Fosforin kierron sulkeminen systeemi-innovaationa, case: Biomeri Oy

Phosphorus is a vital raw material but there is a threat that world's phosphorus reserves will diminish. It is essential to utilize phosphorus in order to feed world's population. Nevertheless phosphorus consumption causes some severe environmental problems. To solve these problems a large-scale change such as system innovation is required. System innovation is structural transition which influence on many interest groups and their interactions. One of the most potential solutions lie on phosphorus recovery. Unfortunately recovery faces many social barriers. This study examines case -company Biomeri Oy, because this company has developed an environmental innovation which meets the same problems as phosphorus recovery.

Ekologinen kestävyys Suomen innovaatiojärjestelmässä

Tämän diplomityön tavoitteena on tutkia ekologisen kestävyyden huomioimista Suomen innovaatiojärjestelmässä. Ekologinen kestävyys on osa laajempaa kestävän kehityksen käsitettä, joka syntyi jo 1980-luvun lopulla. Sillä viitataan toimintaan, joka jättää mahdollisuuksia tuleville sukupolville yhtä paljon tai enemmän kuin nykyään on käytettävissä. Kestävyyteen pyritään nykyisin laajalti ja sen toteutumisen turvaamiseksi on laadittu muun muassa EU-maat, Pohjoismaat ja Suomen kattavat strategiat. Ekologisen kestävyyden suurimmat uhat ovat tällä hetkellä ilmastonmuutos, biodiversiteetin pieneneminen ja ravinteiden kierto. Kestävä innovointi ja ympäristöinnovaatiot ovat tärkeitä keinoja ekologiseen kestävyyteen panostettaessa. Näissä innovaatioissa kyse on teknologian, talouden ja ympäristön tasapainosta. Suomen innovaatiotoimintaa tuetaan ja kansallista kilpailukykyä pidetään yllä kansallisen innovaatiojärjestelmän avulla. Suomen innovaatiojärjestelmässä on useita eri tason toimijoita. Tärkeimpinä voidaan pitää päättäjiä, rahoittajia ja tutkimuksen tuottajia. Rahoituksen suuntaaminen vaikuttaa siihen, mistä aihealueista tutkimusta tuotetaan. Suomen Akatemialla, Tekesillä ja Sitralla on ekologista kestävyyttä edistäviä ohjelmia. Lisäksi mm. SHOK:issa on huomioitu ekologisuus. Perustutkimusta rahoitetaan Suomen innovaatiojärjestelmässä huomattavasti soveltavaa tutkimusta vähemmän. Ekologiseen kestävyyteen panostavan tutkimuksen teemoista nousee selkeimmin esiin kestävä energiantuotanto sekä kestävä rakentaminen. Jatkotutkimuksena voisi selvittää, kuinka nämä panostukset ovat vaikuttaneet suomalaiseen rakennusalaan.

Environmental inFluences on the Adoption of Open Innovation: Analysis of Structural, Institutional and Cultural Impacts

The concept of open innovation has recently gained widespread attention, and is particularly relevant now as many firms endeavouring to implement open innovation, face different sets of challenges associated with managing it. Prior research on open innovation has focused on the internal processes dealing with open innovation implementation and the organizational changes, already taking place or yet required in companies order to succeed in the global open innovation market. Despite the intensive research on open innovation, the question of what influences its adoption by companies in different contexts has not received much attention in studies. To fill this gap, this thesis contribute to the discussion on open innovation influencing factors by bringing in the perspective of environmental impacts, i.e. gathering data on possible sources of external influences, classifying them and testing their systemic impact through conceptual system dynamics simulation model. The insights from data collection and conceptualization in modelling are used to answer the question of how the external environment affects the adoption of open innovation. The thesis research is presented through five research papers reflecting the method triangulation based study (conducted at initial stage as case study, later as quantitative analysis and finally as system dynamics simulation). This multitude of methods was used to collect the possible external influence factors and to assess their impact (on positive/negative scale rather than numerical). The results obtained throughout the thesis research bring valuable insights into understanding of open innovation influencing factors inside a firm’s operating environment, point out the balance required in the system for successful open innovation performance and discover the existence of tipping point of open innovation success when driven by market dynamics and structures. The practical implications on how firms and policy-makers can leverage environment for their potential benefits are offered in the conclusions.

