The Child Occupational Self Assessment (COSA, version 2.1) : lasten toimintamahdollisuuksien itsearviointi COSA:n esittely ja suomentamisprosessi

Tämän opinnäytetyön tarkoituksena on aloittaa lapsille ja nuorille suunnatun The Child Occupational Self Assessment (COSA, version 2.1) itsearviointimenetelmän suomenkielisen version käännöstyö. COSA on asiakaslähtöinen itsearviointi, jolla kartoitetaan lasten ja nuorten kokemusta toiminnallisesta pätevyydestään ja jokapäiväisten toimintojen tärkeydestä heille. COSA pohjaa Inhimillisen toiminnan malliin ja sen toteutus seuraa asiakaslähtöistä teoriaa. COSA:n avulla voidaan asettaa toimintaterapialle tavoitteet ja tarkastella niiden toteutumista. Työssämme suomennamme arviointimenetelmän nimen muotoon; Lasten toimintamahdollisuuksien itsearviointi COSA. Arviointimenetelmän käännöstyö tehdään Helsingin ammattikorkeakoulu Stadian toimintaterapian koulutusohjelmalle. Opinnäytetyössä esittelemme ensin arviointia ja tavoitteiden asettamista lasten toimintaterapiassa sekä itsearvioinnin käyttämistä arviointimenetelmänä. Esittelemme COSA itsearviointimenetelmän sekä sen taustalla vaikuttavat Inhimillisen toiminnan mallin sisällön ja asiakaslähtöisyyden. Kartoitamme myös The Child Occupational Self Assessment (COSA, version 2.1 )itsearviointimenetelmän kehittymistä, sitä edeltäneitä arviointimenetelmiä ja COSA:sta aiemmin tehtyjä tutkimuksia. Opinnäytetyössä suomennamme COSA:n arviointilomakkeen. Arviointilomakkeessa on 25 lasten ja nuorten toiminnallista pätevyyttä ja jokapäiväisten toimintojen tärkeyttä kartoittava väittämää. Suomentamisprosessissa selvitämme COSA:n arviointilomakkeen väittämien suomennosten ymmärrettävyyden onnistumista kahdeksan käyttökokeiluun ja haastatteluun osallistuvan lapsen avulla. Saimme arviointilomakkeen suomentamisprosessiin apua neljältä lasten kanssa työskentelevältä toimintaterapeutilta sekä koulutusohjelmamme koulutuspäälliköltä. Käyttökokeiluiden sekä toimintaterapeuttien palautteiden avulla viimeistelimme suomennetun arviointilomakkeen väittämät. Opinnäytetyön lopuksi pohdimme arviointilomakkeen suomentamisprosessin vaiheita sekä mahdollisia jatkotutkimusehdotuksia. Luovutimme Lasten toimintamahdollisuuksien itsearviointi COSA:n arviointilomakkeen koulutusohjelmamme käyttöön ja mahdollisten jatkotutkimusten kohteeksi.

Predicting diffusion of innovations with self-organisation and machine learning

The main subject of this master's thesis was predicting diffusion of innovations. The prediction was done in a special case: product has been available in some countries, and based on its diffusion in those countries the prediction is done for other countries. The prediction was based on finding similar countries with Self-Organizing Map~(SOM), using parameters of countries. Parameters included various economical and social key figures. SOM was optimised for different products using two different methods: (a) by adding diffusion information of products to the country parameters, and (b) by weighting the country parameters based on their importance for the diffusion of different products. A novel method using Differential Evolution (DE) was developed to solve the latter, highly non-linear optimisation problem. Results were fairly good. The prediction method seems to be on a solid theoretical foundation. The results based on country data were good. Instead, optimisation for different products did not generally offer clear benefit, but in some cases the improvement was clearly noticeable. The weights found for the parameters of the countries with the developed SOM optimisation method were interesting, and most of them could be explained by properties of the products.

Antennimittausjärjestelmän toteutus ja ominaisuuksien määrittäminen

Diplomityössä tarkasteltiin antennien säteilykuviomittauksiin käytettävien antennimittaratojen ominaisuuksia. Sovelletun elektroniikan laboratorion antennimittaradasta kehitettiin toimiva säteilykuvion mittausjärjestelmä, johon kuuluvat radiokaiuton kammio, suuntauskoneisto ja antennikannakkeet, HP 8720D -piirianalysaattori ja RF-kaapelointi sekä valmistutetut mitta-antennitorvet. Työssä vertailtiin koaksiaalikaapeleita ja valittiin antennimittaukseen soveltuvat. 1,70–2,60 GHz:n taajuusalueen mittastandardiksi suunniteltiin torviantenni, jonka kaksi prototyyppiä valmistutettiin konetekniikan osastolla. Torviantennien ominaisuudet mitattiin. Antennimittaradan ominaisuudet ja soveltuvuus erilaisiin antennimittauksiin selvitettiin sekä teoreettisesti että mittauksin.

