15 resultados para Delay in payment
em Doria (National Library of Finland DSpace Services) - National Library of Finland, Finland
Resumo:
Tutkimustyön tavoitteena oli selvittää polttonesteiden toimituksiin osallistuvien tahojen, eli myyjän, itsenäisen rahdinkuljettajan ja ostajan vastuun jakautuminen.. Lähtökohtaisesti myyjällä on viivästystilanteissa sekä kuluttaja-, että yritysasiakkaita kohtaan kontrollivastuu välittömistä ja tuottamusperusteinen vastuu välillisistä vahingoista, mutta korvausvelvollisuudesta voidaan vapautua tietyt tunnusmerkit täyttävän esteen perusteella. Virhevastuukin perustuu samanlaiselle kaksinkertaiselle vahinkolajikohtaiselle vastuuperuste-erottelulle, mutta myyjän on aina korvattava kuluttajalle aiheutuneet välittömät vahingot aiheuttamisvastuun perusteella. Lisäksi hän voi joutua hyvittämään kaikki mahdolliset menetyksen annetun erityisen sitoumuksen nojalla. Maksuviivästystilanteissa ostajan molempia vahinkolajeja koskeva vastuuperuste sijoittuu puhtaan aiheuttamis- ja kontrollivastuun väliin. Lainmukaisen myötävaikutusvelvollisuuden laiminlyönnin aiheuttamat vahingot korvataan noudattamalla myyjän viivästysvastuusäännöksiä, mutta tavaran vastaanottamisen tai noutamisen osalta vastuun toteutuminen edellytetään vielä sitä, että kaupankohteen pois toimittamisella on ollut myyjäpuolelle erityistä merkitystä. Kuluttaja-asiakkaalla ei kuitenkaan ole edellä mainittua vastuuta. Rahdinkuljettajalla on tavara- ja viivästysvahingoista ankara vastuu tietyn force majeure poikkeuksin. Tavallisesti korvausvelvollisuus rajoittuu tavaravahinkojen osalta 20 euroon painokiloa kohti ja viivästysvahingot on korvattava rahtia vastaavaan rahamäärään saakka. Kyseinen taho voi myös vapautua vastuusta kokonaan laissa mainittujen vastuuvapausperusteiden nojalla, mutta tahallinen tai törkeän huolimaton toiminta aiheuttaa täyden vahingonkorvausvastuun.
Resumo:
Data transmission between an electric motor and a frequency converter is required in variablespeed electric drives because of sensors installed at the motor. Sensor information can be used for various useful applications to improve the system reliability and its properties. Traditionally, the communication medium is implemented by an additional cabling. However, the costs of the traditional method may be an obstacle to the wider application of data transmission between a motor and a frequency converter. In any case, a power cable is always installed between a motor and a frequency converter for power supply, and hence it may be applied as a communication medium for sensor level data. This thesis considers power line communication (PLC) in inverter-fed motor power cables. The motor cable is studied as a communication channel in the frequency band of 100 kHz−30 MHz. The communication channel and noise characteristics are described. All the individual components included in a variable-speed electric drive are presented in detail. A channel model is developed, and it is verified by measurements. A theoretical channel information capacity analysis is carried out to estimate the opportunities of a communication medium. Suitable communication and forward error correction (FEC) methods are suggested. A general method to implement a broadband and Ethernet-based communication medium between a motor and a frequency converter is proposed. A coupling interface is also developed that allows to install the communication device safely to a three-phase inverter-fed motor power cable. Practical tests are carried out, and the results are analyzed. Possible applications for the proposed method are presented. A speed feedback motor control application is verified in detail by simulations and laboratory tests because of restrictions for the delay in the feedback loop caused by PLC. Other possible applications are discussed at a more general level.
