Bus bar aeolian vibration field tests

Large amplitude bus bar aeolian vibration may lead to post insulator damage. Different damping applications are used to decrease the risk of large amplitude aeolian vibration. In this paper the post insulator load caused by the bus bar aeolian vibration and the effect of damping methods are evaluated. The effects of three types of bus bar connectors and three types of primary structures are studied. Two actual damping devices, damping cable and their combinations are studied. The post insulator loads are studied with strain gage based custom made force sensors installed on the both ends of the post insulator and with the displacement sensor installed on the midpoint of the bus bar. The post insulator loads are calculated from the strain values and the damping properties are determined from the displacement history. The bus bar is deflected with a hanging weight. The weight is released and the bus bar is left to free damped vibration. Both actual bus bar vibration dampers RIBE and SBI were very effective against the aeolian vibration. Combining vibration damper with damping cable will increase the damping ratio but it may be unnecessary considering the extra effort. Bus bar connector type or primary structure have no effect on the vertical load. The bending moment at the post insulator with double sided bus bar connector is significantly higher than at the post insulator with single sided bus bar connector. No reliable conclusions about bus bar connector type effect can be done, but the roller bearing type or central bearing type connector may reduce the bending moment. The RHS steel frame as primary structure may increase the bending moment peak values since it is the least rigid primary structure type and it may start to vibrate as a response to the awakening force of the vibrating bus bar.

Fatigue analysis of brackets with and without scallop for bridge and other deck structure using effective notch stress.

Due to functional requirement of a structural detail brackets with and without scallop are frequently used in bridges, decks, ships and offshore structure. Scallops are designed to serve as passage way for fluids, to reduce weld length and plate distortions. Moreover, scallops are used to avoid intersection of two or more welds for the fact that there is the presence of inventible inherent initial crack except for full penetrated weld and the formation of multi-axial stress state at the weld intersection. Welding all around the scallop corner increase the possibility of brittle fracture even for the case the bracket is not loaded by primary load. Avoiding of scallop will establish an initial crack in the corner if bracket is welded by fillet welds. If the two weld run pass had crossed, this would have given a 3D residual stress situation. Therefore the presences and absence of scallop necessitates the 3D FEA fatigue resistance of both types of brackets using effective notch stress approach ( ). FEMAP 10.1 with NX NASTRAN was used for the 3D FEA. The first and main objective of this research was to investigate and compare the fatigue resistance of brackets with and without scallop. The secondary goal was the fatigue design of scallops in case they cannot be avoided for some reason. The fatigue resistance for both types of brackets was determined based on approach using 1 mm fictitiously rounded radius based on IIW recommendation. Identical geometrical, boundary and loading conditions were used for the determination and comparison of fatigue resistance of both types of brackets using linear 3D FEA. Moreover the size effect of bracket length was also studied using 2D SHELL element FEA. In the case of brackets with scallop the flange plate weld toe at the corner of the scallop was found to exhibit the highest and made the flange plate weld toe critical for fatigue failure. Whereas weld root and weld toe at the weld intersections were the highly stressed location for brackets without scallop. Thus weld toe for brackets with scallop, and weld root and weld toe for brackets without scallop were found to be the critical area for fatigue failure. Employing identical parameters on both types of brackets, brackets without scallop had the highest except for full penetrated weld. Furthermore the fatigue resistance of brackets without scallop was highly affected by the lack of weld penetration length and it was found out that decreased as the weld penetration was increased. Despite the fact that the very presence of scallop reduces the stiffness and also same time induce stress concentration, based on the 3D FEA it is worth concluding that using scallop provided better fatigue resistance when both types of brackets were fillet welded. However brackets without scallop had the highest fatigue resistance when full penetration weld was used. This thesis also showed that weld toe for brackets with scallop was the only highly stressed area unlike brackets without scallop in which both weld toe and weld root were the critical locations for fatigue failure when different types of boundary conditions were used. Weld throat thickness, plate thickness, scallop radius, lack of weld penetration length, boundary condition and weld quality affected the fatigue resistance of both types of brackets. And as a result, bracket design procedure, especially welding quality and post weld treatment techniques significantly affect the fatigue resistance of both type of brackets.