Fourier self-deconvolution in coherent anti-Stokes Raman scattering spectrum analysis

Coherent anti-Stokes Raman scattering (CARS) microscopy is rapidly developing into a unique microscopic tool in biophysics, biology and the material sciences. The nonlinear nature of CARS spectroscopy complicates the analysis of the received spectra. There were developed mathematical methods for signal processing and for calculations spectra. Fourier self-deconvolution is a special high pass FFT filter which synthetically narrows the effective trace bandwidth features. As Fourier self-deconvolution can effectively reduce the noise, which may be at a higher spatial frequency than the peaks, without losing peak resolution. The idea of the work is to experiment the possibility of using wavelet decomposition in spectroscopic for background and noise removal, and Fourier transformation for linenarrowing.

Salient Pole Synchronous Machine Modelling in an Industrial Direct Torque Controlled Drive Application

Synchronous motors are used mainly in large drives, for example in ship propulsion systems and in steel factories' rolling mills because of their high efficiency, high overload capacity and good performance in the field weakening range. This, however, requires an extremely good torque control system. A fast torque response and a torque accuracy are basic requirements for such a drive. For large power, high dynamic performance drives the commonly known principle of field oriented vector control has been used solely hitherto, but nowadays it is not the only way to implement such a drive. A new control method Direct Torque Control (DTC) has also emerged. The performance of such a high quality torque control as DTC in dynamically demanding industrial applications is mainly based on the accurate estimate of the various flux linkages' space vectors. Nowadays industrial motor control systems are real time applications with restricted calculation capacity. At the same time the control system requires a simple, fast calculable and reasonably accurate motor model. In this work a method to handle these problems in a Direct Torque Controlled (DTC) salient pole synchronous motor drive is proposed. A motor model which combines the induction law based "voltage model" and motor inductance parameters based "current model" is presented. The voltage model operates as a main model and is calculated at a very fast sampling rate (for example 40 kHz). The stator flux linkage calculated via integration from the stator voltages is corrected using the stator flux linkage computed from the current model. The current model acts as a supervisor that prevents only the motor stator flux linkage from drifting erroneous during longer time intervals. At very low speeds the role of the current model is emphasised but, nevertheless, the voltage model always stays the main model. At higher speeds the function of the current model correction is to act as a stabiliser of the control system. The current model contains a set of inductance parameters which must be known. The validation of the current model in steady state is not self evident. It depends on the accuracy of the saturated value of the inductances. Parameter measurement of the motor model where the supply inverter is used as a measurement signal generator is presented. This so called identification run can be performed prior to delivery or during drive commissioning. A derivation method for the inductance models used for the representation of the saturation effects is proposed. The performance of the electrically excited synchronous motor supplied with the DTC inverter is proven with experimental results. It is shown that it is possible to obtain a good static accuracy of the DTC's torque controller for an electrically excited synchronous motor. The dynamic response is fast and a new operation point is achieved without oscillation. The operation is stable throughout the speed range. The modelling of the magnetising inductance saturation is essential and cross saturation has to be considered as well. The effect of cross saturation is very significant. A DTC inverter can be used as a measuring equipment and the parameters needed for the motor model can be defined by the inverter itself. The main advantage is that the parameters defined are measured in similar magnetic operation conditions and no disagreement between the parameters will exist. The inductance models generated are adequate to meet the requirements of dynamically demanding drives.