Resumo:
Initially identified as stress activated protein kinases (SAPKs), the c-Jun Nterminal kinases (JNKs) are currently accepted as potent regulators of various physiologically important cellular events. Named after their competence to phosphorylate transcription factor c-Jun in response to UVtreatment, JNKs play a key role in cell proliferation, cell death or cell migration. Interestingly, these functions are crucial for proper brain formation. The family consists of three JNK isoforms, JNK1, JNK2 and JNK3. Unlike brain specific JNK3 isoform, JNK1 and JNK2 are ubiquitously expressed. It is estimated that ten splice variants exist. However, the detailed cellular functions of these remain undetermined. In addition, physiological conditions keep the activities of JNK2 and JNK3 low in comparison with JNK1, whereas cellular stress raises the activity of these isoforms dramatically. Importantly, JNK1 activity is constitutively high in neurons, yet it does not stimulate cell death. This suggests a valuable role for JNK1 in brain development, but also as an important mediator of cell wellbeing. The aim of this thesis was to characterize the functional relationship between JNK1 and SCG10. We found that SCG10 is a bona fide target for JNK. By employing differential centrifugation we showed that SCG10 co-localized with active JNK, MKK7 and JIP1 in a fraction containing endosomes and Golgi vesicles. Investigation of JNK knockout tissues using phosphospecific antibodies recognizing JNK-specific phosphorylation sites on SCG10 (Ser 62/Ser 73) showed that phosphorylation of endogenous SCG10 was dramatically decreased in Jnk1-/- brains. Moreover, we found that JNK and SCG10 co-express during early embryonic days in brain regions that undergo extensive neuronal migration. Our study revealed that selective inhibition of JNK in the cytoplasm significantly increased both the frequency of exit from the multipolar stage and radial migration rate. However, as a consequence, it led to ill-defined cellular organization. Furthermore, we found that multipolar exit and radial migration in Jnk1 deficient mice can be connected to changes in phosphorylation state of SCG10. Also, the expression of a pseudo-phosphorylated mutant form of SCG10, mimicking the JNK1- phopshorylated form, brings migration rate back to normal in Jnk1 knockout mouse embryos. Furthermore, we investigated the role of SCG10 and JNK in regulation of Golgi apparatus (GA) biogenesis and whether pathological JNK action could be discernible by its deregulation. We found that SCG10 maintains GA integrity as with the absence of SCG10 neurons present more compact fragmented GA structure, as shown by the knockdown approach. Interestingly, neurons isolated from Jnk1-/- mice show similar characteristics. Block of ER to GA is believed to be involved in development of Parkinson's disease. Hence, by using a pharmacological approach (Brefeldin A treatment), we showed that GA recovery is delayed upon removal of the drug in Jnk1-/- neurons to an extent similar to the shRNA SCG10-treated cells. Finally, we investigated the role of the JNK1-SCG10 duo in the maintenance of GA biogenesis following excitotoxic insult. Although the GA underwent fragmentation in response to NMDA treatment, we observed a substantial delay in GA disintegration in neurons lacking either JNK1 or SCG10.
Resumo:
The parents of premature infants, especially the mothers, are at increased risk for distress. Infants born prematurely are at risk for developmental problems. The aim of this study was to investigate whether the psychological well-being of both parents is associated with child development in very low birth weight (VLBW, ≤1500g) children. The burden of prematurity-related morbidity to the children and to the family was also assessed. A cohort of 201 VLBW infants born during 2001–2006 in the Turku University Hospital, Finland, and their parents were studied (I–IV). One study included a control group (n=166) of full-term infants (IV). The psychological well-being of the parents was evaluated by assessments of depressive symptoms, parenting stress, the sense of coherence and general family functioning. Cognitive, behavioral, and socio-emotional development, and the health-related quality of life (HRQoL) of the children were determined when the children were 2 to 8 years old. The psychological well-being of the parents was associated with the cognitive, behavioral and social development of the VLBW children. The VLBW infants with prematurity-related morbidities had a poorer HRQoL and the general functioning of the family was inferior compared to the control children and their families. 64.5% of the VLBW children survived without morbidities. Most of the VLBW children did not have significant behavior problems (93%), had normal social skills (63%), had no emotional problems (64%), and had no problems in executive functioning (62%). Only 3% of the surviving VLBW infants had significant cognitive delay. In conclusion, the depressive symptoms and stress of the parents can be risk factors for disadvantageous child development, while a strong sense of coherence can be protective. Parents of the premature children with developmental delays might also experience more depressive symptoms and stress than other parents. Prematurity-related morbidities were a burden to the VLBW child as well as to the family.
