Fatigue analysis of brackets with and without scallop for bridge and other deck structure using effective notch stress.

Due to functional requirement of a structural detail brackets with and without scallop are frequently used in bridges, decks, ships and offshore structure. Scallops are designed to serve as passage way for fluids, to reduce weld length and plate distortions. Moreover, scallops are used to avoid intersection of two or more welds for the fact that there is the presence of inventible inherent initial crack except for full penetrated weld and the formation of multi-axial stress state at the weld intersection. Welding all around the scallop corner increase the possibility of brittle fracture even for the case the bracket is not loaded by primary load. Avoiding of scallop will establish an initial crack in the corner if bracket is welded by fillet welds. If the two weld run pass had crossed, this would have given a 3D residual stress situation. Therefore the presences and absence of scallop necessitates the 3D FEA fatigue resistance of both types of brackets using effective notch stress approach ( ). FEMAP 10.1 with NX NASTRAN was used for the 3D FEA. The first and main objective of this research was to investigate and compare the fatigue resistance of brackets with and without scallop. The secondary goal was the fatigue design of scallops in case they cannot be avoided for some reason. The fatigue resistance for both types of brackets was determined based on approach using 1 mm fictitiously rounded radius based on IIW recommendation. Identical geometrical, boundary and loading conditions were used for the determination and comparison of fatigue resistance of both types of brackets using linear 3D FEA. Moreover the size effect of bracket length was also studied using 2D SHELL element FEA. In the case of brackets with scallop the flange plate weld toe at the corner of the scallop was found to exhibit the highest and made the flange plate weld toe critical for fatigue failure. Whereas weld root and weld toe at the weld intersections were the highly stressed location for brackets without scallop. Thus weld toe for brackets with scallop, and weld root and weld toe for brackets without scallop were found to be the critical area for fatigue failure. Employing identical parameters on both types of brackets, brackets without scallop had the highest except for full penetrated weld. Furthermore the fatigue resistance of brackets without scallop was highly affected by the lack of weld penetration length and it was found out that decreased as the weld penetration was increased. Despite the fact that the very presence of scallop reduces the stiffness and also same time induce stress concentration, based on the 3D FEA it is worth concluding that using scallop provided better fatigue resistance when both types of brackets were fillet welded. However brackets without scallop had the highest fatigue resistance when full penetration weld was used. This thesis also showed that weld toe for brackets with scallop was the only highly stressed area unlike brackets without scallop in which both weld toe and weld root were the critical locations for fatigue failure when different types of boundary conditions were used. Weld throat thickness, plate thickness, scallop radius, lack of weld penetration length, boundary condition and weld quality affected the fatigue resistance of both types of brackets. And as a result, bracket design procedure, especially welding quality and post weld treatment techniques significantly affect the fatigue resistance of both type of brackets.

Delivery, Outcome, and Costs of Orthodontic Care in Finnish Health Centres

The goal of the study was to analyse orthodontic care in Finnish health centres with special reference to the delivery, outcome and costs of treatment. Public orthodontic care was studied by two questionnaires sent to the chief dental officers of all health centres (n = 276) and to all specialist orthodontists in Finland (n = 146). The large regional variation was mentioned by the orthodontists as the most important factor requiring improvement. Orthodontic practices and outcome were studied in eight Finnish municipal health centres representing early and late timing of treatment. A random sample of 16- and 18-year-olds (n = 1109) living in these municipalities was examined for acceptability of occlusion with the Occlusal Morphology and Function Index (OMFI). In acceptability of occlusion, only minor differences were found between the two timing groups. The percentage of subjects with acceptable morphology was higher among untreated than among treated adolescents. The costs of orthodontic care were estimated among the adolescents with a treatment history. The mean appliance costs were higher in the late, and the mean visit costs higher in the early timing group. The cost-effectiveness of orthodontic services differed among the health centres, but was almost equal in the two timing groups. National guidelines and delegation of orthodontic tasks were suggested as the tools for reducing the variation among the health centres. In the eight health centres, considerable variation was found in acceptability of occlusion and in cost-effectiveness of services. The cost-effectiveness was not directly connected with the timing of treatment.

