Occlusal and dentofacial characteristics of the deciduous dentition and treatment effects of the eruption guidance appliance in the early mixed dentition

The aim of this investigation was to analyze the dental occlusion in the deciduous dentition, and the effects of orthodontic treatment carried out in the early mixed dentition with the eruption guidance appliance. The deciduous occlusion and craniofacial morphology of 486 children (244 girls and 242 boys) were investigated at the onset of the mixed dentition period (mean age 5.1 years, range 4.0-7.8 years). Treatment in the treatment group and follow-up in the control group were started when the first deciduous incisor was exfoliated (T1) and ended when all permanent incisors and first molars were fully erupted (T2). The mean age of the children was 5.1 years (SD 0.5) at T1 and 8.4 years (SD 0.5) at T2. Treatment was carried out with the eruption guidance appliance. Occlusal changes that took place in 167 children were compared with those of 104 untreated control children. Pre- and post-treatment cephalometric radiographs were taken, and the craniofacial morphology of 115 consecutively treated children was compared with that of 104 control children. The prevalence of malocclusion in the deciduous dentition was 68% or 93% depending on how the cut-off value between the acceptable and non-acceptable occlusal characteristic was defined. The early dentofacial features of children with distal occlusion, large overjet and deepbite differed from those with normal occlusion. However, the skeletal pattern of these three malocclusions showed considerable similarity each being characterized by a retrusive mandible, small maxillo-mandibular difference, convex profile, retrusive lower incisors, and large interincisal angle. In the treatment group, overjet and overbite decreased significantly from T1 to T2. Following treatment, a tooth-to-tooth contact was found in 99% of the treated children but only in 24% of the controls. A Class I molar relationship was observed in 90% of the children in the treatment group, and in 48% in the control group. Good alignment of the incisors was observed in 98% of the treated children, whereas upper crowding was found in 32% and lower crowding in 47% of the controls. A significant difference between the groups was found in the mandibular length, midfacial length and maxillo-mandibular differential. The occlusal correction, brought about by the eruption guidance appliance, was achieved mainly through changes in the dentoalveolar region of the mandible. In addition, the appliance seemed to enhance the growth of the mandible. Treatment in the early mixed dentition using the eruption guidance appliance is an effective method to normalize occlusion and reduce further need of orthodontic treatment. Only few spontaneous corrective changes can be expected without active intervention.

Metabolic syndrome in young adults – prevalence, childhood predictors and association with subclinical atherosclerosis

Background: Metabolic syndrome (MetS) is a cluster of cardiovascular risk factors including central obesity, insulin resistance, impaired glucose tolerance, hypertension and dyslipidemia. The prevalence of MetS is increasing worldwide in all age groups. MetS is associated with increased risk of cardiovascular disease and type 2 diabetes mellitus. Aims: The aim of the present study was to investigate the prevalence, secular trends and childhood predictors of MetS in young adults. Furthermore, the relations between MetS and subclinical atherosclerosis were studied and whether apolipoproteins (apo) B and A-I, C-reactive protein (CRP) and type II secretory phospholipase A2 (sPLA2) were associated with MetS, and to what extent the atherogenicity of MetS was explained by these factors. Participants and Methods: The present thesis is part of the large scale population-based, prospective study, the Cardiovascular Risk in Young Finns Study. The first cross-sectional study was conducted in 1980 and included 3,596 participants aged 3-18 years. Carotid and brachial ultrasound studies were performed for 2,283 of these participants in 2001 and 2,200 of these participants in 2007. Results: The overall prevalence of MetS in young adults aged 24-39 years in 2001 was 10-15 % and 6 years later in 30-45 year-old adults it was 15-23 % depending on the MetS definition used. Between the years 1986 and 2001, MetS prevalence increased from 1.0 % to 7.5 % (p<0.0001) in 24-year-old participants that was mostly driven by the increased central obesity. Participants with MetS had increased carotid intima-media thickness (cIMT) and decreased carotid elasticity compared to those without the syndrome. Impaired brachial flow-mediated dilatation (FMD) was not related to MetS but it modified the relationship between MetS and cIMT (P for interaction 0.023). High levels of apoB, CRP, sPLA2 and low levels of apoA-I associated with MetS in young adults. In prospective analysis both MetS and high apoB predicted (P<0.0001) incident high cIMT, defined as cIMT>90th percentile and/or plaque. The association between MetS and incident high cIMT was attenuated by ~40 % after adjustment with apoB. Conclusions: MetS is common in young adults and increases with age. Screening for risk factors, especially obesity, at an early life stage could help identify children and adolescents at increased risk of developing MetS and cardiovascular disease later in life. MetS identifies a population of young adults with evidence of increased subclinical atherosclerosis. Impaired brachial endothelial response is not a hallmark of MetS in young adults, but the status of endothelial function modifies the association between metabolic risk factors and atherosclerosis. In addition, the atherogenicity of MetS in this population assessed by incident high cIMT appears to be substantially mediated by elevated apoB.

