Identification of Research Portfolio for the Development of Filtration Equipment

This piece of work which is Identification of Research Portfolio for Development of Filtration Equipment aims at presenting a novel approach to identify promising research topics in the field of design and development of filtration equipment and processes. The projected approach consists of identifying technological problems often encountered in filtration processes. The sources of information for the problem retrieval were patent documents and scientific papers that discussed filtration equipments and processes. The problem identification method adopted in this work focussed on the semantic nature of a sentence in order to generate series of subject-action-object structures. This was achieved with software called Knowledgist. List of problems often encountered in filtration processes that have been mentioned in patent documents and scientific papers were generated. These problems were carefully studied and categorized. Suggestions were made on the various classes of these problems that need further investigation in order to propose a research portfolio. The uses and importance of other methods of information retrieval were also highlighted in this work.

On the Condition Monitoring of Induction machines

The research of condition monitoring of electric motors has been wide for several decades. The research and development at universities and in industry has provided means for the predictive condition monitoring. Many different devices and systems are developed and are widely used in industry, transportation and in civil engineering. In addition, many methods are developed and reported in scientific arenas in order to improve existing methods for the automatic analysis of faults. The methods, however, are not widely used as a part of condition monitoring systems. The main reasons are, firstly, that many methods are presented in scientific papers but their performance in different conditions is not evaluated, secondly, the methods include parameters that are so case specific that the implementation of a systemusing such methods would be far from straightforward. In this thesis, some of these methods are evaluated theoretically and tested with simulations and with a drive in a laboratory. A new automatic analysis method for the bearing fault detection is introduced. In the first part of this work the generation of the bearing fault originating signal is explained and its influence into the stator current is concerned with qualitative and quantitative estimation. The verification of the feasibility of the stator current measurement as a bearing fault indicatoris experimentally tested with the running 15 kW induction motor. The second part of this work concentrates on the bearing fault analysis using the vibration measurement signal. The performance of the micromachined silicon accelerometer chip in conjunction with the envelope spectrum analysis of the cyclic bearing faultis experimentally tested. Furthermore, different methods for the creation of feature extractors for the bearing fault classification are researched and an automatic fault classifier using multivariate statistical discrimination and fuzzy logic is introduced. It is often important that the on-line condition monitoring system is integrated with the industrial communications infrastructure. Two types of a sensor solutions are tested in the thesis: the first one is a sensor withcalculation capacity for example for the production of the envelope spectra; the other one can collect the measurement data in memory and another device can read the data via field bus. The data communications requirements highly depend onthe type of the sensor solution selected. If the data is already analysed in the sensor the data communications are needed only for the results but in the other case, all measurement data need to be transferred. The complexity of the classification method can be great if the data is analysed at the management level computer, but if the analysis is made in sensor itself, the analyses must be simple due to the restricted calculation and memory capacity.

Varastonhallinnan välineet raaka-ainehankintojen apuna

Tarkoituksena on löytää tutkimuksen kohdeyritykselle toimintatapa raaka- ainehankinnoissa varastoon sitoutuneen pääoman minimoimiseksi tarkastelemalla varastoinnin tunnuslukuja ja syventääyrityksen näkemystä varaston hallinnan laskennallisista työkaluista. Tutkimus on suhtautumiseltaan kartoittava kvalitatiivinen tutkimus, jokaon metodologialtaan case-tutkimus. Teoriaosa on kirjoitettu perustuen aihetta käsitteleviin teoksiin sekä artikkeleihin ja empiriaosaan aineistoa on hankittu teema- ja avointen haastattelujen avulla. Hankinnan ollessa osa yrityksen tärkeimpiä toimintoja tulee kiinnittää huomiota erityisesti pääoman sitoutuneisuuteen. Transaktiomotiivien kauttahankinnan tasot hahmottuvat paremmin päätöksentekijöille. Täsmällisen päästrategiaa tukevan hankintastrategian luominen on ensisijaisen tärkeää, jotta varastonhallinnan osana laskettavia tunnuslukuja voidaan hyödyntää oikealla tavalla voiton maksimoimiseksi ja riittävän palvelutasonylläpitämiseksi. Palvelutason määrittelemiseksi hankintastrategiaa on terävöitettävä, koska maksimaalisen palvelutason ylläpitäminen on tehotonta.