Resumo:
Middle ear infections (acute otitis media, AOM) are among the most common infectious diseases in childhood, their incidence being greatest at the age of 6–12 months. Approximately 10–30% of children undergo repetitive periods of AOM, referred to as recurrent acute otitis media (RAOM). Middle ear fluid during an AOM episode causes, on average, 20–30 dB of hearing loss lasting from a few days to as much as a couple of months. It is well known that even a mild permanent hearing loss has an effect on language development but so far there is no consensus regarding the consequences of RAOM on childhood language acquisition. The results of studies on middle ear infections and language development have been partly discrepant and the exact effects of RAOM on the developing central auditory nervous system are as yet unknown. This thesis aims to examine central auditory processing and speech production among 2-year-old children with RAOM. Event-related potentials (ERPs) extracted from electroencephalography can be used to objectively investigate the functioning of the central auditory nervous system. For the first time this thesis has utilized auditory ERPs to study sound encoding and preattentive auditory discrimination of speech stimuli, and neural mechanisms of involuntary auditory attention in children with RAOM. Furthermore, the level of phonological development was studied by investigating the number and the quality of consonants produced by these children. Acquisition of consonant phonemes, which are harder to hear than vowels, is a good indicator of the ability to form accurate memory representations of ambient language and has not been studied previously in Finnish-speaking children with RAOM. The results showed that the cortical sound encoding was intact but the preattentive auditory discrimination of multiple speech sound features was atypical in those children with RAOM. Furthermore, their neural mechanisms of auditory attention differed from those of their peers, thus indicating that children with RAOM are atypically sensitive to novel but meaningless sounds. The children with RAOM also produced fewer consonants than their controls. Noticeably, they had a delay in the acquisition of word-medial consonants and the Finnish phoneme /s/, which is acoustically challenging to perceive compared to the other Finnish phonemes. The findings indicate the immaturity of central auditory processing in the children with RAOM, and this might also emerge in speech production. This thesis also showed that the effects of RAOM on central auditory processing are long-lasting because the children had healthy ears at the time of the study. An effective neural network for speech sound processing is a basic requisite of language acquisition, and RAOM in early childhood should be considered as a risk factor for language development.
Resumo:
Diplomityössä tutkitaan verkkokäyttöisten harjattomasti magnetoitujen tahtimoottorien käynnistyshäiriötä, jossa moottori magnetoituu vasta useiden sekuntien kuluttua magnetoinnin kytkemisestä magnetointilaitteiston normaalista toiminnasta huolimatta. Syy magnetoitumisen viivästymiseen on magnetointikoneen oikosulkeutuminen roottorin ylijännitesuojana toimivan tyristorihaaran kautta siitä huolimatta, että tyristorihaaran tyristorien on tarkoitus olla johtamattomassa tilassa magnetointikoneen alkaessa syöttää magnetointivirtaa. Syitä tyristorien johtavana pysymiseen magnetoinnin kytkennän jälkeen etsitään tahtimoottorin käynnistyskokeista saatujen mittaustulosten sekä SMT- ja FCSMEK-laskentaohjelmilla tehtyjen käynnistyssimulointien avulla. Samalla arvioidaan ohjelmien käyttökelpoisuutta käynnistyshäiriön ennakoimisessa. Diplomityössä esitetään syyt kahden esimerkkikoneen magnetoitumisen viivästymiseen sekä muutoksia roottoripiiriin ja käynnistysproseduuriin, joiden avulla tutkittu käynnistyshäiriö voitaisiin tulevaisuudessa todennäköisesti välttää.
