Sihtirummun väsymisominaisuuksien määrittäminen

Diplomityössä tutkittiin sihtirummun väsymisominaisuuksia. Sihtirumpu on laite, jota käytetään paperin valmistuksessa kuitumassojen käsittelyssä. Työn tavoitteena oli määrittää profiililankatyypin ja tukirenkaan erilaisten valmistustapojen vaikutus sihtirummun väsymiskestävyyteen. Lisäksi tutkittiin vauriomuotoa, jossa yksittäinen profiililanka irtoaa tukilangasta. Sihtirummun väsymisominaisuuksia määritettiin käyttämällä perinteisiä lujuusopin menetelmiä sekä FE-analyysiä ja väsytyskokeita. Teoreettisilla menetelmillä, jotka perustuivat loven vaikutuksen arviointiin, pyrittiin määrittämään perusaineen väsymislujuutta, ja väsytyskokeilla määritettiin sihtirummun hitsien väsymislujuuksia ja yksittäisen langan irtoamista. Sihtirummun hitsit olivat väsymislujuudeltaan huomattavasti perusainetta heikompia, eikä profiililankatyyppi vaikuttanut merkittävästi sihtirummun väsymiskestävyyteen. Hitsaamattoman tukirenkaan ja tukilangan liitoksen havaittiin nostavan sihtirummun väsymiskestävyyttä, mutta silloin ongelmana ovat tukirenkaan ja tukilangan väliin pääsevät kuidut. Yksittäisen profiililangan irtoamisen ei pitäisi rajoittaa sihtirummun väsymiskestävyyttä.

Guidelines for supplier selection and performance evaluation in the case-company

Tutkielmantavoitteena oli luoda ohjeistus toimittajan valinnasta ja suorituskyvyn arvioinnista case - yrityksen, Exel Oyj:n, käyttöön. Ohjeistuksen tarkoituksena oli ollalähtökohtana toimittajan valinta- ja suoristuskyvyn arviointiprosessien kehittämisessä. Tutkielma keskittyy esittelemään toimittajan valintakriteereitä ja toimittajan suorituskyvyn arviointikriteereitä. Kriteerit valittiin ja analysoitiin teorian ja empirian avulla ja kriteereistä tehtiin selkeät listaukset. Näitä listoja käytettiin avuksi pohdittaessa uusia valintakriteereitä ja suorituskyvyn arviointikriteereitä, joita case -yritys voi jatkossa käyttää. Tutkielmassa käytiin läpi myös toimittajan valintaprosessi jaapuvälineitä ja mittareita toimittajan arviointiin liittyen. Empiirisen aineiston keruu toteutettiin haastattelemalla hankintapäällikköä sekä keräämällä tietoavuosikertomuksesta ja yrityksen internet sivuilta. Tutkielman tuloksena saatiinlistauksia kriteereistä, joita yritys voi hyödyntää jatkossa sekä listaukset kriteereistä, jotka valittiin alustavasti yrityksen käyttöön.

Turveperävaunun väsymiskestävyyden parantaminen

Työssä tutkittiin turveperävaunun renkaan kiinnitysrakenteen väsymiskestävyyttä. Väsymiskestävyyden parantamiseksi renkaiden kiinnityskohdan muotoilu ja mitoitus suunniteltiin uudelleen. Suunnittelussa keskityttiin ensisijaisesti nimellisten ja rakenteellisten jännitysheilahdusten pienentämiseen. Sekä vanhan, että uuden rakenneratkaisun väsymiskestoikiä tarkasteltiin käyttämällä hot spot – menetelmää.