Kustannusrakenteen simulointi ja optimointi

Primääripakatun tuotteen liiketoiminnallisen arvoketjun kustannusrakenteen tunnistaminen tuo merkittävää lisäarvoa pakkausliiketoiminnan suunnittelua koskevaan päätöksentekoon. Tämän konstruktiivisen tutkimuksen tavoitteena on rakentaa pakkaustuotannon liiketoiminnallisen arvoketjun simulointimalli, jonka avulla voidaan analysoida pakkaustuotannon arvoketjun kustannusrakennetta lähtien pakkausraaka-aineen valmistuksesta ja päättyen kaupan vähittäismyyntiin. Käytettävä tutkimusaineisto koostuu jonoteoriaan ja tuotannonsuunnitteluun liittyvästä kirjallisuudesta, tieteellisistä artikkeleista sekä asiantuntijalausunnoista. Tutkimuksen yhteydessä rakennetun simulointimallin avulla määritettiin erään primääripakatun tuotteen konvertointivaiheen optimaalinen valmistuseräkoko ja liiketoiminnallisen arvoketjun kustannusrakenne. Arvoketjuanalyysissä primääripakatun tuotteen kustannustekijöiksi määritettiin pakkausmateriaali, pakkausvalmistus, pakattava tuote, pakkauksen täyttö ja suljenta sekä pakatun tuotteen jakelulogistiikka ja vähittäismyynti. Arvoketjuanalyysin johtopäätöksenä voidaan todeta, että primääripakatulle esimerkkituotteelle kohdistuvista kustannuksista noin 97 % on brand ownerin ja vähittäismyynnin aiheuttamia ja noin 3 % varsinaisesta tuotteen pakkaamisesta aiheutuvia.

Trustworthy context dependency in ubiquitous systems

The modern society is getting increasingly dependent on software applications. These run on processors, use memory and account for controlling functionalities that are often taken for granted. Typically, applications adjust the functionality in response to a certain context that is provided or derived from the informal environment with various qualities. To rigorously model the dependence of an application on a context, the details of the context are abstracted and the environment is assumed stable and fixed. However, in a context-aware ubiquitous computing environment populated by autonomous agents, a context and its quality parameters may change at any time. This raises the need to derive the current context and its qualities at runtime. It also implies that a context is never certain and may be subjective, issues captured by the context’s quality parameter of experience-based trustworthiness. Given this, the research question of this thesis is: In what logical topology and by what means may context provided by autonomous agents be derived and formally modelled to serve the context-awareness requirements of an application? This research question also stipulates that the context derivation needs to incorporate the quality of the context. In this thesis, we focus on the quality of context parameter of trustworthiness based on experiences having a level of certainty and referral experiences, thus making trustworthiness reputation based. Hence, in this thesis we seek a basis on which to reason and analyse the inherently inaccurate context derived by autonomous agents populating a ubiquitous computing environment in order to formally model context-awareness. More specifically, the contribution of this thesis is threefold: (i) we propose a logical topology of context derivation and a method of calculating its trustworthiness, (ii) we provide a general model for storing experiences and (iii) we formalise the dependence between the logical topology of context derivation and its experience-based trustworthiness. These contributions enable abstraction of a context and its quality parameters to a Boolean decision at runtime that may be formally reasoned with. We employ the Action Systems framework for modelling this. The thesis is a compendium of the author’s scientific papers, which are republished in Part II. Part I introduces the field of research by providing the mending elements for the thesis to be a coherent introduction for addressing the research question. In Part I we also review a significant body of related literature in order to better illustrate our contributions to the research field.