Resumo:
Diplomityön ensisijaisena tavoitteena on kuvata Loviisan ydinvoimalaitoksen hankeprosessi ja kartoittaa siihen liittyvät kehitystarpeet. Erityistä huomiota kiinnitetään arviointi-, suunnittelu- ja hyväksymisvaiheisiin sekä budjetointiin. Työssä käsitellään myös hankkeiden taloudellisten perusteluiden määrittelyä ja hankevaihtoehtojen vertailua sekä esitellään laitoksen budjetointikäytännöt ja etsitään menetelmiä laitoksen kustannusseurannan tehostamiseksi. Oman osuutensa työssä muodostaa uuden Maximo-tietojärjestelmän raportointitarpeiden ideointi. Samassa on esitelty myös uusi projektien hallintajärjestelmä Primavera. Tietojärjestelmäuudistuksen aikataulun myöhästymisen vuoksi järjestelmien kehittely ja ominaisuuksien määrittely on toteutettu suppeasti. Teoriaosuudessa käsitellään ydinvoimalaitoksen käyttöiän hallintaa, jonka tarkoituksena on pohjustaa empiirisessä osuudessa käsiteltävää hankeprosessia ja sen kehitystarpeita. Työn ensisijaisena lähdemateriaalina toimivat hankeprosessiin osallistuvien henkilöiden haastattelut. Työssä esitellään erilaisia päätöksentekoa tukevia ja kannattavuuden arviointiin käytettäviä työkaluja ja menetelmiä. Työssä on myös ideoitu alustavasti hankeprosessin tunnusluvut ja raportointitarpeet, jotka tulisi vaivatta saada poimittua Maximo-järjestelmästä. Työssä kuvattiin prosessikaaviona voimalaitoksen hankeprosessi ja tunnistettiin sen pahimmat pullonkaulat, joiden poistamiseksi esitettiin myös muutamia toimintaehdotuksia. Väärinymmärrysten vähentämiseksi selvennettiin laitoksella toteutettavien töiden käsitteistöä. Työssä esitettyjen kehitystoimenpiteiden avulla saadaan kustannusseurantaa tehostettua sekä investointien budjetointiin lisää ryhtiä. Työ päättyy työn tulosten esittelyyn ja johtopäätöksiin.
Resumo:
Henkilökohtaista luotettavaa päätelaitetta voidaan käyttää maksuvälineenä langattomissa maksujärjestelmissä. Päätelaitteen luotettavuus saadaan aikaan sen sisältämien tietojen salauksen ja käyttäjän tunnistuksen avulla. Kaupankäynnin tietoturvan kannalta järjestelmien tärkeimpiä tehtäviä ovat osapuolten tunnistaminen ja tietoyhteyden suojaaminen. Tässä työssä esitellään automaatti- ja ruokalamaksamisen järjestelmä, jossa käytetään maksuvälineenä Bluetooth-ominaisuudella varustettua kämmentietokonetta. Henkilökohtaisen luotettavan päätelaitteen vaatimuksia ja uhkia käydään läpi. Samoin erilaisia menetelmiä käyttäjän ja laitteiden tunnistukseen sekä tietoyhteyden suojaamiseen. Käyttäjän tunnistus perustuu julkisten avainten varmenteisiin, joihin on sisällytetty tietoa niin asiakkaasta, maksuvälineestä kuin maksumenetelmästäkin. Maksumenetelmäksi on valittu tilien käyttö. Tietoyhteyden suojaamiseen käytetään epäsymmetristä salausta.
Resumo:
Tuotealustapohjaisella suunnittelulla pyritään hyödyntämään jo kertaalleen hyväksi todettuja kokonaisuuksia ja moduuleja, joiden avulla voidaan nopeasti suunnitella uusia tuotteita. Tarkoituksena on suunnitella asiakkaan näkökulmasta monia erilaisia tuotteita jopa sarjatuotannon kustannustehokkuudella. Tutkimuksessa esitetään risteilijän tuotealustapohjainen suunnitteluprosessi. Lisäksi työn tavoitteena on tutkia uuden suunnitteluprosessin vaikutukset risteilijän suunnitteluaikatauluihin. Tutkimuksessa haastateltiin Turun telakan suunnitteluosaston ja kehitysosaston johtajia. Haastatteluilla selvitettiin nykyisen suunnitteluprosessin haasteita, joiden nähtiin erityisesti viivästyttävät suunnitteluaikatauluja. Keskeisiä haasteita ovat suunnitteluresurssien ylikuormitus ja suunnittelulaadun huonontuminen. Lisäksi kartoitettiin tavoitteet risteilijän tuotealustaratkaisulle ja suunnitteluaikataululle. Haastattelukierroksen pohjalta ja teoriaa soveltaen analysoitiin risteilijän modulaariseen tuotealustaan perustuva suunnitteluprosessi. Tätä suunnitteluprosessia tutkittiin edelleen case-tutkimuksessa jääasemien osalta, jossa haastateltiin kyseisten alueiden suunnittelijoita. Lisäksi case-tutkimuksessa verrattiin jääaseman ja baaripentterin perussuunnittelun vaiheita toisiinsa. Näistä saatuja tutkimustuloksia verrattiin hyttialueen vakioidun perussuunnitteluohjeen vaikutuksiin suunnitteluprosessissa. Onnistunut tuotealustapohjainen suunnittelu vaatii sitoutumista jokaisella organisaation tasolla, jotta tuotealustassa olevien vakioituja moduuleja myös käytettäisiin. Modulaarisesta toiminnasta siirtyminen tuotealustapohjaiseen suunnitteluun vaatii vakioituja moduuleja ja vakioituja rajapintoja risteilijässä. Case-tutkimuksessa ja johtopäätöksissä on todettu uuden suunnitteluprosessin lyhentävän ja tuovan kustannussäästöjä tuotteen valmistusprosessissa.
