Active Damping and Energy Recovery in a Hydraulic Boom Controlled by an Electric Drive

The aim of the study is to obtain a mathematical description for an alternative variant of controlling a hydraulic circuit with an electrical drive. The electrical and hydraulic systems are described by basic mathematical equations. The flexibilities of the load and boom is modeled with assumed mode method. The model is achieved and proven with simulations. The controller is constructed and proven to decrease oscillations and improve the dynamic response of the system.

RF disturbances produced by high-power photovoltaic solar plants

In this thesis, analysis of electromagnetic compatibility of high-power photovoltaic solar plant is made. Current standards suitable for photovoltaic applications are given. Measurements of antenna factor for experimental setup are shown. Also, measurements of common mode disturbance voltages in high-power solar plant are given. Importance of DC-side filter is shown. In the last part of the work, electromagnetic simulations are made. These simulations show influence of several factors to EMC of power plant. Based on these simulations and measurements recommendations are given.

AMB system for high-speed motors using automatic commissioning

The general trend towards increasing e ciency and energy density drives the industry to high-speed technologies. Active Magnetic Bearings (AMBs) are one of the technologies that allow contactless support of a rotating body. Theoretically, there are no limitations on the rotational speed. The absence of friction, low maintenance cost, micrometer precision, and programmable sti ness have made AMBs a viable choice for highdemanding applications. Along with the advances in power electronics, such as signi cantly improved reliability and cost, AMB systems have gained a wide adoption in the industry. The AMB system is a complex, open-loop unstable system with multiple inputs and outputs. For normal operation, such a system requires a feedback control. To meet the high demands for performance and robustness, model-based control techniques should be applied. These techniques require an accurate plant model description and uncertainty estimations. The advanced control methods require more e ort at the commissioning stage. In this work, a methodology is developed for an automatic commissioning of a subcritical, rigid gas blower machine. The commissioning process includes open-loop tuning of separate parts such as sensors and actuators. The next step is to apply a system identi cation procedure to obtain a model for the controller synthesis. Finally, a robust model-based controller is synthesized and experimentally evaluated in the full operating range of the system. The commissioning procedure is developed by applying only the system components available and a priori knowledge without any additional hardware. Thus, the work provides an intelligent system with a self-diagnostics feature and an automatic commissioning.

Epäsuoran kysyntätiedon hyödyntäminen verkkokaupan tuotevalikoima- ja hinnoittelupäätöksissä

Tässä diplomityössä tutkitaan, miten verkkokaupan kävijävirran käyttäytymistä analysoimalla voidaan tehdä perusteltuja, tarkoituksenmukaisiin nimikkeisiin ja niiden parametreihin kohdistuvia päätöksiä tilanteessa, jossa laajamittaisemmat historiatiedot toteutuneesta myynnistä puuttuvat. Teoriakatsauksen perusteella muodostettiin ratkaisumalli, joka perustuu potentiaalisten kysyntäajurien muodostamiseen ja testaamiseen. Testisarjan perusteella valittavaa ajuria käytetään estimoimaan nimikkeiden kysyntää, jolloin sitä voidaan käyttää toteutuneen myynnin sijasta esimerkiksi Pareto-analyysissä. Näin huomio on mahdollista keskittää rajattuun määrään merkitykseltään suuria nimikkeitä ja niiden yksityiskohtaisiin parametreihin, joilla on merkitystä asiakkaan ostopäätöstilanteissa. Lisäksi voidaan tunnistaa nimikkeitä, joiden ongelmana on joko huono verkkonäkyvyys tai yhteensopimattomuus asiakastarpeiden kanssa. Ajurien testaamisperiaatteena käytetään kertymäfunktioiden yhdenmukaisuustarkastelua, joka rakentuu kolmesta peräkkäisestä vaiheesta; visuaalisesta tarkastelusta, kahden otoksen 2-suuntaisesta Kolmogorov-Smirnov-yhteensopivuustestistä ja Pearsonin korrelaatiotestistä. Mallia ja sen avulla tuotettua kysynnän ajuria testattiin veneilyalan kuluttaja-asiakkaille suunnatussa verkkokaupassa, jossa sillä tunnistettiin Pareto-jakauman alkupäästä runsaasti nimikkeitä, joiden parametreissa oli myynnin kannalta epäedullisia tekijöitä. Jakauman toisessa päässä tunnistettiin satoja nimikkeitä, joiden ongelmana on ilmeisesti joko huono verkkonäkyvyys tai nimikkeiden yhteensopimattomuus asiakastarpeiden kanssa.

Suitability of LiDAR technology for forest inventory in Russia

LiDAR is an advanced remote sensing technology with many applications, including forest inventory. The most common type is ALS (airborne laser scanning). The method is successfully utilized in many developed markets, where it is replacing traditional forest inventory methods. However, it is innovative for Russian market, where traditional field inventory dominates. ArboLiDAR is a forest inventory solution that engages LiDAR, color infrared imagery, GPS ground control plots and field sample plots, developed by Arbonaut Ltd. This study is an industrial market research for LiDAR technology in Russia focused on customer needs. Russian forestry market is very attractive, because of large growing stock volumes. It underwent drastic changes in 2006, but it is still in transitional stage. There are several types of forest inventory, both with public and private funding. Private forestry enterprises basically need forest inventory in two cases – while making coupe demarcation before timber harvesting and as a part of forest management planning, that is supposed to be done every ten years on the whole leased territory. The study covered 14 companies in total that include private forestry companies with timber harvesting activities, private forest inventory providers, state subordinate companies and forestry software developer. The research strategy is multiple case studies with semi-structured interviews as the main data collection technique. The study focuses on North-West Russia, as it is the most developed Russian region in forestry. The research applies the Voice of the Customer (VOC) concept to elicit customer needs of Russian forestry actors and discovers how these needs are met. It studies forest inventory methods currently applied in Russia and proposes the model of method comparison, based on Multi-criteria decision making (MCDM) approach, mainly on Analytical Hierarchy Process (AHP). Required product attributes are classified in accordance with Kano model. The answer about suitability of LiDAR technology is ambiguous, since many details should be taken into account.