Pankkien vakavaraisuussääntelyn vaikutus startup-yritysten rahoitukseen

Tutkielman tavoitteena on määrittää, miten pankkien vakavaraisuussääntelyn muuttuminen on vaikuttanut startup-yritysten lainan hintaan ja ehtoihin, sekä tarkastella startup-yritysten muiden rahoitusmahdollisuuksien kehittymistä. Startup-yritysten eri rahoituslähteiden kasvu kootaan lähteiden vuositilastoista. Pankkien vakavaraisuussääntelyä tarkastellaan vertailemalla lainsäädännön tilaa eri vuosina. Sääntelyn vaikutuksia arvioidaan suorittamalla laskuesimerkkejä tietynlaisten pankkien ja startup-yritysten tilanteessa. Lähtöarvot kootaan lainsäädännöstä, tilastoista, tieteellisistä julkaisuista tai asiantuntijahaastattelujen pohjalta. Startup-yritysten luottoluokitukset määritetään käyttämällä Suomen Asiakastieto Oy:n luokitusmallia. Tuloksena tutkielma luo kattavan kuvan pankkien vakavaraisuussääntelyn kehittymisestä ja startup-yritysten rahoituslähteistä. Pankkisektorin ulkopuolinen rahoitus startupeille on kasvanut 2,5 %:n vuosivauhtia vuodesta 2008, josta vertaislainat ovat olleet suuressa roolissa. Lähes 72 % pankkien vähittäislainojen markkinoista on siirtynyt sisäisten luokitusten menetelmään vastuiden riskipainojen laskennassa. Siirtymä uuteen menetelmään aiheuttaa korkopaineita viidesosalle startupeista. 58 %:lle startupeista muutos ei ole ongelma. 42 % startupeista ei voi pienentää potentiaalisen lainan korkoaan edes lainan kokoisella vakuudella. Pääomavaatimusten kasvu ja pankkien siirtyminen uusiin laskentamenetelmiin voi nostaa startup-yrityksen lainan korkoa jopa 15 %.

Targeted Annotation of Scientific Literature and Data Resources in Invenio Digital Libraries

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Self-deposit, discovery, and delivery of scientific GIS datasets using GeoHydra

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Myynnin raportoinnin käytettävyyden parantaminen toiminnanohjausjärjestelmämuutoksen jälkeen, Case: Stora Enso Publication Papers Oy Ltd

Tutkielman tavoitteena oli parantaa kohdeyrityksen myynnin raportoinnin käytettävyyttä toiminnanohjausjärjestelmämuutoksen jälkeen. Järjestelmämuutoksen jälkeen myyntitiedot siirtyivät puutteellisesti yrityksen tuloslaskentajärjestelmään. Tutkimus on empiriaan nojautuva tapaustutkimus. Siinätarkastellaan myynnin raportoinnin merkitystä yrityksen taloushallinnon raportoinnin osana sekä keinoja raportoinnin käytettävyyden varmistamiseksi. Lisäksi työssä käsitellään tietojärjestelmien osuutta taloushallinnon raportoinnissa ja tarkastellaan kohdeyrityksen tietojärjestelmiä ja niiden yhteistoimintaa. Empiirisen tutkimuksen tuloksena myyntitietojen puutteellisen siirtymisen syyksi havaittiin virheellinen poimintamääritys järjestelmien välillä.