Influence of Link Structure on Search Engine Result Pages of Online Nursery Shops

The primary objective of this thesis is to assess how the backlink portfolio structure and off site Search Engine Optimisation (SEO) elements influence ranking of UK based online nursery shops. The growth of the internet use demanded significant effort from companies to optimize and increase their online presence in order to cope with the increasing online competition. The new e-Commerce technology - called Search Engine Optimisation - has been developed that helped increase website visibility of companies. The SEO process involves on site elements (i.e. changing the parameters of the company's website such as keywords, title tags and meta descriptions) and off site elements (link building and social media marketing activity). Link Building is based on several steps of marketing planning including keyword research and competitor analysis. The underlying goal of keyword research is to understand the targeted market through identifying relevant keyword queries that are used by targeted costumer group. In the analysis, three types (geographic, field and company’s strategy related) and seven sources of keywords has been identified and used as a base of analysis. Following the determination of the most popular keywords, allinanchor and allintitle search has been conducted and the first ten results of the searches have been collected to identify the companies with the most significant web presence among the nursery shops. Finally, Link Profiling has been performed where the essential goal was to understand to what extent other companies' link structure is different that the base company's backlinks. Significant difference has been found that distinguished the top three companies ranking in the allinanchor and allintitle search. The top three companies, „Mothercare”, „Mamas and Papas” and „Kiddicare” maintained significantly better metrics regarding domain and page authority on the main landing pages, the average number of outbound links for link portfolio metric and in number of backlinks. These companies also ranked among the highest in page authority distribution and followed external linking.

The Structure and Function of αI Domains in Collagen Receptor and Leukocyte Integrins

Integrins are heterodimeric, signaling transmembrane adhesion receptors that connect the intracellular actin microfilaments to the extracellular matrix composed of collagens and other matrix molecules. Bidirectional signaling is mediated via drastic conformational changes in integrins. These changes also occur in the integrin αI domains, which are responsible for ligand binding by collagen receptor and leukocyte specific integrins. Like intact integrins, soluble αI domains exist in the closed, low affinity form and in the open, high affinity form, and so it is possible to use isolated αI domains to study the factors and mechanisms involved in integrin activation/deactivation. Integrins are found in all mammalian tissues and cells, where they play crucial roles in growth, migration, defense mechanisms and apoptosis. Integrins are involved in many human diseases, such as inflammatory, cardiovascular and metastatic diseases, and so plenty of effort has been invested into developing integrin specific drugs. Humans have 24 different integrins, four of which are collagen receptor (α1β1, α2β1, α10β1, α11β1) and five leukocyte specific integrins (αLβ2, αMβ2, αXβ2, αDβ2, αEβ7). These two integrin groups are quite unselective having both primary and secondary ligands. This work presents the first systematic studies performed on these integrin groups to find out how integrin activation affects ligand binding and selectivity. These kinds of studies are important not only for understanding the partially overlapping functions of integrins, but also for drug development. In general, our results indicated that selectivity in ligand recognition is greatly reduced upon integrin activation. Interestingly, in some cases the ligand binding properties of integrins have been shown to be cell type specific. The reason for this is not known, but our observations suggest that cell types with a higher integrin activation state have lower ligand selectivity, and vice versa. Furthermore, we solved the three-dimensional structure for the activated form of the collagen receptor α1I domain. This structure revealed a novel intermediate conformation not previously seen with any other integrin αI domain. This is the first 3D structure for an activated collagen receptor αI domain without ligand. Based on the differences between the open and closed conformation of the αI domain we set structural criteria for a search for effective collagen receptor drugs. By docking a large number of molecules into the closed conformation of the α2I domain we discovered two polyketides, which best fulfilled the set structural criteria, and by cell adhesion studies we showed them to be specific inhibitors of the collagen receptor integrins.

Possibility of press forming wood films into primary packaging

In recent times the packaging industry is finding means to maximize profit. Wood used to be the most advantageous and everyday material for packaging, worktables, counters, constructions, interiors, tools and as materials and utensils in the food companies in the world. The use of wood has declined vigorously, and other materials like plastic, ceramic, stainless steel, concrete, and aluminum have taken its place. One way that the industry could reduce its cost is by finding possibilities of using wood for primary packaging after which it can be safely recycled or burned as a carbon source for energy. Therefore, the main objective of this thesis is to investigate the possibility of press-forming a wood film into primary packaging. In order to achieve the stated objectives, discussion on major characteristics of wood in terms of structure, types and application were studied. Two different wood species, pine and birch were used for the experimental work. These were provided by a local carpentry workshop in Lappeenranta and a workshop in Ruokolahti supervised by Professor Timo Kärki. Laboratory tests were carried out at Lappeenranta University of Technology FMS workshop on Stenhøj EPS40 M hydraulic C-frame press coupled with National Instruments VI Logger and on the Adjustable packaging line machine at LUT Packaging laboratory. The tests succeeded better on the LUT packaging line than on the Stenhoj equipment due to the integrated heating system in the machine. However, there is much work to be done before the quality of a tray produced from the wood film is comparable to that of the wood plastic composite tray.

