Multivariable regression analysis and hot-spot stress approach into fatigue life estimations of welded joints

Kolmen eri hitsausliitoksen väsymisikä arvio on analysoitu monimuuttuja regressio analyysin avulla. Regression perustana on laaja S-N tietokanta joka on kerätty kirjallisuudesta. Tarkastellut liitokset ovat tasalevy liitos, krusiformi liitos ja pitkittäisripa levyssä. Muuttujina ovat jännitysvaihtelu, kuormitetun levyn paksuus ja kuormitus tapa. Paksuus effekti on käsitelty uudelleen kaikkia kolmea liitosta ajatellen. Uudelleen käsittelyn avulla on varmistettu paksuus effektin olemassa olo ennen monimuuttuja regressioon siirtymistä. Lineaariset väsymisikä yhtalöt on ajettu kolmelle hitsausliitokselle ottaen huomioon kuormitetun levyn paksuus sekä kuormitus tapa. Väsymisikä yhtalöitä on verrattu ja keskusteltu testitulosten valossa, jotka on kerätty kirjallisuudesta. Neljä tutkimustaon tehty kerättyjen väsymistestien joukosta ja erilaisia väsymisikä arvio metodeja on käytetty väsymisiän arviointiin. Tuloksia on tarkasteltu ja niistä keskusteltu oikeiden testien valossa. Tutkimuksissa on katsottu 2mm ja 6mm symmetristäpitkittäisripaa levyssä, 12.7mm epäsymmetristä pitkittäisripaa, 38mm symmetristä pitkittäisripaa vääntökuormituksessa ja 25mm/38mm kuorman kantavaa krusiformi liitosta vääntökuormituksessa. Mallinnus on tehty niin lähelle testi liitosta kuin mahdollista. Väsymisikä arviointi metodit sisältävät hot-spot metodin jossa hot-spot jännitys on laskettu kahta lineaarista ja epälineaarista ekstrapolointiakäyttäen sekä paksuuden läpi integrointia käyttäen. Lovijännitys ja murtumismekaniikka metodeja on käytetty krusiformi liitosta laskiessa.

Data collection and criticality analysis for cost effective maintenance during the life cycle of a flue gas line

Työn tarkoituksena oli kerätä käyttövarmuustietoa savukaasulinjasta kahdelta suomalaiselta sellutehtaalta niiden käyttöönotosta aina tähän päivään asti. Käyttövarmuustieto koostuu luotettavuustiedoista sekä kunnossapitotiedoista. Kerätyn tiedon avulla on mahdollista kuvata tarkasti laitoksen käyttövarmuutta seuraavilla tunnusluvuilla: suunnittelemattomien häiriöiden lukumäärä ja korjausajat, laitteiden seisokkiaika, vikojen todennäköisyys ja korjaavan kunnossapidon kustannukset suhteessa savukaasulinjan korjaavan kunnossapidon kokonaiskustannuksiin. Käyttövarmuustiedon keräysmetodi on esitelty. Savukaasulinjan kriittisten laitteiden määrittelyyn käytetty metodi on yhdistelmä kyselytutkimuksesta ja muunnellusta vian vaikutus- ja kriittisyysanalyysistä. Laitteiden valitsemiskriteerit lopulliseen kriittisyysanalyysiin päätettiin käyttövarmuustietojen sekä kyselytutkimuksen perusteella. Kriittisten laitteiden määrittämisen tarkoitus on löytää savukaasulinjasta ne laitteet, joiden odottamaton vikaantuminen aiheuttaa vakavimmat seuraukset savukaasulinjan luotettavuuteen, tuotantoon, turvallisuuteen, päästöihin ja kustannuksiin. Tiedon avulla rajoitetut kunnossapidon resurssit voidaan suunnata oikein. Kriittisten laitteiden määrittämisen tuloksena todetaan, että kolme kriittisintä laitetta savukaasulinjassa ovat molemmille sellutehtaille yhteisesti: savukaasupuhaltimet, laahakuljettimet sekä ketjukuljettimet. Käyttövarmuustieto osoittaa, että laitteiden luotettavuus on tehdaskohtaista, mutta periaatteessa samat päälinjat voidaan nähdä suunnittelemattomien vikojen todennäköisyyttä esittävissä kuvissa. Kustannukset, jotka esitetään laitteen suunnittelemattomien kunnossapitokustannusten suhteena savukaasulinjan kokonaiskustannuksiin, noudattelevat hyvin pitkälle luotettavuuskäyrää, joka on laskettu laitteen seisokkiajan suhteena käyttötunteihin. Käyttövarmuustiedon keräys yhdistettynä kriittisten laitteiden määrittämiseen mahdollistavat ennakoivan kunnossapidon oikean kohdistamisen ja ajoittamisen laitteiston elinaikana siten, että luotettavuus- ja kustannustehokkuusvaatimukset saavutetaan.

