Mexico ; New York ; Fall of Niagara ; Quebec

Irtokartta

Adoption av träkomposit teknologi på svenska trähusmarknaden

Syftet med uppsatsen är att kategorisera träkomposit teknologi adoption på svenska trähusmarknaden genom fallstudie av trähustillverkare och fasadbehandlare. Som undersöknings metod har intervjueroch facklitteratur använts. Med hjälp av litteraturmaterialet sammanställdes enteoretisk referensram, vad efter sedan fallföretagen intervjuades. Genom insamlade sekundärdata betraktades företaget i den teoretiska referensramen. Undersökningens teorin baserar sig på adoption av innovation. Inledningsvis redogörs traditionell segmentering av industriella marknader och sedan segmentering efter kundlivscykel. Tyngdpunkten är ändå på teknologi adoption livscykel. Empirin är fallstudie av modul, storblock trähustillverkare och fasadbehandlare. Företagets situation studeras inom teoretiska referensramen för att kunna göra en analys avadoptionen och göra slutsatser om produktlanseringen. Rekommendation är några aspekter som innobuild bör beakta vid försäljning av Fasec-fasadsystem. Undersökningen torde kunna användas som stöd vid adoption av en innovation.

Analyzing Carbon Trade Permits in Optimization Framework

The threats caused by global warming motivate different stake holders to deal with and control them. This Master's thesis focuses on analyzing carbon trade permits in optimization framework. The studied model determines optimal emission and uncertainty levels which minimize the total cost. Research questions are formulated and answered by using different optimization tools. The model is developed and calibrated by using available consistent data in the area of carbon emission technology and control. Data and some basic modeling assumptions were extracted from reports and existing literatures. The data collected from the countries in the Kyoto treaty are used to estimate the cost functions. Theory and methods of constrained optimization are briefly presented. A two-level optimization problem (individual and between the parties) is analyzed by using several optimization methods. The combined cost optimization between the parties leads into multivariate model and calls for advanced techniques. Lagrangian, Sequential Quadratic Programming and Differential Evolution (DE) algorithm are referred to. The role of inherent measurement uncertainty in the monitoring of emissions is discussed. We briefly investigate an approach where emission uncertainty would be described in stochastic framework. MATLAB software has been used to provide visualizations including the relationship between decision variables and objective function values. Interpretations in the context of carbon trading were briefly presented. Suggestions for future work are given in stochastic modeling, emission trading and coupled analysis of energy prices and carbon permits.

Identification of Turning Points in the Research on Titanium Dioxide Production and Application

This dissertation "Identification of turning points in the research on titanium dioxide production and application" aims at detecting in scientific literatures emerging trends and sudden changes in titanium dioxide production and application. These key changes are then studied to determine its transient patterns and its effect on the research on titanium dioxide production and application The source of information is from bibliographic data which discussed titanium dioxide production and application. These bibliographic data where obtained from ISI Web of Knowledge and then formed into a network of clusters by applying software called Citespace.

Sustainable Waste-to-Energy Production: Performance Evaluation of Distributed Generation fuelled by Landfill Gas

The environmental impact of landfill is a growing concern in waste management practices. Thus, assessing the effectiveness of the solutions implemented to alter the issue is of importance. The objectives of the study were to provide an insight of landfill advantages, and to consolidate landfill gas importance among others alternative fuels. Finally, a case study examining the performances of energy production from a land disposal at Ylivieska was carried out to ascertain the viability of waste to energy project. Both qualitative and quantitative methods were applied. The study was conducted in two parts; the first was the review of literatures focused on landfill gas developments. Specific considerations were the conception of mechanism governing the variability of gas production and the investigation of mathematical models often used in landfill gas modeling. Furthermore, the analysis of two main distributed generation technologies used to generate energy from landfill was carried out. The review of literature revealed a high influence of waste segregation and high level of moisture content for waste stabilization process. It was found that the enhancement in accuracy for forecasting gas rate generation can be done with both mathematical modeling and field test measurements. The result of the case study mainly indicated the close dependence of the power output with the landfill gas quality and the fuel inlet pressure.

