Evaluation of GPRS Radio Link Control Layer in Weak RF Field

General Packet Radio Service (GPRS) mahdollistaa pakettimuotoisen tiedonsiirron GSM-verkossa. Se tarjoaa yhteyden pakettidataverkkoihin, nostaen samalla tiedonsiirtonopeutta radiorajapinnassa. Radioresurssit ovat varattuna vain silloin kun on jotain lähetettävää, tehden täten radioresurssien käytön paljon tehokkaammaksi. Tämä diplomityö keskittyy GPRS protokollaan ja erityisesti sen datapinossa olevaan Radio Link Control (RLC) kerrokseen. RLC-kerros huolehtii GPRS- puhelimen ja tukiaseman välisen yhteyden luotettavuudesta. Työn tavoitteena on tutkia RLC-kerroksen toiminnallisuutta ja sen luotettavuutta heikossa kentässä, sekä selvittää heikon kentän vaikutusta uudelleenlähetyksiin. Työn tuloksena saadaan arvio signaalin voimakkuuden sekä uudelleen lähetysten vaikutuksesta GPRS:n datansiirtonopeuteen. Tämä työ käsittelee myös lyhyesti GSM-järjestelmää, koska lukijan on näin helpompaa ymmärtää myös GPRS-järjestelmän vaatimia teknisiä muutoksia. Tämä diplomityö on tehty osana Nokia Matkapuhelimet Oyj:ssä käynnissä olevaa GPRS tuotekehitysprojektia. Työn tuloksia käytetään testauksen tukena ja niitä on käytetty apuna RLC-kerroksen luotettavuustestauksen suunnittelussa.

An IP capable data link layer protocol for narrow band half-duplex packet data radio networks

The wide adaptation of Internet Protocol (IP) as de facto protocol for most communication networks has established a need for developing IP capable data link layer protocol solutions for Machine to machine (M2M) and Internet of Things (IoT) networks. However, the wireless networks used for M2M and IoT applications usually lack the resources commonly associated with modern wireless communication networks. The existing IP capable data link layer solutions for wireless IoT networks provide the necessary overhead minimising and frame optimising features, but are often built to be compatible only with IPv6 and specific radio platforms. The objective of this thesis is to design IPv4 compatible data link layer for Netcontrol Oy's narrow band half-duplex packet data radio system. Based on extensive literature research, system modelling and solution concept testing, this thesis proposes the usage of tunslip protocol as the basis for the system data link layer protocol development. In addition to the functionality of tunslip, this thesis discusses the additional network, routing, compression, security and collision avoidance changes required to be made to the radio platform in order for it to be IP compatible while still being able to maintain the point-to-multipoint and multi-hop network characteristics. The data link layer design consists of the radio application, dynamic Maximum Transmission Unit (MTU) optimisation daemon and the tunslip interface. The proposed design uses tunslip for creating an IP capable data link protocol interface. The radio application receives data from tunslip and compresses the packets and uses the IP addressing information for radio network addressing and routing before forwarding the message to radio network. The dynamic MTU size optimisation daemon controls the tunslip interface maximum MTU size according to the link quality assessment calculated from the radio network diagnostic data received from the radio application. For determining the usability of tunslip as the basis for data link layer protocol, testing of the tunslip interface is conducted with both IEEE 802.15.4 radios and packet data radios. The test cases measure the radio network usability for User Datagram Protocol (UDP) based applications without applying any header or content compression. The test results for the packet data radios reveal that the typical success rate for packet reception through a single-hop link is above 99% with a round-trip-delay of 0.315s for 63B packets.

Automating The User Interface Implementation Process by Code Generation

3G-radioverkon asetusten hallinnointi suoritetaan säätämällä radioverkkotietokantaan talletettavia parametreja. Hallinnointiohjelmistossa tuhannetradioverkon parametrit näkyvät käyttöliittymäkomponentteina, joita ohjelmiston kehityskaaressa jatkuvasti lisätään, muutetaan ja poistetaan asiakkaan tarpeidenmukaan. Parametrien lisäämisen toteutusprosessi on ohjelmistokehittäjälle työlästä ja mekaanista. Diplomityön tavoitteeksi asetettiin kehittää koodigeneraattori, joka luo kaiken toteutusprosessissa tuotetun koodin automaattisesti niistä määrittelyistä, jotka ovat nykyäänkin saatavilla. Työssä kehitetty generaattori nopeuttaa ohjelmoijan työtä eliminoimalla yhden aikaa vievän ja mekaanisen työvaiheen. Seurauksena saadaan yhtenäisempää ohjelmistokoodia ja säästetään yrityksen ohjelmistotuotannon kuluissa, kun ohjelmoijan taito voidaan keskittää vaativimpiin tehtäviin.