Integration in project business : mechanisms for integrating customers and the project network during the life-cycle of industrial projects

This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.

Health Related Quality of Life after Childhood Cancer - A Finnish Nationwide survey

The purpose of this Finnish epidemiological nationwide cross-sectional study was to evaluate the Health Related Quality of Life (HRQL) of young people that have survived childhood cancer at least four years after cancer diagnosis. The study aims were (1) to increase knowledge and understanding about the relationship between childhood cancer and its treatment and HRQL of childhood cancer survivors and (2) to identify survivors who need and could benefit from ongoing long-term follow-up, as well as (3) to identify what kind of aftercare the childhood cancer survivors will possibly need. HRQL and fatigue of currently still young survivors of extracranial childhood malignancies were evaluated with self-reports and parent proxy reports. HRQL was measured with age-appropriate generic instruments: PedsQL™, SF-36, 15D, 16D and 17D. Fatigue for children and adolescents aged below 18 years was measured with the PedsQL™ Multidimensional Fatigue Scale Finnish version. PedsQL™ parent-proxy and the PedsQL™ Multidimensional Fatigue Scale Parentproxy instruments were used to assess the perception of the parents on HRQL and fatigue of their children and adolescents. Postal-survey questionnaires were mailed to 852 childhood cancer survivors aged 11-27 years and their randomly selected gender-, age and living-place matched controls, as well as under 18-year-old children´s parents. A total of 474 survivors, 595 controls, 209 survivor’s parent and 253 control’s parent replied. The mean age of survivors at the time of the study was 18.4 years. The mean length of survival was 12.3 years, and the mean age at diagnosis 5.5 years. The most of the Finnish childhood cancer survivors evaluated that their HRQL as good. Survivors rated their HRQL equal or higher than their controls. The only dimension where the survivors scored poorer than the controls was the 15D mobility dimension. Survivors of childhood cancer did not suffer from significant fatigue. There were subgroups of childhood cancer survivors who had poorer level of HRQL, and suffered from fatigue more than the reference group. The demographic factors that associated with poorer HRQL were female gender, greater weight, living alone, need of remedial education, an additional non-cancer diagnosis, survivors with siblings, and self-reported unhappiness. Disease-related factors that associated with poorer HRQL were higher age at the time of diagnosis, the diagnosis of Wilms tumor, neuroblastoma, or osteosarcoma, and treatment with stem cell transplantation. The factors associated with more fatigue in survivors were male gender, older age at evaluation, the need of remedial education at school, lower overall average grade in the latest school marks report, length of survival more than 10 years, lower HRQL-scores, and a sarcoma diagnosis. However, all the used demographic and disease related factors explained only about one third of the variation in the HRQL scores. In open questions, the survivors were most worried about their physical health, but were also worried about their mental health, cancer inheritance, late-effects, and fertility and relapse issues. It seems that there are subgroups of survivors who need and could benefit from ongoing long-term follow-up. In the future, the survivors of childhood cancer need more information about their physical and mental health, as well as on their cancer inheritance, possible late-effects including fertility issues, and on the risk of relapse.

Integration of Economics into Life Cycle Assessment in the Finnish Pulp and Paper Industry

Taloudellisen laskennan yhdistäminen elinkaariarviointiin (LCA) on alkanut kiinnostaa eri teollisuuden aloja maailmanlaajuisesti viime aikoina. Useat LCA-tietokoneohjelmat sisältävät kustannuslaskentaominaisuuksia ja yksittäiset projektit ovat yhdistäneet ympäristö- ja talouslaskentamenetelmiä. Tässä projektissa tutkitaan näiden yhdistelmien soveltuvuutta suomalaiselle sellu- ja paperiteollisuudelle, sekä kustannuslaskentaominaisuuden lisäämistä KCL:n LCA-ohjelmaan, KCL-ECO 3.0:aan. Kaikki tutkimuksen aikana löytyneet menetelmät, jotka yhdistävät LCA:n ja taloudellista laskentaa, on esitelty tässä työssä. Monet näistä käyttävät elinkaarikustannusarviointia (LCCA). Periaatteessa elinkaari määritellään eri tavalla LCCA:ssa ja LCA:ssa, mikä luo haasteita näiden menetelmien yhdistämiselle. Sopiva elinkaari tulee määritellä laskennan tavoitteiden mukaisesti. Työssä esitellään suositusmenetelmä, joka lähtee suomalaisen sellu- ja paperiteollisuuden erikoispiirteistä. Perusvaatimuksena on yhteensopivuus tavanomaisesti paperin LCA:ssa käytetyn elinkaaren kanssa. Menetelmän yhdistäminen KCL-ECO 3.0:aan on käsitelty yksityiskohtaisesti.