Assessing the technical competitiveness of printing papers

This dissertation studies the technical quality assessment of a printing paper. The theoretical framework basis on the customer value hierarchy concept and the product integrity concept. The experimental part of the research was divided into two phases: Interviews of the publishers and the printers and the testing of the technical quality of selected consumer magazines and a set of selected white paper samples. The revenue coming from the advertising and the revenue coming from the copy sales arethe most important factors of efficiency of the publisher. They form the highest level in the customer value hierarchy of the publisher. A printed product is profiled according to the target group and product segment. There is no absolute level of good printed quality. It can be studied only in context of the requirements set on the printed product. Publishers quality expectations are basic elements of external product integrity. The most important elements of efficiency of the printer can be summarised to reaching high production efficiency in order toattain good profitability and competitive delivery times. Printers' factors of efficiency base on the customers expectations on the consequences in use situation in the customer value hierarchy. They form the basis of internal productintegrity. The use of purely technical testing to classify printed products according to the customers' expectations proved to be only indicative at its best. The information gathered from the interviews was documented and sorted withthe help of the QFD-technique. The technical quality of two different coated paper grades were assessed based on the customer expectations and based on the best achievable quality. When customer requirements are used for the basis of assessing the technical quality of printing papers the order from best to worst is different than when comparing the papers just based on the best achievable quality.

IN DUBIO PRO NATURA? A Philosophical Analysis of the Precautionary Principle in Environmental and Health Risk Governance

In this book, I apply a philosophical approach to study the precautionary principle in environmental (and health) risk decision-making. The principle says that unacceptable environmental and health risks should be anticipated, and they ought to be forestalled before the damage comes to fruition even if scientific understanding of the risks is inadequate. The study consists of introductory chapters, summary and seven original publications which aim at explicating the principle, critically analysing the debate on the principle, and constructing a basis for the well-founded use of the principle. Papers I-V present the main thesis of this research. In the two last papers, the discussion is widened to new directions. The starting question is how well the currently embraced precautionary principle stands up to critical philosophical scrutiny. The approach employed is analytical: mainly conceptual, argumentative and ethical. The study draws upon Anglo-American style philosophy on the one hand, and upon sources of law as well as concrete cases and decision-making practices at the European Union level and in its member countries on the other. The framework is environmental (and health) risk governance, including the related law and policy. The main thesis of this study is that the debate on the precautionary principle needs to be shifted from the question of whether the principle (or its weak or strong interpretation) is well-grounded in general to questions about the theoretical plausibility and ethical and socio-political justifiability of specific understandings of the principle. The real picture of the precautionary principle is more complex than that found (i.e. presumed) in much of the current academic, political and public debate surrounding it. While certain presumptions and interpretations of the principle are found to be sound, others are theoretically flawed or include serious practical problems. The analysis discloses conceptual and ethical presumptions and elementary understandings of the precautionary principle, critically assesses current practices invoked in the name of the precautionary principle and public participation, and seeks to build bridges between precaution, engagement and philosophical ethics. Hence, it is intended to provide a sound basis upon which subsequent academic scrutiny can build.

