Methods for the analysis of two dimensional measurement data of paper web

This work is devoted to the problem of reconstructing the basis weight structure at paper web with black{box techniques. The data that is analyzed comes from a real paper machine and is collected by an o®-line scanner. The principal mathematical tool used in this work is Autoregressive Moving Average (ARMA) modelling. When coupled with the Discrete Fourier Transform (DFT), it gives a very flexible and interesting tool for analyzing properties of the paper web. Both ARMA and DFT are independently used to represent the given signal in a simplified version of our algorithm, but the final goal is to combine the two together. Ljung-Box Q-statistic lack-of-fit test combined with the Root Mean Squared Error coefficient gives a tool to separate significant signals from noise.

Optinen kolmiulotteinen mittaus ohutlevytuotteiden laadunvalvonnassa

Ohutlevyteollisuuden markkinatilanne on muuttunut, kun tuotantomäärät ovat kasvaneet, laatuvaatimukset tiukentuneet ja markkinat globalisoituneet. Konenäön avulla on mahdollista tehostaa laadunvalvontaa, jolloin virheet voidaan havaita nopeammin ja siten säästää tuotantokustannuksissa. Muotoiltujen ohutlevyosien tarkastamiseksi tarvitaan kolmiulotteisia mittausmenetelmiä, joilla pystytään varsin nopeasti ja tarkasti analysoimaan kappaleita. Erityisesti fotogrammetriaan perustuvaa rakenteista valoa on sovellettu erilaisissa mittalaitteissa, ja menetelmä on myös varsin joustava sekä edullinen käyttää. Fotogrammetriaan ja rakenteiseen valoon perustuvista mittalaitteista valittiin arvioitavaksi Mapvision 4D. Testeissä tutkittiin laitteen tarkkuutta, nopeutta ja soveltuvuutta teollisuusympäristöön sekä erityisesti taivutuskulmien, reikien halkaisijoidenja etäisyyksien mittaamista. Sovittamalla mitattu data CAD-malliin pystytään kappaleen mitoitus tarkastamaan vaaditulla 0,1 millimetrin tarkkuudella. Testitulosten perusteella voidaan todeta sekä mittalaitteen että mittausmenetelmän soveltuvan ohutlevykappaleiden laadunvalvontaan, kunhan reunojen määrityksessä esiintyvä säännöllinen epätarkkuus otetaan huomioon.

Optimisation of data analysis method for a fluidized bed combustion test rig

Nowadays the used fuel variety in power boilers is widening and new boiler constructions and running models have to be developed. This research and development is done in small pilot plants where more faster analyse about the boiler mass and heat balance is needed to be able to find and do the right decisions already during the test run. The barrier on determining boiler balance during test runs is the long process of chemical analyses of collected input and outputmatter samples. The present work is concentrating on finding a way to determinethe boiler balance without chemical analyses and optimise the test rig to get the best possible accuracy for heat and mass balance of the boiler. The purpose of this work was to create an automatic boiler balance calculation method for 4 MW CFB/BFB pilot boiler of Kvaerner Pulping Oy located in Messukylä in Tampere. The calculation was created in the data management computer of pilot plants automation system. The calculation is made in Microsoft Excel environment, which gives a good base and functions for handling large databases and calculations without any delicate programming. The automation system in pilot plant was reconstructed und updated by Metso Automation Oy during year 2001 and the new system MetsoDNA has good data management properties, which is necessary for big calculations as boiler balance calculation. Two possible methods for calculating boiler balance during test run were found. Either the fuel flow is determined, which is usedto calculate the boiler's mass balance, or the unburned carbon loss is estimated and the mass balance of the boiler is calculated on the basis of boiler's heat balance. Both of the methods have their own weaknesses, so they were constructed parallel in the calculation and the decision of the used method was left to user. User also needs to define the used fuels and some solid mass flowsthat aren't measured automatically by the automation system. With sensitivity analysis was found that the most essential values for accurate boiler balance determination are flue gas oxygen content, the boiler's measured heat output and lower heating value of the fuel. The theoretical part of this work concentrates in the error management of these measurements and analyses and on measurement accuracy and boiler balance calculation in theory. The empirical part of this work concentrates on the creation of the balance calculation for the boiler in issue and on describing the work environment.

