Implementation of educational change in Finland: The case of the undivided basic education reform

For the past decades, educational large-scale reforms have been elaborated and implemented in many countries and often resulted in partial or complete failure. These results brought researchers to study policy processes in order to address this particular challenge. Studies on implementation processes brought to light an existing causal relationship between the implementation process and the effectiveness of a reform. This study aims to describe the implementation process of educational change in Finland, who produced efficient educational reforms over the last 50 years. The case study used for the purpose of this study is the national reform of undivided basic education (yhtenäinen peruskoulu) implemented in the end of the 1990s. Therefore, this research aims to describe how the Finnish undivided basic education reform was implemented. This research was carried out using a pluralist and structuralist approach of policy process and was analyzed according to the hybrid model of implementation process. The data were collected using a triangulation of methods, i.e. documentary research, interviews and questionnaires. The data were qualitative and were analyzed using content analysis methods. This study concludes that the undivided basic education reform was applied in a very decentralized manner, which is a reflection of the decentralized system present in Finland. Central authorities provided a clear vision of the purpose of the reform, but did not control the implementation process. They rather provided extensive support in the form of transmission of information and development of collaborative networks. Local authorities had complete autonomy in terms of decision-making and implementation process. Discussions, debates and decisions regarding implementation processes took place at the local level and included the participation of all actors present on the field. Implementation methods differ from a region to another, with is the consequence of the variation of the level of commitment of local actors but also the diversity of local realities. The reform was implemented according to existing structures and values, which means that it was in cohesion with the context in which it was implemented. These results cannot be generalized to all implementation processes of educational change in Finland but give a great insight of what could be the model used in Finland. Future studies could intent to confirm the model described here by studying other reforms that took place in Finland.

Implementation of educational change in Finland: The case of the undivided basic education reform

For the past decades, educational large-scale reforms have been elaborated and implemented in many countries and often resulted in partial or complete failure. These results brought researchers to study policy processes in order to address this particular challenge. Studies on implementation processes brought to light an existing causal relationship between the implementation process and the effectiveness of a reform. This study aims to describe the implementation process of educational change in Finland, who produced efficient educational reforms over the last 50 years. The case study used for the purpose of this study is the national reform of undivided basic education (yhtenäinen peruskoulu) implemented in the end of the 1990s. Therefore, this research aims to describe how the Finnish undivided basic education reform was implemented. This research was carried out using a pluralist and structuralist approach of policy process and was analyzed according to the hybrid model of implementation process. The data were collected using a triangulation of methods, i.e. documentary research, interviews and questionnaires. The data were qualitative and were analyzed using content analysis methods. This study concludes that the undivided basic education reform was applied in a very decentralized manner, which is a reflection of the decentralized system present in Finland. Central authorities provided a clear vision of the purpose of the reform, but did not control the implementation process. They rather provided extensive support in the form of transmission of information and development of collaborative networks. Local authorities had complete autonomy in terms of decision-making and implementation process. Discussions, debates and decisions regarding implementation processes took place at the local level and included the participation of all actors present on the field. Implementation methods differ from a region to another, with is the consequence of the variation of the level of commitment of local actors but also the diversity of local realities. The reform was implemented according to existing structures and values, which means that it was in cohesion with the context in which it was implemented. These results cannot be generalized to all implementation processes of educational change in Finland but give a great insight of what could be the model used in Finland. Future studies could intent to confirm the model described here by studying other reforms that took place in Finland.