Integration of the Food Waste Disposer Unit to the Existing Sewage System

Among the numerous approaches to food waste treatment, the food waste disposers method (FWDs), as a newcomer, has become slowly accepted by the general public owing to the worries about its impact on the existing sewage system. This paper aims to justify the role of FWDs in the process of urbanization in order to better prepare a city to take good care of the construction of its infrastructure and the solid waste treatment. Both the literatures and the case study help to confirm that FWDs has no negative effects on the wastewater treatment plant and it is also environmental friendly by reducing the greenhouse gas emissions. In the case study, the Lappeenranta waste water treatment plant has been selected in order to figure out the possible changes to a WWTP following the integration of FWDs: the observation shows only minor changes take place in a WWTP, in case of 25% application, like BOD up 7%, TSS up 6% and wastewater flowrate up 6%, an additional sludge production of 200 tons per year and the extra yield of methane up to 10000m3 per year; however, when the utilization rate of FWD is over 75%, BOD, TSS, and wastewater flowrate will experience more significant changes, thus exerting much pressure on the existing WWTP. FWDs can only be used in residential areas or cities equipped with consummate drainage network within the service sphere of WWTP, therefore, the relevant authority or government department should regulate the installation frequency of FWDs, while promoting the accessory application of FWDs. In the meanwhile, WWTP should improve their treatment process in order to expand their capacity for sludge treatment so as to stay in line with the future development of urban waste management.

Rocking the Euro boat: scheduled market announcements' effects on Euro implied volatility

The purpose of this thesis is to investigate scheduled market announcements’ effects on Euro implied volatility. Timeline selected for this study ranges from 2005 to 2009. The method chosen is so-called event study approach, in which five days prior to a news announcement stand for a pre-event period, and five days after the announcement form a post-event period. Statistical research method employed is Mann-Whitney-Wilcoxon test, which examines two evenly-sized distributions’ equality, in this case the distributions being the pre- and post-event periods. Observations are based on daily data of US dollar nominated Euro at-the-money call options. Research results partially back up previous literature’s view of uncertainty increasing prior to the news announcement. After the exact contents of the news is public, uncertainty levels measured by implied volatility tend to lower.

Monte Carlo Hypothesis Testing with The Sharpe Ratio

The purpose of this master thesis was to perform simulations that involve use of random number while testing hypotheses especially on two samples populations being compared weather by their means, variances or Sharpe ratios. Specifically, we simulated some well known distributions by Matlab and check out the accuracy of an hypothesis testing. Furthermore, we went deeper and check what could happen once the bootstrapping method as described by Effrons is applied on the simulated data. In addition to that, one well known RobustSharpe hypothesis testing stated in the paper of Ledoit and Wolf was applied to measure the statistical significance performance between two investment founds basing on testing weather there is a statistically significant difference between their Sharpe Ratios or not. We collected many literatures about our topic and perform by Matlab many simulated random numbers as possible to put out our purpose; As results we come out with a good understanding that testing are not always accurate; for instance while testing weather two normal distributed random vectors come from the same normal distribution. The Jacque-Berra test for normality showed that for the normal random vector r1 and r2, only 94,7% and 95,7% respectively are coming from normal distribution in contrast 5,3% and 4,3% failed to shown the truth already known; but when we introduce the bootstrapping methods by Effrons while estimating pvalues where the hypothesis decision is based, the accuracy of the test was 100% successful. From the above results the reports showed that bootstrapping methods while testing or estimating some statistics should always considered because at most cases the outcome are accurate and errors are minimized in the computation. Also the RobustSharpe test which is known to use one of the bootstrapping methods, studentised one, were applied first on different simulated data including distribution of many kind and different shape secondly, on real data, Hedge and Mutual funds. The test performed quite well to agree with the existence of statistical significance difference between their Sharpe ratios as described in the paper of Ledoit andWolf.