Resumo:
Preterm birth is a risk for normal brain development. Brain maturation that normally happens in the uterus is in very preterm infants a developmental challenge during their stay in a neonatal intensive care unit (NICU). Typical brain injuries of preterm infants include ischemic injuries, brain haemorrhages, ventricular dilatation (VD), and reduced brain volumes. Brain injury is a serious complication of prematurity leading to possible long term consequences for the neurodevelopment of the very low birth weight (VLBW) infant, such as cerebral palsy (CP), hearing impairments, vision problems, and delay in cognitive development.There is a need for further studies to ascertain the potential risk factors and their causal relationships to brain vulnerability, growth and development in the increasing number of surviving VLBW infants. This thesis consists of four studies evaluating the definitions, causes and consequences of brain lesions in VLBW(<1500g) or very low gestationalage (VLGA) (gestational age <32 gestational weeks) infants. We showed that the redistribution of fetal blood flow is a risk factor for smaller brain volumes at term. In addition,we showed that brain lesions related to prematurity are not associated with increased spontaneous crying behaviour or circadian rhythm development in infancy. However, the preterm infants began to fuss more often and were held more than term infants at five months of age. Furthermore, we showed that VD is associated with brain lesions and smaller brain volumes. Therefore, brain magneticresonance imaging can be recommended for infants with VD. VD together with other brain pathology is a risk factor for the onset of developmental impairments in VLBW/VLGA infants at two years of age.
Resumo:
The environmental impacts of a single mine often remain local, but acidic and metal-rich acid mine drainage (AMD) from the waste materials may pose a serious threat to adjacent surface waters and their ecosystems. Testate amoebae (thecamoebian) analysis was used together with lake sediment geochemistry to study and evaluate the ecological effects of sulphidic metal mines on aquatic environments. Three different mines were included in the study: Luikonlahti Cu-mine in Kaavi, eastern Finland, Haveri Cu-Au mine in Ylöjärvi, southern Finland and Pyhäsalmi Zn-Cu-S mine in Pyhäjärvi, central Finland. Luikonlahti and Haveri are closed mines, but Pyhäsalmi is still operating. The sampling strategy was case specific, and planned to provide a representative sediment sample series to define natural background conditions, to detect spatial and temporal variations in mine impacts, to evaluate the possible recovery after the peak contamination, and to distinguish the effects of other environmental factors from the mining impacts. In the Haveri case, diatom analyses were performed alongside thecamoebian analysis to evaluate the similarities and differences between the two proxies. The results of the analyses were investigated with multivariate methods (direct and indirect ordinations, diversity and distance measure indices). Finally, the results of each case study were harmonized, pooled, and jointly analyzed to summarize the results for this dissertation. Geochemical results showed broadly similar temporal patterns in each case. Concentrations of ions in the pre-disturbance samples defined the natural baseline against which other results were compared. The beginning of the mining activities had only minor impacts on sediment geochemistry, mainly appearing as an increased clastic input into the lakes at Haveri and Pyhäsalmi. The active mining phase was followed by the metallic contamination and, subsequently, by the most recent change towards decreased but still elevated metal concentrations in the sediments. Because of the delay in the oxidation of waste material and formation of AMD, the most intense, but transient metal contamination phase occurred in the post-mining period at Luikonlahti and Haveri. At Pyhäsalmi, the highest metal contamination preceded effluent mitigation actions. Spatial gradients were observed besides the temporal evolution in both the pre-disturbance and mine-impacted samples from Luikonlahti and Pyhäsalmi. The geochemical gradients varied with distance from the main source of contaminants (dispersion and dilution) and with water depth (redox and pH). The spatial extent of the highest metal contamination associated with these mines remained rather limited. At Haveri, the metallic impact was widespread, with the upstream site in another lake basin found to be contaminated. Changes in thecamoebian assemblages corresponded well with the geochemical results. Despite some