A Graphical Pattern Editor for Java Frameworks

Ohjelmistojen uudelleenkäyttö on hyvin tärkeä käsite ohjelmistotekniikan alueella.Ohjelmistojen uudelleenkäyttötekniikat parantavat ohjelmistokehitysprosessin laatua. Yleisiä ratkaisuja sekä ohjelmiston suunnittelun että arkkitehtuurin uudelleenkäyttöön ovat olio-ohjelmointi ja sovelluskehykset. Tähän asti ei ole ollut olemassa yleisiä tapoja sovelluskehysten erikoistamiseen. Monet nykyääntunnetuista sovelluskehyksistä ovat hyvin suuria ja mutkikkaita. Tällaisten sovelluskehyksien käyttö on monimutkaista myös kokeneille ohjelmoijille. Hyvin dokumentoidut uudelleenkäytettävät sovelluskehyksen rajapinnat parantavat kehyksen käytettävyyttä ja tehostavat myös erikoistamisprosessiakin sovelluskehyksen käyttäjille. Sovelluskehyseditori (framework editor, JavaFrames) on prototyyppityökalu, jota voidaan käyttää yksinkertaistamaan sovelluskehyksen käyttöä. Perusajatus JavaFrames lähestymistavassa ovat erikoistamismallit, joita käytetään kuvamaan sovelluskehyksen uudelleenkäytettäviä rajapintoja. Näihin malleihin perustuen JavaFrames tarjoaa automaattisen lähdekoodi generaattorin, dokumentoinninja arkkitehtuurisääntöjen tarkistuksen. Tämä opinnäyte koskee graafisen mallieditorin kehittämistä JavaFrames ympäristöön. Työssä on laadittu työkalu,jonka avulla voidaan esittää graafisesti erikoistamismalli. Editori sallii uusien mallien luomisen, vanhojen käyttämättä olevien poistamisen, kuten myös yhteyksien lisäämisen mallien välille. Tällainen graafinen tuki JavaFrames ympäristöönvoi huomattavasti yksinkertaistaa sen käyttöä ja tehdä sovellusten kehittämisprosessista joustavamman.

Applying Qt to programming courses

Työn tavoitteena on sovittaa Qt opetussuunnitelmaan. Työ sisältää Qt:n lyhyen historian sekä katsauksen sen nykytilaan. Nykytilakatsaus sisältää kolme näkökulmaa: miten ja missä Qt:ta voidaan käyttää, sekä sen käyttötarkoitukset teollisuudessa ja opetuksessa. Työn tuloksena syntyy luentodemonstraatiota varten pieni ohjelma, joka on luotu C++:n ja Qt Designerin avulla ja käyttää olennaisia käyttöliittymäkirjaston olioita. Toisena tuotteena työssä syntyy luonnos Lappeenrannan Teknillisen Yliopiston ohjelmointikursseista, joissa Qt:ta voitaisiin käyttää avustamaan opiskelijoita näkemään, miten graafinen ohjelma luodaan sekä valmentaa heitä ymmärtämään viitekehyksien ja graafisten kirjastojen tuomat edut.

Smooth height/age curves from stem analysis with linear programming

[Abstract]

