Kaupungin ja maaseudun vuorovaikutus alueellisessa kehittämispolitiikassa

In Finland, European Union membership and economic globalisation have changed the position of regions from closed territorial systems to nodes of open international networks. The increasing complexity of cities as globalised knowledge centres and functionally specialised and diversified rural areas, and on the other hand growing disparities between prosperous urban cores and lagging peripheral areas are also essential features in contemporary regional development. These trends have produced new needs to promote mutual dialogue between cities and the countryside in western market economies. Urban-rural interaction is an idea which was developed in the late 1990s within regional policy to pull together these new challenges to regional development and handle cities and the countryside as a whole. The aim of my study is to conceptualise the idea of urban-rural interaction, explain the phenomenon theoretically, clarify past and present urban and rural development and analyse regional policies from the interaction angle. The ultimate purpose is to illustrate the existence and nature of particular interaction policy in a globalising society. The general method is discourse analysis, which I use in three cases: Central Finland, South-Ostrobothnia and South-West Finland. Theoretically I have a two-dimensional approach. On the first hand I use World-System theory to explain how the global economy is moulding urban and rural structures at the regional level. On the other hand I use regime theory to explain local political actions and practises between cities and the countryside under the overlapping pressures deriving from reformulated regional structures and policies.

Adaptation to globalisation in Finland has been carried out by strengthening urban centres. The stress in regional policy has been in urban development. The development of the countryside has mostly been implemented by a separate rural policy. At the end of the 1990s and early 2000s Finnish cities have actually shown themselves to be competitive in global markets. The drawbacks of the new growth centre policy have been the sparse network of prosperous cities and their weak spreading effects, which have hindered comprehensive regional development. Tensions between urban and rural areas have also deepened. In this situation the interaction policy is used as a way of balancing development and moderate conflicts within the regions. From this point of view urban-rural interaction can be seen as a way of tackling the challenges of globalisation.

On the other hand the results emphasise that actors involved in regional development still believe, although the hegemonic discourse is on urban policy, that there are opportunities to stimulate progress in the countryside as well. In the situation where regional authorities control development resources, rural development can be successful only if rural actors manage to establish fruitful relationships with their urban partners. This is also the weakness of the programme-based regional policy. If rural municipalities or other actors are for any reason incapable of building development regimes with cities, the offers of interaction policy will be useless.

The problem of the interaction policy is that the focus and methods of it have so far been rather underdeveloped. In order to improve the efficiency of the interaction policy, further research should concentrate on the social processes which define the position of cities and the countryside as partners of interaction, and practises which promote or prohibit the possibilities of developing the interaction policy. The efforts to define different contents of urban-rural interaction or promote interaction projects should not have such an important role in the future as they have had so far. Instead, the focus of interaction policy should be on questions such as how to manage the political tensions between town and country and how to create a positive atmosphere for regional policy where the needs of urban and rural development are promoted equally.

Yhdyskuntajätevesien yhteispuhdistus sellu- ja paperitehtaan aktiivilietelaitoksessa