On the innovation capacity of technologyrelated knowledge-intensive business services. A case study of the technology and engineering consulting (TEC) sector in Singapore

Even though the research on innovation in services has expanded remarkably especially during the past two decades, there is still a need to increase understanding on the special characteristics of service innovation. In addition to studying innovation in service companies and industries, research has also recently focused more on services in innovation, as especially the significance of so-called knowledge intensive business services (KIBS) for the competitive edge of their clients, othercompanies, regions and even nations has been proved in several previous studies. This study focuses on studying technology-based KIBS firms, and technology andengineering consulting (TEC) sector in particular. These firms have multiple roles in innovation systems, and thus, there is also a need for in-depth studies that increase knowledge about the types and dimensions of service innovations as well as underlying mechanisms and procedures which make the innovations successful. The main aim of this study is to generate new knowledge in the fragmented research field of service innovation management by recognizing the different typesof innovations in TEC services and some of the enablers of and barriers to innovation capacity in the field, especially from the knowledge management perspective. The study also aims to shed light on some of the existing routines and new constructions needed for enhancing service innovation and knowledge processing activities in KIBS companies of the TEC sector. The main samples of data in this research include literature reviews and public data sources, and a qualitative research approach with exploratory case studies conducted with the help of the interviews at technology consulting companies in Singapore in 2006. These complement the qualitative interview data gathered previously in Finland during a larger research project in the years 2004-2005. The data is also supplemented by a survey conducted in Singapore. The respondents for the survey by Tan (2007) were technology consulting companies who operate in the Singapore region. The purpose ofthe quantitative part of the study was to validate and further examine specificaspects such as the influence of knowledge management activities on innovativeness and different types of service innovations, in which the technology consultancies are involved. Singapore is known as a South-east Asian knowledge hub and is thus a significant research area where several multinational knowledge-intensive service firms operate. Typically, the service innovations identified in the studied TEC firms were formed by several dimensions of innovations. In addition to technological aspects, innovations were, for instance, related to new client interfaces and service delivery processes. The main enablers of and barriers to innovation seem to be partly similar in Singaporean firms as compared to the earlier study of Finnish TEC firms. Empirical studies also brought forth the significance of various sources of knowledge and knowledge processing activities as themain driving forces of service innovation in technology-related KIBS firms. A framework was also developed to study the effect of knowledge processing capabilities as well as some moderators on the innovativeness of TEC firms. Especially efficient knowledge acquisition and environmental dynamism seem to influence the innovativeness of TEC firms positively. The results of the study also contributeto the present service innovation literature by focusing more on 'innovation within KIBs' rather than 'innovation through KIBS', which has been the typical viewpoint stressed in the previous literature. Additionally, the study provides several possibilities for further research.

Diffusion of Administrative Innovation: TQM Implementation and Effectiveness in a Global

The main objective of this dissertation is to create new knowledge on an administrative innovation, its adoption, diffusion and finally its effectiveness. In this dissertation the administrative innovation is approached through a widely utilized management philosophy, namely the total quality management (TQM) strategy. TQM operationalizes a self-assessment procedure, which is based on continual improvement principles and measuring the improvements. This dissertation also captures the theme of change management as it analyzes the adoption and diffusion of the administrative innovation. It identifies innovation characteristics as well as organisational and individual factors explaining the adoption and implementation. As a special feature, this study also explores the effectiveness of the innovation based on objective data. For studying the administrative innovation (TQM model), a multinational Case Company provides a versatile ground for a deep, longitudinal analysis. The Case Company started the adoption systematically in the mid 1980s in some of its units. As part of their strategic planning today, the procedure is in use throughout the entire global company. The empirical story begins from the innovation adoption decision that was made in the Case Company over 22 years ago. In order to be able to capture the right atmosphere and backgrounds leading to the adoption decision, key informants from that time were interviewed, since the main target was to clarify the dynamics of how an administrative innovation develops. In addition, archival material was collected and studied, available memos and data relating to the innovation, innovation adoption and later to the implementation contained altogether 20500 pages of documents. A survey was furthermore conducted at the end of 2006 focusing on questions related to the innovation, organization and leadership characteristics and the response rate totalled up to 54%. For measuring the effectiveness of the innovation implementation, the needed longitudinal objective performance data was collected. This data included the profit unit level experience of TQM, the development of the self assessment scores per profit unit and performance data per profit unit measured with profitability, productivity and customer satisfaction. The data covered the years 1995-2006. As a result, the prerequisites for the successful adoption of an administrative innovation were defined, such as the top management involvement, support of the change agents and effective tools for implementation and measurement. The factors with the greatest effect on the depth of the implementation were the timing of the adoption and formalization. The results also indicated that the TQM model does have an effect on the company performance measured with profitability, productivity and customer satisfaction. Consequently this thesis contributes to the present literature (i) by taking into its scope an administrative innovation and focusing on the whole innovation implementation process, from the adoption, through diffusion until its consequences, (ii) because the studied factors with an effect on the innovation adoption and diffusion are multifaceted and grouped into individual, organizational and environmental factors, and a strong emphasis is put on the role of the individual change agents and (iii) by measuring the depth and consistency of the administrative innovation. This deep analysis was possible due to the availability of longitudinal data with triangulation possibilities.