Taajuusmuuttajan ohjelmiston testaus

Tämän diplomityön tavoitteena oli kehittää menetelmiä ja ohjeitataajuusmuuttajan sulautetun ohjelmiston kehityksen aikaiseen testaukseen. Soveltuvia menetelmiä etsittiin tutkimalla laajasti kirjallisuutta sekä selvittämälläyrityksen testauskäytäntöä. Tutkittuja kirjallisuudesta löytyneitä menetelmä olivat testauskehykset, simulointi ja staattinen sekä automaattinen testaus. Kirjallisuudesta etsittiin myös menetelmiä, joiden avulla testausprosessia voidaan helpottaa tai muuten parantaa. Tällaisista menetelmistä tutkittiin muun muassa testidatan valintaa, testauslähtöistä kehitystä sekä testattavuuden parantamista. Lisäksi selvitettiin uudelleenkäytettävien testien ohjelmointiin soveltuvia ohjelmointikieliä. Haastatteluiden ja dokumentaation avulla saatiin hyvä käsitys yrityksessä vallitsevasta testauskäytännöstä sekä sen ongelmakohdista. Testauksen ongelmiksi havaittiin testausprosessin järjestelmällisyyden puute sekä tarve suunnittelijoiden testauskoulutukseen. Testausprosessin parantamiseksi esitetään moduulitestauskehyksen käyttöönottoa. Lisäksi suunnittelijoiden testauskoulutuksella arvioidaan olevan suuri vaikutus koko testausprosessiin. Testitapausten suunnitteluun esitetään menetelmiä, joiden avulla voidaan suunnitella kattavampia testejä.

Python as a programming language for the introductory programming courses

Tämä kandidaatintyö tutkii tietotekniikan perusopetuksessa keskeisen aiheen,ohjelmoinnin, alkeisopetusta ja siihen liittyviä ongelmia. Työssä perehdytään ohjelmoinnin perusopetusmenetelmiin ja opetuksen lähestymistapoihin, sekä ratkaisuihin, joilla opetusta voidaan tehostaa. Näitä ratkaisuja työssä ovat mm. ohjelmointikielen valinta, käytettävän kehitysympäristön löytäminen sekä kurssia tukevien opetusapuvälineiden etsiminen. Lisäksi kurssin läpivientiin liittyvien toimintojen, kuten harjoitusten ja mahdollisten viikkotehtävien valinta kuuluu osaksitätä työtä. Työ itsessään lähestyy aihetta tutkimalla Pythonin soveltuvuutta ohjelmoinnin alkeisopetukseen mm. vertailemalla sitä muihin olemassa oleviin yleisiin opetuskieliin, kuten C, C++ tai Java. Se tarkastelee kielen hyviä ja huonoja puolia, sekä tutkii, voidaanko Pythonia hyödyntää luontevasti pääasiallisena opetuskielenä. Lisäksi työ perehtyy siihen, mitä kaikkea kurssilla tulisi opettaa, sekä siihen, kuinka kurssin läpivienti olisi tehokkainta toteuttaa ja minkälaiset tekniset puitteet kurssin toteuttamista varten olisi järkevää valita.

Simulation Supported Robot Programming using XML

The main objective of this master's thesis is to study robot programming using simulation software, and also how to embed the simulation software into company's own robot controlling software. The further goal is to study a new communication interface to the assembly line's components -more precisely how to connect the robot cell into this new communication system. Conveyor lines are already available where the conveyors use the new communication standard. The robot cell is not yet capable of communicating with to other devices using the new communication protocols. The main problem among robot manufacturers is that they all have their own communication systems and programming languages. There has not been any common programming language to program all the different robot manufacturers robots, until the RRS (Realistic Robot Simulation) standards were developed. The RRS - II makes it possible to create the robot programs in the simulation software and it gives a common user interface for different robot manufacturers robots. This thesis will present the RRS - II standard and the robot manufacturers situation for the RRS - II support. Thesis presents how the simulation software can be embedded into company's own robot controlling software and also how the robot cell can be connected to the CAMX (Computer Aided Manufacturing using XML) communication system.

Comparison of application frameworks designed to support application extensibility

Reusability has become more popular factor in modern software engineering. This is mainly because object-orientation has brought methods that allow reusing more easily. Today more and more application developer thinks how they can reuse already existing applications in their work. If the developer wants to use existing components outside the current project, he can use design patterns, class libraries or frameworks. These provide solution for specific or general problems that has been already encountered. Application frameworks are collection of classes that provides base for the developer. Application frameworks are mostly implementation phase tools, but can also be used in application design. The main purpose of the frameworks is separate domain specific functionalities from the application specific. Usually the frameworks are divided into two categories: black and white box. Difference between those categories is the way the reuse is done. The application frameworks provide properties that can be examined and compared between different frameworks. These properties are: extensibility, reusability, modularity and scalability. These examine how framework will handle different platforms, changes in framework, increasing demand for resources, etc. Generally application frameworks do have these properties in good level. When comparing general purpose framework and more specific purpose framework, the main difference can be located in reusability of frameworks. It is mainly because the framework designed to specific domain can have constraints from external systems and resources. With general purpose framework these are set by the application developed based on the framework.