Aerosolien vaikutus säteilynkulkuun ilmakehässä

Aerosolien vaikutusta säteilynkulkuun ilmakehässä tutkitaan muun muassa niiden ilmastonmuutokseen vaikuttavien ominaisuuksien sekä erilaisten maanpuolustukseen liittyvien sovellusten vuoksi. Tässä työssä keskityttiin aerosolien aiheuttamaan infrapunasäteilyn vaimenemiseen horisontaalisella polulla. Mitattuja vaimennuksen arvoja verrattiin mallinnettuihin ja etsittiin syitä niiden välisiin eroihin. Työn alussa tutustuttiin aerosolien tyypillisiin ominaisuuksiin sekä säteilyn ja aerosolien väliseen vuorovaikutukseen. Tämän jälkeen esiteltiin mittauksissa käytetyt laitteet sekä mallinnuksessa käytetty ohjelmisto ja tiedonkäsittely. Työssä tutkittiin mitattujen ja mallinnettujen aerosolivaimennuskertoimien käyttäytymistä eri sääpametrien (näkyvyys, suhteellinen kosteus ja lämpötila) suhteen. Tutkimuksessa tarkasteltiin myös mitattuja kokojakaumia ja niitä verrattiin mallinnuksessa käytettyihin. Mittalaitteiden epävarmuuksien ja käyttökelpoisten mittaustulosten vähyyden johdosta täyttä varmuutta mittauksien tarkkuudesta ei saavutettu. Mittausten epävarmuudesta huolimatta kävi ilmi, että mitatut kokojakaumat eivät täysin vastaa mallin käyttämiä kokojakaumia. Tulevaisuudessa mittauksia pitää jatkaa, jotta tiedon analysointiin saadaan tarpeeksi kelvollisia mittaustuloksia ja mittalaitteiden luotettavuus selviää.

Selvityksiä reaktiokalorimetrin soveltuvuudesta hydrometallurgiaan

Tämän työn tavoitteena oli reaktiokalorimetrin käyttöönotto sekä sen käyttökelpoisuuden selvittäminen hydrometallurgisten sovellusten ja erityisesti sinkkisulfidin liuotuksen tutkimiseen. Työn kirjallisuusosassa on käsitelty yleisellä tasolla kalorimetrian ja reaktiokalorimetrian teoriaa, termodynamiikkaa sekä sinkkirikasteen liuotuksen kemiaa. Lisäksi työssä esitellään erilaisten kalorimetrien ja termoanalyyttisten mittauslaitteiden toimintaperiaatteita. Työn kokeellisessa osassa selvitettiin reaktiokalorimetrin mittaustulosten tarkkuutta vesi- kokeiden avulla. Laitteistolla määritettiin myös reaktiolämmöt sinkkisulfidin liukenemisreaktiolle sekä elohopeasuolan saostusreaktiolle. Lisäksi tutkittiin sekoitusnopeuden, lämpötilan ja kiintoainepitoisuuden vaikutusta mittaustuloksiin. Reaktiokalorimetrillä suoritettujen kokeiden perusteella havaittiin, että reaktiolämpöjen absoluuttisten arvojen määrittäminen laitteistolla on käytännössä vaikeaa. Koska reaktiokalorimetrillä pystytään määrittämään vain mittauksen aikana tapahtunut kokonaislämpömuutos, vaikuttavat mahdolliset faasimuutokset ja reaktorin lämpöhäviöt mittaustuloksiin. Näiden tekijöiden vaikutus on pyrittävä eliminoimaan tai niiden vaikutus on tunnettava tarkkaan, jos laitteella halutaan saada luotettavia reaktiolämpömittaustuloksia. Laitteiston mittaustarkkuus huononee huomattavasti, kun reaktorin lämpötila nousee yli 60 °C:een. Laitteistolla mitatut reaktiolämmöt poikkeavat huomattavasti vastaavista kirjallisuuden arvoista. Vedelle määritetyt ominaislämpökapasiteetit poikkeavat kirjallisuuden arvoista enintään 5 alle 90 °C:een lämpötilassa.