A modified nominal stress method for fatigue assessment of steel plates with thermally cut edges

Thermal cutting methods, are commonly used in the manufacture of metal parts. Thermal cutting processes separate materials by using heat. The process can be done with or without a stream of cutting oxygen. Common processes are Oxygen, plasma and laser cutting. It depends on the application and material which cutting method is used. Numerically-controlled thermal cutting is a cost-effective way of prefabricating components. One design aim is to minimize the number of work steps in order to increase competitiveness. This has resulted in the holes and openings in plate parts manufactured today being made using thermal cutting methods. This is a problem from the fatigue life perspective because there is local detail in the as-welded state that causes a rise in stress in a local area of the plate. In a case where the static utilization of a net section is full used, the calculated linear local stresses and stress ranges are often over 2 times the material yield strength. The shakedown criteria are exceeded. Fatigue life assessment of flame-cut details is commonly based on the nominal stress method. For welded details, design standards and instructions provide more accurate and flexible methods, e.g. a hot-spot method, but these methods are not universally applied to flame cut edges. Some of the fatigue tests of flame cut edges in the laboratory indicated that fatigue life estimations based on the standard nominal stress method can give quite a conservative fatigue life estimate in cases where a high notch factor was present. This is an undesirable phenomenon and it limits the potential for minimizing structure size and total costs. A new calculation method is introduced to improve the accuracy of the theoretical fatigue life prediction method of a flame cut edge with a high stress concentration factor. Simple equations were derived by using laboratory fatigue test results, which are published in this work. The proposed method is called the modified FAT method (FATmod). The method takes into account the residual stress state, surface quality, material strength class and true stress ratio in the critical place.

New directions in Stochastic Multicriteria Acceptability Analysis

Decisions taken in modern organizations are often multi-dimensional, involving multiple decision makers and several criteria measured on different scales. Multiple Criteria Decision Making (MCDM) methods are designed to analyze and to give recommendations in this kind of situations. Among the numerous MCDM methods, two large families of methods are the multi-attribute utility theory based methods and the outranking methods. Traditionally both method families require exact values for technical parameters and criteria measurements, as well as for preferences expressed as weights. Often it is hard, if not impossible, to obtain exact values. Stochastic Multicriteria Acceptability Analysis (SMAA) is a family of methods designed to help in this type of situations where exact values are not available. Different variants of SMAA allow handling all types of MCDM problems. They support defining the model through uncertain, imprecise, or completely missing values. The methods are based on simulation that is applied to obtain descriptive indices characterizing the problem. In this thesis we present new advances in the SMAA methodology. We present and analyze algorithms for the SMAA-2 method and its extension to handle ordinal preferences. We then present an application of SMAA-2 to an area where MCDM models have not been applied before: planning elevator groups for high-rise buildings. Following this, we introduce two new methods to the family: SMAA-TRI that extends ELECTRE TRI for sorting problems with uncertain parameter values, and SMAA-III that extends ELECTRE III in a similar way. An efficient software implementing these two methods has been developed in conjunction with this work, and is briefly presented in this thesis. The thesis is closed with a comprehensive survey of SMAA methodology including a definition of a unified framework.

Puutavaranosturin teleskooppipuomin kehittäminen ultralujilla teräksillä toteutettavaksi

Diplomityössä on tutkittu ultralujien terästen käyttömahdollisuuksia puutavaranosturin puomirakenteissa. Työn tavoitteena on ollut suunnitella uusi puomikonstruktio, joka on kevyempi kuin aiemmat ratkaisut, mutta täyttää kuitenkin sovellettavien standardien asettamat vaatimukset väsymisen, staattisen kestävyyden ja stabiliteetin suhteen. Työ on tehty vertailemalla erilaisten uusien profiilien ja rakenneyksityiskohtien ominaisuuksia toisiinsa ja vanhaan rakenteeseen. Vertailukriteereinä on käytetty elastista taivutuskapasiteettia, kriittistä lommahduskuormaa, väsymislujuutta sekä hitsaus- ja materiaalikustannuksia. Työn lopputuloksena saatiin ehdotus uudeksi teleskooppipuomiksi, joka on noin 8 % kevyempi kuin nykyinen ratkaisu.

