Heat Transfer Analysis of the EPR Core Catcher Test Facility Volley

Uusi EPR-reaktorikonsepti on suunniteltu selviytymään tapauksista, joissa reaktorinsydän sulaa ja sula puhkaisee paineastian. Suojarakennuksen sisälle on suunniteltu alue, jolle sula passiivisesti kerätään, pidätetään ja jäähdytetään. Alueelle laaditaan valurautaelementeistä ns.sydänsieppari, joka tulvitetaan vedellä. Sydänsulan tuottama jälkilämpö siirtyyveteen, mistä se poistetaan suojarakennuksen jälkilämmönpoistojärjestelmän kautta. Suuri osa lämmöstä poistuu sydänsulasta sen yläpuolella olevaan veteen, mutta lämmönsiirron tehostamiseksi myös sydänsiepparin alapuolelle on sijoitettu vedellä täytettävät jäähdytyskanavat. Jotta sydänsiepparin toiminta voitaisiin todentaa, on Lappeenrannan Teknillisellä Yliopistolla rakennettu Volley-koelaitteisto tätä tarkoitusta varten. Koelaitteisto koostuu kahdesta täysimittaisesta valuraudasta tehdystä jäähdytyskanavasta. Sydänsulan tuottamaa jälkilämpöä simuloidaan koelaitteistossa sähkövastuksilla. Tässä työssä kuvataan simulaatioiden suorittaminen ja vertaillaan saatuja arvoja mittaustuloksiin. Työ keskittyy sydänsiepparista jäähdytyskanaviin tapahtuvan lämmönsiirron teoriaan jamekanismeihin. Työssä esitetään kolme erilaista korrelaatiota lämmönsiirtokertoimille allaskiehumisen tapauksessa. Nämä korrelaatiot soveltuvat erityisesti tapauksiin, joissa vain muutamia mittausparametreja on tiedossa. Työn toinen osa onVolley 04 -kokeiden simulointi. Ensin käytettyä simulointitapaa on kelpoistettuvertaamalla tuloksia Volley 04 ja 05 -kokeisiin, joissa koetta voitiin jatkaa tasapainotilaan ja joissa jäähdytteen käyttäytyminen jäähdytyskanavassa on tallennettu myös videokameralla. Näiden simulaatioiden tulokset ovat hyvin samanlaisiakuin mittaustulokset. Korkeammilla lämmitystehoilla kokeissa esiintyi vesi-iskuja, jotka rikkoivat videoinnin mahdollistavia ikkunoita. Tämän johdosta osassa Volley 04 -kokeita ikkunat peitettiin metallilevyillä. Joitakin kokeita jouduttiin keskeyttämään laitteiston suurten lämpöjännitysten johdosta. Tällaisten testien simulaatiot eivät ole yksinkertaisia suorittaa. Veden pinnan korkeudesta ei ole visuaalista havaintoa. Myöskään jäähdytteen tasapainotilanlämpötiloista ei ole tarkkaa tietoa, mutta joitakin oletuksia voidaan tehdä samoilla parametreilla tehtyjen Volley 05 -kokeiden perusteella. Mittaustulokset Volley 04 ja 05 -kokeista, jotka on videoitu ja voitu ajaa tasapainotilaan saakka, antoivat simulaatioiden kanssa hyvin samankaltaisia lämpötilojen arvoja. Keskeytettyjen kokeiden ekstrapolointi tasapainotilaan ei onnistunut kovin hyvin. Kokeet jouduttiin keskeyttämään niin paljon ennen termohydraulista tasapainoa, ettei tasapainotilan reunaehtoja voitu ennustaa. Videonauhoituksen puuttuessa ei veden pinnan korkeudesta saatu lisätietoa. Tuloksista voidaan lähinnä esittää arvioita siitä, mitä suuruusluokkaa mittapisteiden lämpötilat tulevat olemaan. Nämä lämpötilat ovat kuitenkin selvästi alle sydänsiepparissa käytettävän valuraudan sulamislämpötilan. Joten simulaatioiden perusteella voidaan sanoa, etteivät jäähdytyskanavien rakenteet sula, mikäli niissä on pienikin jäähdytevirtaus, eikä useampia kuin muutama vierekkäinen kanava ole täysin kuivana.

