Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.

Capturing Weak Signals for Foresight Building

Tulevaisuuden hahmottamisen merkitys heikkojen signaalien avulla on korostunut viime vuosien aikana merkittävästi,koska yrityksen liiketoimintaympäristössä tapahtuvia muutoksia on ollut yhä vaikeampaa ennustaa historian perusteella. Liiketoimintaympäristössä monien muutoksien merkkejä on ollut nähtävissä, mutta niitä on ollut vaikea havaita. Heikkoja signaaleja tunnistamalla ja keräämällä sekä reagoimalla tilanteeseen riittävän ajoissa, on mahdollista saavuttaa ylivoimaista kilpailuetua. Kirjallisuustutkimus keskittyy heikkojen signaalien tunnistamisen haasteisiin liiketoimintaympäristöstä, signaalien ja informaation kehittymiseen sekä informaation hallintaan organisaatiossa. Kiinnostus näihin perustuu tarpeeseen määritellä heikkojen signaalien tunnistamiseen vaadittava prosessi, jonka avulla heikot signaalit voidaan huomioida M-real Oyj:n päätöksenteossa. Kirjallisuustutkimus osoittaa selvästi sen, että heikkoja signaaleita on olemassa ja niitä pystytään tunnistamaan liiketoimintaympäristöstä. Signaaleja voidaan rikastuttaa yrityksessä olevalla tietämyksellä ja hyödyntää edelleen päätöksenteossa. Vertailtaessa sekä kirjallisuustutkimusta että empiiristä tutkimusta tuli ilmi selkeästi tiedon moninaisuus; määrä,laatu ja tiedonsaannin oikea-aikaisuus päätöksenteossa. Tutkimuksen aikana kehittyi prosessimalli tiedon suodattamiselle, luokittelulle ja heikkojen signaalien tunnistamiselle. Työn edetessä prosessimalli kehittyi osaksi tässä työssä kehitettyä kokonaisuutta 'Weak Signal Capturing' -työkalua. Monistamalla työkalua voidaan kerätä heikkoja signaaleja eri M-realin liiketoiminnan osa-alueilta. Tietoja systemaattisesti kokoamalla voidaan kartoittaa tulevaisuutta koko M-realille.

Moottoriajoneuvon suorituskyvyn mittausjärjestelmä

Työn tarkoituksena oli toteuttaa moottoriajoneuvon suorituskyvyn mittaukseen käytettävä järjestelmä. Järjestelmä koostuu sylinterin muotoisesta rullasta ja tiedonkeruujärjestelmästä. Rullaa, jonka hitausmomentti tunnetaan kiihdytetään ajoneuvon vetopyörien välityksellä ja mitatuista arvoista lasketaan teho ja vääntömomenttiarvot moottorin kierrosluvun funktiona. Tiedonkeruu tapahtuu PC-mikrotietokoneen avulla, johon on liitetty tiedonkeruukortti. PC-mikrotietokone muodostaa käyttöliittymän, jonka avulla saadut tulokset esitetään kuvaajien avulla käyttäjälle. Käyttöliittymän avulla suoritetaan myös tulosten talletus ja raportin tulostus. Teoriaosassa tarkastellaan suorituskyvyn mittaamiseen käytettyjä menetelmiä ja laitteistoja, sekä tiedonkeruujärjestelmän rakennetta ja sen valintaan vaikuttavia tekijöitä. Käytännön osassa suunnitellaan muokkainkortti, jonka avulla erilaisilta antureilta saadut signaalit voidaan sovittaa tiedonkeruukortin tuloalueelle sopiviksi. Myös käyttöliittymän toimintaa ja sen rakentamiseen käytettyjä työkaluja tarkastellaan.

Performance benchmarking and incentive regulation – considerations of directing signals for electricity distribution companies

After the restructuring process of the power supply industry, which for instance in Finland took place in the mid-1990s, free competition was introduced for the production and sale of electricity. Nevertheless, natural monopolies are found to be the most efficient form of production in the transmission and distribution of electricity, and therefore such companies remained franchised monopolies. To prevent the misuse of the monopoly position and to guarantee the rights of the customers, regulation of these monopoly companies is required. One of the main objectives of the restructuring process has been to increase the cost efficiency of the industry. Simultaneously, demands for the service quality are increasing. Therefore, many regulatory frameworks are being, or have been, reshaped so that companies are provided with stronger incentives for efficiency and quality improvements. Performance benchmarking has in many cases a central role in the practical implementation of such incentive schemes. Economic regulation with performance benchmarking attached to it provides companies with directing signals that tend to affect their investment and maintenance strategies. Since the asset lifetimes in the electricity distribution are typically many decades, investment decisions have far-reaching technical and economic effects. This doctoral thesis addresses the directing signals of incentive regulation and performance benchmarking in the field of electricity distribution. The theory of efficiency measurement and the most common regulation models are presented. The chief contributions of this work are (1) a new kind of analysis of the regulatory framework, so that the actual directing signals of the regulation and benchmarking for the electricity distribution companies are evaluated, (2) developing the methodology and a software tool for analysing the directing signals of the regulation and benchmarking in the electricity distribution sector, and (3) analysing the real-life regulatory frameworks by the developed methodology and further develop regulation model from the viewpoint of the directing signals. The results of this study have played a key role in the development of the Finnish regulatory model.

