Patient hand hygiene compliance in the hemodialysis environment

Hand hygiene compliance of patients receiving hemodialysis treatment is a contemporary discussion topic among health care professionals in the Nephrology Clinic of Helsinki University City Hospital. The purpose of the Final Thesis is to review patient hand hygiene in terms of risks its lack entails and based on the evidence based findings to design an end product as a poster. The poster can be utilised in the Nephrology Clinic's nursing environment to educate and motivate patients to pay specifid attention to the importance of hand hygiene. The method used was a systematic literature review. The most important evidence based findings were extracted from the chosen thirteen scientific articles. All articles were searched from the Cumulative Index to Nursing and Allied Health Literature electronic database. The gathered information was then used to build the content of a patient education tool that for this project was defined as a Poster. The findings in this study showed that transmission of bloodborne infections, like Hepatitis B or C virus can occur through a vascular access and that the consequences of this can be very fatal. Additionally, environmental surfaces such as furniture, door knobs and dialysis machine control knobs were all possible infection sources for the patient receiving hemodialysis treatment. Adherence to good hand hygiene behaviour lowered the risk for infections. The end product of this study is a poster that is targeted to patients undergoing hemodialysis treatment. Using a health promotion agenda in the Poster, it is hoped that patients will pay more attention to the importance of hand hygiene and that they will be more motivated to use aseptic methods such as alcohol based hand rubs in the hemodialysis setting.

Multivariable regression analysis and hot-spot stress approach into fatigue life estimations of welded joints

Kolmen eri hitsausliitoksen väsymisikä arvio on analysoitu monimuuttuja regressio analyysin avulla. Regression perustana on laaja S-N tietokanta joka on kerätty kirjallisuudesta. Tarkastellut liitokset ovat tasalevy liitos, krusiformi liitos ja pitkittäisripa levyssä. Muuttujina ovat jännitysvaihtelu, kuormitetun levyn paksuus ja kuormitus tapa. Paksuus effekti on käsitelty uudelleen kaikkia kolmea liitosta ajatellen. Uudelleen käsittelyn avulla on varmistettu paksuus effektin olemassa olo ennen monimuuttuja regressioon siirtymistä. Lineaariset väsymisikä yhtalöt on ajettu kolmelle hitsausliitokselle ottaen huomioon kuormitetun levyn paksuus sekä kuormitus tapa. Väsymisikä yhtalöitä on verrattu ja keskusteltu testitulosten valossa, jotka on kerätty kirjallisuudesta. Neljä tutkimustaon tehty kerättyjen väsymistestien joukosta ja erilaisia väsymisikä arvio metodeja on käytetty väsymisiän arviointiin. Tuloksia on tarkasteltu ja niistä keskusteltu oikeiden testien valossa. Tutkimuksissa on katsottu 2mm ja 6mm symmetristäpitkittäisripaa levyssä, 12.7mm epäsymmetristä pitkittäisripaa, 38mm symmetristä pitkittäisripaa vääntökuormituksessa ja 25mm/38mm kuorman kantavaa krusiformi liitosta vääntökuormituksessa. Mallinnus on tehty niin lähelle testi liitosta kuin mahdollista. Väsymisikä arviointi metodit sisältävät hot-spot metodin jossa hot-spot jännitys on laskettu kahta lineaarista ja epälineaarista ekstrapolointiakäyttäen sekä paksuuden läpi integrointia käyttäen. Lovijännitys ja murtumismekaniikka metodeja on käytetty krusiformi liitosta laskiessa.