Abnormal Returns of Dividend Announcements during a Boom and a Recession. Empirical Evidence from U.S. from the years of 2000 - 2002 and 2005 - 2007, including Finnish Extra Dividends

This study examines the short time price effect of dividend announcements during a boom and a recession. The data being used here is gathered from the years of 2000 - 2002 when it was a recession after the techno bubble burst and from the years 2005 - 2007 when investors experienced large capital gains all around the world. The data consists of dividend increases and intact observations. The aim is to find out differences in abnormal returns between a boom and a recession. Second, the study examines differences between different dividend yield brackets. Third, Finnish extra dividends, mainly being delivered to shareholders in 2004 are included to the empirical test. Generally stated, the aim is to find out do investors respect dividends more during a recession than a boom and can this be proved by using dividend yield brackets. The empirical results from U.S shows that the abnormal returns of dividend increase announcements during the recession in the beginning of this decade were larger than during the boom. Thus, investors seem to respect dividend increases more when stock prices are falling. Substantial abnormal returns of dividend increases during the time period of 2005 - 2007 could not be found. The results from the overall samples state that the abnormal returns during the recession were positively slightly higher than during the boom. No clear and strong evidence was found between different dividend yield brackets. In Finland, there were substantial abnormal returns on the announcement day of the extra dividends. Thus, indicating that investors saw the extra dividends as a good thing for shareholders' value. This paper is mostly in line with the theory that investors respect dividends more during bad times than good times.

Abnormal Return of Dividend Announcements during a Boom and a Recession. Empirical evidence from the years of 2002 - 2002 and 2005 - 2007, including the Finnish extra dividends

Tutkimuksen tavoitteena on tutkia epänormaalien tuottojen esiintymistä nousu- ja laskusuhdanteen aikana osingonilmoituspäivän ympärillä. Osinkoilmoitukset ovat kerätty Yhdysvaltojen markkinalta (NYSE) ajanjaksoilta 2000 - 2002, jolloin pörssit laskivat teknokuplan jälkeen ja 2005 - 2007, jolloin sijoittajat kokivat suuria kurssivoittoja. Osinkoilmoitushavainnot koostuvat yhtiöistä, jotka nostivat tai pitivät osinko per osake paikallaan. Tavoitteena on tutkia eroja epänormaaleissa tuotoissa näiden kahden ajanjakson välillä. Toiseksi, tavoitteena on tutkia miten epänormaalit tuotot poikkeavat toisistaan eri osinkotuottoluokissa. Kolmanneksi, tavoitteena on tutkia esiintyikö markkinoilla epänormaaleja tuottoja kun suomalaiset yritykset ilmoittivat ylimääräisistä osingoista, pääasiassa vuonna 2004. Yksinkertaisesti ja lyhyesti sanottuna tavoitteena on tutkia arvostavatko sijoittajat osinkoja enemmän laskukauden vai nousukauden aikana. Rahoitusteorian mukaan sijoittajien tulisi arvostaa laskukauden aikana enemmän yhtiöitä, jotka pystyvät maksamaan huonosta taloustilanteesta huolimatta hyvää osinkoa. Empiiriset testit Yhdysvalloista osoittavat, että osingon nostamisesta johtuvat epänormaalit tuotot olivat suuremmat laskusuhdanteen aikana kuin noususuhdanteen aikana. Tämä on linjassa teorian kanssa. Osingon-nostot aiheuttivat nousukauden aikana vähäisiä epänormaaleja tuottoja. Selviä eroja eri osingontuottoluokkien välillä ei pystytty havaitsemaan. Tulokset yhdistetystä aineistosta osoittavat, että sijoittajat kokivat vähäisiä positiivisia epänormaaleja tuottoja laskukauden aikana. Nousukautena tuotot olivat lähellä nollaa. Suomen markkinoilla havaittiin selvä epänormaalituotto osingonilmoituspäivänä. Tulokset ovat pääpiirteittäin linjassa teorian kanssa. Sijoittajat arvostavat osinkoja hieman enemmän lasku- kuin noususuhdanteen aikana.