Development of filter media treatments for liquid filtration

Woven monofilament, multifilament, and spun yarn filter media have long been the standard media in liquid filtration equipment. While the energy for a solid-liquid separation process is determined by the engineering work, it is the interface between the slurry and the equipment - the filter media - that greatly affects the performance characteristics of the unit operation. Those skilled in the art are well aware that a poorly designed filter medium may endanger the whole operation, whereas well-performing filter media can make the operation smooth and economical. As the mineral and pulp producers seek to produce ever finer and more refined fractions of their products, it is becoming increasingly important to be able to dewater slurries with average particle sizes around 1 ¿m using conventional, high-capacity filtration equipment. Furthermore, the surface properties of the media must not allow sticky and adhesive particles to adhere to the media. The aim of this thesis was to test how the dirt-repellency, electrical resistance and highpressure filtration performance of selected woven filter media can be improved by modifying the fabric or yarn with coating, chemical treatment and calendering. The results achieved by chemical surface treatments clearly show that the woven media surface properties can be modified to achieve lower electrical resistance and improved dirt-repellency. The main challenge with the chemical treatments is the abrasion resistance and, while the experimental results indicate that the treatment is sufficiently permanent to resist standard weathering conditions, they may still prove to be inadequately strong in terms of actual use.From the pressure filtration studies in this work, it seems obvious that the conventional woven multifilament fabrics still perform surprisingly well against the coated media in terms of filtrate clarity and cake build-up. Especially in cases where the feed slurry concentration was low and the pressures moderate, the conventional media seemed to outperform the coated media. In the cases where thefeed slurry concentration was high, the tightly woven media performed well against the monofilament reference fabrics, but seemed to do worse than some of the coated media. This result is somewhat surprising in that the high initial specific resistance of the coated media would suggest that the media will blind more easily than the plain woven media. The results indicate, however, that it is actually the woven media that gradually clogs during the coarse of filtration. In conclusion, it seems obvious that there is a pressure limit above which the woven media looses its capacity to keep the solid particles from penetrating the structure. This finding suggests that for extreme pressures the only foreseeable solution is the coated fabrics supported by a strong enough woven fabric to hold thestructure together. Having said that, the high pressure filtration process seems to follow somewhat different laws than the more conventional processes. Based on the results, it may well be that the role of the cloth is most of all to support the cake, and the main performance-determining factor is a long life time. Measuring the pore size distribution with a commercially available porometer gives a fairly accurate picture of the pore size distribution of a fabric, but failsto give insight into which of the pore sizes is the most important in determining the flow through the fabric. Historically air, and sometimes water, permeability measures have been the standard in evaluating media filtration performance including particle retention. Permeability, however, is a function of a multitudeof variables and does not directly allow the estimation of the effective pore size. In this study a new method for estimating the effective pore size and open pore area in a densely woven multifilament fabric was developed. The method combines a simplified equation of the electrical resistance of fabric with the Hagen-Poiseuille flow equation to estimate the effective pore size of a fabric and the total open area of pores. The results are validated by comparison to the measured values of the largest pore size (Bubble point) and the average pore size. The results show good correlation with measured values. However, the measured and estimated values tend to diverge in high weft density fabrics. This phenomenon is thought to be a result of a more tortuous flow path of denser fabrics, and could most probably be cured by using another value for the tortuosity factor.

Test Campaign Parameter Editor for a Graphical TTCN-3 Development Environment

This paper presents the design for a graphical parameter editor for Testing and Test Control Notation 3 (TTCN-3) test suites. This work was done in the context of OpenTTCN IDE, a TTCN-3 development environment built on top of the Eclipse platform. The design presented relies on an additional parameter editing tab added to the launch configurations for test campaigns. This parameter editing tab shows the list of editable parameters and allows opening editing components for the different parameters. Each TTCN-3 primitive type will have a specific editing component providing tools to ease modification of values of that type.