Integrating eco-innovation principles into regional strategy and policy: case of Päijät-Häme region, Finland

This study focuses on the integration of eco-innovation principles into strategy and policy at the regional level. The importance of regions as a level for integrating eco-innovative programs and activities served as the point of interest for this study. Eco-innovative activities and technologies are seen as means to meet sustainable development objective of improving regions’ quality of life. This study is conducted to get an in-depth understanding and learning about eco-innovation at regional level, and to know the basic concepts that are important in integrating eco-innovation principles into regional policy. Other specific objectives of this study are to know how eco-innovation are developed and practiced in the regions of the EU, and to analyze the main characteristic features of an eco-innovation model that is specifically developed at Päijät-Häme Region in Finland. Paijät-Häme Region is noted for its successful eco-innovation strategies and programs, hence, taken as casework in this study. Both primary (interviews) and secondary data (publicly available documents) are utilized in this study. The study shows that eco-innovation plays an important role in regional strategy as reviewed based on the experience of other regions in the EU. This is because of its localized nature which makes it easier to facilitate in a regional setting. Since regional authorities and policy-makers are normally focused on solving its localized environmental problems, eco-innovation principles can easily be integrated into regional strategy. The case study highlights Päijät-Häme Region’s eco-innovation strategies and projects which are characterized by strong connection of knowledge-producing institutions. Policy instruments supporting eco-innovation (e.g. environmental technologies) are very much focused on clean technologies, hence, justifying the formation of cleantech clusters and business parks in Päijät-Häme Region. A newly conceptualized SAMPO model of eco-innovation has been developed in Päijät-Häme Region to better capture the region’s characteristics and to eventually replace the current model employed by the Päijät-Häme Regional Authority. The SAMPO model is still under construction, however, review of its principles points to some of its three important spearheads – practice-based innovation, design (eco-design) and clean technology or environmental technology (environment).

Regional innovation strategies and sustainability in selected EU countries

This study focuses on regional innovation strategy (RIS) and sustainability aspects in selected regions of European Union (EU) countries. It is known that RIS helps a region to innovate locally and to compete globally and it is considered as one of the main policy tools of the EU for innovation support at a regional level. This study is conducted to explore the existence and adoption of RIS in different regions of selected EU countries, and to highlight and compare regional RIS characteristics. The study is also aimed at identifying the factors that characterise the formulation and implementation of RIS as well as the problems associated thereof. In this study, six regions of EU countries are considered: Päijät-Häme Region (Finland); London Region (United Kingdom); Mid-West Region (Ireland); Veneto Region (Italy); Eastern Region (Poland); and West Region (Romania). Data and information are collected by sending questionnaires to the respective regional authorities of these selected regions. Based on the gathered information and analysis, RIS or equivalent strategy document serves as a blueprint for forwarding innovative programmes towards regional sustainability. The objectives of RIS in these regions are found to be dependent on the priority sectors and state of the region’s development. The current environmental sustainability aspects are focused on eco-design, eco-products, and eco-innovation, although each region also has its own specific aspects supported by RIS. Likewise, regional policies typically follow the RIS yet translated in various sectoral focus or priority areas. The main enhancing factors supporting RIS among selected regions have some similarities and variations; among others, some regions are strongly supported by EU while others have support from own regional agencies, organisations and professional networks. RIS implementation is not without challenges and despite the differences in challenges, almost all of reviewed regions consider financial resource as a common problem. Generally, it is learned from this study that RIS and regional sustainability are reinforcing each other mutually. In this study, the strong focus is given towards environmental sustainability in the regions although regional sustainability also includes economic and social aspects. A well-focused and prioritised RIS is beneficial for regional sustainable development.

