SC HIOMON JA PAPERIKONEEN LÄMPÖTASAPAINON HALLINTA

Kivihiokkeen valmistus on energiaintensiivistä. Käytetystä energiasta muuttuu yli 90 prosenttia lämmöksi. Hiomolla käytetystä lämmöksi muuttuneesta tehosta voidaan paperikoneelle siirtää noin puolet. Mekaanisen massan valmistuksen ja paperikoneen vesikierrot erotetaan toisistaan häiriöaineiden kulkeutumisen estämiseksi. Vesikiertojen erottamisella katkaistaan myös lämmön siirtyminen hiomolta paperikoneelle massojen mukana. Käyttämällä lämmönsiirtimiä hiomon vesien jäähdytyksessä, voidaan hiomon hiomakoneiden suihkuvesivesilämpötilaa alentaa. Lämmönsiirto vaikuttaa paperikoneella annostelumassojen laimennusten kautta perälaatikkolämpötilaa kohottavasti. Työn tehtäväksi määritettiin kesäkuukausina esiintyvä hiomakoneiden suihkuveden raakavesijäähdytyksen tarpeen poistaminen ensisijaisesti niin, että ylimäärälämpö hyödynnetään tehtaalla. Työn muiksi tavoitteiksi muodostui annostelumassojen lämpötilan hallinta, etenkin muutokset, joilla voidaan nostaa hylkymassan annostelulämpötilaa. Työn kokeellinen osa tehtiin UPM Kymmene Oyj Kajaanin tehtailla syksyn 2004 aikana. Työssä tutkittiin WinGEMS simulointiohjelmalla tehtyjen mallien avulla lämmön siirtymistä hiomon ja paperikone 2:n välillä, sekä lämmönsiirtoa pois tasealueelta. Simulointimalli nykytilanteesta rakennettiin yksityiskohtaisesti nykyisen tuotantoprosessin kaltaiseksi ja siitä muokattiin eri vaihtoehtoja, joilla ratkaistiin tutkimukselle asetetut tehtävät. Kytkentämuutoksilla pystyttiin siirtämään hiomolta yli 85 % hiomakoneiden suihkuveden ylimäärälämmöstä ilman uusia laitehankintoja. Asentamalla lopuksi lämmönsiirrin hiomon puhdassuodoslinjaan, hiomakoneiden suihkuveden jäähdytystarve poistettiin kokonaan. Samalla alennettiin valkaisuun menevän massan lämpötilaa, jolloin peroksidivalkaisun kemikaalikulutus väheni yli 10 %. Lämmönsiirrinverkostosta tehtiin kesätilanteen pinch-analyysi, jolla selvitettiin prosessin lämmitys ja jäähdytystarpeet. Analyysin perusteella selvisi, että kytkennöissä ei rikota pinch sääntöjä ja, että prosessissa esiintyy kynnysongelma, jossa prosessi tarvitsee ainoastaan jäähdytystä.