Transport Resource Management within UMTS Radio Network Subsystem

Tällä hetkellä haastavin telekommunikaatioteollisuuden tutkimus – ja kehitystoiminta on keskittynyt kolmannen sukupolven matkapuhelinjärjestelmien ympärille. Järjestelmien standardointityössä on saatu aikaiseksi ensimmäiset vakaat spesifikaatioversiot ja kaupallista toimintaa ollaan parhaillaan aloittelemassa Japanissa ja Euroopassa. Eräs kolmannen sukupolven järjestelmistä on UMTS (Universal Mobile Telecommunications System). Tämä diplomityö antaa yleiskuvan UMTS järjestelmästä ja sen eri verkkoelementtien toiminnallisuuksista. Päähuomio on kiinnitetty radioverkkojärjestelmään (UMTS Terrestrial Radio Access Network) ja erityisesti sen radioaliverkkojärjestelmään (Radio Network Subsystem), joka koostuu radioverkonohjaimesta (Radio Network Controller) ja joukosta siihen kuuluvia tukiasemia (Node B). Radioverkonohjain ja tukiasemat on yhdistetty avoimen rajapinnan kautta jota kutsutaan Iub -rajapinnaksi. Rajapinta tarjoaa radioverkonohjaimelle mahdollisuuden kontrolloida tukiasemia signalointiviestien avulla ja mahdollistaa tehokkaan ja luotettavan käyttäjätiedon siirron radioaliverkkojärjestelmän sisällä. Tämän diplomityön pääasiallinen sisältö on siirtoresurssien hallinta Iub -rajapinnan ylitse. Työssä esitellään ja selitetään siirtoverkon arkkitehtuuri. Myös kaikki Iub:ssä sijaitsevat protokollat ja toiminnalliset yksiköt jotka vaikuttavat siirtoresurssien hallintaan esitellään ja kuvataan yksityiskohtaisesti. Päähuomio on kiinnitetty sovellusprotokolliin sekä rajapinnan siirtoverkko- että radioverkkokerroksella sekä näiden protokollien väliseen vuorovaikutukseen. Kyseiset protokollat ovat Node B Application Part (NBAP) ja Access Link Control Application Part (ALCAP). Työn toteutusosassa käydään lävitse NBAP –protokollan prototyypin ja Node B Manager –toiminnallisen yksikön prototyypin implementaatio.

Fusion weld metal solidification:Continuum from weld interface to centerline

We present a brief résumé of the history of solidification research and key factors affecting the solidification of fusion welds. There is a general agreement of the basic solidification theory, albeit differing - even confusing - nomenclatures do exist, and Cases 2 and 3 (the Chalmers' basic boundary conditions for solidification, categorized by Savage as Cases) are variably emphasized. Model Frame, a tool helping to model the continuum of fusion weld solidification from start to end, is proposed. It incorporates the general solidification models, of which the pertinent ones are selected for the actual modeling. The basic models are the main solidification Cases 1…4. These discrete Cases are joined with Sub-Cases: models of Pfann, Flemings and others, bringing needed Sub-Case variables into the model. Model Frame depicts a grain growing from the weld interface to its centerline. Besides modeling, the Model Frame supports education and academic debate. The new mathematical modeling techniques will extend its use into multi-dimensional modeling, introducing new variables and increasing the modeling accuracy. We propose a model: melting/solidification-model (M/S-model) - predicting the solute profile at the start of the solidification of a fusion weld. This Case 3-based Sub-Case takes into account the melting stage, the solute back-diffusion in the solid, and the growth rate acceleration typical to fusion welds. We propose - based on works of Rutter & Chalmers, David & Vitek and our experimental results on copper - that NEGS-EGS-transition is not associated only with cellular-dendritic-transition. Solidification is studied experimentally on pure and doped copper with welding speed range from 0 to 200 cm/min, with one test at 3000 cm/min. Found were only planar and cellular structures, no dendrites - columnar or equiaxed. Cell sub structures: rows of cubic elements we call "cubelettes", "cell-bands" and "micro-cells", as well as an anomalous crack morphology "crack-eye", were detected, as well as microscopic hot crack nucleus we call "grain-lag cracks", caused by a grain slightly lagging behind its neighbors in arrival to the weld centerline. Varestraint test and R-test revealed a change of crack morphologies from centerline cracks to grainand cell boundary cracks with an increasing welding speed. High speed made the cracks invisible to bare eye and hardly detectable with light microscope, while electron microscope often revealed networks of fine micro-cracks.

