Economics of Power-to-Gas integration to wastewater treatment plant

Solar and wind power produce electricity irregularly. This irregular power production is problematic and therefore production can exceed the need. Thus sufficient energy storage solutions are needed. Currently there are some storages, such as flywheel, but they are quite short-term. Power-to-Gas (P2G) offers a solution to store energy as a synthetic natural gas. It also improves nation’s energy self-sufficiency. Power-to-Gas can be integrated to an industrial or a municipal facility to reduce production costs. In this master’s thesis the integration of Power-to-Gas technologies to wastewater treatment as a part of the VTT’s Neo-Carbon Energy project is studied. Power-to-Gas produces synthetic methane (SNG) from water and carbon dioxide with electricity. This SNG can be considered as stored energy. Basic wastewater treatment technologies and the production of biogas in the treatment plant are studied. The utilisation of biogas and SNG in heat and power production and in transportation is also studied. The integration of the P2G to wastewater treatment plant (WWTP) is examined mainly from economic view. First the mass flows of flowing materials are calculated and after that the economic impact based on the mass flows. The economic efficiency is evaluated with Net Present Value method. In this thesis it is also studied the overall profitability of the integration and the key economic factors.

Integrated energy storage tank for large scale power-to-gas applications

The global interest towards renewable energy production such as wind and solar energy is increasing, which in turn calls for new energy storage concepts due to the larger share of intermittent energy production. Power-to-gas solutions can be utilized to convert surplus electricity to chemical energy which can be stored for extended periods of time. The energy storage concept explored in this thesis is an integrated energy storage tank connected to an oxy-fuel combustion plant. Using this approach, flue gases from the plant could be fed directly into the storage tank and later converted into synthetic natural gas by utilizing electrolysis-methanation route. This work utilizes computational fluid dynamics to model the desublimation of carbon dioxide inside a storage tank containing cryogenic liquid, such as liquefied natural gas. Numerical modelling enables the evaluation of the transient flow patterns caused by the desublimation, as well as general fluid behaviour inside the tank. Based on simulations the stability of the cryogenic storage and the magnitude of the key parameters can be evaluated.

Power to Gas - sähköenergiasta luonnonkaasua, liiketoimintamahdollisuudet Suomessa

Uusiutuvan sähköntuotannon osuuden kasvaessa kasvaa tarve tasata sähköntuotannon ja kulutuksen vaihteluita varastoimalla sähköä. Power to Gas (PtG) - sähköenergiasta luonnonkaasua tarjoaa yhden mahdollisuuden varastoida sähköä. Sähköä käytetään veden elektrolyysiin, jossa syntynyt vety käytetään metanoinissa yhdessä hiilidioksidin kanssa muodostamaan korvaavaa luonnonkaasua. Näin syntynyttä korvaava luonnonkaasua sähköstä kutsutaan e-SNG-kaasuksi. Tässä työssä tutkitaan PtG-laitoksen investointi, käyttö- ja kunnossapitokuluja. Työssä luodaan laskentamalli, jolla lasketaan PtG-laitoksen neljälle käyttötapaukselle kannattavuuslaskelma. Käyttötapauksille lasketaan myös herkkyystarkasteluja. Kannattavuuslaskelmien perusteella päätellään PtG-laitoksen liiketoimintamahdollisuudet Suomessa. Työssä laskettujen kannattavuuslaskelmien perusteella PtG-laitoksen perustapausten liiketoimintamahdollisuudet ovat huonot. Laskettujen herkkyystarkastelujen perusteella havaittiin, että investointikulut, laitoksen ajoaika ja lisätulot hapesta ja lämmöstä ovat kannattavuuden kannalta kriittisimmät menestystekijät.

Carbon sources for Power-to-Gas applications in the Finnish energy system

This thesis is done as a part of the NEOCARBON project. The aim of NEOCARBON project is to study a fully renewable energy system utilizing Power-to-Gas or Power-to-Liquid technology for energy storage. Power-to-Gas consists of two main operations: Hydrogen production via electrolysis and methane production via methanation. Methanation requires carbon dioxide and hydrogen as a raw material. This thesis studies the potential carbon dioxide sources within Finland. The different sources are ranked using the cost and energy penalty of the carbon capture, carbon biogenity and compatibility with Power-to-Gas. It can be concluded that in Finland there exists enough CO2 point sources to provide national PtG system with sufficient amounts of carbon. Pulp and paper industry is single largest producer of biogenic CO2 in Finland. It is possible to obtain single unit capable of grid balancing operations and energy transformations via Power-to-Gas and Gas-to-Power by coupling biogas plants with biomethanation and CHP units.