Childhood community-acquired pneumonia

Background: Community-acquired pneumonia is a leading cause of morbidity and mortality in children worldwide. New, rapid methods are needed to improve the microbiologic diagnosis of pneumonia in clinical practice. The increasing incidence of parapneumonic empyema in children accentuates the importance of the identification of the causative agent and clinical predictors of empyema. Aims and methods: Two prospective studies were conducted to find feasible diagnostic methods for the detection of causative agents of pneumonia. The usefulness of pneumolysin-targeted real-time PCR in the diagnosis of pneumococcal disease was studied in children with pneumonia and empyema, and the clinical utility of induced sputum analysis in the microbiologic diagnosis of pneumonia was investigated in children with pneumonia. In addition, two retrospective clinical studies were performed to describe the frequency and clinical profile of influenza pneumonia in children and the frequency, clinical profile and clinical predictors of empyema in children. Results: Pneumolysin-PCR in pleural fluid significantly improved the microbiologic diagnosis of empyema by increasing the detection rate of pneumococcus almost tenfold to that of pleural fluid culture (75 % vs. 8 %). In whole blood samples, PCR detected pneumococcus in only one child with pneumonia and one child with pneumococcal empyema. Sputum induction provided good-quality sputum specimens with high microbiologic yield. Streptococcus pneumoniae (46 %) and rhinovirus (29 %) were the most common microbes detected. The quantification results of the paired sputum and nasopharyngeal aspirate specimens provided support that the majority of the bacteria (79 %) and viruses (55 %) found in sputum originated from the lower airways. Pneumonia was detected in 14 % of children with influenza infection. A history of prolonged duration of fever, tachypnea, and pain on abdominal palpation were found to be independently significant predictors of empyema. Conclusions: Pneumolysin-targeted real-time PCR is a useful and rapid method for the diagnosis of pneumococcal empyema in children. Induced sputum analysis with paired nasopharyngeal aspirate analysis can be of clinical value in the microbiologic diagnosis of pneumonia. Influenza pneumonia is an infrequent and generally benign disease in children with rare fatalities. Repeat chest radiograph and ultrasound imaging are recommended in children with pneumonia presenting with clinical predictors of empyema and in children with persistent fever and high CRP levels during hospitalization.

Kemikaalisekoituksen vaikutus kartongin liimausasteen pienimittakaavaiseen vaihteluun

Tässä diplomityössä tutkittiin massaliimauksen stabiilisuutta kartonkikoneella ja himan sekoituskonseptin muuttamisen vaikutusta liimausasteeseen ja liimausasteen pienimittakaavaiseen vaihteluun konerullan sisällä. Koeajoista saadut tulokset olivat erittäin lupaavia. Koeajoissa annosteltiin hartsia kahdella eri TrumpJet™-installaatiolla. Ensimmäisessä koeajossa hartsi sekoitettiin kaikkiin kolmeen kerrokseen sakean massan syöttölinjaan, ennen pyörrepuhdistuksen vaatimaa laimennusta. Toisessa koeajossa hartsi annosteltiin kolmella TrumpJet-suuttimella kartongin pintakerrokseen konesihdin jälkeen ja muihin kerroksiin perinteisesti sekoitussäiliön. Tuloksista nähtiin, että hartsin syöttö perälaatikon lähestymisvirtaukseen on mahdollista kartongin laadun ja liimausasteen siitä karsimatta. Liimausaste määritettiin Stora Enson spesifisen REP-menetelmän (raw edge penetration) avulla. Koesarjojen välille ei syntynyt merkittäviä eroja reunaimeytymätasoihin, eikä koesarjojen sisäisiin vaihteluihin verrattaessa referensikonerulliin.

Fractures in older people - incidence, predictors and consequences

In older populations, fractures are common and the consequences of fractures may be serious both for an individual and for society. However, information is scarce about the incidence, predictors and consequences of fractures in population-based unselected cohorts including both men and women and a long follow-up. The objective of this study was to analyse the incidence and predictors of fractures as well as functional decline and excess mortality due to fractures, among 482 men and 695 women aged 65 or older in the municipality of Lieto, Finland from 1991 until 2002. In analyses, Poisson’s, Cox proportional Hazards and Cumulative Logistic regression models were used for the control of several confounding variables. During the 12-year follow-up with a total of 10 040 person-years (PY), 307 (26%) persons sustained altogether 425 fractures of which 77% were sustained by women. The total incidence of fractures was 53.4 per 1000 PY (95% confidence intervals [95% CI]: 47.9 - 59.5) in women and 24.9 per 1000 PY (95% CI: 20.4 - 30.4) in men. The incidence rates of fractures at any sites and hip fractures were associated with increasing age. No significant changes in the ageadjusted incidence rates of fractures were found in either gender during the 12-year follow-up. The predictors of fractures varied by gender. In multivariate analyses, reduced handgrip strength and body mass index (BMI) lower than 30 in women and a large number of depressive symptoms in men were independent predictors of fractures. A compression fracture in one or more thoracic or upper lumbar vertebras on chest radiography at baseline was associated with subsequent fractures in both genders. Lower body fractures independently predicted both short- (0-2 years) and long-term (up to 8 years) functional decline in mobility and activities of daily living (ADL) performance during the 8-year follow-up. Upper body fractures predicted decline in ADL performance during longterm follow-up. In the 12-year follow-up, hip fractures in men (Hazard Ratio [HR] 8.1, 95% CI: 4.4-14.9) and in women (HR 3.0, 95% CI: 1.9-4.9), and fractures at the proximal humerus in men (HR 5.4, 95% CI: 1.6-17.7) were independently associated with excess mortality. In addition, leisure time inactivity in physical exercise predicted independently both functional decline and excess mortality. Fractures are common among older people posing serious individual consequences. Further studies about the effectiveness of preventing falls and fractures as well as improving care and rehabilitation after fractures are needed.