WWW-pohjaisen sovelluksen automatisoitu testaus ja sitä edistävät ohjelmointikäytännöt

Ohjelmistotestauksen avulla voidaan tarkastella sovelluksen vastaavuutta vaatimuksiin. Tavoitteena on löytää sovelluksesta virheitä, ja siten parantaa sovelluksen laatua. Sovelluksen laatu voidaan määritellä useilla mittareilla, kuten esimerkiksi testattavuudella. Tässä työssä tarkastellaan WWW-sovelluksen automatisoidun testauksen toteutusta, jossa käytetään apuna testauskehystä. Automatisoituun testaukseen kuuluu testitapausten suunnittelu sekä toteutus, joiden lopputuloksena on uudelleenajettavia testitapauksia. Testaus keskittyy sovelluksen toiminnallisuuteen ja jättää tietokantaan päivitettävien tietojen tarkastamisen tekemättä. Testaus suoritetaan ilman tarkempaa tietoa sovelluksen sisäisestä toiminnasta. Testattava sovellus on Mobilding-hankkeessa toteutettu WWW-sovellus, jonka avulla hallinnoidaan rakennuksen elementtejä. Työssä vertaillaan WWW-sovelluksen käyttöliittymän testaukseen soveltuvia testauskehyksiä, ja pyritään tuomaan esille niiden ominaispiirteitä. Työn tuloksena on uudelleensuoritettavia testitapahtumia. Lisäksi pohditaan ohjelmointikäytäntöjä, joilla voidaan edistää automatisoitua testausta. Ohjelmointikäytännöt perustuvat työn toteutuksen aikana havaittuihin ongelmiin.

Oliopohjainen konenäkösovelluskehys

Monet teollisuuden konenäkö- ja hahmontunnistusongelmat ovat hyvin samantapaisia, jolloin prototyyppisovelluksia suunniteltaessa voitaisiin hyödyntää pitkälti samoja komponentteja. Oliopohjaiset sovelluskehykset tarjoavat erinomaisen tavan nopeuttaa ohjelmistokehitystä uudelleenkäytettävyyttä parantamalla. Näin voidaan sekä mahdollistaa konenäkösovellusten laajempi käyttö että säästää kustannuksissa. Tässä työssä esitellään konenäkösovelluskehys, joka on perusarkkitehtuuriltaan liukuhihnamainen. Ylätason rakenne koostuu sensorista, datankäsittelyoperaatioista, piirreirrottimesta sekä luokittimesta. Itse sovelluskehyksen lisäksi on toteutettu joukko kuvankäsittely- ja hahmontunnistusoperaatioita. Sovelluskehys nopeuttaa selvästi ohjelmointityötä ja helpottaa uusien kuvankäsittelyoperaatioiden lisää mistä.

E-Business Intreoperability Frameworks for SMEs

Current e-business standards have been developed and used by large organizations to reduce clerical costs in business transactions by increased automation and higher level of business-to-business integration. Small and medium enterprises (SME's), however, cannot easily adopt these standards due to the SME's lacking the technical expertise and resources for implementing them. Still, large organizations increasingly require their business partners, most of which are SME's, to be able to interoperate by their chosen e-business standards. The research question for the study was, first, which of the existing e-business technologies are most SME-adoptable, and, second, how could those e-business technologies be made easier for SME's to implement. The study was conducted as a literature study that evaluated the available e-business frameworks and SME-oriented e-business architectures based on the implementation complexity and costs incurred for the SME adopter. The study found that only few e-business solutions are SMEadoptable. The technological approaches used in the solutions need to be improved on a number of areas, the most important of which is implementation complexity. The study revealed that this also applies to the special, SME-oriented e-business architectures, which are also still too difficult for SME's to implement. Based on these findings, a high-level e-business interoperability framework concept was proposed as the basis for future research to overcome the found implementation complexities for SME's.