"Dov'è la sinistra?" Hemispatial neglect in stroke

As long as the incidence of stroke continues to grow, patients with large right hemisphere lesions suffering from hemispatial neglect will require neuropsychological evaluation and rehabilitation. The inability to process information especially that coming from the left side accompanied by the magnetic orientation to the ipsilesional side represents a real challenge for rehabilitation. This dissertation is concerned with crucial aspects in the clinical neuropsychological practice of hemispatial neglect. In studying the convergence of the visual and behavioural test batteries in the assessment of neglect, nine of the seventeen patients, who completed both the conventional subtests of the Behavioural Inattention Test and the Catherine Bergego Scale assessments, showed a similar severity of neglect and thus good convergence in both tests. However, patients with neglect and hemianopia had poorer scores in the line bisection test and they displayed stronger neglect in behaviour than patients with pure neglect. The second study examined, whether arm activation, modified from the Constraint Induced Movement Therapy, could be applied as neglect rehabilitation alone without any visual training. Twelve acute- or subacute patients were randomized into two rehabilitation groups: arm activation training or traditional voluntary visual scanning training. Neglect was ameliorated significantly or almost significantly in both training groups due to rehabilitation with the effect being maintained for at least six months. In studying the reflections of hemispatial neglect on visual memory, the associations of severity of neglect and visual memory performances were explored. The performances of acute and subacute patients with hemispatial neglect were compared with the performances of matched healthy control subjects. As hypothesized, encoding from the left side and immediate recall of visual material were significantly compromised in patients with neglect. Another mechanism of neglect affecting visual memory processes is observed in delayed visual reproduction. Delayed recall demands that the individual must make a match helped by a cue or it requires a search for relevant material from long-term memory storage. In the case of representational neglect, the search may succeed but the left side of the recollected memory still fails to open. Visual and auditory evoked potentials were measured in 21 patients with hemispatial neglect. Stimuli coming from the left or right were processed differently in both sensory modalities in acute and subacute patients as compared with the chronic patients. The differences equalized during the course of recovery. Recovery from hemispatial neglect was strongly associated with early rehabilitation and with the severity of neglect. Extinction was common in patients with neglect and it did not ameliorate with the recovery of neglect. The presence of pusher symptom hampered amelioration of visual neglect in acute and subacute stroke patients, whereas depression did not have any significant effect in the early phases after the stroke. However, depression had an unfavourable effect on recovery in the chronic phase. In conclusion, the combination of neglect and hemianopia may explain part of the residual behavioural neglect that is no longer evident in visual testing. Further research is needed in order to determine which specific rehabilitation procedures would be most beneficial in patients suffering the combination of neglect and hemianopia. Arm activation should be included in the rehabilitation programs of neglect; this is a useful technique for patients who need bedside treatment in the acute phase. With respect to the deficit in visual memory in association with neglect, the possible mechanisms of lateralized deficit in delayed recall need to be further examined and clarified. Intensive treatment induced recovery in both severe and moderate visual neglect long after the first two to first three months after the stroke.

Differential Evolution approach and parameter estimation of chaotic

Parameter estimation still remains a challenge in many important applications. There is a need to develop methods that utilize achievements in modern computational systems with growing capabilities. Owing to this fact different kinds of Evolutionary Algorithms are becoming an especially perspective field of research. The main aim of this thesis is to explore theoretical aspects of a specific type of Evolutionary Algorithms class, the Differential Evolution (DE) method, and implement this algorithm as codes capable to solve a large range of problems. Matlab, a numerical computing environment provided by MathWorks inc., has been utilized for this purpose. Our implementation empirically demonstrates the benefits of a stochastic optimizers with respect to deterministic optimizers in case of stochastic and chaotic problems. Furthermore, the advanced features of Differential Evolution are discussed as well as taken into account in the Matlab realization. Test "toycase" examples are presented in order to show advantages and disadvantages caused by additional aspects involved in extensions of the basic algorithm. Another aim of this paper is to apply the DE approach to the parameter estimation problem of the system exhibiting chaotic behavior, where the well-known Lorenz system with specific set of parameter values is taken as an example. Finally, the DE approach for estimation of chaotic dynamics is compared to the Ensemble prediction and parameter estimation system (EPPES) approach which was recently proposed as a possible solution for similar problems.