Mechanistic population Models in Biology: Model Derivation and Application

In general, models of ecological systems can be broadly categorized as ’top-down’ or ’bottom-up’ models, based on the hierarchical level that the model processes are formulated on. The structure of a top-down, also known as phenomenological, population model can be interpreted in terms of population characteristics, but it typically lacks an interpretation on a more basic level. In contrast, bottom-up, also known as mechanistic, population models are derived from assumptions and processes on a more basic level, which allows interpretation of the model parameters in terms of individual behavior. Both approaches, phenomenological and mechanistic modelling, can have their advantages and disadvantages in different situations. However, mechanistically derived models might be better at capturing the properties of the system at hand, and thus give more accurate predictions. In particular, when models are used for evolutionary studies, mechanistic models are more appropriate, since natural selection takes place on the individual level, and in mechanistic models the direct connection between model parameters and individual properties has already been established. The purpose of this thesis is twofold. Firstly, a systematical way to derive mechanistic discrete-time population models is presented. The derivation is based on combining explicitly modelled, continuous processes on the individual level within a reproductive period with a discrete-time maturation process between reproductive periods. Secondly, as an example of how evolutionary studies can be carried out in mechanistic models, the evolution of the timing of reproduction is investigated. Thus, these two lines of research, derivation of mechanistic population models and evolutionary studies, are complementary to each other.

Patient education to support self-management of patients with mental illness

This study explores areas which need to be improved to develop the quality of patient education to support self-management of patients with mental illness in psychiatric hospitals. The study was conducted in five phases during the period 2000 – 2007. First, patients‘ (n = 313) satisfaction with patient education were investigated. Second, patients' (n = 51) experiences of patient education were explored. Third, a national survey was conducted to investigate realisation of patient education from the staff (n = 55) viewpoint. Fourth, outcomes of patient education were investigated by evaluating the impacts of different patient education methods on patients‘ (n = 311) attitudes towards medication, knowledge level and importance of information. Fifth, patients‘ (n = 16) perceptions of different patient education methods were explored. Patients reported poor satisfaction with patient education (Phase I), and they have considerable need to receive information during their hospital stay (Phase II). Described by staff, the content of patient education covered almost all informational areas investigated. However, discrepancies related to the realisation of patient education were found. (Phase III.) Evaluation of different patient education methods indicate that patients derived benefits from structured patient education with supportive methods (Phase IV) and patients also perceived that these methods supported their information receiving (Phase V). In order to improve the quality of patient education to support self-management of patients with mental illness patient education should be systematically and individually provided to all patients by using different educational methods. Realisation of this should be ensured by providing written instructions, improving nurses‘ knowledge and skills as well ensuring operating conditions.

Speaking Wounds – Silence, Self-injury and Healing in Patricia McCormick‟s Cut

Pro gradu -tutkielmani käsittelee itsensä vahingoittamisen, hiljaisuuden ja toipumisen representaatioita Patricia McCormickin nuorille aikuisille suunnatussa teoksessa Cut. Tutkielman tarkoituksena on analysoida itsensä vahingoittamista kirjallisuudentutkimuksellisesta näkökulmasta. Vaikka itsensä vahingoittamisesta on englanninkielisillä markkinoilla olemassa runsaasti psykologista kirjallisuutta, ei sen representaatioita kirjallisuudessa ole vielä juurikaan tutkittu. Näiden representaatioiden analysointi on tärkeää, sillä 1990-luvun alkupuolella syntyi nuortenkirjallisuudessa genre, joka keskittyy juuri itsensä vahingoittamisen käsittelyyn. Patricia McCormickin Cut on edustava esimerkki tämän genren romaanista. Tutkimuksen teoreettinen viitekehys koostuu monitieteellisistä teksteistä. Ensisijaisina lähteinä ovat Patrick Fueryn teoreettiset käsitykset hiljaisuudesta ja poissa-olosta sekä Christine Wilkie-Stibbsin feministiset luennat yksittäisistä nuortenkirjoista. Armando R. Favazzan kliiniset määritelmät itsensä vahingoittamisesta luovat perustan käyttämilleni termeille. Pääpaino tutkielmassa on kuitenkin omalla luennallani romaanista. Tutkimustuloksena on, että sekä päähenkilön hiljaisuus että itsensä viiltely ovat monimerkityksisiä ja dynaamisia tiloja. Ne toimivat kommunikaation ja itsehoidon välineinä. Viiltelyyn sisältyy voimakkaasti hoivan käsite, sillä viiltämällä itseään päähenkilö yrittää käsitellä ja helpottaa henkistä ahdistustaan. Sekä hiljaisuus että viiltely auttavat eri tavoin päähenkilöä käsittelemään ja sisäistämään oman tilansa ja näin ollen myös edistävät paranemisprosessia, joka jatkuu puheen kautta perinteisessä psykoterapeuttisessa diskurssissa. Teos painottaa puheen roolia, mutta myös hiljaisuus ja viiltely muodostavat yhtäläiset kommunikaatio- ja hoitoväylät.