An Assessment ofFatigue Strength of Load Carrying Welded Joints with Lack of Penetration

On yleisesti tiedossa, että väsyttävän kuormituksen alaisena olevat hitsatut rakenteet rikkoutuvat juuri hitsausliitoksista. Täyden tunkeuman hitsausliitoksia sisältävien rakenteiden asiantunteva suunnittelu janykyaikaiset valmistusmenetelmät ovat lähes eliminoineet väsymisvauriot hitsatuissa rakenteissa. Väsymislujuuden parantaminen tiukalla täyden tunkeuman vaatimuksella on kuitenkin epätaloudellinen ratkaisu. Täyden tunkeuman hitsausliitoksille asetettavien laatuvaatimuksien on määriteltävä selkeät tarkastusohjeet ja hylkäämisperusteet. Tämän diplomityön tarkoituksena oli tutkia geometristen muuttujien vaikutusta kuormaa kantavien hitsausliitosten väsymislujuuteen. Huomio kiinnitettiin pääasiassa suunnittelumuuttujiin, joilla on vaikutusta väsymisvaurioiden syntymiseen hitsauksen juuren puolella. Nykyiset määräykset ja standardit, jotka perustuvat kokeellisiin tuloksiin; antavat melko yleisiä ohjeita hitsausliitosten väsymismitoituksesta. Tämän vuoksi muodostettiin kokonaan uudet parametriset yhtälöt sallitun nimellisen jännityksen kynnysarvon vaihteluvälin, ¿¿th, laskemiseksi, jotta vältettäisiin hitsausliitosten juuren puoleiset väsymisvauriot. Lisäksi, jokaiselle liitostyypille laskettiin hitsin juuren puolen väsymisluokat (FAT), joita verrattiin olemassa olevilla mitoitusohjeilla saavutettuihin tuloksiin. Täydentäviksi referensseiksi suoritettiin useita kolmiulotteisia (3D) analyysejä. Julkaistuja kokeellisiin tuloksiin perustuvia tietoja käytettiin apuna hitsausliitosten väsymiskäyttäytymisen ymmärtämiseksi ja materiaalivakioiden määrittämiseksi. Kuormaa kantavien vajaatunkeumaisten hitsausliitosten väsymislujuus määritettiin käyttämällä elementtimenetelmää. Suurimman pääjännityksen kriteeriä hyödynnettiin murtumiskäyttäytymisen ennakoimiseksi. Valitulle hitsatulle materiaalille ja koeolosuhteille murtumiskäyttäytymistä mallinnettiin särön kasvunopeudella da/dN ja jännitysintensiteettikertoimen vaihteluvälillä, 'K. Paris:n yhtälön numeerinen integrointi suoritettiin FRANC2D/L tietokoneohjelmalla. Saatujen tulosten perusteella voidaan laskea FAT tutkittavassa tapauksessa. ¿¿th laskettiin alkusärön jännitysintensiteettikertoimen vaihteluvälin ja kynnysjännitysintensiteettikertoimen, 'Kth, perusteella. ¿Kth arvoa pienemmällä vaihteluvälillä särö ei kasva. Analyyseissäoletuksena oli hitsattu jälkikäsittelemätön liitos, jossa oli valmis alkusärö hitsin juuressa. Analyysien tulokset ovat hyödyllisiä suunnittelijoille, jotka tekevät päätöksiä koskien geometrisiä parametreja, joilla on vaikutusta hitsausliitosten väsymislujuuteen.

Technology roadmap for new sales support and management system for crane manufacturing company

Sales configurators are essential tools for companies that offer complicated case specifically crafted products for customers. Most sophisticated of them are able to design an entire end product on the fly according to given constraints, calculate price for the offer and move the order into production. This thesis covers a sales configurator acquisition project in a large industrial company that offers cranes for its customers. The study spans the preliminary stages of a large-scale software purchase project starting from the specification of problem domain and ending up presenting the most viable software solution that fulfils the requirements for the new system. The project consists of mapping usage environment, use cases, and collecting requirements that are expected from the new system. The collected requirements involve fitting the new sales system into enterprise application infrastructure, mitigating the risks involved in the project and specifying new features to the application whilst preserving all of the admired features of the old sales system currently used in the company. The collected requirements were presented to a number of different sales software vendors who were asked to provide solution suggestions that would fulfil all the demands. All of the received solution proposals were exposed to an evaluation to determine the most feasible solutions, and the construction of evaluation criteria itself was a part of the study. The final outcome of this study is a short-list of the most feasible sales configurator solutions together with a description of how software purchase process in large enterprises work, and which aspects should be paid attention in large projects of similar kind.

