Uptake of heavy metals by plants from airborne deposition and polluted soils

Selostus: Kasvien raskasmetallien otto ilmasta ja saastuneesta maasta

Arsenic and heavy metal concentrations in agricultural soils in South Savo province

Selostus: Etelä-Savon viljelysmaan arseeni- ja raskasmetallipitoisuudet

Heavy-metal pollution and remediation of forest soil around the Harjavalta Cu-Ni smelter, in SW Finland

Abstract

System Investigation for Hybrid Electric Vehicle

A hybrid electric vehicle is a fast-growing concept in the field of vehicle industry. Nowadays two global problems make manufactures to develop such systems. These problems are: the growing cost of a fuel and environmental pollution. Also development of controlled electric drive with high control accuracy and reliability allows improving of vehicle drive characteristics. The objective of this Diploma Thesis is to investigate the possibilities of electrical drive application for new principle of parallel hybrid vehicle system. Electric motor calculations, selection of most suitable control system and other calculations are needed. This work is not final work for such topic. Further investigation with more precise calculations, modeling, measurements and cost calculations are needed to answer the question if such system is efficient.

Matala-aktiivisen metallijätteen aktiivisuusmittaukset Loviisan voimalaitoksella

Tämän diplomityön lähtökohtana oli metallijätteen mittausmenetelmien kehittäminen Loviisan voimalaitoksella. Työn taustalla oli myös Säteilyturvakeskuksen antaman ohjeen YVL 8.2 ’Ydinjätteiden ja käytöstä poistettujen ydinlaitosten vapauttaminen valvonnasta’ uusinta. Työssä arvioitiin miten YVL 8.2 -ohjeen päivitys vaikuttaa Loviisan voimalaitoksen metallijätteen käsittelyyn vapautusmenettelyn osalta. Diplomityössä arvioitiin eri aktiivisuusmittausmenetelmien havaitsemia aktiivisuuksia metallijätteessä. Metallijätteen mittausmenetelmien arviointi aloitettiin kirjalliseen materiaaliin tutustumisella, jonka jälkeen mittausmenetelmiä verrattiin kokeellisesti. Verrattavia mittauksia olivat suora kontaminaatiomittaus, gammaspektrometrinen mittaus, kuiva-, märkä-, ja happopyyhintänäytteet sekä mittaus Condor E -monitorilla. Diplomityö sisältää myös arvioinnin ajoneuvojen säteilymittauslaitteiston käytöstä metallijätteen valvonnasta vapauttamisessa. Työssä arvioitiin myös mittausmenetelmän vaikutusta logistiikkaketjuun Loviisan voimalaitoksella ja kaiken metallijätteen loppusijoittamisen vaikutuksia. Nykyinen metallijätteen vapautusmenettely on raskas, eikä täysin uusitun ohjeen YVL 8.2 vaatimusten mukainen. Diplomityön tuloksena metallijätteen käsittelymenetelmäksi suositellaan metallijätteen vapauttamista valvonnasta seuraavin menettelyin. Pieni metallijäte tulisi huolellisen esimittauksen jälkeen pakata ja analysoida gammaspektrometrisesti. Suuret metallijätekappaleet tulisi analysoida pyyhintänäytteiden perusteella. Pyyhintänäytteiden analysointi kannattaisi suorittaa gammaspektrometrillä, koska sillä saavutetaan tarkin tulos ja se on täysin ohjeen YVL 8.2 vaatimusten mukainen. Loppusijoitusluolaan tulisi sijoittaa mahdollisimman pieni määrä vapauttamiskelpoista metallijätettä. Myös ajoneuvojen säteilymittauslaitteiston käyttöä varmentavana mittauksena tulisi tehostaa.

Electrical machine in a Hybrid Electrical Vehicle

Hybrid electric vehicles (HEV) have attracted very much attention during the latest years. Increasing environmental concern and an increase in fuel prices are key factors for the growing interest towards the HEV. In a hybrid electric vehicle the power train consists of both a mechanical power system and an electric power transmission system. The major subsystems in the mechanical power system are the internal combustion engine which powers the vehicle; electric power transmission including an energy storage, power electronic inverter, hybrid control system; the electric motor drive that runs either in the generating mode or in the motoring mode to process the power flow between the energy storage and the electrical machine. This research includes two advanced electric motors for a parallel hybrid: induction machine and permanent magnets synchronous machine. In the thesis an induction motor and a permanent magnet motor are compared as propulsion motors. Electric energy storages are also studied.

Permanent Magnet Synchronous Machine for Parallel Hybrid Vehicle

The aim of this thesis is to describe hybrid drive design problems, the advantages and difficulties related to the drive. A review of possible hybrid constructions, benefits of parallel, series and series-parallel hybrids is done. In the thesis analytical and finite element calculations of permanent magnet synchronous machines with embedded magnets were done. The finite element calculations were done using Cedrat’s Flux 2D software. This machine is planned to be used as a motor-generator in a low power parallel hybrid vehicle. The boundary conditions for the design were found from Lucas-TVS Ltd., India. Design Requirements, briefly: • The system DC voltage level is 120 V, which implies Uphase = 49 V (RMS) in a three phase system. • The power output of 10 kW at base speed 1500 rpm (Torque of 65 Nm) is desired. • The maximum outer diameter should not be more than 250 mm, and the maximum core length should not exceed 40 mm. The main difficulties which the author met were the dimensional restrictions. After having designed and analyzed several possible constructions they were compared and the final design selected. Dimensioned and detailed design is performed. Effects of different parameters, such as the number of poles, number of turns and magnetic geometry are discussed. The best modification offers considerable reduction of volume.

Energy harvesting methods for wireless sensor nodes in heavy-duty vehicles

The number of autonomous wireless sensor and control nodes has been increasing rapidly during the last decade. Until recently, these wireless nodes have been powered with batteries, which have lead to a short life cycle and high maintenance need. Due to these battery-related problems, new energy sources have been studied to power wireless nodes. One solution is energy harvesting, i.e. extracting energy from the ambient environment. Energy harvesting can provide a long-lasting power source for sensor nodes, with no need for maintenance. In this thesis, various energy harvesting technologies are studied whilst focusing on the theory of each technology and the state-of-the-art solutions of published studies and commercial solutions. In addition to energy harvesting, energy storage and energy management solutions are also studied as a subsystem of a whole energy source solution. Wireless nodes are also used in heavy-duty vehicles. Therefore a reliable, long-lasting and maintenance-free power source is also needed in this kind of environment. A forestry harvester has been used as a case study to study the feasibility of energy harvesting in a forestry harvester’s sliding boom. The energy harvester should be able to produce few milliwatts to power the target system, an independent limit switch.

A vehicle for message

Soitinnus: piano, rummut, ääninauha?