Adsorption of hydrogen sulfide by modified cellulose nano/microcrystals

Hydrogen sulfide is toxic and hazardous pollutant. It has been under great interest for past few years because of all the time tighten environmental regulations and increased interest of mining. Hydrogen sulfide gas originates from mining and wastewater treatment systems have caused death in two cases. It also causes acid rains and corrosion for wastewater pipelines. The aim of this master thesis was to study if chemically modified cellulose nanocrystals could be used as adsorbents to purify hydrogen sulfide out from water and what are the adsorption capacities of these adsorbents. The effects of pH and backgrounds on adsorption capacities of different adsorbents are tested. In theoretical section hydrogen sulfide, its properties and different purification methods are presented. Also analytical detection methods for hydrogen sulfide are presented. Cellulose nano/microcrystals, properties, application and different modification methods are discussed and finally theory of adsorption and modeling of adsorption is shortly discussed. In experimental section different cellulose nanocrystals based adsorbents are prepared and tested at different hydrogen sulfide concentrations and in different conditions. Result of experimental section was that the highest adsorption capacity at one component adsorption had wet MFC/CaCO3. At different pH the adsorption capacities of adsorbents changed quite dramatically. Also change of hydrogen sulfide solution background did have effect on adsorption capacities. Although, when tested adsorbents’ adsorption capacities are compared to those find in literatures, it seems that more development of MFC based adsorbents is needed.

Globaalin taloushallinnon palvelukeskuksen perustaminen, mahdollisuudet ja haasteet

Tutkimuksen tavoitteena on tutkia globaalin taloushallinnon palvelukeskuksen perustamisprosessia ja palvelukeskusmalliin liittyviä hyötyjä. Tarkoituksena on määrittää palvelukeskuksen perustamiseen liittyvät vaiheet sekä ne kriittiset tekijät, jotka on huomioitava ennen perustamisprosessia sekä sen aikana. Empiirinen osuus on suoritettu kvalitatiivisena tutkimuksena suorittamalla neljä puolistrukturoitua teemahaastattelua globaalin taloushallinnon palvelukeskuksen perustaneissa organisaatioissa. Tutkimustulokset osoittavat, että merkittävimmät palvelukeskusmalliin liitetyt edut ovat tuottavuuden, tehokkuuden ja laadun paraneminen sekä kustannussäästöt. Kriittisimpiä menestystekijöitä ovat muutoksen suunnitteluun ja hallintaan liittyvät tekijät. Malliin liitetyt haasteet liittyvät pääasiassa globaalin toimintaympäristön monimuotoisuuteen, henkilöstöön, teknologiaan ja prosesseihin. Saadut tulokset ovat erittäin yhteneväisiä aikaisempien tutkimusten kanssa. Empiirisen tutkimuksen tulosten sekä aikaisemman tutkimustiedon perusteella on luotu viisivaiheinen malli globaalin taloushallinnon palvelukeskuksen perustamisprosessista.

The Role of a firm’s mindset in international success - case study of Finnish marine industry firms

This thesis investigates the influence of a firm’s mindset on international success in the context of the Finnish marine industry. The study draws theoretical wisdom from organisational behaviour and strategic management literatures. The research aim set for this study was to identify and categorise existing strategic types based on mindsets found in the marine industry SMEs, and to link the influence of mindsets with success by examining the role of mindsets in a firm’s performance. Mindsets of firms were conceptualised as aggregate collections of perceptions that influence how the surrounding environment is discerned by the members of the firm. Mindsets are idiosyncratic to firms and therefore important firm-specific resources which influence decision-making and can be observed through the strategic behaviour of firms. Qualitative case study method was applied which was further supported by quantitative data on the financial performance of the ten case firms. Taxonomy based on the dimension of mindsets and prediction was developed to demonstrate four ideal types of firms identified within the marine industry. It was found that all of the case firms emphasised adaptation in their strategy while planning was emphasised to a varying degree. Moreover, two different methods of adapting were found; proactive and reactive. Firms which plan in the long-term and adapt proactively constantly investigate whether their plans are synchronous with the realities of the market; by having an open mindset, a firm’s perception of the reality of the market is enabling the firm to develop value creating strategies which are superiorly informed.This finding was supported by the financial data and led to the proposition that having an open mindset and placing a high level of emphasis on prediction may have a positive influence on international success. Also, it was proposed that concentrating only on exploiting business opportunities in the present time and not exploring any addition opportunities can have a negative influence on the firm’s performance, even if the mindset of the firm is open.