Design and characterization of large area position sensitive radiation detectors

Planar, large area, position sensitive silicon detectors are widely utilized in high energy physics research and in medical, computed tomography (CT). This thesis describes author's research work relating to development of such detector components. The key motivation and objective for the research work has been the development of novel, position sensitive detectors improving the performance of the instruments they are intended for. Silicon strip detectors are the key components of barrel-shaped tracking instruments which are typically the innermost structures of high energy physics experimental stations. Particle colliders such as the former LEP collider or present LHC produce particle collisions and the silicon strip detector based trackers locate the trajectories of particles emanating from such collisions. Medical CT has become a regular part of everyday medical care in all developed countries. CT scanning enables x-ray imaging of all parts of the human body with an outstanding structural resolution and contrast. Brain, chest and abdomen slice images with a resolution of 0.5 mm are possible and latest CT machines are able to image whole human heart between heart beats. The two application areas are presented shortly and the radiation detection properties of planar silicon detectors are discussed. Fabrication methods and preamplifier electronics of the planar detectors are presented. Designs of the developed, large area silicon detectors are presented and measurement results of the key operating parameters are discussed. Static and dynamic performance of the developed silicon strip detectors are shown to be very satisfactory for experimental physics applications. Results relating to the developed, novel CT detector chips are found to be very promising for further development and all key performance goals are met.

Bariatric and Post-Bariatric Surgery: from Metabolic Surgery to Plastic Surgery Indications

Background: Controversy exists concerning indications and outcomes of major bariatric surgery procedures. Massive weight loss after bariatric surgery leads to excess skin with functional and aesthetic impairments. The aim of this study was to investigate the major bariatric surgery procedures and their outcomes in two specific subgroups of morbidly obese patients, ≥55-year-olds and the superobese. Further aims were to evaluate whether the preoperative weight loss correlates with laparoscopic gastric bypass complications. The prevalence and impact of excess skin and the desire for body contouring after bariatric surgery were also studied. Patients and Methods: Data from patients who underwent Laparoscopic Adjustable Gastric Banding (LAGB) and Laparoscopic Roux-en-Y Gastric Bypass (LRYGB) at Vaasa Central Hospital were collected and postoperative outcomes were evaluated according to the BMI, age and preoperative weight loss. Patients who had undergone bariatric surgery procedures were asked to complete a questionnaire to estimate any impairment due to redundant skin and to analyse each patient’s desire for body contouring by area. Results: No significant difference was found in operative time, hospital stay, or overall early postoperative morbidity between LAGB and LRYGB. Mean excess weight loss percents (EWL%) at 6 and 12 months after LRYGB were significantly higher. A significant difference was found in operative time favouring patients <55 years. Intraoperative complications were significantly more frequent in the group aged >55 years. No significant difference was detected in overall postoperative morbidity rates. A significant difference was found in operative time and hospital stay favouring all patients who lost weight preoperatively. Most patients reported problems with redundant skin, especially on the abdomen, upper arms and rear/buttocks, which impaired daily physical activity in half of them. Excess skin was significantly associated with female gender, weight loss and ΔBMI. Patients with a WL >20 kg, ΔBMI ≥10 kg/m2 and an EWL % > 50 showed a significantly surplus skin discomfort (p < 0.001). Most patients desired body contouring surgery, with high or very high desire for waist/abdomen (62.2%), upper arm (37.6%), chest/breast (28.3%), and rear/buttock (35.6%) contouring. Conclusions: LRYGB is effective and safe in superobese (BMI >50) and elderly (>55 years) patients. A preoperative weight loss >5% is recommended to improve the outcomes and reduce complications. A WL >20 kg, ΔBMI ≥10 kg/m2 and an EWL % > 50 are associated with a higher functional discomfort due to redundant skin and to a stronger desire for body contouring plastic surgery.