A Dependency Parsing Approach to Biomedical Text Mining

Biomedical research is currently facing a new type of challenge: an excess of information, both in terms of raw data from experiments and in the number of scientific publications describing their results. Mirroring the focus on data mining techniques to address the issues of structured data, there has recently been great interest in the development and application of text mining techniques to make more effective use of the knowledge contained in biomedical scientific publications, accessible only in the form of natural human language. This thesis describes research done in the broader scope of projects aiming to develop methods, tools and techniques for text mining tasks in general and for the biomedical domain in particular. The work described here involves more specifically the goal of extracting information from statements concerning relations of biomedical entities, such as protein-protein interactions. The approach taken is one using full parsing—syntactic analysis of the entire structure of sentences—and machine learning, aiming to develop reliable methods that can further be generalized to apply also to other domains. The five papers at the core of this thesis describe research on a number of distinct but related topics in text mining. In the first of these studies, we assessed the applicability of two popular general English parsers to biomedical text mining and, finding their performance limited, identified several specific challenges to accurate parsing of domain text. In a follow-up study focusing on parsing issues related to specialized domain terminology, we evaluated three lexical adaptation methods. We found that the accurate resolution of unknown words can considerably improve parsing performance and introduced a domain-adapted parser that reduced the error rate of theoriginal by 10% while also roughly halving parsing time. To establish the relative merits of parsers that differ in the applied formalisms and the representation given to their syntactic analyses, we have also developed evaluation methodology, considering different approaches to establishing comparable dependency-based evaluation results. We introduced a methodology for creating highly accurate conversions between different parse representations, demonstrating the feasibility of unification of idiverse syntactic schemes under a shared, application-oriented representation. In addition to allowing formalism-neutral evaluation, we argue that such unification can also increase the value of parsers for domain text mining. As a further step in this direction, we analysed the characteristics of publicly available biomedical corpora annotated for protein-protein interactions and created tools for converting them into a shared form, thus contributing also to the unification of text mining resources. The introduced unified corpora allowed us to perform a task-oriented comparative evaluation of biomedical text mining corpora. This evaluation established clear limits on the comparability of results for text mining methods evaluated on different resources, prompting further efforts toward standardization. To support this and other research, we have also designed and annotated BioInfer, the first domain corpus of its size combining annotation of syntax and biomedical entities with a detailed annotation of their relationships. The corpus represents a major design and development effort of the research group, with manual annotation that identifies over 6000 entities, 2500 relationships and 28,000 syntactic dependencies in 1100 sentences. In addition to combining these key annotations for a single set of sentences, BioInfer was also the first domain resource to introduce a representation of entity relations that is supported by ontologies and able to capture complex, structured relationships. Part I of this thesis presents a summary of this research in the broader context of a text mining system, and Part II contains reprints of the five included publications.

Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

Role of references in international industrial marketing : a theory-building case study about supplier’s processes of utilizing references

Scientific studies regarding specifically references do not seem to exist. However, the utilization of references is an important practice for many companies involved in industrial marketing. The purpose of the study is to increase the understanding about the utilization of references in international industrial marketing in order to contribute to the development of a theory of reference behavior. Specifically, the modes of reference usage in industry, the factors affecting a supplier's reference behavior, and the question how references are actually utilized, are explored in the study. Due to the explorative nature of the study, a research design was followed where theory and empirical studies alternated. An Exploratory Framework was developed to guide a pilot case study that resulted in Framework 1. Results of the pilot study guided an expanded literature review that was used to develop first a Structural Framework and a Process Framework which were combined in Framework 2. Then, the second empirical phase of the case study was conducted in the same (pilot) case company. In this phase, Decision Systems Analysis (DSA) was used as the analysis method. The DSA procedure consists of three interviewing waves: initial interviews, reinterviews, and validating interviews. Four reference decision processes were identified, described and analyzed in the form of flowchart descriptions. The flowchart descriptions were used to explore new constructs and to develop new propositions to develop Framework 2 further. The quality of the study was ascertained by many actions in both empirical parts of the study. The construct validity of the study was ascertained by using multiple sources of evidence and by asking the key informant to review the pilot case report. The DSA method itself includes procedures assuring validity. Because of the choice to conduct a single case study, external validity was not even pursued. High reliability was pursued through detailed documentation and thorough reporting of evidence. It was concluded that the core of the concept of reference is a customer relationship regardless of the concrete forms a reference might take in its utilization. Depending on various contingencies, references might have various tasks inside the four roles of increasing 1) efficiency of sales and sales management, 2) efficiency of the business, 3) effectiveness of marketing activities, and 4) effectiveness in establishing, maintaining and enhancing customer relationships. Thus, references have not only external but internal tasks as well. A supplier's reference behavior might be affected by many hierarchical conditions. Additionally, the empirical study showed that the supplier can utilize its references as a continuous, all pervasive decision making process through various practices. The process includes both individual and unstructured decision making subprocesses. The proposed concept of reference can be used to guide a reference policy recommendable for companies for which the utilization of references is important. The significance of the study is threefold: proposing the concept of reference, developing a framework of a supplier's reference behavior and its short term process of utilizing references, and conceptual structuring of an unstructured and in industrial marketing important phenomenon to four roles.