Occlusal and dentofacial characteristics of the deciduous dentition and treatment effects of the eruption guidance appliance in the early mixed dentition

The aim of this investigation was to analyze the dental occlusion in the deciduous dentition, and the effects of orthodontic treatment carried out in the early mixed dentition with the eruption guidance appliance. The deciduous occlusion and craniofacial morphology of 486 children (244 girls and 242 boys) were investigated at the onset of the mixed dentition period (mean age 5.1 years, range 4.0-7.8 years). Treatment in the treatment group and follow-up in the control group were started when the first deciduous incisor was exfoliated (T1) and ended when all permanent incisors and first molars were fully erupted (T2). The mean age of the children was 5.1 years (SD 0.5) at T1 and 8.4 years (SD 0.5) at T2. Treatment was carried out with the eruption guidance appliance. Occlusal changes that took place in 167 children were compared with those of 104 untreated control children. Pre- and post-treatment cephalometric radiographs were taken, and the craniofacial morphology of 115 consecutively treated children was compared with that of 104 control children. The prevalence of malocclusion in the deciduous dentition was 68% or 93% depending on how the cut-off value between the acceptable and non-acceptable occlusal characteristic was defined. The early dentofacial features of children with distal occlusion, large overjet and deepbite differed from those with normal occlusion. However, the skeletal pattern of these three malocclusions showed considerable similarity each being characterized by a retrusive mandible, small maxillo-mandibular difference, convex profile, retrusive lower incisors, and large interincisal angle. In the treatment group, overjet and overbite decreased significantly from T1 to T2. Following treatment, a tooth-to-tooth contact was found in 99% of the treated children but only in 24% of the controls. A Class I molar relationship was observed in 90% of the children in the treatment group, and in 48% in the control group. Good alignment of the incisors was observed in 98% of the treated children, whereas upper crowding was found in 32% and lower crowding in 47% of the controls. A significant difference between the groups was found in the mandibular length, midfacial length and maxillo-mandibular differential. The occlusal correction, brought about by the eruption guidance appliance, was achieved mainly through changes in the dentoalveolar region of the mandible. In addition, the appliance seemed to enhance the growth of the mandible. Treatment in the early mixed dentition using the eruption guidance appliance is an effective method to normalize occlusion and reduce further need of orthodontic treatment. Only few spontaneous corrective changes can be expected without active intervention.

CTQ process flow development and the impact for cost of quality

Tämä työ tehtiin Kone Industrial Oy:lle Major Projects yksikköön, laatuosastolle. Kone Major Projects yksikkö keskittyy erikoisiin ja suuriin hissi- ja liukuporras projekteihin. Työn tavoitteena oli luoda harmonisoitu prosessi hissikomponenttien laaduntarkkailua varten sekä tarkastella ja vertailla kustannussäästöjä, jota tällä uudella prosessilla voidaan saavuttaa. Tavoitteena oli saavuttaa 80-prosentin kustannussäästöt laatukustannuksissa uuden laatuprosessin avulla. Työn taustana ja tutkimusongelmana ovat lisääntyneet erikoisprojektit ja niiden myötä lisääntynyt laaduntarkkailun tarve. Ongelmana laaduntarkkailussa voitiin pitää harmonisoidun ja selkeän prosessin puuttumista C-prosessikomponenttien valmistuksessa. Lisäksi kehitysprosessin aikana luotiin vanhojen työkalujen pohjalta keskeinen laaduntarkkailutyökalu, CTQ-työkalu. Työssä käsitellään ensin Konetta yhtiönä ja selvitetään Koneen keskeisimmät prosessit työn taustaksi. Teoria osuudessa käsitellään prosessin kehitykseen liittyviä teorioita sekä yleisiä laatukäsitteitä ja esitetään teorioita laadun asemasta nykypäivänä. Lopuksi käsitellään COQ eli laatukustannusten teoriaa ja esitellään teoria PAF-analyysille, jota käytetään työssä laatukustannusten vertailuun case esimerkin avulla. Työssä kuvataan CTQ prosessin luominen alusta loppuun ja case esimerkin avulla testataan uutta CTQ prosessia pilottihankkeessa. Tässä case esimerkissä projektin bracket eli johdekiinnitysklipsi tuotetaan uuden laatuprosessin avulla sekä tehdään kustannusvertailu saman projektin toisen bracketin kanssa, joka on tuotettu ennen uuden laatuprosessin implementoimista. Työn lopputuloksena CTQ prosessi saatiin luotua ja sitä pystyttiin testaamaan käytännössä case esimerkin avulla. Tulosten perusteella voidaan sanoa, että CTQ prosessin käyttö vähentää laatukustannuksia huomattavasti ja helpottaa laadunhallintaa C-prosessikomponenttien tuotannossa.