Design and Control of Permanent Magnet Synchronous Machine for Hybrid Electric Vehicle

This master’s thesis mainly focuses on the design requirements of an Electric drive for Hybrid car application and its control strategy to achieve a wide speed range. It also emphasises how the control and performance requirements are transformed into its design variables. A parallel hybrid topology is considered where an IC engine and an electric drive share a common crank shaft. A permanent magnet synchronous machine (PMSM) is used as an electric drive machine. Performance requirements are converted into Machine design variables using the vector model of PMSM. Main dimensions of the machine are arrived using analytical approach and Finite Element Analysis (FEA) is used to verify the design and performance. Vector control algorithm was used to control the machine. The control algorithm was tested in a low power PMSM using an embedded controller. A prototype of 10 kW PMSM was built according to the design values. The prototype was tested in the laboratory using a high power converter. Tests were carried out to verify different operating modes. The results were in agreement with the calculations.

Preparation and Investigation of Bio-coal Mixture Fuels Used in Large Diesel Engines

Coal slurry was of vital interest during the last century due to its potential as an alternative fuel where liquid fuels were necessary. Recently, environmental impacts of the traditional fuels, similarities of bio-coal to that of coal, and huge bio-coal supply has attracted the attention to prepare bio-coal slurries as a new fuel. Rudolf Diesel who invented the diesel engine on 1895 was of the opinion that diesel engines are capable to use different kinds of fuels due to the special design. He tried some kind of vegetable oil to operate on his IC engine. Recently, due to high energy density and more environmentally friendly fuel, researchers believe that bio-coal slurries could act as a new alternative fuel in large diesel engines. Loads of research on different kinds of bio-coal slurry were done by the other researchers worldwide and a lot of progress to boost slurry’s quality were achieved recently. The present study aims to achieve the ideal condition of different factors affecting on the quality of bio-coal slurry. One charcoal sample and two kinds of torrefied wood were used to investigate and compare the reaction of various factors. The results show a great gap between the quality of slurries made of different samples and more researches are necessary to fully understand the impact of the different parameter and improving the quality.

Numerical Modelling of Combustion and Emission Formation in a Diesel Engine with Different Fuel Injection Characteristics

Päästöjen vähentäminen on ollut viime vuosina tärkeässä osassa polttomoottoreita kehitettäessä.Monet viralliset tahot asettavat uusia tiukempia päästörajoituksia. Päästörajatovat tyypillisesti olleet tiukimmat autoteollisuuden valmistamille pienille nopeakäyntisille diesel-moottoreille, mutta viime aikoina paineita on kohdistunut myös suurempiin keskinopeisiin ja hidaskäyntisiin diesel-moottoreihin. Päästörajat ovat erilaisia riippuen moottorin tyypistä, käytetystä polttoaineesta ja paikasta missä moottoria käytetään johtuen erilaisista paikallisista laeista ja asetuksista. Eniten huomiota diesel-moottorin päästöissä täytyy kohdistaa typen oksideihin, savun muodostukseen sekä partikkeleihin. Laskennallisen virtausmekaniikan (CFD) avulla on hyvät mahdollisuudet tutkia diesel-moottorin sylinterissä tapahtuvia ilmiöitä palamisen aikana. CFD on hyödyllinen työkalu arvioitaessa moottorin suorituskykyä ja päästöjen muodostumista. CFD:llä on mahdollista testata erilaisten parametrien ja geometrioiden vaikutusta ilman kalliita moottorinkoeajoja. CFD:tä voidaan käyttää myös opetustarkoituksessa lisäämään paloprosessin tuntemusta. Tulevaisuudessa palamissimuloinnit CFD:llä tulevat epäilemättä olemaan tärkeä osa moottorin kehityksessä. Tässä diplomityössä on tehty palamissimuloinnit kahteen erilaisilla poittoaineenruiskutuslaitteistoilla varustettuun Wärtsilän keskinopeaan diesel-moottoriin. W46 moottorin ruiskutuslaitteisto on perinteinen mekaanisesti ohjattu pumppusuutin ja W46-CR moottorissa on elektronisesti ohjattu 'common rail' ruiskutuslaitteisto. Näiden moottorien ja käytössä olevien ruiskutusprofiilien lisäksi on simuloinneilla testattu erilaisia uusia ruiskutusprofiileja, jotta erityyppisten profiilien hyvät ja huonot ominaisuudet tulisivat selville. Matalalla kuormalla kiinnostuksen kohteena on nokipäästöjen muodostus ja täydellä kuormalla NOx-päästöjen muodostus ja polttoaineen kulutus. Simulointien tulokset osoittivat, että noen muodostusta matalalla kuormalla voidaan selvästi vähentää monivaiheisella ruiskutuksella, jossa yksi ruiskutusjakso jaetaan kahteen tai useampaan jaksoon. Erityisen tehokas noen vähentämisessä vaikuttaa olevan ns. jälkiruiskutus (post injection). Matalat NOx-päästöt ja hyvä polttoaineen kulutus täydellä kuormalla on mahdollista saavuttaaasteittain nostettavalla ruiskutusnopeudella.