Tunable lumped-element bandpass filters for Cognitive Radio application

In this thesis the design of bandpass filters tunable at 400 MHz – 800 MHz was under research. Microwave filters are vital components which provide frequency selectivity in wide variety of electronic systems operating at high frequencies. Due to the occurrence of multi-frequency bands communication and diverse applications of wireless devices, requirement of tunable filters exists. The one of potential implementation of frequency-agile filters is frontends and spectrum sensors in Cognitive Radio (CR). The principle of CR is to detect and operate at a particular available spectrum without interfering with the primary user’s signals. This new method allows improving the efficiency of utilizing allocated spectrum such as TV band (400 MHz – 800 MHz). The focus of this work is development of sufficiently compact, low cost tunable filters with quite narrow bandwidth using currently available lumped-element components and PCB board technology. Filter design, different topologies and methods of tuning of bandpass filters are considered in this work. As a result, three types of topologies of bandpass filter were simulated and realised. They use digitally tunable capacitors (DTCs) for adjusting central frequency at TV "white space" spectrum. Measurements revealed that schematics presented in this work have proper output response and filters are successfully tuned by DTCs.

Virtual technology and haptic interface solutions for design and control of mobile working machines

Commercially available haptic interfaces are usable for many purposes. However, as generic devices they are not the most suitable for the control of heavy duty mobile working machines like mining machines, container handling equipment and excavators. Alternative mechanical constructions for a haptic controller are presented and analysed. A virtual reality environment (VRE) was built to test the proposed haptic controller mechanisms. Verification of an electric motor emulating a hydraulic pump in the electro-hydraulic system of a mobile working machine is carried out. A real-time simulator using multi-body-dynamics based software with hardware-in-loop (HIL) setup was used for the tests. Recommendations for further development of a haptic controller and emulator electric motor are given.

A SOA-based Framework for Multi-Devices and Multi-Platform User Interfaces

This thesis reports investigations on applying the Service Oriented Architecture (SOA) approach in the engineering of multi-platform and multi-devices user interfaces. This study has three goals: (1) analyze the present frameworks for developing multi-platform and multi-devices applications, (2) extend the principles of SOA for implementing a multi-platform and multi-devices architectural framework (SOA-MDUI), (3) applying and validating the proposed framework in the context of a specific application. One of the problems addressed in this ongoing research is the large amount of combinations for possible implementations of applications on different types of devices. Usually it is necessary to take into account the operating system (OS), user interface (UI) including the appearance, programming language (PL) and architectural style (AS). Our proposed approach extended the principles of SOA using patterns-oriented design and model-driven engineering approaches. Synthesizing the present work done in these domains, this research built and tested an engineering framework linking Model-driven Architecture (MDA) and SOA approaches to developing of UI. This study advances general understanding of engineering, deploying and managing multi-platform and multi-devices user interfaces as a service.

Feasibility of replacing multiple ADSL connections with Multi-Dwelling Access

This final project was made for the Broadband/Implementation department of TeliaSonera Finland. The question to be examined is if the operator should replace multiple ADSL connections implemented over a leased line with Multi-Dwelling access based on an Ethernet/Optical Fibre access network. The project starts with describing the technology related to these access network solu-tions and presents the technology that is used in TeliaSonera Finland's access network. It continues from the technology to describe the problem with some of the ADSL implemen-tations of TeliaSonera. The problem is the implementations done over a leased line that can cost TeliaSonera over years as much as a possible investment to extend network when there is several lines leased to the same building. The project proposes a Multi-Dwelling access as a solution to this problem and defines the circumstances when to use it. After a satisfactory solution has found the project takes a view how implementation of the solution might alter the network and a new problem is found. When used commonly to replace need of ADSL implementation Multi-Dwelling access would significantly increase optical cable congestion near operators POP. As a final deed this project also proposes a technical change to existing way to implement multi-dwelling access with EPON technology.

Tasavallan Presidentin radio- ja televisiopuhe Pohjolan päivän johdosta 12.4.1961

Puhe

Tasavallan Presidentin radio- ja televisiopuhe 11.9.1971

Puhe

Tasavallan Presidentin radio- ja TV-haastattelu 5.8.1970

Haastattelu

Tasavallan Presidentin radio- ja televisiopuhe 31.7.1970

Puhe