From statin efficacy to everyday effectiveness: Studying the gap in between.

Statins are indicated for preventing cardiovascular disease events. Patients with diabetes have a risk of major cardiovascular events double the risk of their peers without diabetes. Thus, clinical treatment guidelines recommend statins for the management of diabetic dyslipidemia. The evidence base for statin use in cardiovascular disease derives from the randomized controlled statin trials designed to prove statin efficacy under ideal conditions, among a homogenous study population meeting strict trial eligibility criteria. This thesis was implemented as four pharmacoepidemiological statin studies using register data on realworld statin users. The overall purpose was to evaluate the trends, patterns and effectiveness of statin use in everyday life. More specifically, nationwide secular trends in statin use in Finland were analysed, especially among patient groups which had been underrepresented in the statin trials. Furthermore, the benchmarking statin trials in diabetes, the Heart Protection Study and the Collaborative Atorvastatin Diabetes Study, were evaluated for their representativeness for real-world diabetes care with the emphasis placed on adherence to statin use. The association between good adherence and the incidence of major cardiovascular events in the real-world was further investigated in diabetes. These studies demonstrate that statin initiations increased from 1995 to 2005 in Finland. The increase was most pronounced among those aged at least 75 years and was observed already before the publication of rigorous trial data conducted in elderly subjects. Thus, statins seem to have been initiated in clinical practice also going beyond the strict trial eligibility criteria. Nonetheless, low adherence to statin use among the real-world patients with diabetes was found not only to limit the representativeness of the trials for clinical care but also to attenuate in all likelihood their benefits in the real-world. In fact, good adherence to statin use was found to associate with a decreased risk for major cardiovascular events in patients with diabetes. In conclusion, these studies highlight the importance of good adherence to statin use in clinical practice in order to obtain the full therapeutic value demonstrated in the statin trials. Simply increasing the number of statin users will not alone suffice in sharing our common resources appropriately.

A modified structural stress method for fatigue assessment of welded structures

Fatigue life assessment of weldedstructures is commonly based on the nominal stress method, but more flexible and accurate methods have been introduced. In general, the assessment accuracy is improved as more localized information about the weld is incorporated. The structural hot spot stress method includes the influence of macro geometric effects and structural discontinuities on the design stress but excludes the local features of the weld. In this thesis, the limitations of the structural hot spot stress method are discussed and a modified structural stress method with improved accuracy is developed and verified for selected welded details. The fatigue life of structures in the as-welded state consists mainly of crack growth from pre-existing cracks or defects. Crack growth rate depends on crack geometry and the stress state on the crack face plane. This means that the stress level and shape of the stress distribution in the assumed crack path governs thetotal fatigue life. In many structural details the stress distribution is similar and adequate fatigue life estimates can be obtained just by adjusting the stress level based on a single stress value, i.e., the structural hot spot stress. There are, however, cases for which the structural stress approach is less appropriate because the stress distribution differs significantly from the more common cases. Plate edge attachments and plates on elastic foundations are some examples of structures with this type of stress distribution. The importance of fillet weld size and weld load variation on the stress distribution is another central topic in this thesis. Structural hot spot stress determination is generally based on a procedure that involves extrapolation of plate surface stresses. Other possibilities for determining the structural hot spot stress is to extrapolate stresses through the thickness at the weld toe or to use Dong's method which includes through-thickness extrapolation at some distance from the weld toe. Both of these latter methods are less sensitive to the FE mesh used. Structural stress based on surface extrapolation is sensitive to the extrapolation points selected and to the FE mesh used near these points. Rules for proper meshing, however, are well defined and not difficult to apply. To improve the accuracy of the traditional structural hot spot stress, a multi-linear stress distribution is introduced. The magnitude of the weld toe stress after linearization is dependent on the weld size, weld load and plate thickness. Simple equations have been derived by comparing assessment results based on the local linear stress distribution and LEFM based calculations. The proposed method is called the modified structural stress method (MSHS) since the structural hot spot stress (SHS) value is corrected using information on weld size andweld load. The correction procedure is verified using fatigue test results found in the literature. Also, a test case was conducted comparing the proposed method with other local fatigue assessment methods.

