Huoneistokohtaisen ilmanvaihtokoneen lämmöntalteenoton ja äänenvaimentimien kehitys

Tämän työn tavoitteena oli selvittää erään ilmanvaihtokoneen lämmöntalteenottokennon vuosihyötysuhde japohtia voitaisiinko ilmastointikoneen energiatehokkuutta parantaa käyttämällä nykyisen ristivirtalämmönsiirtimen tilalla vastavirtalämmönsiirrintä tai poistoilmalämpöpumppua. Lisäksi tavoitteena oli mitata kahden ilmanvaihtokoneeseen liitettävän äänenvaimentimen vaimennuskyky ja pyrkiä parantamaan näiden vaimennusta. Työn teoriaosassa käsitellään yleisellä tasolla eri ilmanvaihtotapojen ja lämmöntalteenottomenetelmien toimintaperiaatteita ja soveltuvuuksiaeri tilanteisiin. Työn kokeellisessa osassa mitataan ilmanvaihtokoneen lämmöntalteenoton toiminta eri sääolosuhteissa ja lasketaan tulosten perusteella laitteelle lämpötila- ja entalpiavuosihyötysuhteet. Äänenvaimentimesta rakennetaan kaksi kehitysversiota, joiden mittaustuloksia verrataan alkuperäisen vaimentimen vaimennuskykyyn. Lämmöntalteenottoja vertailtaessa havaittiin, että suositeltavin kehitysvaihtoehto olisi vastavirtalämmönsiirtimeen siirtyminen sen yksinkertaisen rakenteen ja hyvän hyötysuhteen ansiosta.Äänenvaimentimien rakenteessa kannattaa mittausten ja pohdinnan perusteella siirtyä seinämillä jaettuun vaimentimeen.

Sälerakenteiset sulku- ja säätölaitteet kaasuvirtauksessa

Sulku- jasäätölaitteita käytetään kaasuvirtausten estämiseen ja ohjaukseen. Yleinen rakennetyyppi on sälerakenne, jossa kanavaan asennettuja akseloituja säleitä kääntämällä saadaan virtauksen vapaata pinta-alaa säädettyä. Sulkulaitteiden virtauksenestokyky riippuu tiiveydestä kiinni-asennossa. Säätölaitteiden virtauksen rajoittamiskyky muuttuu asetuskulman mukaan eri konstruktioilla eri lailla. Työn tavoitteena on ollut tuottaa tehtyjen tutkimusten tuloksista pohjatiedot työn yhteydessä luotavaan raportointi- ja laskentasovellukseen, jolla on mahdollista riittävän tarkasti arvioida Sammet Dampers Oy:n tuotannossa olevien sälerakenteisten sulku- ja säälaitteiden ominaisuuksia ilman tapauskohtaista mittaamista tai mallintamista sekä tuottaa samalla asiakkaille valmiit raportit näistä ominaisuuksista. Tehtyjen tutkimusten pääpaino on ollut säätölaitteissa. Tutkimuksissa on selvitetty mm. säleiden lukumäärän, korkeussuhteen, sivusuhteen ja Reynoldsin luvun vaikutusta laitteen vastuskertoimeen ennalta määritellyillä asetuskulmilla. Tutkimukset koostuvat mallikokeista ja CFD-laskennasta. Lisäksi työn pohjana on ollut huomattava määrä aikaisempia selvityksiä. Työn tavoitteiden täyttämisessä on onnistuttu tyydyttävästi. Tutkittujen tekijöiden vaikutuksille vastuskertoimiin on luotu sovitteet mittausten ja CFD:n perusteella. CFDon osoittautunut käyttökelpoiseksi vain hyvin rajatulle joukolle tapauksia.