differences, the general features and ecological responses of the faunal assemblages were rather similar in each lake. Constantly abundant strains of Difflugia oblonga, Difflugia protaeiformis and centropyxids formed the core of these assemblages. Increasing proportions of Cucurbitella tricuspis towards the surface samples were found in all of the cases. The results affirmed the indicator value of some already known indicator forms, but such as C. tricuspis and higher nutrient levels, but also elicited possible new ones such as D. oblonga ‘spinosa’ and clayey substrate, high conductivity and/or alkalinity, D. protaeiformis ‘multicornis’ and pH, water hardness and the amount of clastic material and Centropyxis constricta ‘aerophila’ and high metal and S concentrations. In each case, eutrophication appeared to be the most important environmental factor, masking the effects of other variables. Faunal responses to high metal inputs in sediments remained minor, but were nevertheless detectable. Besides the trophic state of the lake, numerical methods suggested overall geochemical conditions (pH, redox) to be the most important factor at Luikonlahti, whereas the Haveri results showed the clearest connection between metals and amoebae. At Pyhäsalmi, the strongest relationships were found between Ca- and S-rich present loading, redox conditions and substrate composition. Sediment geochemistry and testate amoeba analysis proved to be a suitable combination of methods to detect and describe the aquatic mine impacts in each specific case, to evaluate recovery and to differentiate between the effects of different anthropogenic and natural environmental factors. It was also suggested that aquatic mine impacts can be significantly mitigated by careful design and after-care of the waste facilities, especially by reducing and preventing AMD. The case-specific approach is nevertheless necessary because of the unique characteristics of each mine and variations in the environmental background conditions.
Resumo:
This thesis studies the possibility of using information on insiders’ transactions to forecast future stock returns after the implementation of Sarbanes Oxley Act in July 2003. Insider transactions between July 2003 and August 2009 are analysed with regression tests to identify the relationships between insiders’ transactions and future stock returns. This analysis is complemented with rudimentary bootstrapping procedures to verify the robustness of the findings. The underlying assumption of the thesis is that insiders constantly receive pieces of information that indicate future performance of the company. They may not be allowed to trade on large and tangible pieces of information but they can trade on accumulation of smaller, intangible pieces of information. Based on the analysis in the thesis insiders’ profits were found not to differ from the returns from broad stock index. However, their individual transactions were found to be linked to future stock returns. The initial model was found to be unstable but some of the predictive power could be sacrificed to achieve greater stability. Even after sacrificing some predictive power the relationship was significant enough to allow external investors to achieve abnormal profits after transaction costs and taxes. The thesis does not go into great detail about timing of transactions. Delay in publishing insiders’ transactions is not taken into account in the calculations and the closed windows are not studied in detail. The potential effects of these phenomena are looked into and they do not cause great changes in the findings. Additionally the remuneration policy of an insider or a company is not taken into account even though it most likely affects the trading patterns of insiders. Even with the limitations the findings offer promising opportunities for investors to improve their investment processes by incorporating additional information from insiders’ transaction into their decisions. The findings also raise questions on how insider trading should be regulated. Insiders achieve greater returns than other investors based on superior information. On the other hand, more efficient information transfer could warrant more lenient regulation. The fact that insiders’ returns are dominated by the large investment stake they maintain all the time in their own companies also speaks for more leniency. As Sarbanes Oxley Act considerably modified the insider trading landscape, this analysis provides information that has not been available before. The thesis also constitutes a thorough analysis of insider trading phenomenon which has previously been somewhat separated into several studies.