Russian metals for arctic offshore structures

With an increasingly growing demand for natural resources, the Arctic region has become an attractive area, holding about 15% of world oil. Ice shrinkage caused by global warming encourages the development of offshore and ship-building sectors. Russia, as one of the leading oil and gas production countries is participating actively in cold resistant materials research, since half of its territory belongs to the Arctic environment, which held considerable stores of oil. Nowadays most Russian offshore platforms are located in the Sakhalin Island area, which geographically does not belong to the Arctic, but has com-parable environmental conditions. Russia recently has manufactured several offshore platforms. It became clear that further development of the Arctic off-shore structures with necessary reliability is highly depending on the materials employed. This work pursues the following objectives:  to provide a comprehensive review on Russian metals used for Arctic offshore structures on the base of standards, books, journal articles and companies reports  to overview various Arctic offshore structures and its structural characteristics  briefly discuss materials testing methods for low temperatures Master`s thesis focuses on specifications and description of Russian metals which are already in use and can be used for Arctic offshore structures. Work overviews several groups of steel, such as low carbon, low alloy, chromium containing steels, stainless steels, aluminium and nanostructured steels. Materials under discussion are grouped based on the standards, for instance the work covers shipbuilding and structural steels at the different sections. This paper provides an overview of important Russian Arctic offshore projects built for use in Russia and ordered by foreign countries. Future trends in development of the Arctic materials are discussed. Based on the information provided in this Master`s thesis it is possible to learn about Russian metals used for ships and offshore platforms operated in the Arctic region. Paper can be used as the comprehensive review of current materials, such as various steels, aluminium and nanomaterials.

Kaupungin ja maaseudun vuorovaikutus alueellisessa kehittämispolitiikassa

In Finland, European Union membership and economic globalisation have changed the position of regions from closed territorial systems to nodes of open international networks. The increasing complexity of cities as globalised knowledge centres and functionally specialised and diversified rural areas, and on the other hand growing disparities between prosperous urban cores and lagging peripheral areas are also essential features in contemporary regional development. These trends have produced new needs to promote mutual dialogue between cities and the countryside in western market economies. Urban-rural interaction is an idea which was developed in the late 1990s within regional policy to pull together these new challenges to regional development and handle cities and the countryside as a whole. The aim of my study is to conceptualise the idea of urban-rural interaction, explain the phenomenon theoretically, clarify past and present urban and rural development and analyse regional policies from the interaction angle. The ultimate purpose is to illustrate the existence and nature of particular interaction policy in a globalising society. The general method is discourse analysis, which I use in three cases: Central Finland, South-Ostrobothnia and South-West Finland. Theoretically I have a two-dimensional approach. On the first hand I use World-System theory to explain how the global economy is moulding urban and rural structures at the regional level. On the other hand I use regime theory to explain local political actions and practises between cities and the countryside under the overlapping pressures deriving from reformulated regional structures and policies.

Adaptation to globalisation in Finland has been carried out by strengthening urban centres. The stress in regional policy has been in urban development. The development of the countryside has mostly been implemented by a separate rural policy. At the end of the 1990s and early 2000s Finnish cities have actually shown themselves to be competitive in global markets. The drawbacks of the new growth centre policy have been the sparse network of prosperous cities and their weak spreading effects, which have hindered comprehensive regional development. Tensions between urban and rural areas have also deepened. In this situation the interaction policy is used as a way of balancing development and moderate conflicts within the regions. From this point of view urban-rural interaction can be seen as a way of tackling the challenges of globalisation.

On the other hand the results emphasise that actors involved in regional development still believe, although the hegemonic discourse is on urban policy, that there are opportunities to stimulate progress in the countryside as well. In the situation where regional authorities control development resources, rural development can be successful only if rural actors manage to establish fruitful relationships with their urban partners. This is also the weakness of the programme-based regional policy. If rural municipalities or other actors are for any reason incapable of building development regimes with cities, the offers of interaction policy will be useless.

The problem of the interaction policy is that the focus and methods of it have so far been rather underdeveloped. In order to improve the efficiency of the interaction policy, further research should concentrate on the social processes which define the position of cities and the countryside as partners of interaction, and practises which promote or prohibit the possibilities of developing the interaction policy. The efforts to define different contents of urban-rural interaction or promote interaction projects should not have such an important role in the future as they have had so far. Instead, the focus of interaction policy should be on questions such as how to manage the political tensions between town and country and how to create a positive atmosphere for regional policy where the needs of urban and rural development are promoted equally.