Direct-on-line axial flux permanent magnet synchronous generator static and dynamic performance

In distributed energy production, permanent magnet synchronous generators (PMSG) are often connected to the grid via frequency converters, such as voltage source line converters. The price of the converter may constitute a large part of the costs of a generating set. Some of the permanent magnet synchronous generators with converters and traditional separately excited synchronous generators couldbe replaced by direct-on-line (DOL) non-controlled PMSGs. Small directly networkconnected generators are likely to have large markets in the area of distributed electric energy generation. Typical prime movers could be windmills, watermills and internal combustion engines. DOL PMSGs could also be applied in island networks, such as ships and oil platforms. Also various back-up power generating systems could be carried out with DOL PMSGs. The benefits would be a lower priceof the generating set and the robustness and easy use of the system. The performance of DOL PMSGs is analyzed. The electricity distribution companies have regulations that constrain the design of the generators being connected to the grid. The general guidelines and recommendations are applied in the analysis. By analyzing the results produced by the simulation model for the permanent magnet machine, the guidelines for efficient damper winding parameters for DOL PMSGs are presented. The simulation model is used to simulate grid connections and load transients. The damper winding parameters are calculated by the finite element method (FEM) and determined from experimental measurements. Three-dimensional finite element analysis (3D FEA) is carried out. The results from the simulation model and 3D FEA are compared with practical measurements from two prototype axial flux permanent magnet generators provided with damper windings. The dimensioning of the damper winding parameters is case specific. The damper winding should be dimensioned based on the moment of inertia of the generating set. It is shown that the damper winding has optimal values to reach synchronous operation in the shortest period of time after transient operation. With optimal dimensioning, interferenceon the grid is minimized.

A comparative performance study of four-pole induction motors and synchronous reluctance motors in variable speed drives

Design aspects of the Transversally Laminated Anisotropic (TLA) Synchronous Reluctance Motor (SynRM) are studied and the machine performance analysis compared to the Induction Motor (IM) is done. The SynRM rotor structure is designed and manufactured for a30 kW, four-pole, three-phase squirrel cage induction motor stator. Both the IMand SynRM were supplied by a sensorless Direct Torque Controlled (DTC) variablespeed drive. Attention is also paid to the estimation of the power range where the SynRM may compete successfully with a same size induction motor. A technicalloss reduction comparison between the IM and SynRM in variable speed drives is done. The Finite Element Method (FEM) is used to analyse the number, location and width of flux barriers used in a multiple segment rotor. It is sought for a high saliency ratio and a high torque of the motor. It is given a comparison between different FEM calculations to analyse SynRM performance. The possibility to take into account the effect of iron losses with FEM is studied. Comparison between the calculated and measured values shows that the design methods are reliable. A new application of the IEEE 112 measurement method is developed and used especially for determination of stray load losses in laboratory measurements. The study shows that, with some special measures, the efficiency of the TLA SynRM is equivalent to that of a high efficiency IM. The power factor of the SynRM at rated load is smaller than that of the IM. However, at lower partial load this difference decreases and this, probably, brings that the SynRM gets a better power factor in comparison with the IM. The big rotor inductance ratio of the SynRM allows a good estimating of the rotor position. This appears to be very advantageous for the designing of the rotor position sensor-less motor drive. In using the FEM designed multi-layer transversally laminated rotor with damper windings it is possible to design a directly network driven motor without degrading the motorefficiency or power factor compared to the performance of the IM.

Kiinnirullaimen dynamiikan ja värähtelyjen simulointi

Diplomityössä tutkittiin kaupallisen monikappaledynamiikkaohjelmiston soveltuvuutta kiinnirullaimen dynamiikan ja värähtelyjen tutkimiseen. Erityisen kiinnostuneita oltiin nipin kuvauksesta sekä nipissä tapahtuvista värähtelyistä. Tässä diplomityössä mallinnettiin kiinnirullaimen ensiö- ja toisiokäytöt sekä tampuuritela. Malli yhdistettiin myöhemmin Metso Paper Järvenpäässä rinnakkaisena diplomityönä tehtyyn malliin, joista muodostui kahteen ratkaisijaan perustuva simulointimalli. Simulointimalli rakennettiin käyttämään kahta erillistä ratkaisijaa, joista toinen on mekaniikkamallin rakentamisessa käytetty ADAMS-ohjelmisto ja toinen säätöjärjestelmää ja hydraulipiirejä kuvaava Simulink-malli. Nipin mallintamiseksi tampuuritela ja rullaussylinteri mallinnettiin joustaviksi käyttäen keskitettyjen massojen menetelmää. Siirtolaitteissa sekä runkorakenteissa tapahtuvat joustot kuvattiin yhden vapausasteen jousi-vaimennin voimilla kuvattuina järjestelminä. Tässä diplomityössä on myös keskitytty esittelemään ADAMS-ohjelmiston toimintaa ohjeistavasti sekä käsittelemään parametrisen mallintamisen etuja. Työssä havaittiin monikappaledynamiikan soveltuvuus kiinnirullaimen dynamiikan sekä dynaamisten voimien aiheuttamien värähtelyjen tutkimiseen. Suoritetuista värähtelymittauksista voitiin tehdä vain arvioita. Mallin havaittiin vaativan lisätutkimusta ja kehitystyötä