Statistical Analysis and Numerics of Heat Exchanger Models

The identifiability of the parameters of a heat exchanger model without phase change was studied in this Master’s thesis using synthetically made data. A fast, two-step Markov chain Monte Carlo method (MCMC) was tested with a couple of case studies and a heat exchanger model. The two-step MCMC-method worked well and decreased the computation time compared to the traditional MCMC-method. The effect of measurement accuracy of certain control variables to the identifiability of parameters was also studied. The accuracy used did not seem to have a remarkable effect to the identifiability of parameters. The use of the posterior distribution of parameters in different heat exchanger geometries was studied. It would be computationally most efficient to use the same posterior distribution among different geometries in the optimisation of heat exchanger networks. According to the results, this was possible in the case when the frontal surface areas were the same among different geometries. In the other cases the same posterior distribution can be used for optimisation too, but that will give a wider predictive distribution as a result. For condensing surface heat exchangers the numerical stability of the simulation model was studied. As a result, a stable algorithm was developed.

Sähköauto osana älykästä sähköverkkoa – Ohjaus ja toiminnallisuudet

Tulevaisuudessa sähköverkko kohtaa monia haasteita, kun sähköautot yleistyvät, vaatien suuren tehotarpeen. Uusiutuvan energiantuotannon epävarma huipputehon tuotanto ei välttämättä pysty kattamaan sähköautoista johtuvaa suurta tehopiikkiä, jos suuret määrät ajoneuvoista kytketään yhtä aikaa lataukseen. Jos sähköajoneuvot voidaan ladata ohjatusti, ei välttämättä tarvita lisäenergian tuotantoa kattamaan kasvanutta huipputehon tarvetta. Lisäksi sähköajoneuvojen akut toimivat koko sähköverkolle energiavarastoina, jollaista ei ole ennen ollut. Älykkäällä sähköverkolla voidaan ohjata sähköajoneuvon latausta, mikäli ajoneuvossa on ohjausjärjestelmä ja akkujen varaustilan mittaus. Tässä kandidaatin työssä ohjelmoidaan mittaus- ja ohjauskortti plug-in hybridiautoa varten, jossa on V2G-ominaisuus. Ohjainkortista toteutetaan toimintakuvaus, jonka mukaan se myös ohjelmoidaan. Ohjainkortti mittaa akkujen jännitettä ja virtaa, joista voidaan määrittää akkujen varaustilat. Ohjainkortti lähettää tiedot eteenpäin PC:lle, jolta ohjainkortti saa käskyn toimintatilasta. Mittaustietojen perusteella voidaan seurata mahdollisia vikatilanteita. Kandidaatintyön aikana ohjainkorttia ei ehditty asentamaan ajoneuvoon, mutta laboratoriotestien mukaan voidaan todeta, että ohjainkortti on ohjelmallisesti toimiva. Mittauksissa selvisi, että ohjainkortin mittaustulot eivät olleet tarpeeksi tarkkoja käyttökohteeseen. Todettiin, että ohjainkortti vaatii rakenteellisia muutoksia mittaustuloksien parantamista varten, ennen ohjainkortin käyttöönottoa, mutta kandidaatintyön tavoitteet saavutettiin.

Statistical analysis of survey-based event history data with application to modeling of unemployment duration