Messaging Application Engine for Symbian Platform

Tämä diplomityö kuvaa viestintä sovelluksen ytimen kehitystyön Symbian-alustalle. Koko sovelluksen vaatimuksena oli vastaamattomiin puheluihin vastaaminen ennalta määritellyillä tekstiviesteillä käyttäjän määrittelemien sääntöjen mukaisesti. Ei-toiminnallisia vaatimuksia olivat resurssien käytön vähentäminen ja uudelleenkäytön mahdollistaminen. Täten tämän työn tavoitteena oli kehittää ydin, joka kapseloi sovelluksen sellaisen toiminnallisuuden, joka on käyttöliittymästä riippumatonta ja uudelleenkäytettävää. Kehitystyössä ohjasi Unified Process, joka on iteroiva, käyttötapauksien ohjaama ja arkkitehtuurikeskeinen ohjelmistoprosessi. Se kannusti käyttämään myös muita teollisuudenalan vakiintuneita menetelmiä, kuten suunnittelumalleja ja visuaalista mallintamista käyttäen Unified Modelling Languagea. Suunnittelumalleja käytettiin kehitystyön aikana ja ohjelmisto mallinnettiin visuaalisesti suunnittelun edistämiseksi ja selkiyttämiseksi. Alustan palveluita käytettiin hyväksi kehitysajan ja resurssien käytön minimoimiseksi. Ytimen päätehtäviksi määrättiin viestien lähettäminen sekä sääntöjen talletus ja tarkistaminen. Sovelluksen eri alueet, eli sovelluspalvelin ja käyttöliittymää, pystyivät käyttämään ydintä ja sillä ei ollut riippuvuuksia käyttöliittymätasolle. Täten resurssien käyttö väheni ja uudelleenkäytettävyys lisääntyi. Viestien lähettäminen toteutettiin Symbian-alustan menetelmin. Sääntöjen tallettamiseen tehtiin tallennuskehys, joka eristää sääntöjen sisäisen ja ulkoisen muodon. Tässä tapauksessa ulkoiseksi tallennustavaksi valittiin relaatiotietokanta. Sääntöjen tarkastaminen toteutettiin tavanomaisella olioiden yhteistoiminnalla. Päätavoite saavutettiin. tämä ja muut hyviksi arvioidut lopputulokset, kuten uudelleenkäytettävyys ja vähentynyt resurssien käyttö, arveltiin juontuvan suunnittelumallien ja Unified Processin käytöstä. Kyseiset menetelmät osoittivat mukautuvansa pieniinkin projekteihin. Menetelmien todettiin myös tukevan ja kannustavan kehitystyön aikaista oppimista, mikä oli välttämätöntä tässä tapauksessa.

Antenna Design for Contactless IC Card Applications

Contactless integrated circuit cards are one form of application of radio frequency identification. They are used in applications such as access control, identification, and payment in public transport. The contactless IC cards are passive which means that both the data and the energy are transferred to the card without contact using inductive coupling. Antenna design and optimization of the design for contactless IC cards defined by ISO/IEC14443 is studied. The basic operation principles of contactless system are presented and the structure of contactless IC card is illustrated. The structure was divided between the contactless chip and the antenna. The operation of the antenna was covered in depth and the parameters affecting to the performance of the antenna were presented. Also the different antenna technologies and connection technologies were provided. The antenna design process with the parameters and the design tools isillustrated and optimization of the design is studied. To make the design process more ideal a target of development was discovered, which was the implementation of test application. The optimization of the antenna design was presented based on the optimization criteria defined in this study. The solution for the implementation of these criteria and the effect of each criterion was found. For enhancing the performance of the antenna a focus for future study was proposed.