Screening of power to gas projects

The purpose of this thesis was the screening of power to gas projects worldwide and reviewing the technologies used and applications for the end products. This study focuses solely on technical solutions and feasibility, economical profitability is excluded. With power grids having larger penetrations of intermittent sources such as solar and wind power, the demand and production cannot be balanced in conventional methods. Technologies for storing electric power in times of surplus production are needed, and the concept called power to gas is a solution for this problem. A total of 57 projects mostly located in Europe were reviewed by going through publications, presentations and project web pages. Hydrogen is the more popular end product over methane. Power to gas is a viable concept when power production from intermittent sources needs to be smoothed and time shifted, when carbon free fuels are produced for vehicles and when chemical industry needs carbon neutral raw materials.

Hiilidioksidin käsittely P2G prosessia varten

Power-to-Gas (P2G) tarkoittaa sähköenergian muuttamista kaasuksi. Kyse on konseptista, jossa uusiutuvaa energiaa varastoidaan kaasuun kemialliseksi energiaksi. Siinä tuotettava kaasu on joko vetyä tai metaania. Metanoinnissa muodostetaan hiilidioksidista ja vedystä kemiallisella prosessilla metaania, joka voidaan syöttää maakaasuverkkoon. Hiilidioksidin laadulle tässä prosessissa ei ole selkeitä ohjeita. Tässä työssä on tavoitteena selvittää miten hiilidioksidin laatu vaikuttaa metanointiprosessiin ja miten sitä tulee käsitellä tätä prosessia varten. Selvitetään myös mahdollisia hiilidioksidinkäsittelymenetelmiä, sekä lyhyesti talteenotto- ja kuljetustapojen vaikutuksia niihin. Esitetään kirjallisuudesta löytyviä arvioita hiilidioksidin käsittelyn kustannuksille.

Techno-Economic Assessment of LNG and Diesel Production and Global Trading Based on Hybrid PV-Wind Power Plants and PtG, GtL and PtL Technologies

With growing demand for liquefied natural gas (LNG) and liquid transportation fuels, and concerns about climate change and causes of greenhouse gas emissions, this master’s thesis introduces a new value chain design for LNG and transportation fuels and respective fundamental business cases based on hybrid PV-Wind power plants. The value chains are composed of renewable electricity (RE) converted by power-to-gas (PtG), gas-to-liquids (GtL) or power-to-liquids (PtL) facilities into SNG (which is finally liquefied into LNG) or synthetic liquid fuels, mainly diesel, respectively. The RE-LNG or RE-diesel are drop-in fuels to the current energy system and can be traded everywhere in the world. The calculations for the hybrid PV-Wind power plants, electrolysis, methanation (H2tSNG), hydrogen-to-liquids (H2tL), GtL and LNG value chain are performed based on both annual full load hours (FLh) and hourly analysis. Results show that the proposed RE-LNG produced in Patagonia, as the study case, is competitive with conventional LNG in Japan for crude oil prices within a minimum price range of about 87 - 145 USD/barrel (20 – 26 USD/MBtu of LNG production cost) and the proposed RE-diesel is competitive with conventional diesel in the European Union (EU) for crude oil prices within a minimum price range of about 79 - 135 USD/barrel (0.44 – 0.75 €/l of diesel production cost), depending on the chosen specific value chain and assumptions for cost of capital, available oxygen sales and CO2 emission costs. RE-LNG or RE-diesel could become competitive with conventional fuels from an economic perspective, while removing environmental concerns. The RE-PtX value chain needs to be located at the best complementing solar and wind sites in the world combined with a de-risking strategy. This could be an opportunity for many countries to satisfy their fuel demand locally. It is also a specific business case for countries with excellent solar and wind resources to export carbon-neutral hydrocarbons, when the decrease in production cost is considerably more than the shipping cost. This is a unique opportunity to export carbon-neutral hydrocarbons around the world where the environmental limitations on conventional hydrocarbons are getting tighter.