Improving Quality of Life of Patients With Schizophrenia In Acute Psychiatric Wards

The overall goal of this study was to identify means by which the quality of life (QoL) of patients with schizophrenia could be improved in acute psychiatric wards. First, subjective QoL of patients (n=35) was explored. Second, two different QoL instruments (EuroQoL-5D, EQ-5D; Quality of Life Enjoyment and Satisfaction Questionnaire Short Form, Q-LES-Q SF) were examined. Third, patients’ (n=35) and nurses’ (n=29) perceptions of nursing interventions to support patients’ QoL were examined. Fourth, the effect of three different patient education methods on patients’ QoL (n=311) was compared. The data were collected during the period 2005-2007. Patients named health, family, leisure activities, work or study, and social relationships most frequently as their important QoL areas. It emerged that patients’ QoL was impaired. Examination of two QoL instruments showed that the EQ-5D has moderate and the Q-LES-Q SF good internal consistency. Moreover, both instruments proved to be reasonably valid and feasible for use with patients with schizophrenia. Altogether six nursing interventions which nurses use to support patients’ QoL, and which should be further developed were identified from nurses’ descriptions: interventions related to care planning, empowering interventions, social interventions, activating interventions, security interventions, and interventions to support physical health. Evaluation of different patient education methods showed that patients’ QoL improved significantly during follow-up. No significant differences between groups were found. In light of the findings it is recommended to assess QoL of patients with schizophrenia as a basis for care planning and care evaluation in clinical settings. Valid and feasible instruments should be used in this assessment. Moreover, it is recommend that nursing interventions should be further developed to better improve patients’ QoL.

Effects of life cycle profits on the profitability of industrial heavy duty cranes

The goal of the thesis was to investigate how much after-sales profits a crane sale generates over the life cycle of the crane and the effects of these after-sales profits on the overall profitability of the crane. The thesis utilizes theories about life cycle costing from an equipment and service supplier’s point of view. However, instead of costs, the thesis is focused on the life cycle after-sales profits from maintenance services and spare parts provided for the sold crane. The case study approach was chosen and a total of five cranes from three different segments were investigated. An eight-step life cycle profit calculation model was developed in order to analyze the chosen cases’ life cycle profits systematically. The results of the investigation suggest that the life cycle after-sales profits are significant in value. In the case analyses they accounted for between 20% and 44% of the overall life cycle profits of the case cranes. The after-sales profits should be taken into account already in the pricing when offering a crane to a customer.

Psychological well-being of the parents and child development, behavior, and quality of life in very low birth weight infants

The parents of premature infants, especially the mothers, are at increased risk for distress. Infants born prematurely are at risk for developmental problems. The aim of this study was to investigate whether the psychological well-being of both parents is associated with child development in very low birth weight (VLBW, ≤1500g) children. The burden of prematurity-related morbidity to the children and to the family was also assessed. A cohort of 201 VLBW infants born during 2001–2006 in the Turku University Hospital, Finland, and their parents were studied (I–IV). One study included a control group (n=166) of full-term infants (IV). The psychological well-being of the parents was evaluated by assessments of depressive symptoms, parenting stress, the sense of coherence and general family functioning. Cognitive, behavioral, and socio-emotional development, and the health-related quality of life (HRQoL) of the children were determined when the children were 2 to 8 years old. The psychological well-being of the parents was associated with the cognitive, behavioral and social development of the VLBW children. The VLBW infants with prematurity-related morbidities had a poorer HRQoL and the general functioning of the family was inferior compared to the control children and their families. 64.5% of the VLBW children survived without morbidities. Most of the VLBW children did not have significant behavior problems (93%), had normal social skills (63%), had no emotional problems (64%), and had no problems in executive functioning (62%). Only 3% of the surviving VLBW infants had significant cognitive delay. In conclusion, the depressive symptoms and stress of the parents can be risk factors for disadvantageous child development, while a strong sense of coherence can be protective. Parents of the premature children with developmental delays might also experience more depressive symptoms and stress than other parents. Prematurity-related morbidities were a burden to the VLBW child as well as to the family.