Defining the location factors of new manufacturing site in chemical industry

The objective of this thesis is to examine the factors that have an impact on the location decision of new manufacturing site and to create the relative order of importance of these factors by analytic hierarchy process (AHP). The decision making process especially related to the location selection and the measurement of the location factors are also examined. In theoretical part the character of decision making process and the relevant methods are introduced. Based on the previous studies of other researchers, the location factors are examined and the main research method, analytic hierarchy process, is also introduced. The empirical part of the study mainly follows the phases of decision making process and is emphasized on the main stages of analytic hierarchy process; building the hierarchy, defining the priorities and analyzing the results. The hierarchy is constructed from seven main criteria which all have several sub criteria. The evaluation of the hierarchy is implemented at the group decision making –laboratory and there can be seen significant differences between the importance of criteria. The final stage in the study is to create the appropriate measurement scales to the chosen criteria.

“THE PATIENT SURVIVED DESPITE THE TREATMENT”. A study of Finnish health policy and New Public Management. Case: The Government Resolution on the Health 2015 public health programme.

Internationally, Finland has been among the most respected countries during several decades in terms of public health. WHO has had the most significant influence on Finnish health policy and the relationship has traditionally been warm. However, the situation has slightly changed in the last 10-20 years. The objectives of Finnish national health policy have been to secure the best possible health for the population and to minimize disparities in health between different population groups. Nevertheless, although the state of public health and welfare has steadily improved, the socioeconomic disparities in health have increased. This qualitative case study will demonstrate why health is political and why health matters. It will also present some recommendations for research topics and administrative reforms. It will be argued that lack of political interest in health policy leads to absence of health policy visions and political commitment, which can be disastrous for public health. This study will investigate how Finnish health policy is defined and organised, and it will also shed light on Finnish health policy formation processes and actors. Health policy is understood as a broader societal construct covering the domains of different ministries, not just Ministry of Social Affairs and Health (MSAH). The influences of economic recession of the 1990s, state subsidy reform in 1993, globalisation and the European Union will be addressed, as well. There is not much earlier Finnish research done on health policy from political science viewpoint. Therefore, this study is interdisciplinary and combines political science with administrative science, contemporary history and health policy research with a hint of epidemiology. As a method, literature review, semi-structured interviews and policy analysi will be utilised. Institutionalism, policy transfer, and corporatism are understood as the theoretical framework. According to the study, there are two health policies in Finland: the official health policy and health policy generated by industry, media and various interest organisations. The complex relationships between the Government and municipalities, and on the other hand, the MSAH and National Institute for Health and Welfare (THL) seemed significant in terms of Finnish health policy coordination. The study also showed that the Investigated case, Health 2015, does not fulfil all necessary criteria for a successful public health programme. There were also several features both in Health 2015 and Finnish health policy, which can be interpreted in NPM framework and seen having NPM influences.