Longitudinal surveys are increasingly used to collect event history data on person-specific processes such as transitions between labour market states. Surveybased event history data pose a number of challenges for statistical analysis. These challenges include survey errors due to sampling, non-response, attrition and measurement. This study deals with non-response, attrition and measurement errors in event history data and the bias caused by them in event history analysis. The study also discusses some choices faced by a researcher using longitudinal survey data for event history analysis and demonstrates their effects. These choices include, whether a design-based or a model-based approach is taken, which subset of data to use and, if a design-based approach is taken, which weights to use. The study takes advantage of the possibility to use combined longitudinal survey register data. The Finnish subset of European Community Household Panel (FI ECHP) survey for waves 1–5 were linked at person-level with longitudinal register data. Unemployment spells were used as study variables of interest. Lastly, a simulation study was conducted in order to assess the statistical properties of the Inverse Probability of Censoring Weighting (IPCW) method in a survey data context. The study shows how combined longitudinal survey register data can be used to analyse and compare the non-response and attrition processes, test the missingness mechanism type and estimate the size of bias due to non-response and attrition. In our empirical analysis, initial non-response turned out to be a more important source of bias than attrition. Reported unemployment spells were subject to seam effects, omissions, and, to a lesser extent, overreporting. The use of proxy interviews tended to cause spell omissions. An often-ignored phenomenon classification error in reported spell outcomes, was also found in the data. Neither the Missing At Random (MAR) assumption about non-response and attrition mechanisms, nor the classical assumptions about measurement errors, turned out to be valid. Both measurement errors in spell durations and spell outcomes were found to cause bias in estimates from event history models. Low measurement accuracy affected the estimates of baseline hazard most. The design-based estimates based on data from respondents to all waves of interest and weighted by the last wave weights displayed the largest bias. Using all the available data, including the spells by attriters until the time of attrition, helped to reduce attrition bias. Lastly, the simulation study showed that the IPCW correction to design weights reduces bias due to dependent censoring in design-based Kaplan-Meier and Cox proportional hazard model estimators. The study discusses implications of the results for survey organisations collecting event history data, researchers using surveys for event history analysis, and researchers who develop methods to correct for non-sampling biases in event history data.

Tukin mittaus ja optimointi sahalinjassa

Tukin mittaus ennen sahausta ja sahausasetteen optimointi on kehittynyt paljon viimeisen 10 vuoden aikana. Sahauksen kannattavuuden huonontuessa raaka-aineen tehokas hyödyntäminen on muodostunut tärkeäksi osaksi prosessia. Mittalaitteiden tekniikan kehityttyä on ollut mahdollista mitata tukin muoto ja halkaisijat eri kohdista entistä tarkemmin. Sahausasetteen optimoinnilla pyritään raaka-aineen mahdollisimman tehokkaaseen käyttöön eli saamaan mahdollisimman hyvä saanto jokaisesta yksittäisestä sahatusta tukista. Mittaustarkkuus on suoraan kytköksissä sahausasetteen optimointi tuloksen onnistumiseen. Yleisesti tukin mittaus ennen sahausta ja sahausasetteen optimointi tulevat samalta toimittajalta. Työssä tarkasteltiin kahden eri toimittajan tukkimittareita sekä optimoinnin onnistumista sen perusteella. Käytössä oli lasikuituinen mallitukki, jota mitattiin kummankin toimittajan mittareilla. Näin voitiin suoraan vertailla mittauksen ja optimoinnin onnistumista ja verrata sitä optimaalisiin tuloksiin. Työssä käytettiin kandidaatintyössä luomaani toimintamallia tukkimittarin tarkkuuden toteamiseksi. Mittaus- ja optimointivirheistä pystyttiin laskemaan, kuinka paljon tappiota sahalaitokselle aiheutui verrattuna optimaaliseen mittaus- ja optimointitulokseen. Jo pienetkin virheet optimoinnissa ja mittauksessa vaikuttavat sahauksen kannattavuuteen, kun tarkastellaan sahalaitosta jossa sahataan 8000 – 10 000 tukkia yhden työvuoron aikana. Tulosten perusteella mittarit mittaavat hieman virheellisesti, ja kummankin mittarin mittausten perusteella saatiin eri sahausasete optimointitulokseksi. Mittavirheen takia voitiin todeta, että parantamalla mittaustarkkuutta voidaan sahauksen kannattavuutta parantaa.