Position sensorless electrically excited synchronous motor drive for industrial use based on direct flux linkage and torque control

Synchronous machines with an AC converter are used mainly in large drives, for example in ship propulsion drives as well as in rolling mill drives in steel industry. These motors are used because of their high efficiency, high overload capacity and good performance in the field weakening area. Present day drives for electrically excited synchronous motors are equipped with position sensors. Most drives for electrically excited synchronous motors will be equipped with position sensors also in future. This kind of drives with good dynamics are mainly used in metal industry. Drives without a position sensor can be used e.g. in ship propulsion and in large pump and blower drives. Nowadays, these drives are equipped with a position sensor, too. The tendency is to avoid a position sensor if possible, since a sensor reduces the reliability of the drive and increases costs (latter is not very significant for large drives). A new control technique for a synchronous motor drive is a combination of the Direct Flux Linkage Control (DFLC) based on a voltage model and a supervising method (e.g. current model). This combination is called Direct Torque Control method (DTC). In the case of the position sensorless drive, the DTC can be implemented by using other supervising methods that keep the stator flux linkage origin centered. In this thesis, a method for the observation of the drift of the real stator flux linkage in the DTC drive is introduced. It is also shown how this method can be used as a supervising method that keeps the stator flux linkage origin centered in the case of the DTC. In the position sensorless case, a synchronous motor can be started up with the DTC control, when a method for the determination of the initial rotor position presented in this thesis is used. The load characteristics of such a drive are not very good at low rotational speeds. Furthermore, continuous operation at a zero speed and at a low rotational speed is not possible, which is partly due to the problems related to the flux linkage estimate. For operation in a low speed area, a stator current control method based on the DFLC modulator (DMCQ is presented. With the DMCC, it is possible to start up and operate a synchronous motor at a zero speed and at low rotational speeds in general. The DMCC is necessary in situations where high torque (e.g. nominal torque) is required at the starting moment, or if the motor runs several seconds at a zero speed or at a low speed range (up to 2 Hz). The behaviour of the described methods is shown with test results. The test results are presented for the direct flux linkage and torque controlled test drive system with a 14.5 kVA, four pole salient pole synchronous motor with a damper winding and electric excitation. The static accuracy of the drive is verified by measuring the torque in a static load operation, and the dynamics of the drive is proven in load transient tests. The performance of the drive concept presented in this work is sufficient e.g. for ship propulsion and for large pump drives. Furthermore, the developed methods are almost independent of the machine parameters.

Suorakulmaisten palonrajoittimien valmistettavuuden kehittäminen

Palonrajoittimet ovat tuotteita, jotka estävät tulen ja savun leviämisen palo-osastosta toiseen ja mahdollistavat ihmisten turvallisen ulospääsyn palotilanteessa. Tämän diplomityön tavoitteena oli vähentää suorakulmaisten palonrajoittimien valmistuskustannuksia niiden valmistettavuutta kehittämällä. Työn teoriaosassa käsitellään valmistettavuutta ja kokoonpantavuutta kehittäviä menetelmiä DFM:ää (Design for Manufacturability) ja DFA:ta (Design for Assembly) sekä palonrajoittimien ja ohutlevytuotteiden erityispiirteitä. Käytännön osuudessa esitellään tutkimusta varten valmistetut kolme kehitettävää palonrajoitinta, joita vertaillaan myös kilpaileviin tuotteisiin. Tuotteista analysoidaan osamääriä, materiaalikustannuksia ja työaikoja. Palonrajoittimien ongelmakohtia olivat muun muassa liittäminen ja kokoonpantavuus. Työssä esitetään keinoja palonrajoitinten valmistusystävälliseen suunnitteluun ja uusi moduloitu tuoteperhemalli, jolla vähennetään varsinkin valmistuksesta aiheutuvia kiinteitä kustannuksia. Lisäksi työssä esitetään alustava runkoratkaisumalli uudelle tuoteperheelle.