Työn tavoitteena on ollutselvittää kustannukset, joita syntyy, jos Kuusankosken kaupungin puhdistamolta johdetaan jätevedet UPM-Kymmene Oyj:n Kymin aktiivilietelaitokselle puhdistettaviksi, ja kustannukset, joita aiheutuu kaupungin puhdistamon laajentamisesta typenpoistoon sopivaksi sekä verrata näiden hankkeiden kustannuksia. Työssä selvitetään myös muutokset, joita yhteispuhdistukseen siirtymisestä aiheutuu Kymin aktiivilietelaitokselle ja miten jätevesikuormitus Kymijokeen muuttuu. Lisäksi työssäon tarkasteltu yhdyskuntajätevedenpuhdistamoilta tuotujen lietteiden vaikutustaKymin aktiivilietelaitoksen toimintaan ja luotu katsaus käytössä olevien metsäteollisuusyritysten ja kaupunkien yhteispuhdistamojen toimintaan Raumalla ja Grand Rapids:ssa. Yhdyskuntajätevesien yhteispuhdistuksesta sellu- ja paperitehtaan aktiivilietelaitoksessa on saatu hyviä kokemuksia Raumalta. Kokonaistyppikuormitus Rauman merialueelle on puolittunut ja lisäksi fosfori- ja BOD-kuormitukset ovat vähentyneet. Ravinteiden tarve puhdistamolla on kuitenkin ennakoitua suurempija ravinteiden kulutusta voidaan selittää monella tekijällä mm. lämpötilan laskulla ja lietekuorman lisääntymisellä. Kymin puhdistamolle on tuotu Akanojan puhdistamon ylijäämäliete vuodesta 1996 lähtien. Vuoden 2004 marras- ja joulukuussa suoritetussa kokeilussa Kymin puhdistamolle tuotiin Akanojan lietteiden lisäksi osa Kouvolan puhdistamolla syntyneistä lietteistä. Kokeilun perusteella voidaan todeta, että yhdyskuntajätevesilietteiden tuonnilla voidaan korvata puhdistamolla tarvittavia ravinteita. Uusi jätteenpolttodirektiivi tuskin aiheuttanee ongelmia poltettaessa voimalaitoksella ylijäämälietettä, joka sisältää myös yhdyskuntajätevesistä peräisin olevaa lietettä. Kymin aktiivilietelaitoksen lämpötila tulee laskemaan yhteispuhdistukseen siirryttäessä viileiden yhdyskuntajätevesien vaikutuksesta. Yhteispuhdistustilanteessa Kuusankosken keskustan jokialueen bakteeritilanteeseen ei ole todennäköisesti tulossa muutosta, mutta virustilanteen muuttuminen voi olla mahdollista. Yhteispuhdistukseen siirryttäessä Kymin puhdistamon kapasiteettia tarvitsee kasvattaa ainoastaan jälkiselkeytyksen suhteen. Yhteispuhdistustilanteessa jätevesikuormitus Kymijokeen tulee pienenemään erityisesti typen osalta ja myös BOD- ja fosforikuormat pienenevät. COD-kuormitus pysyy lähes ennallaan ja kiintoainekuorma saattaa lisääntyä hiukan. Yhteispuhdistustilanteessa Kymijokeen aiheutuu jätevesikuormitusta myös ohituksista, kun yhdyskuntajätevesimäärä ylittää hetkellisesti esimerkiksi rankkasateen sattuessa mitoitusvirtaamansa arvon. Investointikustannukseksi, Kuusankosken kaupungin puhdistamon muuttamisesta typenpoistoon sopivaksi, arvioitiin mitoitusvirtaamasta riippuen 3 210 000 ¤ tai 2 460 000 ¤. Yhteispuhdistukseen siirtyminen aiheuttaa kaupungille n. 3 755 000 ¤ investointikustannuksen ja Kymin puhdistamolle n. 365 000 ¤. Investointikustannuksiltaan yhteispuhdistukseen siirtyminen tulee kaupungille kalliimmaksi mutta pitkällä aikavälillä tarkasteltuna edullisempi vaihtoehto Kuusankosken kaupungin kannalta on siirtyminen yhteispuhdistukseen.

Building distributed high availability system

Today’s commercial web sites are under heavy user load and they are expected to be operational and available at all times. Distributed system architectures have been developed to provide a scalable and failure tolerant high availability platform for these web based services. The focus on this thesis was to specify and implement resilient and scalable locally distributed high availability system architecture for a web based service. Theory part concentrates on the fundamental characteristics of distributed systems and presents common scalable high availability server architectures that are used in web based services. In the practical part of the thesis the implemented new system architecture is explained. Practical part also includes two different test cases that were done to test the system's performance capacity.