Maalämpöpumpun mitoitusjärjestelmän kehittäminen

Työn tavoitteena oli kehittää maalämpöpumppujärjestelmään kuuluvien komponenttien mitoitusta. Työ tehtiin Alufer Oy nimiselle yritykselle, joka on työskennellyt jo kolme vuotta maalämpöpumppujärjestelmän tuotekehityksen parissa. Maalämpöpumppujärjestelmä tullaan suunnittelemaan mahdollisimman suorituskykyiseksi ja joustavaksi. Suunnittelun lähtökohtana on, että lämmitysjärjestelmä on ns. matalalämpö-järjestelmä, joka käytännössä usein toteutetaan lattialämmityksenä. Ensimmäiseksi työssä on selvitetty mitä maalämpö on ja mitkä ovat yleisimmät maalämpöpumppujärjestelmän lämmönkeruuputkistojen asennustavat. Tällä hetkellä käytössä on joko vaakaan (maa, vesi) tai pystyyn asennettava lämmönkeruuputkisto (porakaivo). Seuraavaksi työssä on lähdetty selvittämään maalämpöpumppumarkkinoita Suomessa sekä selvitetty kolmen suurimman valmistajan Geopro Systemsin, Suomen Lämpöpumpputekniikan ja Ekowellin tuotteita sekä tekniikkaa. Työssä selvitetään myös muutamien Eurooppalaisten maiden markkinat. Mitoitusjärjestelmässä tarkastelu on aloitettu uudisrakennuksen lämmitystehon tarpeesta ja käyttöveden lämmityksen tarvitsemasta tehosta. Tarvittavan lämmitysenergian perusteella määriteltiin lämpöpumppujärjestelmään kuuluvat komponentit. Maalämpöpumppujärjestelmä koostuu seuraavista pääkomponenteista: höyrystin, kompressori, lauhdutin ja paisuntaventtiili. Höyrystimen tehon mitoituksessa on huomioitu lämmönkeruuputkistossa kulkevan nesteen aineominaisuudet, massavirta ja lämpötilaero höyrystimen nesteen ulostulon sekä sisään menon välillä. Kompressorin teho on määritetty valitun kylmäaineen (R407C) lg p-h piirroksesta tai määritetty teoreettisesti kompressorivalmistajien omista valintaohjelmista. Lauhduttimen teho on määritelty höyrystimen sekä kompressorin tehon summasta. Samalla määräytyy myös uudisrakennuksen lämmitystehontarve. Lopuksi työssä on käsitelty maalämpöpumppujärjestelmän kehitysmahdollisuuksia. Vaihtoehtoina on huomioitu tulistin, alijäähdytin ja varaaja, joilla voidaan huomattavasti parantaa maalämpöpumpun lämpökerrointa.

Vesikiertoisen ja kaapeleilla toteutetun lattialämmityksen teknistaloudellinen vertailu

Lopputyössä vertailtiin vesikiertoisen ja kaapeleilla toteutetun lattialämmityksen erilai-sia ominaisuuksia. Vertailuparametreinä olivat lattialämmitysten mitoitus, säätö, asen-nus, investointikustannukset, käyttökustannukset, vikaantuminen ja korjaus, asumis-viihtyvyys, käyttöön liittyvät tekijät, markkinat ja toimijat sekä lattian päällysteet. Näistä lat-tialämmityksien asumisviihtyvyys, säätö ja kustannukset otettiin tarkempaan vertailuun. Lämmitysjärjestelmien kokonaiskustannuksia vertailtiin 25 vuoden jaksolla ja 4 % ko-rolla. Investointikustannuksiin sisältyi lämmitysjärjestelmien lisäksi lkv-varaajan ja tek-nisen tilan kustannukset sekä liittymismaksut. Käyttökustannusten vertailussa otettiin huomioon lämmityskulujen lisäksi myös lämmityksen hyötysuhde, yö- ja päiväsähköosuudet ja -energian hinnat, taloussähkön kustannukset, perusmaksut sekä huoltokulut. Tutkimuksen mukaan halvin pientalojen lämmitysmuoto on osittain varaava huonekoh-tainen sähkölämmitys, jonka vuosittaisiksi kustannuksiksi tuli 11452 mk. Sähkölämmi-tyksen tekee vertailtavista halvimmaksi lämmitysjärjestelmäksi pientaloille (n. 150 m2) sen pienet pääomakustannukset, lämmityksen hyvä hyötysuhde sekä varsin kilpailuky-kyiset käyttökustannukset. Vertailun kallein oli öljyä energialähteenä käyttävä vesikiertoi-nen lattialämmitys, jonka vuosittaisiksi kustannuksiksi tuli 13080 mk. Öljy on energia-hinnaltaan halpa, mutta öljylämmityksen huono hyötysuhde sekä varsin korkeat pää-omakustannukset tekevät siitä vertailtavista kalleimman lämmitysmuodon. Energian hin-tojen herkkyysanalyysissä huomattiin sähkön säilyttävän kilpailukykynsä, vaikka öljyn ja maakaasun hinnat laskisivatkin huomattavasti. Asumismukavuuden ja säädön kohdalla vertailtiin lämpötilojen tasaisuutta huonetilois-sa. Mittauskohteiden huonelämpötiloja on seurattu eri projekteissa jatkuvatoimisesti jo-pa yli kahden vuoden ajan. Mittaustulosten mukaan vesikiertoisella lattialämmityksellä huonelämpötilat ovat tasaisemmat kuin osittain varaavalla huonekohtaisella sähköläm-mityksellä. Tämä johtuu sähkölämmityksen varaavuudesta. Hyvillä yhdistelmätermostaateilla päästään tosin myös huonekohtaisen sähkölämmityksen yhteydessä tasaisiin huonelämpötiloihin. Molempien lämmitysmuotojen säädön heikkoutena on hidas reagointi sisäisten lämmönlähteiden aiheuttamaan nopeaan sisälämpötilan nousuun.