Natural freeze crystallization : purification of aqueous Na2SO4 solutions with cold air

The aim of this thesis was to examine efficiency of freeze crystallization and eutectic freeze crystallization in purification of wastewater by imitating natural freezing. In addition, a mathematic model based on heat transfer to determine ice thickness and ice growth rate was examined. Also, the amount of sodium sulfate crystallized at the eutectic point was under investigation. In literature part, advantages and applications of the freeze crystallization are discussed, and possibility to apply it in Northern hemisphere winter weather conditions is under study. Furthermore, main sources of sodium sulfate from Finnish industries are described. The experiments were carried out in modified chest freezer, where a fan was placed in order to obtain laminar air flow inside. Picolog PT-104 data logger was used to monitor temperature changes in the salt-water solution, and constant temperature was maintained in the crystallizer with Lauda RP 850 thermostat. The impurity of formed ice layer was determined by weighing ice samples after experiment and again after 24 hours drying to full dryness in oven. Volume of salt-water solution was also measured after experiment. The highest purity of formed ice layer was obtained with small temperature difference and with long freezing time. On the other hand, the amount of crystallized sodium sulfate was its greatest with long freezing time and higher temperature difference. The results obtained by the mathematic model and empirical results did not differ significantly in most of the experiments. However, the difference increased when salt-water mixture reached its eutectic point, leading to simultaneous ice and salt crystallization. Eutectic point was reached only with the highest salt concentration with one exception. In these cases, calculated values were in many cases greater than the experimental ones. In winter weather conditions freeze crystallization is cost-effective wastewater treatment method and rather simple. Nonetheless, the efficiency and separation rate are strongly depended on ambient temperature and its changes

Framework for Marketing Automation: Case Vaisala

Työ käsittelee Markkinoinnin Automaatiota, viitekehyksen rakentamista Markkinoinnin Automaation käyttöönottoon ja sen hyödyntämiselle markkinoinnin ja myynnin putken hallinnassa. Työ on suoritettu tapaustutkimuksena, jonka primääri datana on käytetty puoli-strukturoituja haastatteluja ja sekundääri datana on käytetty dataa myynnin tietojärjestelmistä. Kirjallisuuskatsaus markkinoinnin automaatioon paljastaa, että aihetta ei ole juurikaan tutkittu akateemisesti. Etenkin selkeitä aukkoja teorioissa on miten markkinoinnin automaatiota kannattaisi aloittaa ja miten siihen tarvittavia kamppanjoita kannattaisi rakentaa. Tapaustutkimuksen tuloksena selvisi selkeät ongelma kohdat nykysessä markkinoinnin ja myynnin putkessa, ja myös kohdat joissa markkinoinnin automaatio voi olla avuksi. Suurin osa ongelma kohdista on markkinoinnin ja myynnin välissä. Toimiakseen markkinoinnin automaatio vaatii selkeät määritykset yrityksessä Liidille ja miten sitä käsitellään. Toimivuuden takaamiseksi se tarvitsee myös jatkuvaa palautetta liideistä ja myynneistä. Alue mikä myös tarvitsee muutosta paremman toimivuuden takaamiseksi on markkinoinnin kamppanjoiden suunnittelu, yhdessä myynnin kanssa ja asiakkaan polku edellä. Tulevaisuuden tavoitteena tulisi olla viestien personointi ja asiakkaiden profilointi. Tulevaisuuden tutkimuskohteet olisivat erittäin avuliaita yrityksille, varsinki jos ne käsittelisivät käyttöönottoa tai personointia.