Web-sovellus Google App Engine alustalle

App Engine on lyhenne englanninkielisistä termeistä application, sovellus ja engine, moottori. Kyseessä on Google, Inc. -konsernin toteuttama kaupallinen palvelu, joka noudattaa pilvimallin tietojenkäsittelyn periaatteita ja mahdollistaa asiakkaan oman sovelluskehityksen. Järjestelmään on mahdollista ohjelmoida itse ideoitu palvelu Internet - verkon välityksellä käytettäväksi, joko yksityisesti tai julkisesti. Kyse on siis hajautetusta palvelinjärjestelmästä, jonka tarjoaa dynaamisesti kuormitukseen sopeutuvan sovellusalustan, jossa asiakas ei vuokraa virtuaalikoneita. Myös järjestelmän tarjoama tallennuskapasiteetti on saatavilla joustavasti. Itse kandidaatintyössä syvennytään yksityiskohtaisemmin sovelluksen toteuttamiseen palvelussa, rajoitteisiin ja soveltuvuuteen. Alussa käydään läpi pilvikäsite, joista monilla tietokoneiden käyttäjillä on epäselvä käsitys. Erilaisia kokonaisuuksia voidaan luoda erittäin monella tavalla, joista rajaamme käsittelyn kohteeksi toteuttamiskelpoiset yleiset ratkaisut.

Pilvisovelluskehitys Google App Engine -pilvisovellusalustalla

Tämä Diplomityö keskittyy tutkimaan pilvisovelluskehitystä Google App Engine – pilvisovellusalustalle perustuen kuusi –vaiheiseen vesiputousmalliin sekä tutkimaan Google App Engine -pilvisovellusalustan tarjoamia mahdollisuuksia ja rajoituksia sovelluskehityksen muodossa. Tutkimuksen perusteella kuusi –vaiheinen vesiputousmalli soveltuu pilvisovelluskehitykseen,mikäli vaatimusmäärittely on tarkka jo sovelluskehityksen alkuvaiheessa. Tutkimuksen tuloksena syntyi vaatimusmäärittely MikkoMail –pilvisovellukselle. Vaatimusmäärittelyn pohjalta luotiin MikkoMail –pilvisovellus Google App Engine –pilvisovellusalustalle. Google App Engine –pilvisovellusalusta tukee vain Python- ja Java –ohjelmointikieliä eikä sisällä lainkaan ulkoista tietokantapalveluiden tukea. Tästä syystä Google App Engine -pilvisovellusalusta soveltuu pieniin, keskisuuriin ja pilottiprojektinomaisiin sovelluskehitysprojekteihin.

Search Engine Optimization Methods & Search Engine Indexing for CMS Applications

Search engine optimization & marketing is a set of processes widely used on websites to improve search engine rankings which generate quality web traffic and increase ROI. Content is the most important part of any website. CMS web development is now become very essential for most of organizations and online businesses to develop their online system and websites. Every online business using a CMS wants to get users (customers) to make profit and ROI. This thesis comprises a brief study of existing SEO methods, tools and techniques and how they can be implemented to optimize a content base website. In results, the study provides recommendations about how to use SEO methods; tools and techniques to optimize CMS based websites on major search engines. This study compares popular CMS systems like Drupal, WordPress and Joomla SEO features and how implementing SEO can be improved on these CMS systems. Having knowledge of search engine indexing and search engine working is essential for a successful SEO campaign. This work is a complete guideline for web developers or SEO experts who want to optimize a CMS based website on all major search engines.

Optimization as a method of search engine marketing

This study is dedicated to search engine marketing (SEM). It aims for developing a business model of SEM firms and to provide explicit research of trustworthy practices of virtual marketing companies. Optimization is a general term that represents a variety of techniques and methods of the web pages promotion. The research addresses optimization as a business activity, and it explains its role for the online marketing. Additionally, it highlights issues of unethical techniques utilization by marketers which created relatively negative attitude to them on the Internet environment. Literature insight combines in the one place both technical and economical scientific findings in order to highlight technological and business attributes incorporated in SEM activities. Empirical data regarding search marketers was collected via e-mail questionnaires. 4 representatives of SEM companies were engaged in this study to accomplish the business model design. Additionally, the fifth respondent was a representative of the search engine portal, who provided insight on relations between search engines and marketers. Obtained information of the respondents was processed qualitatively. Movement of commercial organizations to the online market increases demand on promotional programs. SEM is the largest part of online marketing, and it is a prerogative of search engines portals. However, skilled users, or marketers, are able to implement long-term marketing programs by utilizing web page optimization techniques, key word consultancy or content optimization to increase web site visibility to search engines and, therefore, user’s attention to the customer pages. SEM firms are related to small knowledge-intensive businesses. On the basis of data analysis the business model was constructed. The SEM model includes generalized constructs, although they represent a wider amount of operational aspects. Constructing blocks of the model includes fundamental parts of SEM commercial activity: value creation, customer, infrastructure and financial segments. Also, approaches were provided on company’s differentiation and competitive advantages evaluation. It is assumed that search marketers should apply further attempts to differentiate own business out of the large number of similar service providing companies. Findings indicate that SEM companies are interested in the increasing their trustworthiness and the reputation building. Future of the search marketing is directly depending on search engines development.