Remote sensing for three-dimensional modelling of hydromorphology

Successful management of rivers requires an understanding of the fluvial processes that govern them. This, in turn cannot be achieved without a means of quantifying their geomorphology and hydrology and the spatio-temporal interactions between them, that is, their hydromorphology. For a long time, it has been laborious and time-consuming to measure river topography, especially in the submerged part of the channel. The measurement of the flow field has been challenging as well, and hence, such measurements have long been sparse in natural environments. Technological advancements in the field of remote sensing in the recent years have opened up new possibilities for capturing synoptic information on river environments. This thesis presents new developments in fluvial remote sensing of both topography and water flow. A set of close-range remote sensing methods is employed to eventually construct a high-resolution unified empirical hydromorphological model, that is, river channel and floodplain topography and three-dimensional areal flow field. Empirical as well as hydraulic theory-based optical remote sensing methods are tested and evaluated using normal colour aerial photographs and sonar calibration and reference measurements on a rocky-bed sub-Arctic river. The empirical optical bathymetry model is developed further by the introduction of a deep-water radiance parameter estimation algorithm that extends the field of application of the model to shallow streams. The effect of this parameter on the model is also assessed in a study of a sandy-bed sub-Arctic river using close-range high-resolution aerial photography, presenting one of the first examples of fluvial bathymetry modelling from unmanned aerial vehicles (UAV). Further close-range remote sensing methods are added to complete the topography integrating the river bed with the floodplain to create a seamless high-resolution topography. Boat- cart- and backpack-based mobile laser scanning (MLS) are used to measure the topography of the dry part of the channel at a high resolution and accuracy. Multitemporal MLS is evaluated along with UAV-based photogrammetry against terrestrial laser scanning reference data and merged with UAV-based bathymetry to create a two-year series of seamless digital terrain models. These allow the evaluation of the methodology for conducting high-resolution change analysis of the entire channel. The remote sensing based model of hydromorphology is completed by a new methodology for mapping the flow field in 3D. An acoustic Doppler current profiler (ADCP) is deployed on a remote-controlled boat with a survey-grade global navigation satellite system (GNSS) receiver, allowing the positioning of the areally sampled 3D flow vectors in 3D space as a point cloud and its interpolation into a 3D matrix allows a quantitative volumetric flow analysis. Multitemporal areal 3D flow field data show the evolution of the flow field during a snow-melt flood event. The combination of the underwater and dry topography with the flow field yields a compete model of river hydromorphology at the reach scale.

Three-dimensional modeling of biomass fuel flow in a circulating fluidized bed furnace

The reduction of greenhouse gas emissions in the European Union promotes the combustion of biomass rather than fossil fuels in energy production. Circulating fluidized bed (CFB) combustion offers a simple, flexible and efficient way to utilize untreated biomass in a large scale. CFB furnaces are modeled in order to understand their operation better and to help in the design of new furnaces. Therefore, physically accurate models are needed to describe the heavily coupled multiphase flow, reactions and heat transfer inside the furnace. This thesis presents a new model for the fuel flow inside the CFB furnace, which acknowledges the physical properties of the fuel and the multiphase flow phenomena inside the furnace. This model is applied with special interest in the firing of untreated biomass. An experimental method is utilized to characterize gas-fuel drag force relations. This characteristic drag force approach is developed into a gas-fuel drag force model suitable for irregular, non-spherical biomass particles and applied together with the new fuel flow model in the modeling of a large-scale CFB furnace. The model results are physically valid and achieve very good correspondence with the measurement results from large-scale CFB furnace firing biomass. With the methods and models presented in this work, the fuel flow field inside a circulating fluidized bed furnace can be modeled with better accuracy and more efficiently than in previous studies with a three-dimensional holistic model frame.