Itse tehty moderni. Gramofoni, polkupyörä ja valokuvaus suomalaisten elämässä 1880-luvulta 1940-luvulle

Tässä tutkimuksessa tarkastellaan aineellista modernia ja materiaalisen kulttuurin muutosta Suomessa 1880-luvulta 1940-luvulle tutkimalla sitä, miten kolme kansainvälistä teknologiaa, gramofoni, polkupyörä ja valokuvaus, otettiin Suomessa käyttöön ja millaisia paikallisia ilmiöitä niiden ympärille kehittyi. Tutkimus koostuu johdanto- ja yhteenveto-osan lisäksi kuudesta artikkelista, joissa käsitellään seuraavia alateemoja: itse tehtyjä polkupyöriä, käyntikorttikuvien käyttöä maalaiskodeissa, maaseudun pyöräilyä ja sen muistelemista, vuoden 1929 gramofonikuumetta, valokuvausta teknisenä harrastuksena sekä maalaisia gramofonin käytön tapoja. Tutkimuksen lähteinä on käytetty laajoja muistitietoaineistoja, sanoma- ja aikakauslehtiaineistoja, arkistoaineistoja, aikalaiskirjallisuutta ja museoesineitä. Lähteistä on etsitty mikrohistoriallista lukutapaa noudattaen johtolankoja gramofoniin, polkupyörään ja valokuvaukseen liittyneihin käytäntöihin. Esitän, että muistitietolähteet, muiden lähteiden kanssa ristiinluettuina, antavat hyvän mahdollisuuden sellaisten arjen käytäntöjen tarkasteluun, joiden tutkiminen muiden lähteiden perusteella olisi vaikeaa tai mahdotonta. Tutkimuksessa käytetyistä teoreettisista kehyksistä niin teknologian sosiaalinen rakentuminen, arjen historia, materiaaliseen kulttuuriin liittyvä teoriapohja, kulutuskulttuurin tutkimus kuin käytäntöteoriatkin kannustavat tarkastelemaan sitä, miten käyttäjien toiminta muokkaa ja määrittää teknologiaa. Näiden teoriasuuntausten pohjalta olen tätä tutkimusta varten kehittänyt itse tehdyn modernin ja kansankeksinnön käsitteet, jotka tarkentavat katseen ajallisesti ja paikallisesti tyypillisiin teknologian muokkauksen ja määrittelyn tapoihin sekä paikalliseen teknologiseen kekseliäisyyteen. Itse tehdyn modernin käsite auttaa hahmottamaan materiaalisia muutoksia ja pysyvyyksiä ajanjaksolla 1800-luvun lopulta toiseen maailmansotaan. Suomalaiset muovasivat omanlaisensa modernin, jossa uutuudet ja muutokset sulautuivat osaksi sitkeinä jatkuvia ja hitaasti muuttuvia maalaisyhteiskunnan toimintatapoja ja muokkasivat niitä vähitellen. Itse tehty moderni sekoitti omavaraisuutta ja kulutuskulttuuria, käsillä tekemiseen perustuvaa taitavuutta ja kursseilla sekä koulutuksessa saavutettua teknistä tietoa, paikallisia aineksia ja kansainvälisiä vaikutteita. Puhumalla kansanomaisista keksinnöistä olen halunnut korostaa tällaisten yhdistelmien mahdollisuutta ruohonjuuritasolla ja massatuotettujen laitteiden sovittamista osaksi pitkälti itse tehtyä ja omavaraista esinemaailmaa.

