detailed flow field show that leakingflow is the main reason for the performance drop. The secondary flow region becomes larger as the size of tip clearance is increased and the area of the main flow is compressed. The flow uniformity is then decreased. A detailed study shows that the leaking flow rate is higher near the exit of the impeller than that near the inlet of the impeller. Based on this phenomenon, a new partiallyshrouded impeller is used. The impeller is shrouded near the exit of the impeller. The results show that the flow field near the exit of the impeller is greatly changed by the partially shrouded impeller, and better performance is achievedthan with the unshrouded impeller. The loading distribution on the impeller blade and the flow fields in the impeller is changed by moving the splitter of the impeller in circumferential direction. Moving the splitter slightly to the suction side of the long blade can improve the performance of the compressor. The total enthalpy rise is reduced if only the leading edge of the splitter ismoved to the suction side of the long blade. The performance of the compressor is decreased if the blade is bended from the radius direction at the leading edge of the splitter. The total pressure rise and the enthalpy rise of thecompressor are increased if pinch is used at the diffuser inlet. Among the fivedifferent pinch shape configurations, at design and lower mass flow rates the efficiency of a straight line pinch is the highest, while at higher mass flow rate, the efficiency of a concave pinch is the highest. The sharp corner of the pinch is the main reason for the decrease of efficiency and should be avoided. The variation of the flow angles entering the diffuser in spanwise direction is decreased if pinch is applied. A three-dimensional low solidity twisted vaned diffuser is designed to match the flow angles entering the diffuser. The numerical results show that the pressure recovery in the twisted diffuser is higher than in a conventional low solidity vaned diffuser, which also leads to higher efficiency of the twisted diffuser. Investigation of the detailed flow fields shows that the separation at lower mass flow rate in the twisted diffuser is later than in the conventional low solidity vaned diffuser, which leads to a possible wider flow range of the twisted diffuser.

On Topological Solitons in The Faddeev-Skyrme Model and its Extensions

The topological solitons of two classical field theories, the Faddeev-Skyrme model and the Ginzburg-Landau model are studied numerically and analytically in this work. The aim is to gain information on the existence and properties of these topological solitons, their structure and behaviour under relaxation. First, the conditions and mechanisms leading to the possibility of topological solitons are explored from the field theoretical point of view. This leads one to consider continuous deformations of the solutions of the equations of motion. The results of algebraic topology necessary for the systematic treatment of such deformations are reviewed and methods of determining the homotopy classes of topological solitons are presented. The Faddeev-Skyrme and Ginzburg-Landau models are presented, some earlier results reviewed and the numerical methods used in this work are described. The topological solitons of the Faddeev-Skyrme model, Hopfions, are found to follow the same mechanisms of relaxation in three different domains with three different topological classifications. For two of the domains, the necessary but unusual topological classification is presented. Finite size topological solitons are not found in the Ginzburg-Landau model and a scaling argument is used to suggest that there are indeed none unless a certain modification to the model, due to R. S. Ward, is made. In that case, the Hopfions of the Faddeev-Skyrme model are seen to be present for some parameter values. A boundary in the parameter space separating the region where the Hopfions exist and the area where they do not exist is found and the behaviour of the Hopfion energy on this boundary is studied.

Animal Lovers, Bridge-Builders, and Supervising Watchdogs: Framing and Civil Society Construction by Japanese Pro-Animal Organizations in the Kansai and Tokyo Areas

Unlike their counterparts in Europe and America, the citizen organizations acting for the well-being of animals in Japan have not received scholarly attention. In this research, I explore the activities of twelve Japanese pro-animal organizations in Tokyo and Kansai area from the perspective of social movement and civil society studies. The concept of a ‘pro-animal organization’ is used to refer generally to the collectives promoting animal well-being. By using the collective action frame analysis and the three core framing tasks – diagnostic, prognostic, and motivational – as the primarily analytical tools, I explore the grievances, tactics, motivational means, constructions of agency and identity as well as framing of civil society articulated in the newsletters and the interviews of the twelve organizations I interviewed in Japan in 2010. As the frame construction is always done in relation to the social and political context, I study how the organizations construct their roles as civil society actors in relation to other actors, such as the state, and the idea of citizen activism. The deficiencies in the animal welfare law and lack of knowledge among the public are identified as the main grievances. The primary tactic to overcome these problems was to educate and inform the citizens and authorities, because most organizations lack the channels to influence politically. The audiences were mostly portrayed as either ignorant bystanders or potential adherents. In order to motivate people to join their cause and to enforce the motivation within the organization, the organizations emphasized their uniqueness, proved their efficiency, claimed credit and celebrated even small improvements. The organizations tended to create three different roles for citizen pro-organizations in civil society: reactive, apolitical and emphatic animal lovers concentrating on saving individual animals, proactive, educative bridge-builders seeking to establish equal collaborative relations with authorities, and corrective, supervising watchdogs demanding change in delinquencies offending animal rights. Based on the results of this research, I suggest that by studying how and why the different relations between civil society and the governing actors of the state are constructed, a more versatile approach to citizens’ activism in its context can be achieved.