Bus bar aeolian vibration field tests

Large amplitude bus bar aeolian vibration may lead to post insulator damage. Different damping applications are used to decrease the risk of large amplitude aeolian vibration. In this paper the post insulator load caused by the bus bar aeolian vibration and the effect of damping methods are evaluated. The effects of three types of bus bar connectors and three types of primary structures are studied. Two actual damping devices, damping cable and their combinations are studied. The post insulator loads are studied with strain gage based custom made force sensors installed on the both ends of the post insulator and with the displacement sensor installed on the midpoint of the bus bar. The post insulator loads are calculated from the strain values and the damping properties are determined from the displacement history. The bus bar is deflected with a hanging weight. The weight is released and the bus bar is left to free damped vibration. Both actual bus bar vibration dampers RIBE and SBI were very effective against the aeolian vibration. Combining vibration damper with damping cable will increase the damping ratio but it may be unnecessary considering the extra effort. Bus bar connector type or primary structure have no effect on the vertical load. The bending moment at the post insulator with double sided bus bar connector is significantly higher than at the post insulator with single sided bus bar connector. No reliable conclusions about bus bar connector type effect can be done, but the roller bearing type or central bearing type connector may reduce the bending moment. The RHS steel frame as primary structure may increase the bending moment peak values since it is the least rigid primary structure type and it may start to vibrate as a response to the awakening force of the vibrating bus bar.

Design and testing of an armature-reaction-compensated permanent magnet synchronous generator for island operation

At present, permanent magnet synchronous generators (PMSGs) are of great interest. Since they do not have electrical excitation losses, the highly efficient, lightweight and compact PMSGs equipped with damper windings work perfectly when connected to a network. However, in island operation, the generator (or parallel generators) alone is responsible for the building up of the network and maintaining its voltage and reactive power level. Thus, in island operation, a PMSG faces very tight constraints, which are difficult to meet, because the flux produced by the permanent magnets (PMs) is constant and the voltage of the generator cannot be controlled. Traditional electrically excited synchronous generators (EESGs) can easily meet these constraints, because the field winding current is controllable. The main drawback of the conventional EESG is the relatively high excitation loss. This doctoral thesis presents a study of an alternative solution termed as a hybrid excitation synchronous generator (HESG). HESGs are a special class of electrical machines, where the total rotor current linkage is produced by the simultaneous action of two different excitation sources: the electrical and permanent magnet (PM) excitation. An overview of the existing HESGs is given. Several HESGs are introduced and compared with the conventional EESG from technical and economic points of view. In the study, the armature-reaction-compensated permanent magnet synchronous generator with alternated current linkages (ARC-PMSG with ACL) showed a better performance than the other options. Therefore, this machine type is studied in more detail. An electromagnetic design and a thermal analysis are presented. To verify the operation principle and the electromagnetic design, a down-sized prototype of 69 kVA apparent power was built. The experimental results are demonstrated and compared with the predicted ones. A prerequisite for an ARC-PMSG with ACL is an even number of pole pairs (p = 2, 4, 6, …) in the machine. Naturally, the HESG technology is not limited to even-pole-pair machines. However, the analysis of machines with p = 3, 5, 7, … becomes more complicated, especially if analytical tools are used, and is outside the scope of this thesis. The contribution of this study is to propose a solution where an ARC-PMSG replaces an EESG in electrical power generation while meeting all the requirements set for generators given for instance by ship classification societies, particularly as regards island operation. The maximum power level when applying the technology studied here is mainly limited by the economy of the machine. The larger the machine is, the smaller is the efficiency benefit. However, it seems that machines up to ten megawatts of power could benefit from the technology. However, in low-power applications, for instance in the 500 kW range, the efficiency increase can be significant.