The contributions of netnography in new product development

Netnography has been studying in various aspects (e.g. definitions of netnography, application of netngoraphy, conducting procedure…) within different industrial contexts. Besides, there are many studies and researches about new product development in various perspectives, such as new product development models, management of new product development project, or interaction between customers and new product design, and so on. However, the connection and the interaction between netnography and new product development have not been studied recently. This opens opportunities for the writer to study and explore unrevealed issues regarding to applying netnography in new product development. In term of the relation between netnography and new product development, there are numerous of matters need to be explored; for instance, the process of applying netnography in order to benefit to new product development, the involvement degree of netnography in new product development process, or eliminating useless information from netnography so that only crucial data is utilized, and so on. In this thesis, writer focuses on exploring how netnography is applied in new product development process, and what benefits netnography can contribute to the succeed of the project. The aims of this study are to understand how netnography is conducted for new product development purpose, and to analyse the contributions of netnography in the new product development process. To do so, a case-study strategy will be conducted with triple case studies. The case studies are chosen bases on many different criteria in order to select the most relevant cases. Eventually, the writer selected three case studies, which are Sunless tanning product project (HYVE), Listerine (NetBase), and Nivea co-creation and netnography in black and white deodorant. The case study strategy applied in this thesis includes four steps e.g. case selection, data collection, case study analysis, and generating the research outcomes from the analysis. This study of the contributions of netnography in the new product development process may be useful for the readers in many ways. It offers the fundamental knowledge of netnography market research method and basic understanding of new product development process. Additionally, it emphasizes the differences between netnography and other market research methods in order to explain the reasons why many companies and market research agents recently utilized netnography in their market research projects. Furthermore, it highlights the contributions of netnography in the new product development process in order to indicate the importance of netnography in developing new product. Thus, the potential readers of the study can be students, marketers, researchers, product developers, or business managers.

What is behind the OpenDOAR? New Development and Community Benefits

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

New families of highly efficient, halogen-free flame retardants for polypropylene (PP)

The driving forces for current research of flame retardants are increased fire safety in combination with flame retardant formulations that fulfill the criteria of sustainable production and products. In recent years, important questions about the environmental safety of antimony, and in particular, brominated flame retardants have been raised. As a consequence of this, the current doctoral thesis work describes efforts to develop new halogen-free flame retardants that are based on various radical generators and phosphorous compounds. The investigation was first focused on compounds that are capable of generating alkyl radicals in order to study their role on flame retardancy of polypropylene. The family of azoalkanes was selected as the cleanest and most convenient source of free alkyl radicals. Therefore, a number of symmetrical and unsymmetrical azoalkanes of the general formula R-N=N-R’ were prepared. The experimental results show that in the series of different sized azocycloalkanes the flame retardant efficacy decreased in the following order: R = R´= cyclohexyl > cyclopentyl > cyclobutyl > cyclooctanyl > cyclododecanyl. However, in the series of aliphatic azoalkanes compounds, the efficacy decreased as followed: R = R´= n-alkyl > tert-butyl > tert-octyl. The most striking difference in flame retardant efficacy was observed in thick polypropylene plaques of 1 mm, e.g. azocyclohexane (AZO) had a much better flame retardant performance than did the commercial reference FR (Flamestab® NOR116) in thick PP sections. In addition, some of the prepared azoalkane flame retardants e.g. 4’4- bis(cyclohexylazocyclohexyl) methane (BISAZO) exhibited non-burning dripping behavior. Extrusion coating experiments of flame retarded low density polyethylene (LDPE) onto a standard machine finished Kraft paper were carried out in order to investigate the potential of azoalkanes in multilayer facings. The results show that azocyclohexane (AZO) and 4’4-bis (cyclohexylazocyclohexyl) methane (BISAZO) can significantly improve the flame retardant properties of low density polyethylene coated paper already at 0.5 wt.% loadings, provided that the maximum extrusion temperature of 260 oC is not exceeded and coating weight is kept low at 13 g/m2. In addition, various triazene-based flame retardants (RN1=N2-N3R’R’’) were prepared. For example, polypropylene samples containing a very low concentration of only 0.5 wt.% of bis- 4’4’-(3’3’-dimethyltriazene) diphenyl ether and other triazenes passed the DIN 4102-1 test with B2 classification. It is noteworthy that no burning dripping could be detected and the average burning times were very short with exceptionally low weight losses. Therefore, triazene compounds constitute a new and interesting family of radical generators for flame retarding of polymeric materials. The high flame retardant potential of triazenes can be attributed to their ability to generate various types of radicals during their thermal decomposition. According to thermogravimetric analysis/Fourier transform infrared spectroscopy/MS analysis, triazene units are homolytically cleaved into various aminyl, resonance-stabilized aryl radicals, and different CH fragments with simultaneous evolution of elemental nitrogen. Furthermore, the potential of thirteen aliphatic, aromatic, thiuram and heterocyclic substituted organic disulfide derivatives of the general formula R-S-S-R’ as a new group of halogen-free flame retardants for polypropylene films have been investigated. According to the DIN 4102- 1 standard ignitibility test, for the first time it has been demonstrated that many of the disulfides alone can effectively provide flame retardancy and self-extinguishing properties to polypropylene films at already very low concentrations of 0.5 wt.%. For the disulfide family, the highest FR activity was recorded for 5’5’-dithiobis (2-nitrobenzoic acid). Very low values for burning length (53 mm) and burning time (10 s) reflect significantly increased fire retardant performance of this disulfide compared to other compounds in this series as well as to Flamestab® NOR116. Finally, two new, phosphorus-based flame retardants were synthesized: P’P-diphenyl phosphinic hydrazide (PAH) and melamine phenyl phosphonate (MPhP). The DIN 4102-1 test and the more stringent UL94 vertical burning test (UL94 V) were used to assess the formulations ability to extinguish a flame once ignited. A very strong synergistic effect with azoalkanes was found, i.e. in combination with these radical generators even UL94 V0 rate could be obtained.