Resumo:
University of Turku, Faculty of Medicine, Department of Cardiology and Cardiovascular Medicine, Doctoral Programme of Clinical Investigation, Heart Center, Turku University Hospital, Turku, Finland Division of Internal Medicine, Department of Cardiology, Seinäjoki Central Hospital, Seinäjoki, Finland Heart Center, Satakunta Central Hospital, Pori, Finland Annales Universitatis Turkuensis Painosalama Oy, Turku, Finland 2015 Antithrombotic therapy during and after coronary procedures always entails the challenging establishment of a balance between bleeding and thrombotic complications. It has been generally recommended to patients on long-term warfarin therapy to discontinue warfarin a few days prior to elective coronary angiography or intervention to prevent bleeding complications. Bridging therapy with heparin is recommended for patients at an increased risk of thromboembolism who require the interruption of anticoagulation for elective surgery or an invasive procedure. In study I, consecutive patients on warfarin therapy referred for diagnostic coronary angiography were compared to control patients with a similar disease presentation without warfarin. The strategy of performing coronary angiography during uninterrupted therapeutic warfarin anticoagulation appeared to be a relatively safe alternative to bridging therapy, if the international normalized ratio level was not on a supratherapeutic level. In-stent restenosis remains an important reason for failure of long-term success after a percutaneous coronary intervention (PCI). Drug-eluting stents (DES) reduce the problem of restenosis inherent to bare metal stents (BMS). However, a longer delay in arterial healing may extend the risk of stent thrombosis (ST) far beyond 30 days after the DES implantation. Early discontinuation of antiplatelet therapy has been the most important predisposing factor for ST. In study II, patients on long-term oral anticoagulant (OAC) underwent DES or BMS stenting with a median of 3.5 years’follow-up. The selective use of DESs with a short triple therapy seemed to be safe in OAC patients, since late STs were rare even without long clopidogrel treatment. Major bleeding and cardiac events were common in this patient group irrespective of stent type. In order to help to predict the bleeding risk in patients on OAC, several different bleeding risk scorings have been developed. Risk scoring systems have also been used also in the setting of patients undergoing a PCI. In study III, the predictive value of an outpatient bleeding risk index (OBRI) to identify patients at high risk of bleeding was analysed. The bleeding risk seemed not to modify periprocedural or long-term treatment choices in patients on OAC after a percutaneous coronary intervention. Patients with a high OBRI often had major bleeding episodes, and the OBRI may be suitable for risk evaluation in this patient group. Optical coherence tomography (OCT) is a novel technology for imaging intravascular coronary arteries. OCT is a light-based imaging modality that enables a 12–18 µm tissue axial resolution to visualize plaques in the vessel, possible dissections and thrombi as well as, stent strut appositions and coverage, and to measure the vessel lumen and lesions. In study IV, 30 days after titanium-nitride-oxide (TITANOX)-coated stent implantation, the binary stent strut coverage was satisfactory and the prevalence of malapposed struts was low as evaluated by OCT. Long-term clinical events in patients treated with (TITANOX)-coated bio-active stents (BAS) and paclitaxel-eluting stents (PES) in routine clinical practice were examined in study V. At the 3-year follow-up, BAS resulted in better long-term outcome when compared with PES with an infrequent need for target vessel revascularization. Keywords: anticoagulation, restenosis, thrombosis, bleeding, optical coherence tomography, titanium
Resumo:
Delays in the justice system have been undermining the functioning and performance of the court system all over the world for decades. Despite the widespread concern about delays, the solutions have not kept up with the growth of the problem. The delay problem existing in the justice courts processes is a good example of the growing need and pressure in professional public organizations to start improving their business process performance.This study analyses the possibilities and challenges of process improvement in professional public organizations. The study is based on experiences gained in two longitudinal action research improvement projects conducted in two separate Finnish law instances; in the Helsinki Court of Appeal and in the Insurance Court. The thesis has two objectives. First objective is to study what kinds of factors in court system operations cause delays and unmanageable backlogs and how to reduce and prevent delays. Based on the lessons learned from the case projects the objective is to give new insights on the critical factors of process improvement conducted in professional public organizations. Four main areas and factors behind the delay problem is identified: 1) goal setting and performance measurement practices, 2) the process control system, 3) production and capacity planning procedures, and 4) process roles and responsibilities. The appropriate improvement solutions include tools to enhance project planning and scheduling and monitoring the agreed time-frames for different phases of the handling process and pending inventory. The study introduces the identified critical factors in different phases of process improvement work carried out in professional public organizations, the ways the critical factors can be incorporated to the different stages of the projects, and discusses the role of external facilitator in assisting process improvement work and in enhancing ownership towards the solutions and improvement. The study highlights the need to concentrate on the critical factors aiming to get the employees to challenge their existing ways of conducting work, analyze their own processes, and create procedures for diffusing the process improvement culture instead of merely concentrating of finding tools, techniques, and solutions appropriate for applications from the manufacturing sector