Promoting Programming Learning. Engagement, Automatic Assessment with Immediate Feedback in Visualizations

The skill of programming is a key asset for every computer science student. Many studies have shown that this is a hard skill to learn and the outcomes of programming courses have often been substandard. Thus, a range of methods and tools have been developed to assist students’ learning processes. One of the biggest fields in computer science education is the use of visualizations as a learning aid and many visualization based tools have been developed to aid the learning process during last few decades. Studies conducted in this thesis focus on two different visualizationbased tools TRAKLA2 and ViLLE. This thesis includes results from multiple empirical studies about what kind of effects the introduction and usage of these tools have on students’ opinions and performance, and what kind of implications there are from a teacher’s point of view. The results from studies in this thesis show that students preferred to do web-based exercises, and felt that those exercises contributed to their learning. The usage of the tool motivated students to work harder during their course, which was shown in overall course performance and drop-out statistics. We have also shown that visualization-based tools can be used to enhance the learning process, and one of the key factors is the higher and active level of engagement (see. Engagement Taxonomy by Naps et al., 2002). The automatic grading accompanied with immediate feedback helps students to overcome obstacles during the learning process, and to grasp the key element in the learning task. These kinds of tools can help us to cope with the fact that many programming courses are overcrowded with limited teaching resources. These tools allows us to tackle this problem by utilizing automatic assessment in exercises that are most suitable to be done in the web (like tracing and simulation) since its supports students’ independent learning regardless of time and place. In summary, we can use our course’s resources more efficiently to increase the quality of the learning experience of the students and the teaching experience of the teacher, and even increase performance of the students. There are also methodological results from this thesis which contribute to developing insight into the conduct of empirical evaluations of new tools or techniques. When we evaluate a new tool, especially one accompanied with visualization, we need to give a proper introduction to it and to the graphical notation used by tool. The standard procedure should also include capturing the screen with audio to confirm that the participants of the experiment are doing what they are supposed to do. By taken such measures in the study of the learning impact of visualization support for learning, we can avoid drawing false conclusion from our experiments. As computer science educators, we face two important challenges. Firstly, we need to start to deliver the message in our own institution and all over the world about the new – scientifically proven – innovations in teaching like TRAKLA2 and ViLLE. Secondly, we have the relevant experience of conducting teaching related experiment, and thus we can support our colleagues to learn essential know-how of the research based improvement of their teaching. This change can transform academic teaching into publications and by utilizing this approach we can significantly increase the adoption of the new tools and techniques, and overall increase the knowledge of best-practices. In future, we need to combine our forces and tackle these universal and common problems together by creating multi-national and multiinstitutional research projects. We need to create a community and a platform in which we can share these best practices and at the same time conduct multi-national research projects easily.

Early nutritional determinants in cardio-metabolic programming – A prospective randomized controlled dietary intervention study