The effect of dynamic capabilities on operational-level innovation – Empirical study in magazine publishing industry

This master’s thesis aims to examine the relationship between dynamic capabilities and operational-level innovations. In addition, measures for the concept of dynamic capabilities are developed. The study was executed in the magazine publishing industry which is considered favourable for examining dynamic capabilities, since the sector is characterized by rapid change. As a basis for the study and the measure development, a literary review was conducted. Data for the empirical section was gathered by a survey targeted to chief-editors of Finnish consumer magazines. The relationship between dynamic capabilities and innovation was examined by multiple linear regression. The results indicate that dynamic capabilities have effect on the emergence of radical innovations. Environmental dynamism’s effect on radical innovations was not detected. Also, dynamic capabilities’ effect on innovation was not greater in turbulent operating environment.

Innovation in a Non-Formal Adult Education Organisation – Multi-Case Study in Four Adult Education Centres

More than ever, education organisations are experiencing the need to develop new services and processes to satisfy expanding and changing customer needs and to adapt to the environmental changes and continually tightening economic situation. Innovation has been found in many studies to have a crucial role in the success of an organisation, both in the private and public sectors, in formal education and in manufacturing and services alike. However, studies concerning innovation in non-formal adult education organisations, such as adult education centres (AECs) in Finland, are still lacking. This study investigates innovation in the non-formal adult education organisation context from the perspective of organisational culture types and social networks. The objective is to determine the significant characteristics of an innovative non-formal adult education organisation. The analysis is based on data from interviews with the principals and fulltime staff of four case AECs. Before the case study, a pre-study phase is accomplished in order to obtain a preliminary understanding of innovation at AECs. The research found strong support for the need of innovation in AECs. Innovation is basically needed to accomplish the AEC system’s primary mission mentioned in the ACT on Liberal Adult Education. In addition, innovation is regarded vital to institutes and may prevent their decline. It helps the institutes to be more attractive, to enter new market, to increase customer satisfaction and to be on the cutting edge. Innovation is also seen as a solution to the shortage of resources. Innovative AECs search actively for additional resources for development work through project funding and subsidies, cooperation networks and creating a conversational and joyful atmosphere in the institute. The findings also suggest that the culture type that supports innovation at AECs is multidimensional, with an emphasis on the clan and adhocratic culture types and such values as: dynamism, future orientation, acquiring new resources, mistake tolerance, openness, flexibility, customer orientation, a risk-taking attitude, and community spirit. Active and creative internal and external cooperation also promote innovation at AECs. This study also suggests that the behaviour of a principal is crucial. The way he or she shows appreciation the staff, encouragement and support to the staff and his or her approachability and concrete participation in innovation activities have a strong effect on innovation attitudes and activities in AECs.

Tracing Innovation Practices in Seaports: the Ports of Klaipeda and Stockholm as Case Studies

This study explores variegated means through which ports have become increasingly entangled in the planning logic of neoliberal innovation-driven economy. The research topic belongs to the academic disciplines of economics and human geography. The aim of the thesis is to analyse how the notion of innovation, adopted in a variety of supranational and national port policy documents, is deployed in operational port environment in two different ports of the Baltic Sea Region: the port of Stockholm, Sweden, and the port of Klaipeda, Lithuania. This novel innovation agenda is visible in several topics I examine in the study, that is, port governance, environmental issues, and seaport – port-city interface. The gathered primary source material on port policy documents, strategies, development planning documents and reports is analysed by utilizing the qualitative content analysis research method. Moreover, the empirical part of the case study, that is, tracing innovation practices in mundane port activities is based on collected qualitative semi-structured interviews with port authorities in Klaipeda and Stockholm, researchers and other port experts. I examine the interview material by employing the theoretical reading research method. In my analysis, I have reframed port-related policy development by tracing and identifying the port transformation from “functional terminals” to “engines for growth”. My results show that this novel innovation-oriented rhetoric imprinted in the narrative “engines for growth” is often contested in daily port practices. In other words, my analysis reveals that the port authorities’ and other port actors’ attitudes towards innovations do not necessarily correspond to the new narrative of innovation and do not always “fit” within a framework of neoliberal economic thinking that glorifies the “culture of innovations”. I argue that the ability to develop innovative initiatives in the ports of Klaipeda and Stockholm is strongly predetermined by local conditions, a port’s governance model, the way port actors perceive the importance of innovations per se, demand factors and new regulations.