Fatigue study of the fillet weld waving on weld toe and the penetration in the weld root based on the effective notch stress approach

The fatigue failure of structures under fluctuating loads in fillet weld joints raises a demand to determine the parameters related to this type of loading. In this study, the stress distribution in the susceptible area of weld toe and weld root in fillet welded models analyzed by finite element method applying FEMAP software. To avoid the geometrical singularity on the path of analytical stress analysis in the toe and root area of a weld model the effective notch stress approach applied by which a proper fictitious rounding that mostly depend on the material of structure is applied. The models with different weld toe waving width and radius are analyzed while the flank angle of weld varied in 45 and 30 degrees. The processed results shows that the waving compare to the straight weld toe makes differences in the value of stress and consequently the stress concentration factor between the tip and depth of the waves in the weld toe which helps to protect the crack of propagation and gives enough time and tools to be informed of the crack initiation in the structure during the periodical observation of structure. In the weld root study the analyses among the models with the welding penetration percentage from non-penetration to the full-penetration shows a slightly increase in the root area stress value which comparing with the stiffening effect of penetration conclude that the half-penetration can make an optimization between the stress increase and stiffening effect of deep penetration.

Logistics of North-West Russia and Rail Baltica: Standpoints of Private Sector

The main aims of the present report are to describe the current state of railway transport in Russia, and to gather standpoints of Russian private transportation logistics sector towards the development of new railway connection called Rail Baltica Growth Corridor, connecting North-West Russia with Germany through the Baltic States and Poland. North-West Russia plays important role not only in Russian logistics, but also wider European markets as in container sea ports handling is approx. 2.5 mill. TEU p.a. and handling volume in all terminals is above 190 million tons p.a. The whole transportation logistics sector is shortly described as an operational environment for railways – this is done through technical and economic angles. Transportation development is always going in line with economics of the country, so the analysis on economical development is also presented. Logistics integration of the country is strongly influenced by its engagement in the international trade. Although, raw material handling at sea ports and container transports (imports) are blossoming, domestic transportation market is barely growing (in long-term perspective). Thus, recent entrance of Russia into World Trade Organization (WTO) is analyzed theme in this research, as the WTO is an important regulator of the foreign trade and enabler of volume growth in foreign trade related transportation logistics. However, WTO membership can influence negatively the development of Russia’s own industry and its volumes (these have been uncompetitive in global markets for decades). Data gathering in empirical part was accomplished by semi-structured case study interviews among North-West Russian logistics sector actors (private). These were conducted during years 2012-2013, and research compiles findings out of ten case company interviews. Although, there was no sea port involved in the study, most of the interviewed companies relied in European Logistics within significant parts in short sea shipping and truck combined transportation chains (in Russian part also using railways). As the results of the study, it could be concluded that Rail Baltica is seen as possible transport corridor in most of the interviewed companies, if there is enough cargo available. However, interviewees are a bit sceptical, because major and large-scale infrastructural improvements are needed. Delivery time, frequency and price level are three main factors influencing the attractiveness of Rail Baltica route. Price level is the most important feature, but if RB can offer other advantages such as higher frequency, shorter lead times or more developed set of value-added services, then some flexibility is possible for the price level. Environmental issues are not the main criteria of today, but are recognized and discussed among customers. Great uncertainty exists among respondents e.g. on forthcoming sulphur oxide ban on Baltic Sea shipping (whether or not it is going to be implemented in Russia). Rather surprisingly, transportation routes to Eastern Europe and Mediterranean area are having higher value and price space than those to Germany/Central Europe. Border crossing operations (traction monopoly at rails and customs), gauge widths as well as unclear decision-making processes (in Russia), are named as hindering factors. Performance standards for European connected logistics among Russian logistics sector representatives are less demanding as compared to neighbourhood countries belonging to EU.