Green supplier selection via Multiple Criteria Data Envelopment Analysis

An appropriate supplier selection and its profound effects on increasing the competitive advantage of companies has been widely discussed in supply chain management (SCM) literature. By raising environmental awareness among companies and industries they attach more importance to sustainable and green activities in selection procedures of raw material providers. The current thesis benefits from data envelopment analysis (DEA) technique to evaluate the relative efficiency of suppliers in the presence of carbon dioxide (CO2) emission for green supplier selection. We incorporate the pollution of suppliers as an undesirable output into DEA. However, to do so, two conventional DEA model problems arise: the lack of the discrimination power among decision making units (DMUs) and flexibility of the inputs and outputs weights. To overcome these limitations, we use multiple criteria DEA (MCDEA) as one alternative. By applying MCDEA the number of suppliers which are identified as efficient will be decreased and will lead to a better ranking and selection of the suppliers. Besides, in order to compare the performance of the suppliers with an ideal supplier, a “virtual” best practice supplier is introduced. The presence of the ideal virtual supplier will also increase the discrimination power of the model for a better ranking of the suppliers. Therefore, a new MCDEA model is proposed to simultaneously handle undesirable outputs and virtual DMU. The developed model is applied for green supplier selection problem. A numerical example illustrates the applicability of the proposed model.

NEW BUSINESS MODELS – Sustainability as a main focus

A business model is a structure frame of an organization that can bring significant benefits and competitive advantage when structured properly. The aim of this paper was to observe and describe development of business models’ and identify factors and elements of a business model that are in a key role from the perspective of an organizational sustainability. One is striving to bring out in this thesis how should truly sustainable business model look like and what are main characteristics of it. Additionally, some recommendations that could be helpful in order to build sustainable and balanced business model in a company are presented in this work. The meaning was to make theoretical and in some extent practical acquaintance with such new business models as open business model and sustainable business model. Long-term sustainability achievement in a company was in a centric role and used as a main criteria when constructing sustainable business model structure. The main research question in this study aims to answer: What a firm should consider in order to develop profitable and sustainable business model? This study is qualitative in nature and it was conducted using content analyze as a main method of this research. The perspective of the target data in this study is an outlook of its producers of how sustainability is reached in an organization throw business model and which practices are important and has to be taken into account. The material was gathered mainly from secondary sources and the theoretical framework was outright built based on secondary data. The secondary data that have been mostly dissertations, academic writings, cases, academic journals and academic books have been analyzed from the point of view of sustainability perspective. As a result it became evident that a structure of a business model and its implementation along with a strategy is often what leads companies to success. However, for the most part, overall business environment decides and delimits how the most optimal business model should be constructed in order to be effective and sustainable. The evaluation of key factors and elements in business model leading organization to sustainability should be examined throw triple bottom line perspective, where key dimensions are environmental, social and economic. It was concluded that dimensions should be evaluated as equal in order to attain total long lasting sustainability, contradicting traditional perspective in business where profit production is seen as only main goal of a business.