EU Strategy for the Baltic Sea Region: its added value in environmental social and economic dimensions

The European Council has invited the European Commission to present the first macro-regional strategy – the EU Strategy for the Baltic Sea Region (EUSBSR) on the 14th of December 2007, primarily to address collective challenges and opportunities of the Region and also to engender cohesion in support of an European integration policy. However, macro-regional strategies conceived to aid European integration and territorial cohesion were viewed by academics with skepticism, obscuring the strategies’ potential impact. This thesis intends to investigate and measure the added value of the EUSBSR in order to analyze its impact on regional development and its feasibility as a guide for future programs intending to strengthen European cohesion and integration. To determine the added value of the EUSBSR the thesis is organized into three sections, so as to address environmental, social, and economic concerns, respectively. The first case examines EU-Russia cooperation in an environmental context to investigate how environmental cooperation with an external neighbor could forge increased cohesion in a macro-regional setting. To figure the added cooperation that academic cooperation among universities would contribute to social dimension, the work has chosen several study results. Lastly, to measure out the added value for the economic strategy objective, the study employs the project for Improved Global Competitiveness in an example of ‘A Baltic Sea Region Program for Innovation, Cluster and SME-Networks’ as an economic plan.

Adaptability, Transformation and Complex Changes in Namibia and Tanzania: Resilience and Innovation System Development in Local Communities

This thesis is a research about the recent complex spatial changes in Namibia and Tanzania and local communities’ capacity to cope with, adapt to and transform the unpredictability engaged to these processes. I scrutinise the concept of resilience and its potential application to explaining the development of local communities in Southern Africa when facing various social, economic and environmental changes. My research is based on three distinct but overlapping research questions: what are the main spatial changes and their impact on the study areas in Namibia and Tanzania? What are the adaptation, transformation and resilience processes of the studied local communities in Namibia and Tanzania? How are innovation systems developed, and what is their impact on the resilience of the studied local communities in Namibia and Tanzania? I use four ethnographic case studies concerning environmental change, global tourism and innovation system development in Namibia and Tanzania, as well as mixed-methodological approaches, to study these issues. The results of my empirical investigation demonstrate that the spatial changes in the localities within Namibia and Tanzania are unique, loose assemblages, a result of the complex, multisided, relational and evolutional development of human and non-human elements that do not necessarily have linear causalities. Several changes co-exist and are interconnected though uncertain and unstructured and, together with the multiple stressors related to poverty, have made communities more vulnerable to different changes. The communities’ adaptation and transformation measures have been mostly reactive, based on contingency and post hoc learning. Despite various anticipation techniques, coping measures, adaptive learning and self-organisation processes occurring in the localities, the local communities are constrained by their uneven power relationships within the larger assemblages. Thus, communities’ own opportunities to increase their resilience are limited without changing the relations in these multiform entities. Therefore, larger cooperation models are needed, like an innovation system, based on the interactions of different actors to foster cooperation, which require collaboration among and input from a diverse set of stakeholders to combine different sources of knowledge, innovation and learning. Accordingly, both Namibia and Tanzania are developing an innovation system as their key policy to foster transformation towards knowledge-based societies. Finally, the development of an innovation system needs novel bottom-up approaches to increase the resilience of local communities and embed it into local communities. Therefore, innovation policies in Namibia have emphasised the role of indigenous knowledge, and Tanzania has established the Living Lab network.

Integrated environmental research and networking of economy and information in rural areas of Finland

Selostus: Kestävän kehityksen integroidun tutkimuksen ja verkostotalouden teorian tutkimusmenetelmälliset ongelmat