Reuse of electric vehicle battery in uninterruptible power supply

Tässä diplomityössä tarkasteltiin Nissan Leaf -sähköauton käytetyn litiumakun soveltuvuutta UPS-varavirtalaitteen energialähteeksi. Kun akku on heikentynyt niin ettei sen kapasiteetti enää ole riittävä autokäyttöön, sitä voidaan kuitenkin vielä hyödyntää muissa sovelluksissa, kuten UPS-laitteessa. Työ sai alkunsa osana GreenDataNet-projektia, jossa pyritään kehittämään datakeskuksiin ympäristöä vähemmän kuormittavia ratkaisuja käyttämällä uusiutuvia energialähteitä, akkujen uusiokäytöllä, sekä energianhallinnan optimoinnilla. Työssä käytiin läpi akun ja sen ohjausjärjestelmän ominaisuuksia, kerrottiin UPS:in ohjelmistoon tehdyistä muutoksista sekä esitettiin testitulokset. Lopputuloksena todettiin akun sopivan muuten hyvin UPS-käyttöön, mutta vaadittu päivittäinen kennojännitteiden tasaus ja sen aiheuttama katkos energian saatavuuteen heikentää UPSin käyttövarmuutta kuorman suojauksessa. Lopussa esitettiin muutamia ehdotuksia tämän ongelman korjaamiseksi.

Sensor communication in Smart cities and regions: An efficient IoT-based remote health monitoring system

Recent advances in Information and Communication Technology (ICT), especially those related to the Internet of Things (IoT), are facilitating smart regions. Among many services that a smart region can offer, remote health monitoring is a typical application of IoT paradigm. It offers the ability to continuously monitor and collect health-related data from a person, and transmit the data to a remote entity (for example, a healthcare service provider) for further processing and knowledge extraction. An IoT-based remote health monitoring system can be beneficial in rural areas belonging to the smart region where people have limited access to regular healthcare services. The same system can be beneficial in urban areas where hospitals can be overcrowded and where it may take substantial time to avail healthcare. However, this system may generate a large amount of data. In order to realize an efficient IoT-based remote health monitoring system, it is imperative to study the network communication needs of such a system; in particular the bandwidth requirements and the volume of generated data. The thesis studies a commercial product for remote health monitoring in Skellefteå, Sweden. Based on the results obtained via the commercial product, the thesis identified the key network-related requirements of a typical remote health monitoring system in terms of real-time event update, bandwidth requirements and data generation. Furthermore, the thesis has proposed an architecture called IReHMo - an IoT-based remote health monitoring architecture. This architecture allows users to incorporate several types of IoT devices to extend the sensing capabilities of the system. Using IReHMo, several IoT communication protocols such as HTTP, MQTT and CoAP has been evaluated and compared against each other. Results showed that CoAP is the most efficient protocol to transmit small size healthcare data to the remote servers. The combination of IReHMo and CoAP significantly reduced the required bandwidth as well as the volume of generated data (up to 56 percent) compared to the commercial product. Finally, the thesis conducted a scalability analysis, to determine the feasibility of deploying the combination of IReHMo and CoAP in large numbers in regions in north Sweden.

Clustering and International Competitiveness of Information Technology Industry in the Saint Petersburg Area

The main objective of this study is to assess the potential of the information technology industry in the Saint Petersburg area to become one of the new key industries in the Russian economy. To achieve this objective, the study analyzes especially the international competitiveness of the industry and the conditions for clustering. Russia is currently heavily dependent on its natural resources, which are the main source of its recent economic growth. In order to achieve good long-term economic performance, Russia needs diversification in its well-performing industries in addition to the ones operating in the field of natural resources. The Russian government has acknowledged this and started special initiatives to promote such other industries as information technology and nanotechnology. An interesting industry that is basically less than 20 years old and fast growing in Russia, is information technology. Information technology activities and markets are mainly concentrated in Russia’s two biggest cities, Moscow and Saint Petersburg, and areas around them. The information technology industry in the Saint Petersburg area, although smaller than Moscow, is especially dynamic and is gaining increasing foreign company presence. However, the industry is not yet internationally competitive as it lacks substantial and sustainable competitive advantages. The industry is also merely a potential global information technology cluster, as it lacks the competitive edge and a wide supplier and manufacturing base and other related parts of the whole information technology value system. Alone, the industry will not become a key industry in Russia, but it will, on the other hand, have an important supporting role for the development of other industries. The information technology market in the Saint Petersburg area is already large and if more tightly integrated to Moscow, they will together form a huge and still growing market sufficient for most companies operating in Russia currently and in the future. Therefore, the potential of information technology inside Russia is immense.