Reducing Manufacturing Costs of the Screen Dryer’s Hot Section by Design

In this thesis, the purpose was to find the cost distribution of the screen dryer and the largest cost factors. The hot section of the screen dryer was revealed as the biggest cost factor, so composing new cost efficient solutions were directed to it. DFMA (Design for Manufacture and Assembly) was chosen to help the design process. DFMA is a product design strategy developed for taking manufacturing and assembly costs into account at the early stages of the design process. In the theory part of the thesis, other methods of economical design and tools needed for estimating manufacturing costs are introduced. In the empirical part, the hot section of the screen dryer was divided into sub-assemblies and their manufacturing costs were estimated. The design propositions were directed to the self-manufactured assemblies and parts. The new manufacturing costs were calculated for the developed propositions. Lastly, the most cost efficient solutions were summarized. The savings on the self-manufactured assemblies were about 40 %, which was about 13 % of the combined total costs of the hot section.

Natural and synthetic fibres improving tensile strength and elongation of paper products

The theory part of the Master’s thesis introduces fibres with high tensile strength and elongation used in the production of paper or board. Strong speciality papers are made of bleached softwood long fibre pulp. The aim of the thesis is to find new fibres suitable for paper making to increase either tensile strength, elongation or both properties. The study introduces how fibres bond and what kind of fibres give the strongest bonds into fibre matrix. The fibres that are used the in manufacturing of non-wovens are long and elastic. They are longer than softwood cellulose fibres. The end applications of non-wovens and speciality papers are often the same, for instance, wet napkins or filter media. The study finds out which fibres are used in non-wovens and whether the same fibres could be added to cellulose pulp as armature fibres, what it would require for these fibres to be blended in cellulose, how they would bind with cellulose and whether some binding agents or thermal bonding, such as hot calendaring would be necessary. The following fibres are presented: viscose, polyester, nylon, polyethylene, polypropylene and bicomponent fibres. In the empiric part of the study the most suitable new fibres are selected for making hand sheets in laboratory. Test fibres are blended with long fibre cellulose. The test fibres are viscose (Tencel), polypropylene and polyethylene. Based on the technical values measured in the sheets, the study proposes how to continue trials on paper machine with viscose, polyester, bicomponent and polypropylene fibres.

Effect of pulps fractionation on formation and strength properties of laboratory hand sheets

The objectives of the work were to study the effect of dewatering time varying on formation properties of papersheets, to determine the role of fines fraction in creation of paper with good formation and strength properties of papersheets, and also to study the effect of charge modification of fibers fractionations on formation properties of handsheets. The paper formation is one of the most important structural properties of paper. This property has effect on physical and optical characteristics of paper. In thi work the effect of formation on tensile strength was determined. The formation properties were analyzed by using the AMBERTEC Beta Formation Tester. The PAM addition as a f;locculant agent did some changes in the formation of paper. Paper sheets were also made from different furnishes of both birch and pine pulps. The fibers particles as a fines have great effect on drainability changes. Fines fraction played important role in papermaking. The two kinds of pulps (pine and birch pulps) were also used in this work for investigation of fines role. As it was expected the fines fraction gave positive effect on paper formation, but when fines fraction was added above initial fines content the formation of paper was deteriorated. The effect of paper formation on tensile strength was also determined. In many cases the poor formation of paper had negative effect on strength properties of paper..