Institutional environment in North Korea: market structure and overcoming institutional voids

Tutkimus sai innoituksensa, kun tutkija huomasi tarpeen liiketaloudelliselle, ajantasaiselle ja realistiselle tutkimukselle Pohjois-Korean markkinoista, joka kuvailisi markkinoiden olemassaolevia ja puuttuvia rakenteita sekä tutkisi mahdollisuuksia ylittää puuttuvat rakenteet. Institutionaalinen teoria valittiin sopivaksi viitekehykseksi kuvailla ja tutkia markkinarakennetta. Tutkimuskysymys muotoiltiin seuraavasti: “Miten ulkomaiset yritykset voivat reagoida puuttuviin markkinarakenteisiin Pohjois-Koreassa?”. Tutkimuskysymys jaettiin kolmeen osakysymykseen: (1) Millainen on Pohjois-Korean markkinoiden institutionaalinen ympäristö? (2) Mitkä ovat merkittävimmät puuttuvat markkinarakenteet Pohjois-Koreassa? (3) Mitä mahdollisuuksia ulkomaisilla yrityksillä voisi olla reagoida puuttuviin markkinarakenteisiin? Tutkimus toteutettiin kvalitatiivisena, koska tutkimuskysymys on deskriptiivinen. Aineisto kerättiin asiantuntijahaastattelun ja kvalitatiivisen sisällönanalyysin keinoin. Primääriaineiston muodostavat 2 asiantuntijahaastattelua ja sekundääriaineiston muodostavat 95 artikkelia, jotka kerättiin 40 lähteestä. Aineisto analysoitiin kvalitatiivisen sisällönanalyysin keinoin. Aineisto koodattiin, luokiteltiin ja esitettiin kokonaisuuksina luokittelurungon avulla, joka laadittiin tutkimusta varten muodostetun teoreettisen viitekehyksen mukaan. Tulokset ja johtopäätökset voidaan tiivistää seuraavasti. (1) Pohjois-Korean markkinan instituutioihin vaikuttaa kaksoisrakenne, jossa muodollinen, sosialistinen rakenne ja epämuodollinen, markkinalähtöinen rakenne toimivat päällekkäin. (2) Puuttuvia rakenteita on sekä markkinan kontekstissa että markkinatasolla. Puutteet ovat osittain seurausta vanhojen rakenteiden korvaantumisesta uusilla, jotka eivät ole institutionalisoituneet. (3) Yritykset voivat käyttää samoja mahdollisuuuksia reagoida puuttuviin markkinarakenteisiin Pohjois-Koreassa, joita kehittyvien markkinoiden yhteydessä on esitetty. Sen tulkittiin vähentävän käsitystä, jonka mukaan Pohjois-Korean markkina on liian erikoinen yritystoiminnalle. (4) Kasvava keskiluokka sekä yrittäjyyden ja naisten yhä merkittävämpi rooli liike-elämässä aiheuttavat alhaalta ylöspäin suuntautuvaa kehitystä markkinoilla. Nämä ovat merkkejä viimeaikaisesta kehityksestä, jotka eivät ole saaneet laajaa huomiota länsimaisessa mediassa. Se korostaa tarvetta liiketaloudelliselle, ajantasaiselle jatkotutkimukselle Pohjois-Korean markkinoista.

Institutional environment in North Korea: market structure and overcoming institutional voids

The research was sparked by an exchange in South Korea, as the author identified a gap in research that provides economic, up to date and realistic information about the North Korean market in English language. A need for a research was identified that would describe the market’s existing and missing market structures and explore possibilities to overcome the missing market structures. Institutional theory was chosen as a suitable framework to describe and explore the market. The research question was formulated as follows: “How can foreign companies overcome institutional voids in the North Korean market?”. To answer the research question, it was divided into three sub-questions as follows: (1) What is the institutional environment in North Korea like? (2) What are the major institutional voids in the North Korean market? (3) What possibilities do foreign companies have to overcome institutional voids? The research is qualitative by nature due to the descriptive and exploratory nature of the research question. Data collection consisted of expert interview and content analysis, resulting in primary data of two interviews and secondary data of 95 articles from 40 different sources. The data was analyzed with the systematical technique of content analysis. The data was coded, classified and presented as concepts with the help of a classification system that was build following the theoretical framework adapted for this study. The findings can be summarized as follows. (1) The market institutions are characterized by an overlapping dual system of formal, socialist structures and informal, market-oriented structures. (2) Institutional voids prevail on both the market’s contextual and on the market level. They are partly result of old institutions being replaced by new institutions that lack institutionalization. (3) Identified possibilities to overcome institutional voids correspond with possibilities drawn from previous research. This decreases the image of North Korea as an impossibly unique market to operate in. (4) Emerging middle class, rapidly growing entrepreneurial activities and women’s increasing role in business drive a down-to-up change in the market. This signals the recent development of the market, yet has been overlooked in the Western media. Thus there is a need for further economic, up to date research concerning North Korea.