Lämmöntalteenottokattilan kehittäminen kaasumoottoreille ja teollisuuskaasuturbiineille

Tässä diplomityössä on kehitetty kustannustehokas lämmöntalteenottokattila savukaasun virtaukselle alle 150 kg/s. Kehitettävä kattila on luonnonkiertoinen ja pystyrakenteinen. Valitun kattilatyypin etuja muihin kattilatyyppeihin nähden on tarkasteltu. Erityistä huomiota kattilassa on kiinnitetty vedenkäsittelyn yksinkertaistamiseen. Tämä on saavutettu tulistinratkaisulla, jonka säätötarve on vähäinen. Tuorehöyryn lämpötilan säätöön käytettyjä säätömenetelmiä on tarkasteltu ja eri tulistinratkaisuja käyttämällä saavutettavia tuorehöyrymääriä ja säätötarvetta on tutkittu simulointiohjelmaa hyväksi käyttäen. Tulistinratkaisun lisäksi työssä on tarkasteltu syöttöveden käyttöä ulkoiseen lämmitykseen sekä lämmönsiirrinpakettien tuentaa. Lisäpolton toteutusta sekä syöttövesiventtiilin sijoittamista ja syöttövesipumpun valintaa on myös tarkasteltu. Osana työtä on lisäksi tehty kehitettyä kattilaa varten mitoitusohjelma ja mitoitettu sitä käyttäen esimerkkilaitos.

Lisäpoltolla varustetun maakaasukombivoimalaitoksen optimointi.

Voimalaitoksen sisäisellä optimoinnilla pyritään parantamaan prosessia ja lisäämään voimalaitoskonseptin kilpailukykyä energiamarkkinoilla. Tässä työssä optimoitiin lisäpoltolla varustettua, sähköteholtaan noin 125 MW:n maakaasukompivoimalaitosta. Työ on osa Fortum Engineering Oy:n konseptikehitysohjelmaa. Kaasuturbiinin savukaasun sisältämää happea voidaan hyödyntää lämmöntal-teenottokattilan savukaasukanavaan sijoitetussa lisäpoltossa. Lisäpoltolla saadaan nostettua savukaasun lämpötilaa ja lisättyä tuotetun tuorehöyryn määrää. Työssä tutkittiin lisäpolton kannattavuutta ja sen vaikutusta voimalaitoksen mitoitukseen. Lisäpolton lämpötila valitaan teknisten rajoitusten perusteella, jolloin siitä aiheutuvat investointikustannukset eivät nouse merkittäviksi. Optimointimenetelmä pohjautuu Fortum Oyj:ssä kehitetyllä voimalaitossimulaattori Solvolla laskettujen lämpötaseiden ja asiantuntija-arvioihin perustuvien investointikustannuskaavojen käyttöön. Taloudelliset lähtöarvot on valittu Itä-Euroopan markkinatilanteen mukaisiksi. Kannattavuuslaskelmat perustuvat nykyarvomenetelmään, jossa investointikustannuksille ja sähkön ja kaukolämmön myynnistä saaduille tuotoille lasketaan nykyarvo. Teknisten rajoitusten puitteissa suurimman nykyarvon antava tapaus on aina kunkin tutkittavan prosessisuureen optimitapaus. Tutkittavia prosessisuureita voivat olla esimerkiksi tuorehöyryn tila-arvot. Eräs työn tavoitteista oli selvittää lämmöntalteenottokattilan painetasojen optimaalinen lukumäärä. Lisäpoltto todettiin lämmitysvoimalaitoksella kannattavaksi ratkaisuksi kun nyt optimoitua laitosta verrattiin ilman lisäpolttoa mitoitettuun vastaavanlaiseen laitokseen. Kannattavuuslaskelmille tehtiin herkkyystarkastelut, joiden avulla tutkittiin mitoitetun konseptin herkkyyttä taloudellisten lähtöarvojen muutoksille. Herkkyysanalyysin avulla optimoitua voimalaitoskonseptia voidaan hyödyntää suuremmalla taloudellisten lähtöarvojen vaihteluvälillä.