A Local DLP-GIS-LP system for geographically decentralized wood procurement planning and decision making

Summary

Operational Reliability Analysis of a Three-Tiered Thin-Client ERP-system in an International Corporate Environment

Internationalization and the following rapid growth have created the need to concentrate the IT systems of many small-to-medium-sized production companies. Enterprise Resource Planning systems are a common solution for such companies. Deployment of these ERP systems consists of many steps, one of which is the implementation of the same shared system at all international subsidiaries. This is also one of the most important steps in the internationalization strategy of the company from the IT point of view. The mechanical process of creating the required connections for the off-shore sites is the easiest and most well-documented step along the way, but the actual value of the system, once operational, is perceived in its operational reliability. The operational reliability of an ERP system is a combination of many factors. These factors vary from hardware- and connectivity-related issues to administrative tasks and communication between decentralized administrative units and sites. To accurately analyze the operational reliability of such system, one must take into consideration the full functionality of the system. This includes not only the mechanical and systematic processes but also the users and their administration. All operational reliability in an international environment relies heavily on hardware and telecommunication adequacy so it is imperative to have resources dimensioned with regard to planned usage. Still with poorly maintained communication/administration schemes no amount of bandwidth or memory will be enough to maintain a productive level of reliability. This thesis work analyzes the implementation of a shared ERP system to an international subsidiary of a Finnish production company. The system is Microsoft Dynamics Ax, currently being introduced to a Slovakian facility, a subsidiary of Peikko Finland Oy. The primary task is to create a feasible base of analysis against which the operational reliability of the system can be evaluated precisely. With a solid analysis the aim is to give recommendations on how future implementations are to be managed.

Particle detector link system modifications in RE1/1 sector

The large hadron collider constructed at the European organization for nuclear research, CERN, is the world’s largest single measuring instrument ever built, and also currently the most powerful particle accelerator that exists. The large hadron collider includes six different experiment stations, one of which is called the compact muon solenoid, or the CMS. The main purpose of the CMS is to track and study residue particles from proton-proton collisions. The primary detectors utilized in the CMS are resistive plate chambers (RPCs). To obtain data from these detectors, a link system has been designed. The main idea of the link system is to receive data from the detector front-end electronics in parallel form, and to transmit it onwards in serial form, via an optical fiber. The system is mostly ready and in place. However, a problem has occurred with innermost RPC detectors, located in sector labeled RE1/1; transmission lines for parallel data suffer from signal integrity issues over long distances. As a solution to this, a new version of the link system has been devised, a one that fits in smaller space and can be located within the CMS, closer to the detectors. This RE1/1 link system has been so far completed only partially, with just the mechanical design and casing being done. In this thesis, link system electronics for RE1/1 sector has been designed, by modifying the existing link system concept to better meet the requirements of the RE1/1 sector. In addition to completion of the prototype of the RE1/1 link system electronics, some testing for the system has also been done, to ensure functionality of the design.

The functional fit between collaborative software and work systems:Qualification of work system needs to software functionality

The study develops an approach that tries to validate software functionality to work systems needs in SMEs. The formulated approach is constructed by using a SAAS based software i.e., work collaboration service (WCS), and SMEs as the elements of study. Where the WCS’s functionality is qualified to the collaboration needs that exist in operational and project work within SMEs. For this research constructivist approach and case study method is selected because the nature of the current study requires an in depth study of the work collaboration service as well as a detailed study of the work systems within different enterprises. Four different companies are selected in which fourteen interviews are conducted to gather data pertaining. The work systems method and framework are used as a central part of the approach to collect, analyze and interpret the enterprises work systems model and the underlying collaboration needs on operational and project work. On the other hand, the functional model of the WCS and its functionality is determined from functional model analysis, software testing, documentation and meetings with the service vendor. The enterprise work system model and the WCS model are compared to reveal how work progression differs between the two and make visible unaddressed stages of work progression. The WCS functionality is compared to work systems collaboration needs to ascertain if the service will suffice the needs of the project and operational work under study. The unaddressed needs provide opportunities to improve the functionality of the service for better conformity to the needs of enterprise and work. The results revealed that the functional models actually differed in how operational and project work progressed within the stages. WCS shared similar stages of work progression apart from the stages of identification and acceptance, and progress and completion stages were only partially addressed. Conclusion is that the identified unaddressed needs such as, single point of reference, SLA and OLA inclusion etc., should be implemented or improved within the WCS at appropriate stages of work to gain better compliance of the service to the needs of the enterprise an work itself. The developed approach can hence be used to carry out similar analysis for the conformance of pre-built software functionality to work system needs with SMEs.