Influence of Link Structure on Search Engine Result Pages of Online Nursery Shops

The primary objective of this thesis is to assess how the backlink portfolio structure and off site Search Engine Optimisation (SEO) elements influence ranking of UK based online nursery shops. The growth of the internet use demanded significant effort from companies to optimize and increase their online presence in order to cope with the increasing online competition. The new e-Commerce technology - called Search Engine Optimisation - has been developed that helped increase website visibility of companies. The SEO process involves on site elements (i.e. changing the parameters of the company's website such as keywords, title tags and meta descriptions) and off site elements (link building and social media marketing activity). Link Building is based on several steps of marketing planning including keyword research and competitor analysis. The underlying goal of keyword research is to understand the targeted market through identifying relevant keyword queries that are used by targeted costumer group. In the analysis, three types (geographic, field and company’s strategy related) and seven sources of keywords has been identified and used as a base of analysis. Following the determination of the most popular keywords, allinanchor and allintitle search has been conducted and the first ten results of the searches have been collected to identify the companies with the most significant web presence among the nursery shops. Finally, Link Profiling has been performed where the essential goal was to understand to what extent other companies' link structure is different that the base company's backlinks. Significant difference has been found that distinguished the top three companies ranking in the allinanchor and allintitle search. The top three companies, „Mothercare”, „Mamas and Papas” and „Kiddicare” maintained significantly better metrics regarding domain and page authority on the main landing pages, the average number of outbound links for link portfolio metric and in number of backlinks. These companies also ranked among the highest in page authority distribution and followed external linking.

Heat transfer inside internal combustion engine: modelling and comparison with experimental data

The paper is devoted to study specific aspects of heat transfer in the combustion chamber of compression ignited reciprocating internal combustion engines and possibility to directly measure the heat flux by means of Gradient Heat Flux Sensors (GHFS). A one – dimensional single zone model proposed by Kyung Tae Yun et al. and implemented with the aid of Matlab, was used to obtain approximate picture of heat flux behavior in the combustion chamber with relation to the crank angle. The model’s numerical output was compared to the experimental results. The experiment was accomplished by A. Mityakov at four stroke diesel engine Indenor XL4D. Local heat fluxes on the surface of cylinder head were measured with fast – response, high – sensitive GHFS. The comparison of numerical data with experimental results has revealed a small deviation in obtained heat flux values throughout the cycle and different behavior of heat flux curve after Top Dead Center.

Heat flux measurement inside internal combustion engine with gradient heat flux sensor.

This master’s thesis is devoted to study different heat flux measurement techniques such as differential temperature sensors, semi-infinite surface temperature methods, calorimetric sensors and gradient heat flux sensors. The possibility to use Gradient Heat Flux Sensors (GHFS) to measure heat flux in the combustion chamber of compression ignited reciprocating internal combustion engines was considered in more detail. A. Mityakov conducted an experiment, where Gradient Heat Flux Sensor was placed in four stroke diesel engine Indenor XL4D to measure heat flux in the combustion chamber. The results which were obtained from the experiment were compared with model’s numerical output. This model (a one – dimensional single zone model) was implemented with help of MathCAD and the result of this implementation is graph of heat flux in combustion chamber in relation to the crank angle. The values of heat flux throughout the cycle obtained with aid of heat flux sensor and theoretically were sufficiently similar, but not identical. Such deviation is rather common for this type of experiment.

It’s a workflow engine. It’s working with linked data. It’s repository! – Supporting electronic thesis related processes in University of Helsinki library

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Elasticsearch as a new search engine for Invenio and more

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014