Western societies have been faced with the fact that overweight, impaired glucose regulation and elevated blood pressure are already prevalent in pediatric populations. This will inevitably mean an increase in later manifestations of cardio-metabolic diseases. The dilemma has been suggested to stem from fetal life and it is surmised that the early nutritional environment plays an important role in the process called programming. The aim of the present study was to characterize early nutritional determinants associating with cardio-metabolic risk factors in fetuses, infants and children. Further, the study was designated to establish whether dietary counseling initiated in early pregnancy can modify this cascade. Healthy mother-child pairs (n=256) participating in a dietary intervention study were followed from early pregnancy to childhood. The intervention included detailed dietary counseling by a nutritionist targeting saturated fat intake in excess of recommendations and fiber consumption below recommendations. Cardio-metabolic programming was studied by characterizing the offspring’s cardio-metabolic risk factors such as over-activation of the autonomic nervous system, elevated blood pressure and adverse metabolic status (e.g. serum high split proinsulin concentration). Fetal cardiac sympathovagal activation was measured during labor. Postnatally, children’s blood pressure was measured at six-month and four-year follow-up visits. Further, infants’ metabolic status was assessed by means of growth and serum biomarkers (32-33 split proinsulin, leptin and adiponectin) at the age of six months. This study proved that fetal cardiac sympathovagal activity was positively associated with maternal pre-pregnancy body mass index indicating adverse cardio-metabolic programming in the offspring. Further, a reduced risk of high split proinsulin in infancy and lower blood pressure in childhood were found in those offspring whose mothers’ weight gain and amount and type of fats in the diet during pregnancy were as recommended. Of note, maternal dietary counseling from early pregnancy onwards could ameliorate the offspring’s metabolic status by reducing the risk of high split proinsulin concentration, although it had no effect on the other cardio-metabolic markers in the offspring. At postnatal period breastfeeding proved to entail benefits in cardio-metabolic programming. Finally, the recommended dietary protein and total fat content in the child’s diet were important nutritional determinants reducing blood pressure at the age of four years. The intrauterine and immediate postnatal period comprise a window of opportunity for interventions aiming to reduce the risk of cardio-metabolic disorders and brings the prospect of achieving health benefits over one generation.

Tool-supported invariant-based programming

The development of correct programs is a core problem in computer science. Although formal verification methods for establishing correctness with mathematical rigor are available, programmers often find these difficult to put into practice. One hurdle is deriving the loop invariants and proving that the code maintains them. So called correct-by-construction methods aim to alleviate this issue by integrating verification into the programming workflow. Invariant-based programming is a practical correct-by-construction method in which the programmer first establishes the invariant structure, and then incrementally extends the program in steps of adding code and proving after each addition that the code is consistent with the invariants. In this way, the program is kept internally consistent throughout its development, and the construction of the correctness arguments (proofs) becomes an integral part of the programming workflow. A characteristic of the approach is that programs are described as invariant diagrams, a graphical notation similar to the state charts familiar to programmers. Invariant-based programming is a new method that has not been evaluated in large scale studies yet. The most important prerequisite for feasibility on a larger scale is a high degree of automation. The goal of the Socos project has been to build tools to assist the construction and verification of programs using the method. This thesis describes the implementation and evaluation of a prototype tool in the context of the Socos project. The tool supports the drawing of the diagrams, automatic derivation and discharging of verification conditions, and interactive proofs. It is used to develop programs that are correct by construction. The tool consists of a diagrammatic environment connected to a verification condition generator and an existing state-of-the-art theorem prover. Its core is a semantics for translating diagrams into verification conditions, which are sent to the underlying theorem prover. We describe a concrete method for 1) deriving sufficient conditions for total correctness of an invariant diagram; 2) sending the conditions to the theorem prover for simplification; and 3) reporting the results of the simplification to the programmer in a way that is consistent with the invariantbased programming workflow and that allows errors in the program specification to be efficiently detected. The tool uses an efficient automatic proof strategy to prove as many conditions as possible automatically and lets the remaining conditions be proved interactively. The tool is based on the verification system PVS and i uses the SMT (Satisfiability Modulo Theories) solver Yices as a catch-all decision procedure. Conditions that were not discharged automatically may be proved interactively using the PVS proof assistant. The programming workflow is very similar to the process by which a mathematical theory is developed inside a computer supported theorem prover environment such as PVS. The programmer reduces a large verification problem with the aid of the tool into a set of smaller problems (lemmas), and he can substantially improve the degree of proof automation by developing specialized background theories and proof strategies to support the specification and verification of a specific class of programs. We demonstrate this workflow by describing in detail the construction of a verified sorting algorithm. Tool-supported verification often has little to no presence in computer science (CS) curricula. Furthermore, program verification is frequently introduced as an advanced and purely theoretical topic that is not connected to the workflow taught in the early and practically oriented programming courses. Our hypothesis is that verification could be introduced early in the CS education, and that verification tools could be used in the classroom to support the teaching of formal methods. A prototype of Socos has been used in a course at Åbo Akademi University targeted at first and second year undergraduate students. We evaluate the use of Socos in the course as part of a case study carried out in 2007.