Hinnoittelu ja asiakaskannattavuus johdon laskentatoimessa ja markkinoinnissa

Tässä kandidaatintyössä on tutkittu hinnoittelua ja asiakaskannattavuutta johdon laskentatoimen ja markkinoinnin kirjallisuuksissa. Työn tarkoituksena oli tarkastella näiden alojen välisiä eroja hinnoittelussa ja asiakaskannattavuudessa, sekä osoittaa kuinka niitä käytetään, ja miten kyseiset aiheet linkittyvät toisiinsa. Työ on toteutettu kirjallisuustutkimuksena hyödyntäen painettua kirjallisuutta ja elektronista tiedonhakua. Hinnoittelu eroaa suuresti markkinoinnin ja johdon laskentatoimen kirjallisuuksissa. Johdon laskentatoimi käsittelee nykyhetkeä analysoivia asiakaskannattavuuden mittausmalleja, kun taas markkinointi käsittelee tulevaisuutta analysoivia menetelmiä. Sekä johdon laskentatoimi että markkinointi on kiinnostunut kasvavissa määrin asiakaskannattavuuden analysoimisesta. Hinnoittelu ja asiakaskannattavuus vaikuttavat suoraan toisiinsa. ABC-laskennan avulla voidaan toteuttaa analyyseja tuotekustannuksista ja asiakkaista samanaikaisesti. Tulevaisuudessa näiden aihealueiden ja alojen synergiaa parantamalla yritykset pystyisivät kehittämään kannattavuuttaan suuresti.

Before internationalisation : reflections of lateral rigidity on managerial decision making

The purpose of the study is to analyse lateral rigidity in the framework of pre-internationalisation to find out its reflections on managerial decision making. The interest of the study lies in the intersection of the meaningful but relatively stagnant concept of lateral rigidity, and the pre-internationalisation phase of companies that has received only a limited amount of research attention. The theoretical basis for the study is drawn from managerial decision making and internationalisation literatures. Firstly, the study aims to define the concept of lateral rigidity in order to secondly find out how it influences managers’ pre-internationalisation decision making. The study is theoretical in nature, and is based solely on literature examination. Concept analysis method is used to determine the attributes of lateral rigidity for the purpose of recognising the concept in the pre-internationalisation framework. The attributes that are found to comprise lateral rigidity are culture, know-how, uncertainty and attitude. Furthermore, these attributes are more specifically found to consist of environmental, personal and operational matters. Through the analysis of the pre-internationalisation literature it is discovered that all the attributes appear there, and present a variety of influences on pre-internationalisation decision making that can be characterised as being negative. The study finds that culture influences managers’ decision making via subjective reasoning and behaviour that stem from a domestic inclination, and via unfamiliarity with foreign markets. Against assumption, home cultural factors, e.g. values and customs, do not appear to have an influence. Know-how is found to influence decision making via managers’ previous experiences, subjective abiding perceptions, and the usage of previous operation patterns. Uncertainty, then again, influences managers’ risk perception, unfamiliarity avoidance, and the scope of potential international operations. Attitude is found to have a robust influence on managerial decision making via the usage of familiar processes and decision regimes, subjective preference of convention, and plausible results of operations. Ergo, the effects of lateral rigidity on managers show to represent an encumbrance in the pre-internationalisation phase; even though internationalisation would take place, the related decisions and actions are highly constrained. Especially the subjectivity of managers is seen to have a meaningful role in the decision making process.