VVER-440 Thermal Hydraulics as a Computer Code Validation Challenge

This thesis concentrates on the validation of a generic thermal hydraulic computer code TRACE under the challenges of the VVER-440 reactor type. The code capability to model the VVER-440 geometry and thermal hydraulic phenomena specific to this reactor design has been examined and demonstrated acceptable. The main challenge in VVER-440 thermal hydraulics appeared in the modelling of the horizontal steam generator. The major challenge here is not in the code physics or numerics but in the formulation of a representative nodalization structure. Another VVER-440 specialty, the hot leg loop seals, challenges the system codes functionally in general, but proved readily representable. Computer code models have to be validated against experiments to achieve confidence in code models. When new computer code is to be used for nuclear power plant safety analysis, it must first be validated against a large variety of different experiments. The validation process has to cover both the code itself and the code input. Uncertainties of different nature are identified in the different phases of the validation procedure and can even be quantified. This thesis presents a novel approach to the input model validation and uncertainty evaluation in the different stages of the computer code validation procedure. This thesis also demonstrates that in the safety analysis, there are inevitably significant uncertainties that are not statistically quantifiable; they need to be and can be addressed by other, less simplistic means, ultimately relying on the competence of the analysts and the capability of the community to support the experimental verification of analytical assumptions. This method completes essentially the commonly used uncertainty assessment methods, which are usually conducted using only statistical methods.

In search of good relationships to music : understanding aspiration and challenge in developing music school teacher practices

This study focuses on teacher practices in publicly funded music schools in Finland. As views on the aims of music education change and broaden, music schools across Europe share the challenge of developing their activities in response. In public and scholarly debate, there have been calls for increased diversity of contents and concepts of teaching. In Finland, the official national curriculum for state-funded music schools builds on the ideal that teaching and learning should create conditions which promote ‘a good relationship to music’. The meaning of this concept has been deliberately left open in order to leave room for dialogue, flexibility, and teacher autonomy. Since what is meant by ‘good’ is not defined in advance, the notion of ‘improving’ practices is also open to discussion. The purpose of the study is to examine these issues from teachers’ point of view by asking what music school teachers aim to accomplish as they develop their practices. Methodologically, the study introduces a suggestion for building empirical research on Alperson’s ‘robust’ praxial approach to music education, a philosophical theory which is strongly committed to practitioner perspectives and musical diversity. A systematic method for analysing music education practices, interpretive practice analysis, is elaborated with support from interpretive research methods originally used in policy analysis. In addition, the research design shows how reflecting conversations (a collaborative approach well-known in Nordic social work) can be fruitfully applied in interpretive research and combined with teacher inquiry. Data have been generated in a collaborative project involving five experienced music school teachers and the researcher. The empirical material includes transcripts from group conversations, data from teacher inquiry conducted within the project, and transcripts from follow-up interviews. The teachers’ aspirations can be understood as strivings to reinforce the connection between musical practices and various forms of human flourishing such that music and flourishing can sustain each other. Examples from their practices show how the word ‘good’ receives its meaning in context. Central among the teachers’ concerns is their hope that students develop a free and sustainable interest in music, often described as inspiration. I propose that ‘good relationships to music’ and ‘inspiration’ can be understood as philosophical mediators which support the transition from an indeterminate ‘interest in music’ towards specific ways in which music can become a (co-)constitutive part of living well in each person’s particular circumstances. Different musical practices emphasise different aspects of what is considered important in music and in human life. Music school teachers consciously balance between a variety of such values. They also make efforts to resist pressure which might threaten the goods they think are most important. Such goods include joy, participation, perseverance, solid musical skills related to specific practices, and a strong sense of vitality. The insights from this study suggest that when teachers are able to create inspiration, they seem to do so by performing complex work which combines musical and educational aims and makes general positive contributions to their students’ lives. Ensuring that teaching and learning in music schools remain as constructive and meaningful as possible for both students and teachers is a demanding task. The study indicates that collaborative, reflective and interdisciplinary work may be helpful as support for development processes on both individual and collective levels of music school teacher practices.