Chemistry of potassium halides and their role in corrosion in biomass and waste firing

Compared to the use of traditional fossil fuels (coal, oil, natural gas), combustion of biomass and waste fuels has several environmental and economic advantages for heat and power generation. However, biomass and waste fuels might contain halogens (Cl, Br, F), alkali metals (Na, K) and heavy metals (Zn, Pb), which may cause harmful emissions and corrosion problems. Hightemperature corrosion occurs typically on furnace waterwalls and superheaters. The corrosion of the boiler tube materials limits the increase of thermal efficiency of steam boilers and leads to costly shutdowns and repairs. In recent years, some concerns have been raised about halogen (Cl, Br, and F)-related hightemperature corrosion in biomass- and waste-fired boilers. Chlorine-related high-temperature corrosion has been studied extensively. The presence of alkali chlorides in the deposits is believed to play a major role in the corrosion observed in biomass and waste fired boilers. However, there is much less information found in literature on the corrosion effect of bromine and fluorine. According to the literature, bromine is only assumed to play a role similar to chlorine; the role of fluorine is even less understood. In this work, a series of bubbling fluidized bed (BFB) bench-scale tests were carried out to characterize the formation and sulfation behaviors of KCl and KBr in BFB combustion conditions. Furthermore, a series of laboratory tests were carried out to investigate the hightemperature corrosion behaviors of three different superheater steels (10CrMo9-10, AISI 347 and Sanicro 28) exposed to potassium halides in ambient air and wet air (containing 30% H2O). The influence of H2O and O2 on the high-temperature corrosion of steels both with and without a salt (KCl) in three gas atmospheres (2% H2O-30% O2-N2, 2% H2O-2% O2-N2 and 30% H2O-2% O2-N2) was also studied. From the bench-scale BFB combustion tests, it was found that HBr has a clearly higher affinity for the available K forming KBr than HCl forming KCl. The tests also indicated that KCl has a higher tendency for sulfation than KBr. From the laboratory corrosion tests in ambient air (also called “dry air” in Paper III and Paper IV), it was found that at relatively low temperatures (≤ 550 °C) the corrosivity of KBr and KF are similar to KCl. At 600 °C, KF showed much stronger corrosivity than KBr and KCl, especially for 10CrMo9-10 and AISI 347. When exposed to KBr or KF, 10CrMo9-10 was durable at least up to 450 °C, while AISI 347 and Sanicro 28 were durable at least up to 550 °C. From the laboratory corrosion tests in wet air (30% H2O), no obvious effect of water vapor was detected at 450 °C. At 550 °C, the influence of water vapor became significant in some cases, but the trend was not consistent. At 550 °C, after exposure with KBr, 10CrMo9-10 suffered from extreme corrosion; after exposure with KF and KCl, the corrosion was less severe, but still high. At 550 °C, local deep pitting corrosion occurred on AISI 347 and Sanicro 28 after exposure with KF. Some formation of K2CrO4 was observed in the oxide layer. At 550 °C, AISI 347 and Sanicro 28 suffered from low corrosion (oxide layer thickness of < 10 μm) after exposure with KBr and KCl. No formation of K2CrO4 was observed. Internal oxidation occurred in the cases of AISI 347 with KBr and KCl. From the laboratory corrosion tests in three different gas atmospheres (2% H2O-30% O2-N2, 2% H2O-2% O2-N2 and 30% H2O-2% O2-N2), it was found that in tests with no salt, no corrosion occurred on AISI 347 and Sanicro 28 up to 600 °C in both the “O2-rich” (2% H2O-30% O2-N2) and “H2O-rich” (30% H2O-2% O2-N2) gas atmospheres; only 10CrMo9-10 showed increased corrosion with increasing temperature. For 10CrMo9-10 in the “O2-rich” atmosphere, the presence of KCl significantly increased the corrosion compared to the “no salt” cases. For 10CrMo9-10 in the “H2O-rich” atmosphere, the presence or absence of KCl did not show any big influence on corrosion. The formation of K2CrO4 was observed only in the case with the “O2-rich” atmosphere. Considering both the results from the BFB tests and the laboratory corrosion tests, if fuels containing Br were to be combusted, the corrosion damage of superheaters would be expected to be higher than if the fuels contain only Cl. Information generated from these studies can be used to help the boiler manufacturers in selecting materials for the most demanding combustion systems.

The role of emotions in value creation for families in pediatric health care

The purpose of this study was to analyze emotions related to a child’s critical illness from the perspective of the family and discuss the link those emotions might form with value creation. High quality service is of paramount importance in hospital care, especially when a child is diagnosed with critical illness. Through the analysis of patient family emotions and their triggers, the study was aiming to deepen the understanding of value creation for customer. Therefore, the research sought to find answers to the following three sub-questions: 1. What are the emotions experienced? 2. What triggers them? 3. How are the emotions linked to amelioration or aggravation of value for patient and family? The theoretical background of this research is built on two core concepts: emotions and value creation. As both concepts are wide and multifaceted, the research concentrates on viewing emotions from the applicable cognitive angle, identifying and categorizing emotions in a general level. Value creation is studied from the service perspective, discussing the possible relations between emotions and value creation. Moreover, the suitability of views regarding customer value co-creation to health care encounters is analyzed. Qualitative approach was selected as the most appropriate methodology for conducting the empirical research. The empirical data was collected from public blogs, for which a total of 18 blogs were reviewed. Five blogs were selected for the analysis, which had the intent of identifying the emotions experienced by patient families and deepening the knowledge of their role in value creation during health care service encounters. The empirical study of this research discovered a wide range of positive and negative emotions, which denotes that a severe life situation does not prevent the feeling of positive emotions. Furthermore, by combining the empirical findings to the theoretical background, this study concludes that recognizing and treating the patient family as a partner and value creator is essential. The high quality technical aspect of care is vital, but it is not the sole attribute for service quality, as the interpersonal communication plays a large role in the customer’s overall assessment of the health care performance. The patients and their families largely evaluate the service encounter based on their perceptions, thus emotions play a significant role. Depending on the service experience, value maybe created or destructed. Hence, this study posits emotion at the core of the service encounter, indicating towards the importance of active assessment of customer perceptions and the recognition of the emotional states