Yrityksen sijaintipaikkapäätökseen vaikuttavat tekijät ja alueiden kilpailukyky Suomessa

Tämän diplomityön tavoite on luoda viitekehys kahdesta työn pääteorioista, jotka ovat: "liiketoiminnan ulkoiset menestystekijät" ja "alueiden kilpailukyky". Kummatkin teoriat sisältävät tekijöitä, joilla on vaikutusta yrityksen sijaintipaikkapäätökseen. Viitekehyksen pohjalta tarkastellaan kahta tutkimusaluetta: Landen seutua ja Kuuma-aluetta. Työn tuloksena syntyy kuva kummastakin tutkimusalueesta ja analyysi viitekehyksestä. Työn ensimmäisessä osassa käydään läpi aihealueen tutkimuksen taustaa ja mitä ongelmia tutkimuksissa on tullut esille. Senjälkeen esitellään kaikki liiketoiminnan ulkoiset menestystekijät. Alueiden kilpailukyvyn teoriaosuus täydentää viitekehyksen tekijät. Työn jälkimmäinen empiirinen osa perustuu lähdemateriaaliin, joka on kerätty haastatteluista, lehtiartikkeleista ja seminaareista koskien tutkimusalueita. Tutkimustuloksista selviää, että kummatkin tutkimusalueet ovat erilaisia ja niillä on omat avainklusterinsa ja menestyvät toimialansa. Viitekehys luotiin melko onnistuneesti. Lopulta selvisi, että se sopii hyvin aihealueen tutkimuksen laajentamiseen, mutta heikosti yksittäisenyrityksen sijaintipaikkapäätökseen.

Capturing Weak Signals for Foresight Building

Tulevaisuuden hahmottamisen merkitys heikkojen signaalien avulla on korostunut viime vuosien aikana merkittävästi,koska yrityksen liiketoimintaympäristössä tapahtuvia muutoksia on ollut yhä vaikeampaa ennustaa historian perusteella. Liiketoimintaympäristössä monien muutoksien merkkejä on ollut nähtävissä, mutta niitä on ollut vaikea havaita. Heikkoja signaaleja tunnistamalla ja keräämällä sekä reagoimalla tilanteeseen riittävän ajoissa, on mahdollista saavuttaa ylivoimaista kilpailuetua. Kirjallisuustutkimus keskittyy heikkojen signaalien tunnistamisen haasteisiin liiketoimintaympäristöstä, signaalien ja informaation kehittymiseen sekä informaation hallintaan organisaatiossa. Kiinnostus näihin perustuu tarpeeseen määritellä heikkojen signaalien tunnistamiseen vaadittava prosessi, jonka avulla heikot signaalit voidaan huomioida M-real Oyj:n päätöksenteossa. Kirjallisuustutkimus osoittaa selvästi sen, että heikkoja signaaleita on olemassa ja niitä pystytään tunnistamaan liiketoimintaympäristöstä. Signaaleja voidaan rikastuttaa yrityksessä olevalla tietämyksellä ja hyödyntää edelleen päätöksenteossa. Vertailtaessa sekä kirjallisuustutkimusta että empiiristä tutkimusta tuli ilmi selkeästi tiedon moninaisuus; määrä,laatu ja tiedonsaannin oikea-aikaisuus päätöksenteossa. Tutkimuksen aikana kehittyi prosessimalli tiedon suodattamiselle, luokittelulle ja heikkojen signaalien tunnistamiselle. Työn edetessä prosessimalli kehittyi osaksi tässä työssä kehitettyä kokonaisuutta 'Weak Signal Capturing' -työkalua. Monistamalla työkalua voidaan kerätä heikkoja signaaleja eri M-realin liiketoiminnan osa-alueilta. Tietoja systemaattisesti kokoamalla voidaan kartoittaa tulevaisuutta koko M-realille.

Putkilämmönsiirtimien mitoitustyökalujen kehittäminen

Diplomityön tarkoituksena on kehittää tietokoneohjelma putkilämmönsiirtimen vaippapuolen painehäviön laskemiseksi. Ohjelmalla voidaan varmistaa lämmönsiirtimen mitoitusvaiheessa, että vaippapuolen painehäviö ei ylitä sallittuja rajoja. Ohjelmatäydentää olemassa olevia mitoitusohjelmia. Tässä diplomityössä käsitellään ainoastaan höyryvoimalaitosprosesseissa käytettäviä putkilämmönsiirtimiä. Työn kirjallisessa osassa on selvitetty periaate höyryvoimalaitosprosessista ja siinä käytettävistä putkilämmönsiirtimistä sekä esitetty putkilämmönsiirtimien rakenne, yleinen suunnittelu ja lämpö- ja virtaustekninen mitoitus. Painehäviön laskennassa käytetyt ja lämpö- ja virtausteknistä mitoitusta käsittelevässä kappaleessa esitetyt yhtälöt perustuvat Bell-Delawaren menetelmään. Painehäviönlaskentaohjelma on toteutettu hyväksikäyttäen Microsoft Excel taulukkolaskentaa ja Visual Basic -ohjelmointikieltä. Painehäviön laskenta perustuu segmenttivälilevyillä varustetun putkilämmönsiirtimen vaippapuolen yksifaasivirtaukseen. Lämmönsiirtimen lauhdutinosan painehäviö oletetaan merkityksettömäksi, joten kokonaispainehäviö muodostuu höyryn- ja lauhteenjäähdyttimessä. Kehitetty ohjelma on suunniteltu erityisesti lauhteenjäähdyttimessä muodostuvan painehäviön laskentaan. Ohjelmalla laskettuja painehäviön arvoja on verrattu todellisesta lämmönsiirtimestä mitattuihin arvoihin. Lasketut arvotvastaavat hyvin mittaamalla saatuja, eikä tuloksissa ilmene mitään systemaattista virhettä. Ohjelma on valmis käytettäväksi putkilämmönsiirtimien mitoitustyökaluna. Diplomityön pohjalta on tehty ehdotukset ohjelman edelleen kehittämiseksi.

