Trigger and data link system for CMS Resistive Plate Chambers at the LHC accelerator

The purpose of the work was to realize a high-speed digital data transfer system for RPC muon chambers in the CMS experiment on CERN’s new LHC accelerator. This large scale system took many years and many stages of prototyping to develop, and required the participation of tens of people. The system interfaces to Frontend Boards (FEB) at the 200,000-channel detector and to the trigger and readout electronics in the control room of the experiment. The distance between these two is about 80 metres and the speed required for the optic links was pushing the limits of available technology when the project was started. Here, as in many other aspects of the design, it was assumed that the features of readily available commercial components would develop in the course of the design work, just as they did. By choosing a high speed it was possible to multiplex the data from some the chambers into the same fibres to reduce the number of links needed. Further reduction was achieved by employing zero suppression and data compression, and a total of only 660 optical links were needed. Another requirement, which conflicted somewhat with choosing the components a late as possible was that the design needed to be radiation tolerant to an ionizing dose of 100 Gy and to a have a moderate tolerance to Single Event Effects (SEEs). This required some radiation test campaigns, and eventually led to ASICs being chosen for some of the critical parts. The system was made to be as reconfigurable as possible. The reconfiguration needs to be done from a distance as the electronics is not accessible except for some short and rare service breaks once the accelerator starts running. Therefore reconfigurable logic is extensively used, and the firmware development for the FPGAs constituted a sizable part of the work. Some special techniques needed to be used there too, to achieve the required radiation tolerance. The system has been demonstrated to work in several laboratory and beam tests, and now we are waiting to see it in action when the LHC will start running in the autumn 2008.

Kaasupoljinohjeen toteuttaminen hybridilinja-auton säätöjärjestelmälle

Sähkö- ja hybridiajoneuvot yleistyvät tiukentuvien päästömääräysten seurauksena, koska sähkömoottoritekniikan avulla ajoneuvon kokonaishyötysuhdetta on mahdollista parantaa merkittävästi. Akkujen kapasiteettiin, kokoon, painoon ja latausaikoihin liittyvien ongelmien vuoksi sekä nestemäistä polttoainetta että sähköä hyödyntävä hybriditekniikka on toistaiseksi pelkkään sähkökäyttöön verrattuna usein toimivampi toteutus. Vanhojen hyötyajoneuvojen hybridikonversiot saattavatkin yleistyä, jos voidaan osoittaa, että konversio on toteutettavissa järkevin resurssein ja voidaan laatia konversion teknisiä haasteita helpottavia ohjeita. Syksyllä 2012 käynnistyi Lappeenrannan Teknillisen Yliopiston vetämä CAMBUS-projekti, jossa on tarkoitus kehittää kaupallisesti tarjolla olevia järjestelmiä pätevämpi hybriditekniikka linja-autokäyttöön. Tämä kandidaatintyö pyrkii kirjallisuuskatsauksen keinoin selvittämään, minkälainen kaasupolkimen toteutus olisi tätä hybridikonversiota ajatellen paras kuljettajan kontrolloiman säätöohjeen käytännön toteutukseen. Lähdemateriaalina on käytetty mm. Boschin ja Automobiltechnische Zeitschriftin ajoneuvoalan käsikirjoja ja oppikirjoja, Volkswagenin koulutuskäsikirjoja ja täydentävästi tieteellisiä artikkeleita ja patentteja. Niiden pohjalta on koottu yleisimmät tämänhetkiset tekniset toteutustavat, pohdittu tiedonsiirron ja sähkömagneettisen yhteensopivuuden haasteita, sekä kokonaissäätöjärjestelmän näkökulmasta säätöohjeen suuretta. Selvityksen perusteella polkimen asentotunnistuksen kannalta oleellista on turvallisuus, eli lähinnä mekaaninen kestävyys ja riittävä häiriösuojaus. Ajoneuvossa ilmeneviä voimakkaita magneettikenttiä hyvin sietävä digitaalinen väyläjärjestelmä voi hyvin toteutettuna myös yksinkertaistaa ajoneuvon sähköjärjestelmän muuta toteutusta. Aineistojen perusteella vääntömomentti on luonnollisin valinta ohjaussuureeksi. Vääntömomenttiohjeen avulla voidaan helposti luoda selkeä ja johdonmukainen tuntuma kuljettajalle voimanlähteiden turvalliseen hallintaan ja se helpottaa myös kommunikointia pidonhallintajärjestelmän ja muiden ajoneuvon hallintaan liittyvien järjestelmien kanssa.

