A Study on Fractionation and Ultrafiltration of Proteins with Characterized Modified and Unmodified Membranes

Membrane filtration has become increasingly attractive in the processing of both foodand biotechnological products. However, the poor selectivity of the membranes and fouling are the critical factors limiting the development of UF systems for the specific fractionation of protein mixtures. This thesis gives an overview on fractionation of proteins from model protein solutions or from biological solutions. An attempt was made to improve the selectivity of the available membranes by modifying the membranes and by exploiting the different electrostatic interactions between the proteins and the membrane pore surfaces. Fractionation and UF behavior of proteins in the model solutions and in the corresponding biological solutions were compared. Characterization of the membranes and protein adsorptionto the membrane were investigated with combined flux and streaming potential studies. It has been shown that fouling of the membranes can be reduced using "self-rejecting" membranes at pH values where electrostatic repulsion is achieved between the membrane and the proteins in solution. This effect is best shown in UF of dilute single protein solutions at low ionic strengths and low pressures. Fractionation of model proteins in single, binary, and ternary solutionshas been carried out. The results have been compared to the results obtained from fractination of biological solutions. It was generally observed that fractination of proteins from biological solutions are more difficult to carry out owingto the presence of non studied protein components with different properties. Itcan be generally concluded that it is easier to enrich the smaller protein in the permeate but it is also possible to enrich the larger protein in the permeateat pH values close to the isoelectric point of the protein. It should be possible to find an optimal flux and modification to effectively improve the fractination of proteins even with very similar molar masses.

Ara latina

Painovuosi nimekkeestä.

De sacris ignium apud gentiles

Invokaatio: Tou Theou Theou eulogounto kai sunergounto.

Vuorineuvos Dr. Marcus Wallenberg 1/10 1974

Kirje 1.10.1974

Bergsrådet, fil dr Marcus Wallenberg 1.10.1974 Stockholm

Kirje

Esiselvitys puupolttoaineen jalostamisesta torrefiointitekniikalla

Fossiilisten polttoaineiden käytöstä aiheutuvia kasvihuonekaasupäästöjä pyritään vähentämään EU:ssa mm. päästökaupan avulla. Uusiutumattomien polttoaineiden tilalle kehitetään biopolttoaineita, joita voidaan hyödyntää olemassa olevien voimalaitosten polttolaitteistoilla. Biopolttoaineiden etuna on, ettäniiden ei katsota lisäävän hiilidioksidipäästöjä, koska biomassa sitoo itseensä kasvaessaan poltossa vapautuvan määrän hiiltä. Eräs kiinnostavimmista jalostetuista biopolttoaineista on torrefioitu puu, joka vastaa useimmilta ominaisuuksiltaan kivihiiltä ja jota voidaan käyttää hiilivoimalaitoksissa ilman laitteistomuutoksia. Torrefiointi on puun eräänlaista paistamista hapettomissa olosuhteissa 250-270ºC:ssa, jolloin siitä saadaanpoistettua vesi ja osa haihtuvista aineista. Puun väri muuttuu suklaanruskeaksi, se kevenee, ei savuta poltettaessa, hylkii vettä, jauhautuu hyvin sekä sillä on pienet hiukkaspäästöt. Käsitellyn puun ominaisuudet muuttuvat säilyvyydeltään ja käyttöominaisuuksiltaan merkittävästi raaka-aineeseen verrattuna. Torrefioinnilla saavutetaan puulle polttoainekäytön kannalta myös paremmat ja kestävämmät ominaisuudet kuin hiiltämällä. Torrefiointiprosessia on tutkittu jonkin verran ja torrefioidun biomassan polttoa voimalaitosmittakaavassa on kokeiltu pienessä mittakaavassa. Torrefioitu materiaali on alhaisen tiheytensä vuoksi hankalaa ja kallista kuljettaa,joten sen tiheyttä tulee nostaa kuljetuksia varten tiivistämällä esim.pelletöimällä. Torrefionti yhdistettynä pelletöintiin on parhaimmillaan kilpailukykyinen vaihtoehto, kun kivihiiltä korvaavaa biomassaa jalostetaan kaukana käyttöpaikasta ja kuljetetaan irtotavarana aluskuljetuksina. Torrefioitua puuta on tiettävästi poltettu vain hollantilaisessa voimalaitoksessa. Tässä esiselvityksessä kootun tiedon perusteella torrefioidun puupolttoaineen tuottamiseen Suomen olosuhteissa arvioidaan olevan teknis-taloudellisia mahdollisuuksia. Kuitenkin torrefiointiprosessin soveltaminen suomen olosuhteisiin ja kotimaisiin raakaaineisiin vaatii panostusta jatkotutkimukseen ennen varsinaiseen toteutusvaiheeseen siirtymistä.

Development a distributed simulation environment on a cluster of workstations

Simulation has traditionally been used for analyzing the behavior of complex real world problems. Even though only some features of the problems are considered, simulation time tends to become quite high even for common simulation problems. Parallel and distributed simulation is a viable technique for accelerating the simulations. The success of parallel simulation depends heavily on the combination of the simulation application, algorithm and message population in the simulation is sufficient, no additional delay is caused by this environment. In this thesis a conservative, parallel simulation algorithm is applied to the simulation of a cellular network application in a distributed workstation environment. This thesis presents a distributed simulation environment, Diworse, which is based on the use of networked workstations. The distributed environment is considered especially hard for conservative simulation algorithms due to the high cost of communication. In this thesis, however, the distributed environment is shown to be a viable alternative if the amount of communication is kept reasonable. Novel ideas of multiple message simulation and channel reduction enable efficient use of this environment for the simulation of a cellular network application. The distribution of the simulation is based on a modification of the well known Chandy-Misra deadlock avoidance algorithm with null messages. The basic Chandy Misra algorithm is modified by using the null message cancellation and multiple message simulation techniques. The modifications reduce the amount of null messages and the time required for their execution, thus reducing the simulation time required. The null message cancellation technique reduces the processing time of null messages as the arriving null message cancels other non processed null messages. The multiple message simulation forms groups of messages as it simulates several messages before it releases the new created messages. If the message population in the simulation is suffiecient, no additional delay is caused by this operation A new technique for considering the simulation application is also presented. The performance is improved by establishing a neighborhood for the simulation elements. The neighborhood concept is based on a channel reduction technique, where the properties of the application exclusively determine which connections are necessary when a certain accuracy for simulation results is required. Distributed simulation is also analyzed in order to find out the effect of the different elements in the implemented simulation environment. This analysis is performed by using critical path analysis. Critical path analysis allows determination of a lower bound for the simulation time. In this thesis critical times are computed for sequential and parallel traces. The analysis based on sequential traces reveals the parallel properties of the application whereas the analysis based on parallel traces reveals the properties of the environment and the distribution.

Kantate Nr. 214 "Tönet, ihr Pauken"

Soitinnus: lauluäänet (SATB), kuoro, orkesteri.