Clustering and international competitiveness of information technology industry in the Saint Petersburg area

The main objective of this study is to assess the potential of the information technology industry in the Saint Petersburg area to become one of the new key industries in the Russian economy. To achieve this objective, the study analyzes especially the international competitiveness of the industry and the conditions for clustering. Russia is currently heavily dependent on its natural resources, which are the main source of its recent economic growth. In order to achieve good long-term economic performance, Russia needs diversification in its well-performing industries in addition to the ones operating in the field of natural resources. The Russian government has acknowledged this and started special initiatives to promote such other industries as information technology and nanotechnology. An interesting industry that is basically less than 20 years old and fast growing in Russia, is information technology. Information technology activities and markets are mainly concentrated in Russia’s two biggest cities, Moscow and Saint Petersburg, and areas around them. The information technology industry in the Saint Petersburg area, although smaller than Moscow, is especially dynamic and is gaining increasing foreign company presence. However, the industry is not yet internationally competitive as it lacks substantial and sustainable competitive advantages. The industry is also merely a potential global information technology cluster, as it lacks the competitive edge and a wide supplier and manufacturing base and other related parts of the whole information technology value system. Alone, the industry will not become a key industry in Russia, but it will, on the other hand, have an important supporting role for the development of other industries. The information technology market in the Saint Petersburg area is already large and if more tightly integrated to Moscow, they will together form a huge and still growing market sufficient for most companies operating in Russia currently and in the future. Therefore, the potential of information technology inside Russia is immense.

THE IMPACT OF GUANXI TO MULTINATIONAL COMPANIES BUSINESS PERFORMACE, CORPORATE REPUTATION, NEGOTIATIONS AND MANAGEMENT IN CHINA

The modern business development of China began during 1978 and during the last decades Chinese have created one of the most dynamic and strongest economies in the world. China is now second largest trading power calculated in dollars. The special characteristic of this economic development is that it is not copy of any existing economy, instead the developments have been strongly influenced by the Chinese cultural characteristics. One cultural characteristic, guanxi, which is a “network of services and counter- services” is argued to be major component of successful business in China where these changes of services happen between people but also between companies. Obtaining introductions and the guanxi when doing business in China will give attentive audience and security for companies business. Despite the evidenced importance of guanxi, China´s business environment is rapidly changing towards Western economies, which might then reduce the importance of guanxi. Therefore the current impact of guanxi is a important topic to study. The main purpose of this study is to explore the impact of guanxi for Western big and small sized multinational companies´ business processes when doing business in China. This study looks What is the impact of guanxi in contemporary Chinese business environment for foreign companies doing business in China. Sub-questions in this research focus on what is the impact of guanxi on corporate reputation, management and negotiations. Findings present a mixed view where the importance of guanxi is not anymore critical, especially among younger people in the cities, however guanxi was clearly important outside the cities and when dealing with government officials. Efficient use of guanxi can be extremely profitable especially during early stages of business operations and guanxi plays role when bargaining prices and ensuring product quality from the factories. Therefore guanxi should be considered as essential element for successful business in China.

Agent-based management systems for many-core platforms : rigorous design and efficient implementation