Visual measurement of laser-arc hybrid welding

Tässä työssä raportoidaan hybridihitsauksesta otettujen suurnopeuskuvasarjojen automaattisen analyysijärjestelmän kehittäminen.Järjestelmän tarkoitus oli tuottaa tietoa, joka avustaisi analysoijaa arvioimaan kuvatun hitsausprosessin laatua. Tutkimus keskittyi valokaaren taajuuden säännöllisyyden ja lisäainepisaroiden lentosuuntien mittaamiseen. Valokaaria havaittiin kuvasarjoista sumean c-means-klusterointimenetelmän avullaja perättäisten valokaarien välistä aikaväliä käytettiin valokaaren taajuuden säännöllisyyden mittarina. Pisaroita paikannettiin menetelmällä, jossa yhdistyi pääkomponenttianalyysi ja tukivektoriluokitin. Kalman-suodinta käytettiin tuottamaan arvioita pisaroiden lentosuunnista ja nopeuksista. Lentosuunnanmääritysmenetelmä luokitteli pisarat niiden arvioitujen lentosuuntien perusteella. Järjestelmän kehittämiseen käytettävissä olleet kuvasarjat poikkesivat merkittävästi toisistaan kuvanlaadun ja pisaroiden ulkomuodon osalta, johtuen eroista kuvaus- ja hitsausprosesseissa. Analyysijärjestelmä kehitettiin toimimaan pienellä osajoukolla kuvasarjoja, joissa oli tietynlainen kuvaus- ja hitsausprosessi ja joiden kuvanlaatu ja pisaroiden ulkomuoto olivat samankaltaisia, mutta järjestelmää testattiin myös osajoukon ulkopuolisilla kuvasarjoilla. Testitulokset osoittivat, että lentosuunnanmääritystarkkuus oli kohtuullisen suuri osajoukonsisällä ja pieni muissa kuvasarjoissa. Valokaaren taajuuden säännöllisyyden määritys oli tarkka useammassa kuvasarjassa.

R&D Performance Analysis: Case Studies on the Challenges and Promotion of the Evaluation and Measurement of R&D

Due to the intense international competition, demanding, and sophisticated customers, and diverse transforming technological change, organizations need to renew their products and services by allocating resources on research and development (R&D). Managing R&D is complex, but vital for many organizations to survive in the dynamic, turbulent environment. Thus, the increased interest among decision-makers towards finding the right performance measures for R&D is understandable. The measures or evaluation methods of R&D performance can be utilized for multiple purposes; for strategic control, for justifying the existence of R&D, for providing information and improving activities, as well as for the purposes of motivating and benchmarking. The earlier research in the field of R&D performance analysis has generally focused on either the activities and considerable factors and dimensions - e.g. strategic perspectives, purposes of measurement, levels of analysis, types of R&D or phases of R&D process - prior to the selection of R&Dperformance measures, or on proposed principles or actual implementation of theselection or design processes of R&D performance measures or measurement systems. This study aims at integrating the consideration of essential factors anddimensions of R&D performance analysis to developed selection processes of R&D measures, which have been applied in real-world organizations. The earlier models for corporate performance measurement that can be found in the literature, are to some extent adaptable also to the development of measurement systemsand selecting the measures in R&D activities. However, it is necessary to emphasize the special aspects related to the measurement of R&D performance in a way that make the development of new approaches for especially R&D performance measure selection necessary: First, the special characteristics of R&D - such as the long time lag between the inputs and outcomes, as well as the overall complexity and difficult coordination of activities - influence the R&D performance analysis problems, such as the need for more systematic, objective, balanced and multi-dimensional approaches for R&D measure selection, as well as the incompatibility of R&D measurement systems to other corporate measurement systems and vice versa. Secondly, the above-mentioned characteristics and challenges bring forth the significance of the influencing factors and dimensions that need to be recognized in order to derive the selection criteria for measures and choose the right R&D metrics, which is the most crucial step in the measurement system development process. The main purpose of this study is to support the management and control of the research and development activities of organizations by increasing the understanding of R&D performance analysis, clarifying the main factors related to the selection of R&D measures and by providing novel types of approaches and methods for systematizing the whole strategy- and business-based selection and development process of R&D indicators.The final aim of the research is to support the management in their decision making of R&D with suitable, systematically chosen measures or evaluation methods of R&D performance. Thus, the emphasis in most sub-areas of the present research has been on the promotion of the selection and development process of R&D indicators with the help of the different tools and decision support systems, i.e. the research has normative features through providing guidelines by novel types of approaches. The gathering of data and conducting case studies in metal and electronic industry companies, in the information and communications technology (ICT) sector, and in non-profit organizations helped us to formulate a comprehensive picture of the main challenges of R&D performance analysis in different organizations, which is essential, as recognition of the most importantproblem areas is a very crucial element in the constructive research approach utilized in this study. Multiple practical benefits regarding the defined problemareas could be found in the various constructed approaches presented in this dissertation: 1) the selection of R&D measures became more systematic when compared to the empirical analysis, as it was common that there were no systematic approaches utilized in the studied organizations earlier; 2) the evaluation methods or measures of R&D chosen with the help of the developed approaches can be more directly utilized in the decision-making, because of the thorough consideration of the purpose of measurement, as well as other dimensions of measurement; 3) more balance to the set of R&D measures was desired and gained throughthe holistic approaches to the selection processes; and 4) more objectivity wasgained through organizing the selection processes, as the earlier systems were considered subjective in many organizations. Scientifically, this dissertation aims to make a contribution to the present body of knowledge of R&D performance analysis by facilitating dealing with the versatility and challenges of R&D performance analysis, as well as the factors and dimensions influencing the selection of R&D performance measures, and by integrating these aspects to the developed novel types of approaches, methods and tools in the selection processes of R&D measures, applied in real-world organizations. In the whole research, facilitation of dealing with the versatility and challenges in R&D performance analysis, as well as the factors and dimensions influencing the R&D performance measure selection are strongly integrated with the constructed approaches. Thus, the research meets the above-mentioned purposes and objectives of the dissertation from the scientific as well as from the practical point of view.

