Alternative Energy Conversion Systems for a Micro Scale Wind Turbine

This Master's thesis deals with a Micro Scale Wind Wind Turbine application. The thesis consists of nine chapters. The first chapter is an introduction to the philosophy of a small scale wind turbine application. The second defines concepts, and lists the requirements. The third presents the whole application for an On-Grid , and for an Off-Grid arrangement, with main concentration on lighting, heating, and energy storage. The fourth deals with the Inverter's technology, which are used for the conversion of the produced power. The fifth chapter presents the available storage technology and it's possibilities. The sixth deals with the system, and the technological means used for the implementation. The seventh presents the PLC device, which was used as the controller for the management of the whole application. The eighth deals with the concept and the control application philosophy that the PLC involves. And the final chapter presents conclusions and ideas for further considerations.

A Practical Micro Mechanical Model Based Local Approach Methodology for the Analysis of Ductile Fracture of Welded T-Joints

This thesis concentrates on developing a practical local approach methodology based on micro mechanical models for the analysis of ductile fracture of welded joints. Two major problems involved in the local approach, namely the dilational constitutive relation reflecting the softening behaviour of material, and the failure criterion associated with the constitutive equation, have been studied in detail. Firstly, considerable efforts were made on the numerical integration and computer implementation for the non trivial dilational Gurson Tvergaard model. Considering the weaknesses of the widely used Euler forward integration algorithms, a family of generalized mid point algorithms is proposed for the Gurson Tvergaard model. Correspondingly, based on the decomposition of stresses into hydrostatic and deviatoric parts, an explicit seven parameter expression for the consistent tangent moduli of the algorithms is presented. This explicit formula avoids any matrix inversion during numerical iteration and thus greatly facilitates the computer implementation of the algorithms and increase the efficiency of the code. The accuracy of the proposed algorithms and other conventional algorithms has been assessed in a systematic manner in order to highlight the best algorithm for this study. The accurate and efficient performance of present finite element implementation of the proposed algorithms has been demonstrated by various numerical examples. It has been found that the true mid point algorithm (a = 0.5) is the most accurate one when the deviatoric strain increment is radial to the yield surface and it is very important to use the consistent tangent moduli in the Newton iteration procedure. Secondly, an assessment of the consistency of current local failure criteria for ductile fracture, the critical void growth criterion, the constant critical void volume fraction criterion and Thomason's plastic limit load failure criterion, has been made. Significant differences in the predictions of ductility by the three criteria were found. By assuming the void grows spherically and using the void volume fraction from the Gurson Tvergaard model to calculate the current void matrix geometry, Thomason's failure criterion has been modified and a new failure criterion for the Gurson Tvergaard model is presented. Comparison with Koplik and Needleman's finite element results shows that the new failure criterion is fairly accurate indeed. A novel feature of the new failure criterion is that a mechanism for void coalescence is incorporated into the constitutive model. Hence the material failure is a natural result of the development of macroscopic plastic flow and the microscopic internal necking mechanism. By the new failure criterion, the critical void volume fraction is not a material constant and the initial void volume fraction and/or void nucleation parameters essentially control the material failure. This feature is very desirable and makes the numerical calibration of void nucleation parameters(s) possible and physically sound. Thirdly, a local approach methodology based on the above two major contributions has been built up in ABAQUS via the user material subroutine UMAT and applied to welded T joints. By using the void nucleation parameters calibrated from simple smooth and notched specimens, it was found that the fracture behaviour of the welded T joints can be well predicted using present methodology. This application has shown how the damage parameters of both base material and heat affected zone (HAZ) material can be obtained in a step by step manner and how useful and capable the local approach methodology is in the analysis of fracture behaviour and crack development as well as structural integrity assessment of practical problems where non homogeneous materials are involved. Finally, a procedure for the possible engineering application of the present methodology is suggested and discussed.