Applying Active Front End To Multilevel Inverter

The aim of this work was to make an active front end from IGBTs for a multilevel inverter. The work was done for Mosart II, a long term still ongoing Vacon Oyj project. The purpose of the AFE is to balance the DC-voltage and to put the returning power back to the grid instead of the breaking chopper and the capacitor. With a diode rectifier the bridge only allows power to pass in one direction and the switching times are not controllable. That means the rectifier always takes the highest phase and the phases are always conducting the same 120◦. With an AFE it is possible to actively change the rectifiers switching pattern. A diode bridge also generates much greater losses than an IGBT bridge. With these arguments it is rational to start researching the possibility of an AFE in a multilevel inverter.

Optimal trading of wind power in the short term market

The energy reform, which is happening all over the world, is caused by the common concern of the future of the humankind in our shared planet. In order to keep the effects of the global warming inside of a certain limit, the use of fossil fuels must be reduced. The marginal costs of the renewable sources, RES are quite high, since they are new technology. In order to induce the implementation of RES to the power grid and lower the marginal costs, subsidies were developed in order to make the use of RES more profitable. From the RES perspective the current market is developed to favor conventional generation, which mainly uses fossil fuels. Intermittent generation, like wind power, is penalized in the electricity market since it is intermittent and thus diffi-cult to control. Therefore, the need of regulation and thus the regulation costs to the producer differ, depending on what kind of generation market participant owns. In this thesis it is studied if there is a way for market participant, who has wind power to use the special characteristics of electricity market Nord Pool and thus reach the gap between conventional generation and the intermittent generation only by placing bids to the market. Thus, an optimal bid is introduced, which purpose is to minimize the regulation costs and thus lower the marginal costs of wind power. In order to make real life simulations in Nord Pool, a wind power forecast model was created. The simulations were done in years 2009 and 2010 by using a real wind power data provided by Hyötytuuli, market data from Nord Pool and wind forecast data provided by Finnish Meteorological Institute. The optimal bid needs probability intervals and therefore the methodology to create probability distributions is introduced in this thesis. In the end of the thesis it is shown that the optimal bidding improves the position of wind power producer in the electricity market.

Development of a measuring-control system for energy monitoring in low power

In this thesis a control system for an intelligent low voltage energy grid is presented, focusing on the control system created by using a multi-agent approach which makes it versatile and easy to expand according to the future needs. The control system is capable of forecasting the future energy consumption and decisions making on its own without human interaction when countering problems. The control system is a part of the St. Petersburg State Polytechnic University’s smart grid project that aims to create a smart grid for the university’s own use. The concept of the smart grid is interesting also for the consumers as it brings new possibilities to control own energy consumption and to save money. Smart grids makes it possible to monitor the energy consumption in real-time and to change own habits to save money. The intelligent grid also brings possibilities to integrate the renewable energy sources to the global or the local energy production much better than the current systems. Consumers can also sell their extra power to the global grid if they want.

Porous silicon optical filters in gas sensing applications

In this thesis, the gas sensing properties of porous silicon-based thin-film optical filters are explored. The effects of surface chemistry on the adsorption and desorption of various gases are studied in detail. Special emphasis is placed on investigating thermal carbonization as a stabilization method for optical sensing applications. Moreover, the possibility of utilizing the increased electrical conductivity of thermally carbonized porous silicon for implementing a multiparametric gas sensor, which would enable simultaneous monitoring of electrical and optical parameters, is investigated. In addition, different porous silicon-based optical filter-structures are prepared, and their properties in sensing applications are evaluated and compared. First and foremost, thermal carbonization is established as a viable method to stabilize porous silicon optical filters for chemical sensing applications. Furthermore, a multiparametric sensor, which can be used for increasing selectivity in gas sensing, is also demonstrated. Methods to improve spectral quality in multistopband mesoporous silicon rugate filters are studied, and structural effects to gas sorption kinetics are evaluated. Finally, the stability of thermally carbonized optical filters in basic environments is found to be superior in comparison to other surface chemistries currently available for porous silicon. The results presented in this thesis are of particular interest for developing novel reliable sensing systems based on porous silicon, e.g., label-free optical biosensors.

Valtaa eurokansalle : miten Euroopan unionin demokratiavaje voidaan poistaa?

Abstract: Power to the eurodemos : how to cure the democratic deficit in the EU

Toimeenpanovallan käytöstä ongelmien hallintaan

English summary: From executive power to public governance (s.1276-1277)