Measurement systems in wall production applications

Tässä tutkimuksessa kehitettiin prototyyppi betonielementin dimension mittaus järjestelmästä. Tämä järjestelmä mahdollistaa kolmiulotteisen kappaleen mittauksen. Tutkimuksessa kehitettiin myös stereonäköön perustuva kappaleen mittaus. Prototyyppiä testailin ja tulokset osoittautuivat luotettaviksi. Tutkimuksessa selvitetään ja vertaillaan myös muita lähestymistapoja ja olemassa olevia järjestelmiä kappaleen kolmiuloitteiseen mittaukseen, joita Suomalaiset yhtiöt käyttävät tällä alalla.

Flexible Multibody Simulation Approach in the Dynamic Analysis of Bone Strains Activity

The objective of this study is to show that bone strains due to dynamic mechanical loading during physical activity can be analysed using the flexible multibody simulation approach. Strains within the bone tissue play a major role in bone (re)modeling. Based on previous studies, it has been shown that dynamic loading seems to be more important for bone (re)modeling than static loading. The finite element method has been used previously to assess bone strains. However, the finite element method may be limited to static analysis of bone strains due to the expensive computation required for dynamic analysis, especially for a biomechanical system consisting of several bodies. Further, in vivo implementation of strain gauges on the surfaces of bone has been used previously in order to quantify the mechanical loading environment of the skeleton. However, in vivo strain measurement requires invasive methodology, which is challenging and limited to certain regions of superficial bones only, such as the anterior surface of the tibia. In this study, an alternative numerical approach to analyzing in vivo strains, based on the flexible multibody simulation approach, is proposed. In order to investigate the reliability of the proposed approach, three 3-dimensional musculoskeletal models where the right tibia is assumed to be flexible, are used as demonstration examples. The models are employed in a forward dynamics simulation in order to predict the tibial strains during walking on a level exercise. The flexible tibial model is developed using the actual geometry of the subject’s tibia, which is obtained from 3 dimensional reconstruction of Magnetic Resonance Images. Inverse dynamics simulation based on motion capture data obtained from walking at a constant velocity is used to calculate the desired contraction trajectory for each muscle. In the forward dynamics simulation, a proportional derivative servo controller is used to calculate each muscle force required to reproduce the motion, based on the desired muscle contraction trajectory obtained from the inverse dynamics simulation. Experimental measurements are used to verify the models and check the accuracy of the models in replicating the realistic mechanical loading environment measured from the walking test. The predicted strain results by the models show consistency with literature-based in vivo strain measurements. In conclusion, the non-invasive flexible multibody simulation approach may be used as a surrogate for experimental bone strain measurement, and thus be of use in detailed strain estimation of bones in different applications. Consequently, the information obtained from the present approach might be useful in clinical applications, including optimizing implant design and devising exercises to prevent bone fragility, accelerate fracture healing and reduce osteoporotic bone loss.