Extraction of polymeric galactoglucomannans from spruce wood by pressurized hot water

The major type of non-cellulosic polysaccharides (hemicelluloses) in softwoods, the partly acetylated galactoglucomannans (GGMs), which comprise about 15% of spruce wood, have attracted growing interest because of their potential to become high-value products with applications in many areas. The main objective of this work was to explore the possibilities to extract galactoglucomannans in native, polymeric form in high yield from spruce wood with pressurised hot-water, and to obtain a deeper understanding of the process chemistry involved. Spruce (Picea abies) chips and ground wood particles were extracted using an accelerated solvent extractor (ASE) in the temperature range 160 – 180°C. Detailed chemical analyses were done on both the water extracts and the wood residues. As much as 80 – 90% of the GGMs in spruce wood, i.e. about 13% based on the original wood, could be extracted from ground spruce wood with pure water at 170 – 180°C with an extraction time of 60 min. GGMs comprised about 75% of the extracted carbohydrates and about 60% of the total dissolved solids. Other substances in the water extracts were xylans, arabinogalactans, pectins, lignin and acetic acid. The yields from chips were only about 60% of that from ground wood. Both the GGMs and other non-cellulosic polysaccharides were extensively hydrolysed at severe extraction conditions when pH dropped to the level of 3.5. Addition of sodium bicarbonate increased the yields of polymeric GGMs at low additions, 2.5 – 5 mM, where the end pH remained around 3.9. However, at higher addition levels the yields decreased, mainly because the acetyl groups in GGMs were split off, leading to a low solubility of GGMs. Extraction with buffered water in the pH range 3.8 – 4.4 gave similar yields as with plain water, but gave a higher yield of polymeric GGMs. Moreover, at these pH levels the hydrolysis of acetyl groups in GGMs was significantly inhibited. It was concluded that hot-water extraction of polymeric GGMs in good yields (up to 8% of wood) demands appropriate control of pH, in a narrow range about 4. These results were supported by a study of hydrolysis of GGM at constant pH in the range of 3.8 – 4.2 where a kinetic model for degradation of GGM was developed. The influence of wood particle size on hot-water extraction was studied with particles in the range of 0.1 – 2 mm. The smallest particles (< 0.1 mm) gave 20 – 40% higher total yield than the coarsest particles (1.25 – 2 mm). The difference was greatest at short extraction times. The results indicated that extraction of GGMs and other polysaccharides is limited mainly by the mass transfer in the fibre wall, and for coarse wood particles also in the wood matrix. Spruce sapwood, heartwood and thermomechnical pulp were also compared, but only small differences in yields and composition of extracts were found. Two methods for isolation and purification of polymeric GGMs, i.e. membrane filtration and precipitation in ethanol-water, were compared. Filtration through a series of membranes with different pore sizes separated GGMs of different molar masses, from polymers to oligomers. Polysaccharides with molar mass higher than 4 kDa were precipitated in ethanol-water. GGMs comprised about 80% of the precipitated polysaccharides. Other polysaccharides were mainly arabinoglucuronoxylans and pectins. The ethanol-precipitated GGMs were by 13C NMR spectroscopy verified to be very similar to GGMs extracted from spruce wood in low yield at a much lower temperature, 90°C. The obtained large body of experimental data could be utilised for further kinetic and economic calculations to optimise technical hot-water extractionof softwoods.

Hand tracking in high-speed camera videos

Visual object tracking has been one of the most popular research topics in the field of computer vision recently. Specifically, hand tracking has attracted significant attention since it would enable many useful practical applications. However, hand tracking is still a very challenging problem which cannot be considered solved. The fact that almost every aspect of hand appearance can change is the fundamental reason for this difficulty. This thesis focused on 2D-based hand tracking in high-speed camera videos. During the project, a toolbox for this purpose was collected which contains nine different tracking methods. In the experiments, these methods were tested and compared against each other with both high-speed videos recorded during the project and publicly available normal speed videos. The results revealed that tracking accuracies varied considerably depending on the video and the method. Therefore, no single method was clearly the best in all videos, but three methods, CT, HT, and TLD, performed better than the others overall. Moreover, the results provide insights about the suitability of each method to different types and situations of hand tracking.

Post-processing and analysis of tracked hand trajectories

In this thesis, the suitability of different trackers for finger tracking in high-speed videos was studied. Tracked finger trajectories from the videos were post-processed and analysed using various filtering and smoothing methods. Position derivatives of the trajectories, speed and acceleration were extracted for the purposes of hand motion analysis. Overall, two methods, Kernelized Correlation Filters and Spatio-Temporal Context Learning tracking, performed better than the others in the tests. Both achieved high accuracy for the selected high-speed videos and also allowed real-time processing, being able to process over 500 frames per second. In addition, the results showed that different filtering methods can be applied to produce more appropriate velocity and acceleration curves calculated from the tracking data. Local Regression filtering and Unscented Kalman Smoother gave the best results in the tests. Furthermore, the results show that tracking and filtering methods are suitable for high-speed hand-tracking and trajectory-data post-processing.