The progress and obstacles of implementing and improving e-government in Islamic Republic of Iran

To improving efficiency and transparency of government services, government authorities may increase the frequency of interaction between citizens and government as well as improving the quality of the government services and trust. Electronic Government (E-Government) in definition is the delivery of government services to citizens, businesses, and government organizations through the use of internet, web based applications, and Information and Communication Technologies (ICTs) is the solution to build more reliable and efficient contact with citizens. Like the developing and developed countries, Iran also has been processing the various aspects of ICT, IT, and e-Government. Though, in order to implement and improve e-Government; Iran has faced with some obstacles. Therefore, the purpose of this thesis is to study progress of e- Government and identify obstacles of implementing and improving e Government in Iran. In this thesis, based on the literature review, the progress of e-Government in Iran was studied and various obstacles were identified. Therefore, as a result, e- Government of Iran is said to be in the transactional stage of the United Nations’ e-Government maturity stages. In addition, establishing more reliable, efficient, and accurate e-Government initiatives, plans, guidelines, and strategies will extremely enhance e-Government status of Iran. On the other hand, the needs of the citizens should always be under consideration when implementing and improving e-Government services; because citizens are considered to be at the core of every e-Government services and the responsibilities of the authorities.

Contemporary art galleries innovation management

This paper focuses on capabilities implemented by micro firms in actual art sector. After last two decades, since establishment of new art selling ventures has started, current art market of Russia is still in its emerging phase. Art galleries, who preserve to be the main place where the art is purchased, today have to survive in the hostile business environment. Whereas the rivalry does not affect gallery performance significantly, the major challenges for these micro firms are customer unawareness and shortages of financing. The business environment requires capabilities inherited by galleries to sustain the performance. Such capabilities may lead to innovation adoption. This paper represents the first explorative study on contemporary art market of Saint-Petersburg. In order to gain an understanding of the topic, qualitative method was chosen and in-depth interviews were done with 7 different micro firms using key informant method.

Micro Data Repositories: Increasing the Value of Research on the Web

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

A Business Incubator, Accelerator, or Coworking Space? Case Health Innovation Village at GE

Health Innovation Village at GE is one of the new communities targeted for startup and growth-oriented companies. It has been established at the premises of a multinational conglomerate that will promote networking and growth of startup companies. The concept combines features from traditional business incubators, accelerators, and coworking spaces. This research compares Health Innovation Village to these concepts regarding its goals, target clients, source of income, organization, facilities, management, and success factors. In addition, a new incubator classification model is introduced. On the other hand, Health Innovation Village is examined from its tenants’ perspective and improvements are suggested. The work was implemented as a qualitative case study by interviewing GE staff with connections to Health Innovation Village as well as startup entrepreneurs and employees’ working there. The most evident features of Health Innovation Village correspond to those of business incubators although it is atypical as a non-profit corporate business incubator. Strong network orientation and connections to venture capitalists are common characteristics of these new types of accelerators. The design of the premises conforms to the principles of coworking spaces, but the services provided to the startup companies are considerably more versatile than the services offered by coworking spaces. The advantages of Health Innovation Village are that there are first-class premises and exceptionally good networking possibilities that other types of incubators or accelerators are not able to offer. A conglomerate can also provide multifaceted special knowledge for young firms. In addition, both GE and the startups gained considerable publicity through their cooperation, indeed a characteristic that benefits both parties. Most of the expectations of the entrepreneurs were exceeded. However, communication and the scope of cooperation remain challenges. Micro companies spend their time developing and marketing their products and acquiring financing. Therefore, communication should be as clear as possible and accessible everywhere. The startups would prefer to cooperate significantly more, but few have the time available to assume the responsibility of leadership. The entrepreneurs also expected to have more possibilities for cooperation with GE. Wider collaboration might be accomplished by curation in the same way as it is used in the well-functioning coworking spaces where curators take care of practicalities and promote cooperation. Communication issues could be alleviated if the community had its own Intranet pages where all information could be concentrated. In particular, a common calendar and a room reservation system could be useful. In addition, it could be beneficial to have a section of the Intranet open for both the GE staff and the startups so that those willing to share their knowledge and those having project offers could use it for advertising.