MANAGING STRATEGIC CHANGE:New Business Models Applying Wireless Technology as a Source of Competitive Edge

The diffusion of mobile telephony began in 1971 in Finland, when the first car phones, called ARP1 were taken to use. Technologies changed from ARP to NMT and later to GSM. The main application of the technology, however, was voice transfer. The birth of the Internet created an open public data network and easy access to other types of computer-based services over networks. Telephones had been used as modems, but the development of the cellular technologies enabled automatic access from mobile phones to Internet. Also other wireless technologies, for instance Wireless LANs, were also introduced. Telephony had developed from analog to digital in fixed networks and allowed easy integration of fixed and mobile networks. This development opened a completely new functionality to computers and mobile phones. It also initiated the merger of the information technology (IT) and telecommunication (TC) industries. Despite the arising opportunity for firms' new competition the applications based on the new functionality were rare. Furthermore, technology development combined with innovation can be disruptive to industries. This research focuses on the new technology's impact on competition in the ICT industry through understanding the strategic needs and alternative futures of the industry's customers. The change speed inthe ICT industry is high and therefore it was valuable to integrate the DynamicCapability view of the firm in this research. Dynamic capabilities are an application of the Resource-Based View (RBV) of the firm. As is stated in the literature, strategic positioning complements RBV. This theoretical framework leads theresearch to focus on three areas: customer strategic innovation and business model development, external future analysis, and process development combining these two. The theoretical contribution of the research is in the development of methodology integrating theories of the RBV, dynamic capabilities and strategic positioning. The research approach has been constructive due to the actual managerial problems initiating the study. The requirement for iterative and innovative progress in the research supported the chosen research approach. The study applies known methods in product development, for instance, innovation process in theGroup Decision Support Systems (GDSS) laboratory and Quality Function Deployment (QFD), and combines them with known strategy analysis tools like industry analysis and scenario method. As the main result, the thesis presents the strategic innovation process, where new business concepts are used to describe the alternative resource configurations and scenarios as alternative competitive environments, which can be a new way for firms to achieve competitive advantage in high-velocity markets. In addition to the strategic innovation process as a result, thestudy has also resulted in approximately 250 new innovations for the participating firms, reduced technology uncertainty and helped strategic infrastructural decisions in the firms, and produced a knowledge-bank including data from 43 ICT and 19 paper industry firms between the years 1999 - 2004. The methods presentedin this research are also applicable to other industries.

Metsäsektorin kehityksen vaikutus raaka-ainetarpeeseen ja rakenteeseen

Tutkimuksen tavoitteena on selvittää kuinka raakapuumarkkinat muodostuvat ja mitkä tekijät vaikuttavat raakapuun tarjontaan ja hankintaan. Lisäksi tarkastellaan onko tuontipuu korvaava vai täydentävä raaka-aine ja millainen rooli valtiovallalla on luodessaan yrityksille toimintaympäristöä. Työ on voimakkaasti teoreettispainotteinen. Teorian tarkoituksena on esittää se tieteellinen perusta, jolle raakapuumarkkinat sijoittuvat. Lisäksi on hyväksikäytetty aiemmin tehtyjä tutkimuksia, joiden tarkoituksena on valaista asiaa hieman käytännönläheisemmin. Työn tuloksena saadaan vastaukset tutkimuksen tavoitteisiin. Tulosten perusteella on ilmeistä, että keskeisin tarjontaan vaikuttava tekijä on puun hinta ja etenkin siihen liittyvät hintaodotukset. Kysyntään on puolestaan vaikuttanut teollisuuden kapasiteetin kehitys, tuotteiden menekki ja tuontipuun saatavuus. Tuotu koivukuitu on pikemminkin täydentänyt kuin korvannut kotimaan koivukuitua teollisuuden puun hankinnassa. Tuotu mäntykuitu toimii korvaavana tuotteena, mutta kuusikuidun kohdalla kotimaan hinnalla ei ole vaikutusta tuonnin määrään, ainoastaan tuontipuun omalla hinnalla näyttää olevan vaikutus tuontimäärään.