Towards input/output-free modelling of linear infinite-dimensional systems in continuous time

This dissertation describes a networking approach to infinite-dimensional systems theory, where there is a minimal distinction between inputs and outputs. We introduce and study two closely related classes of systems, namely the state/signal systems and the port-Hamiltonian systems, and describe how they relate to each other. Some basic theory for these two classes of systems and the interconnections of such systems is provided. The main emphasis lies on passive and conservative systems, and the theoretical concepts are illustrated using the example of a lossless transfer line. Much remains to be done in this field and we point to some directions for future studies as well.

Solving Leontief Input-Output Model with Trapezoidal Fuzzy Numbers and Gauss-Seidel Algorithm

In this work a fuzzy linear system is used to solve Leontief input-output model with fuzzy entries. For solving this model, we assume that the consumption matrix from di erent sectors of the economy and demand are known. These assumptions heavily depend on the information obtained from the industries. Hence uncertainties are involved in this information. The aim of this work is to model these uncertainties and to address them by fuzzy entries such as fuzzy numbers and LR-type fuzzy numbers (triangular and trapezoidal). Fuzzy linear system has been developed using fuzzy data and it is solved using Gauss-Seidel algorithm. Numerical examples show the e ciency of this algorithm. The famous example from Prof. Leontief, where he solved the production levels for U.S. economy in 1958, is also further analyzed.

Broadband excitation in the system identification of active magnetic bearing rotor systems

One of the targets of the climate and energy package of the European Union is to increase the energy efficiency in order to achieve a 20 percent reduction in primary energy use compared with the projected level by 2020. The energy efficiency can be improved for example by increasing the rotational speed of large electrical drives, because this enables the elimination of gearboxes leading to a compact design with lower losses. The rotational speeds of traditional bearings, such as roller bearings, are limited by mechanical friction. Active magnetic bearings (AMBs), on the other hand, allow very high rotational speeds. Consequently, their use in large medium- and high-speed machines has rapidly increased. An active magnetic bearing rotor system is an inherently unstable, nonlinear multiple-input, multiple-output system. Model-based controller design of AMBs requires an accurate system model. Finite element modeling (FEM) together with the experimental modal analysis provides a very accurate model for the rotor, and a linearized model of the magneticactuators has proven to work well in normal conditions. However, the overall system may suffer from unmodeled dynamics, such as dynamics of foundation or shrink fits. This dynamics can be modeled by system identification. System identification can also be used for on-line diagnostics. In this study, broadband excitation signals are adopted to the identification of an active magnetic bearing rotor system. The broadband excitation enables faster frequency response function measurements when compared with the widely used stepped sine and swept sine excitations. Different broadband excitations are reviewed, and the random phase multisine excitation is chosen for further study. The measurement times using the multisine excitation and the stepped sine excitation are compared. An excitation signal design with an analysis of the harmonics produced by the nonlinear system is presented. The suitability of different frequency response function estimators for an AMB rotor system are also compared. Additionally, analytical modeling of an AMB rotor system, obtaining a parametric model from the nonparametric frequency response functions, and model updating are discussed in brief, as they are key elements in the modeling for a control design. Theoretical methods are tested with a laboratory test rig. The results conclude that an appropriately designed random phase multisine excitation is suitable for the identification of AMB rotor systems.

The effects of welding heat input on the usability of high strength steels in welded structures

High strength steel (HSS) has been in use in workshops since the 1980s. At that time, the significance of the term HSS differed from the modern conception as the maximum yield strength of HSSs has increased nearly every year. There are three different ways to make HSS. The first and oldest method is QT (quenched and tempered) followed by the TMCP (thermomechanical controlled process) and DQ (direct quenching) methods. This thesis consists of two parts, the first of which part introduces the research topic and discusses welded HSS structures by characterizing the most important variables. In the second part of the thesis, the usability of welded HSS structures is examined through a set of laboratory tests. The results of this study explain the differences in the usability of the welded HSSs made by the three different methods. The results additionally indicate that usage of different HSSs in the welded structures presumes that manufacturers know what kind of HSS they are welding. As manufacturers use greater strength HSSs in welded structures, the demands for welding rise as well. Therefore, during the manufacturing process, factors such as heat input, cooling time, weld quality, and more must be under careful observation.

Effect of heat input on the mechanical properties of welded joints in high strength steels

Experiments were carried out to determine the properties of the welded joints in 8mm thick high-strength steels produced by quenching and tempering and thermomechanical rolling with accelerated cooling (tensile strength 821–835 MPa). The dependence of the strength, elongation, hardness, impact energy and crack opening displacement on the heat input in the range 1.0–0.7 kJ mm21 was determined. The results show that the dependence of the strength of the welded joints decreases and that of the elongation increases. The heat input has only a slight effect on the impact energy and crack opening displacement in the heat-affected zone.