Adult education policy in the European Union during the Lisbon decade : the shift to vocational adult learning and work skills matching

This doctoral dissertation investigates the adult education policy of the European Union (EU) in the framework of the Lisbon agenda 2000–2010, with a particular focus on the changes of policy orientation that occurred during this reference decade. The year 2006 can be considered, in fact, a turning point for the EU policy-making in the adult learning sector: a radical shift from a wide--ranging and comprehensive conception of educating adults towards a vocationally oriented understanding of this field and policy area has been observed, in particular in the second half of the so--called ‘Lisbon decade’. In this light, one of the principal objectives of the mainstream policy set by the Lisbon Strategy, that of fostering all forms of participation of adults in lifelong learning paths, appears to have muted its political background and vision in a very short period of time, reflecting an underlying polarisation and progressive transformation of European policy orientations. Hence, by means of content analysis and process tracing, it is shown that the new target of the EU adult education policy, in this framework, has shifted from citizens to workers, and the competence development model, borrowed from the corporate sector, has been established as the reference for the new policy road maps. This study draws on the theory of governance architectures and applies a post-ontological perspective to discuss whether the above trends are intrinsically due to the nature of the Lisbon Strategy, which encompasses education policies, and to what extent supranational actors and phenomena such as globalisation influence the European governance and decision--making. Moreover, it is shown that the way in which the EU is shaping the upgrading of skills and competences of adult learners is modeled around the needs of the ‘knowledge economy’, thus according a great deal of importance to the ‘new skills for new jobs’ and perhaps not enough to life skills in its broader sense which include, for example, social and civic competences: these are actually often promoted but rarely implemented in depth in the EU policy documents. In this framework, it is conveyed how different EU policy areas are intertwined and interrelated with global phenomena, and it is emphasised how far the building of the EU education systems should play a crucial role in the formation of critical thinking, civic competences and skills for a sustainable democratic citizenship, from which a truly cohesive and inclusive society fundamentally depend, and a model of environmental and cosmopolitan adult education is proposed in order to address the challenges of the new millennium. In conclusion, an appraisal of the EU’s public policy, along with some personal thoughts on how progress might be pursued and actualised, is outlined.

Biofuel handling, pretreatment and traffic use in China

This paper describes the development situation of biofuel in China and the research progress and application in transportation and aviation area, including several key technologies of biofuel production: biofuel pretreatment and handling. This paper is aiming to find the best storing, transmitting, feeding and pretreating methods of various materials, as well as a comparison among the advantages and disadvantages of different pretreatment methods, which is expected to reduce cost in production process and reach the maximized benefits. Meanwhile, a case study of one biomass fuel production factory in China is presented with evaluation and analysis on their technology application.

Power and Performance Management Strategies on NoC-Based Multicore Platforms, Using DVFS, Adaptive Algorithm and Task Parallelism

This work presents synopsis of efficient strategies used in power managements for achieving the most economical power and energy consumption in multicore systems, FPGA and NoC Platforms. In this work, a practical approach was taken, in an effort to validate the significance of the proposed Adaptive Power Management Algorithm (APMA), proposed for system developed, for this thesis project. This system comprise arithmetic and logic unit, up and down counters, adder, state machine and multiplexer. The essence of carrying this project firstly, is to develop a system that will be used for this power management project. Secondly, to perform area and power synopsis of the system on these various scalable technology platforms, UMC 90nm nanotechnology 1.2v, UMC 90nm nanotechnology 1.32v and UMC 0.18 μmNanotechnology 1.80v, in order to examine the difference in area and power consumption of the system on the platforms. Thirdly, to explore various strategies that can be used to reducing system’s power consumption and to propose an adaptive power management algorithm that can be used to reduce the power consumption of the system. The strategies introduced in this work comprise Dynamic Voltage Frequency Scaling (DVFS) and task parallelism. After the system development, it was run on FPGA board, basically NoC Platforms and on these various technology platforms UMC 90nm nanotechnology1.2v, UMC 90nm nanotechnology 1.32v and UMC180 nm nanotechnology 1.80v, the system synthesis was successfully accomplished, the simulated result analysis shows that the system meets all functional requirements, the power consumption and the area utilization were recorded and analyzed in chapter 7 of this work. This work extensively reviewed various strategies for managing power consumption which were quantitative research works by many researchers and companies, it's a mixture of study analysis and experimented lab works, it condensed and presents the whole basic concepts of power management strategy from quality technical papers.