Due to various advantages such as flexibility, scalability and updatability, software intensive systems are increasingly embedded in everyday life. The constantly growing number of functions executed by these systems requires a high level of performance from the underlying platform. The main approach to incrementing performance has been the increase of operating frequency of a chip. However, this has led to the problem of power dissipation, which has shifted the focus of research to parallel and distributed computing. Parallel many-core platforms can provide the required level of computational power along with low power consumption. On the one hand, this enables parallel execution of highly intensive applications. With their computational power, these platforms are likely to be used in various application domains: from home use electronics (e.g., video processing) to complex critical control systems. On the other hand, the utilization of the resources has to be efficient in terms of performance and power consumption. However, the high level of on-chip integration results in the increase of the probability of various faults and creation of hotspots leading to thermal problems. Additionally, radiation, which is frequent in space but becomes an issue also at the ground level, can cause transient faults. This can eventually induce a faulty execution of applications. Therefore, it is crucial to develop methods that enable efficient as well as resilient execution of applications. The main objective of the thesis is to propose an approach to design agentbased systems for many-core platforms in a rigorous manner. When designing such a system, we explore and integrate various dynamic reconfiguration mechanisms into agents functionality. The use of these mechanisms enhances resilience of the underlying platform whilst maintaining performance at an acceptable level. The design of the system proceeds according to a formal refinement approach which allows us to ensure correct behaviour of the system with respect to postulated properties. To enable analysis of the proposed system in terms of area overhead as well as performance, we explore an approach, where the developed rigorous models are transformed into a high-level implementation language. Specifically, we investigate methods for deriving fault-free implementations from these models into, e.g., a hardware description language, namely VHDL.

A new map of Denmark, Norway, Sweden, & Moscovy shewing their present general divisions, cheif, [!] cities or towns, rivers, mountains, &c.

[N. 1:8500000].

Formal development of resilient distributed systems

Resilience is the property of a system to remain trustworthy despite changes. Changes of a different nature, whether due to failures of system components or varying operational conditions, significantly increase the complexity of system development. Therefore, advanced development technologies are required to build robust and flexible system architectures capable of adapting to such changes. Moreover, powerful quantitative techniques are needed to assess the impact of these changes on various system characteristics. Architectural flexibility is achieved by embedding into the system design the mechanisms for identifying changes and reacting on them. Hence a resilient system should have both advanced monitoring and error detection capabilities to recognise changes as well as sophisticated reconfiguration mechanisms to adapt to them. The aim of such reconfiguration is to ensure that the system stays operational, i.e., remains capable of achieving its goals. Design, verification and assessment of the system reconfiguration mechanisms is a challenging and error prone engineering task. In this thesis, we propose and validate a formal framework for development and assessment of resilient systems. Such a framework provides us with the means to specify and verify complex component interactions, model their cooperative behaviour in achieving system goals, and analyse the chosen reconfiguration strategies. Due to the variety of properties to be analysed, such a framework should have an integrated nature. To ensure the system functional correctness, it should rely on formal modelling and verification, while, to assess the impact of changes on such properties as performance and reliability, it should be combined with quantitative analysis. To ensure scalability of the proposed framework, we choose Event-B as the basis for reasoning about functional correctness. Event-B is a statebased formal approach that promotes the correct-by-construction development paradigm and formal verification by theorem proving. Event-B has a mature industrial-strength tool support { the Rodin platform. Proof-based verification as well as the reliance on abstraction and decomposition adopted in Event-B provides the designers with a powerful support for the development of complex systems. Moreover, the top-down system development by refinement allows the developers to explicitly express and verify critical system-level properties. Besides ensuring functional correctness, to achieve resilience we also need to analyse a number of non-functional characteristics, such as reliability and performance. Therefore, in this thesis we also demonstrate how formal development in Event-B can be combined with quantitative analysis. Namely, we experiment with integration of such techniques as probabilistic model checking in PRISM and discrete-event simulation in SimPy with formal development in Event-B. Such an integration allows us to assess how changes and di erent recon guration strategies a ect the overall system resilience. The approach proposed in this thesis is validated by a number of case studies from such areas as robotics, space, healthcare and cloud domain.

A new map of Denmark, Norway, Sweden & Moscovy, shewing their present general divisions, cheif, cities or towns, rivers, mountains, &c.: dedicated to his highness William Duke of Glocester

0-meridiaani Lontoo: Koordinaattiasteikko: W15°-E85°, N74°30'-48°.