Teaching mathematics and programming : new approaches with empirical evaluation

Programming and mathematics are core areas of computer science (CS) and consequently also important parts of CS education. Introductory instruction in these two topics is, however, not without problems. Studies show that CS students find programming difficult to learn and that teaching mathematical topics to CS novices is challenging. One reason for the latter is the disconnection between mathematics and programming found in many CS curricula, which results in students not seeing the relevance of the subject for their studies. In addition, reports indicate that students' mathematical capability and maturity levels are dropping. The challenges faced when teaching mathematics and programming at CS departments can also be traced back to gaps in students' prior education. In Finland the high school curriculum does not include CS as a subject; instead, focus is on learning to use the computer and its applications as tools. Similarly, many of the mathematics courses emphasize application of formulas, while logic, formalisms and proofs, which are important in CS, are avoided. Consequently, high school graduates are not well prepared for studies in CS. Motivated by these challenges, the goal of the present work is to describe new approaches to teaching mathematics and programming aimed at addressing these issues: Structured derivations is a logic-based approach to teaching mathematics, where formalisms and justifications are made explicit. The aim is to help students become better at communicating their reasoning using mathematical language and logical notation at the same time as they become more confident with formalisms. The Python programming language was originally designed with education in mind, and has a simple syntax compared to many other popular languages. The aim of using it in instruction is to address algorithms and their implementation in a way that allows focus to be put on learning algorithmic thinking and programming instead of on learning a complex syntax. Invariant based programming is a diagrammatic approach to developing programs that are correct by construction. The approach is based on elementary propositional and predicate logic, and makes explicit the underlying mathematical foundations of programming. The aim is also to show how mathematics in general, and logic in particular, can be used to create better programs.

Applications of graph transformation in tools for domain-specific modeling languages

The use of domain-specific languages (DSLs) has been proposed as an approach to cost-e ectively develop families of software systems in a restricted application domain. Domain-specific languages in combination with the accumulated knowledge and experience of previous implementations, can in turn be used to generate new applications with unique sets of requirements. For this reason, DSLs are considered to be an important approach for software reuse. However, the toolset supporting a particular domain-specific language is also domain-specific and is per definition not reusable. Therefore, creating and maintaining a DSL requires additional resources that could be even larger than the savings associated with using them. As a solution, di erent tool frameworks have been proposed to simplify and reduce the cost of developments of DSLs. Developers of tool support for DSLs need to instantiate, customize or configure the framework for a particular DSL. There are di erent approaches for this. An approach is to use an application programming interface (API) and to extend the basic framework using an imperative programming language. An example of a tools which is based on this approach is Eclipse GEF. Another approach is to configure the framework using declarative languages that are independent of the underlying framework implementation. We believe this second approach can bring important benefits as this brings focus to specifying what should the tool be like instead of writing a program specifying how the tool achieves this functionality. In this thesis we explore this second approach. We use graph transformation as the basic approach to customize a domain-specific modeling (DSM) tool framework. The contributions of this thesis includes a comparison of di erent approaches for defining, representing and interchanging software modeling languages and models and a tool architecture for an open domain-specific modeling framework that e ciently integrates several model transformation components and visual editors. We also present several specific algorithms and tool components for DSM framework. These include an approach for graph query based on region operators and the star operator and an approach for reconciling models and diagrams after executing model transformation programs. We exemplify our approach with two case studies MICAS and EFCO. In these studies we show how our experimental modeling tool framework has been used to define tool environments for domain-specific languages.