Audio and Video Repositories at Scale: Indiana University’s Media Digitization and Preservation Initiative

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Save Consumers Time and Money: Thou Shall Not Forget Digital Native Big Data Consumers

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Targeted Annotation of Scientific Literature and Data Resources in Invenio Digital Libraries

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Effect of data acquisition accuracy on timing of stand harvests and expected net present value

Abstract

GPS-signal Source Based on Direct Digital Synthesis

This thesis presents the design and implementation of a GPS-signal source suitable for receiver measurements. The developed signal source is based on direct digital synthesis which generates the intermediate frequency. The intermediate frequency is transfered to the final frequency with the aid of an Inphase/Quadrature modulator. The modulating GPS-data was generated with MATLAB. The signal source was duplicated to form a multi channel source. It was shown that, GPS-signals ment for civil navigation are easy to generate in the laboratory. The hardware does not need to be technically advanced if navigation with high level of accuracy is not needed. It was also shown that, the Inphase/Quadrature modulator can function as a single side band upconverter even with a high intermediate frequency. This concept reduces the demands required for output filtering.

Digital Audio Broadcasting: Technology and Prospects

The subject of the thesis was the digital audio broadcasting technology developed in the Eureka project 147. The research was based on the literature on the subject. At first, some reasons for the digitisation of broadcasting technology were given. Next, the channel multiplexing and channel coding methods employed by digital radio were discussed. The design of these methods is based on certain phenomena related to the propagation of radio-frequency signals, and these phenomena were also described. After that, audio and data transfer mechanisms as well as the structure of digital radio network were explained. Furthermore, digital audio and data services were considered. Finally, the digital radio was examined from marketing and administrative aspects. From a merely technical point of view, the digital radio technology offers several improvements in comparison with analogue technology. However, the digital radio has not become as widespread as it was perhaps originally expected during its development.

Factors Affecting Consumer’s Illicit Purchase of Copyrighted Digital Work

Peer-to-Peer (P2P) technology has revolutionized file exchange activities besides enhancing processing power distribution. As such, this technology which is nowadays made freely available to all internet users also imposes a threat as it enables the illegal distribution of copyrighted digital work. P2P technology continuously evolves in a greater pace than copyright legislation, leading to compatibility gaps between the applicability of copyright law and the illicit file sharing and downloading. Such issues give high incentives to consumers to practise piracy using P2P systems with a low perception of risk towards prosecution, leading to substantial losses for copyright owners. This study focuses on developing insights for content owners on consumer behaviour towards piracy in Finland, where quantitative analyses are assessed using a data set based on a survey conducted by the Helsinki Institute for IT. The research approach investigates the significance of three fundamental areas in relation to evaluate consumer behaviour as: environmental-related factors, innovation-related factors and consumer-related. each of these are integrates concepts derived in previous theoretical models such as the technology acceptance model, theory of reasoned action, theory of planned behaviour, the issue-risk-judgement model and the Hunt & Vitell’s model.

DIGITAL BUSINESS-TO-BUSINESS MARKETING COMMUNICATIONS IN EMERGING MARKETS – Developing Business Marketing in Russia

The core idea of this Master's Thesis was that five key characteristics – market heterogeneity, sociopolitical governance, chronic shortage of resources, unbranded competition, and inadequate infrastructure – of emerging markets are radically different from the traditional industrialized capitalist society and they will require us to rethink the core assumptions of business-to-business marketing, such as business relationships, marketing communication elements, and digitalization. In this research, Russia is considered to be an emerging market that reflects the aforementioned theoretical characteristics. The research was a qualitative case study and furthermore a collective case study. In the beginning three digital marketing professionals were interviewed to better understand digital B2B marketing. The actual research data was collected through seven structured theme interviews with representatives of the case companies operating in Russia. The selection of case companies included three business consulting companies and four industrial companies. The aim of this qualitative study was to understand and clarify how business marketing exploits digital marketing methods as a part of the chosen business marketing strategy under emerging markets’ special conditions. This objective was divided in three research questions: 1) How the chosen marketing strategy reflects in the business marketing process? 2) How digital marketing communication contributes to business marketing? 3) How are the emerging markets’ characteristics reflected in the business marketing process? The main research findings indicate that digital business-to-business marketing communications can be useful and effective. Moreover, business DMC can be defined and structured in a reasonable way. The company's prevalent marketing paradigm and the chosen marketing strategy reflect in the business marketing process, and in utilizing digital marketing communications. The assumption that emerging markets set an environment with special characteristics for business marketing was supported by the study. However, the business environmental aspects were not considerably disturbing digital B2B marketing, but making it even more reasonable to harness in Russia.

It’s a workflow engine. It’s working with linked data. It’s repository! – Supporting electronic thesis related processes in University of Helsinki library

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

An Open Source, DDI-based Curation System for Social Science Data

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Virtual Cellar of the Estonian Literary Museum: the Challenges of the Open Access in the Digital Era

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Using ArchivesSpace to Support Research Data Curation

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014