Hankintalain mukaiset yhteistyömahdollisuudet korkeakoulujen kanssa– case Liikennevirasto

The aim of this Master’s thesis is to examine the Finnish Transport Agency's cooperation possibilities with learning institutions. This thesis complements earlier studies made by the Finnish Transport Agency. The sources used in this research are law literature and earlier studies made by the Finnish Transport Agency. The contribution of the study is to present how to organize the cooperation rationally and legally. The study also assesses how cooperation can support the Finnish Transport Agency's strategy.

Analysis on firm innovation boundaries

Innovation has been widely recognized as an important driver of firm competitiveness, and the firm’s internal research and development (R&D) activities are often considered to have a critical role in innovation activities. Internal R&D is, however, not the source of innovation as firms may tap into knowledge necessary for innovation also through various types of sourcing agreements or by collaborating with other organizations. The objective of this study is to analyze the way firms go about organizing efficiently their innovation boundaries. Within this context, the analysis is focused, firstly, on the relation between innovation boundaries and firm innovation performance and, secondly, on the factors explaining innovation boundary organization. The innovation literature recognizes that the sources of innovation depend on the nature of technology but does not offer a sufficient tool for analyzing innovation boundary options and their efficiency. Thus, this study suggests incorporating insights from transaction cost economics (TCE) complemented with dynamic governance costs and benefits into the analysis. The thesis consists of two parts. The first part introduces the background of the study, research objectives, an overview of the empirical studies, and the general conclusions of the study. The second part is formed of five publications. The overall results firstly indicate that although the relation between firm innovation boundary options is partly industry sector-specific, the firm level search strategies and knowledge transfer capabilities are important for innovation performance independently of the sector. Secondly, the results show that the attributes suggested by TCE alone do not offer a sufficient explanation of innovation boundary selection, especially under conditions of high levels of (radical) uncertainty. Based on the results, the dynamic governance cost and benefit framework complements the static TCE when firm innovation boundaries are scrutinized.

Socially Competent Leadership - predictors, impacts and skilling in engineering

Earlier management studies have found a relationship between managerial qualities and subordinate impacts, but the effect of managers‘ social competence on leader perceptions has not been solidly established. To fill the related research gap, the present work embarks on a quantitative empirical effort to identify predictors of successful leadership. In particular, this study investigates relationships between perceived leader behavior and three selfreport instruments used to measure managerial capability: 1) the WOPI Work Personality Inventory, 2) Raven‘s general intelligence scale, and 3) the Emotive Communication Scale (ECS). This work complements previous research by resorting to both self-reports and other-reports: the results acquired from the managerial sample are compared to subordinate perceptions as measured through the ECS other-report and the WOPI360 multi-source appraisal. The quantitative research is comprised of a sample of 8o superiors and 354 subordinates operating in eight Finnish organizations. The strongest predictive value emerged from the ECS self- and other-reports and certain personality dimensions. In contrast, supervisors‘ logical intelligence did not correlate with leadership perceived as socially competent by subordinates. 16 of the superiors rated as most socially competent by their subordinates were selected for case analysis. Their qualitative narratives evidence the role of life history and post-traumatic growth in developing managerial skills. The results contribute to leadership theory in four ways. First, the ECS self-report devised for this research offers a reliable scale for predicting socially competent leader ability. Second, the work identifies dimensions of personality and emotive skills that can be considered predictors of managerial ability and benefited from in leader recruitment and career planning. Third, the Emotive Communication Model delineated on the basis of the empirical data allows for a systematic design and planning of communication and leadership education. Fourth, this workfurthers understanding of personal growth strategies and the role of life history in leader development and training. Finally, this research advances educational leadership by conceptualizing and operationalizing effective managerial communications. The Emotive Communication Model devised directs the pedagogic attention in engineering to assertion, emotional availability and inspiration skills. The proposed methodology addresses classroom management strategies drawing from problem-based learning, student empowerment, collaborative learning, and so-called socially competent teachership founded on teacher immediacy and perceived caring, all constituting strategies moving away from student compliance and teacher modelling. The ultimate educational objective embraces the development of individual engineers and organizational leaders that not only possess traditional analytical and technical expertise and substantive knowledge but are intelligent also creatively, practically, and socially.

Liquid transportation and distribution during (re)wetting : impact on coated papers in printing

In many industrial applications, such as the printing and coatings industry, wetting of porous materials by liquids includes not only imbibition and permeation into the bulk but also surface spreading and evaporation. By understanding these phenomena, valuable information can be obtained for improved process control, runnability and printability, in which liquid penetration and subsequent drying play important quality and economic roles. Knowledge of the position of the wetting front and the distribution/degree of pore filling within the structure is crucial in describing the transport phenomena involved. Although exemplifying paper as a porous medium in this work, the generalisation to dynamic liquid transfer onto a surface, including permeation and imbibition into porous media, is of importance to many industrial and naturally occurring environmental processes. This thesis explains the phenomena in the field of heatset web offset printing but the content and the analyses are applicable in many other printing methods and also other technologies where water/moisture monitoring is crucial in order to have a stable process and achieve high quality end products. The use of near-infrared technology to study the water and moisture response of porous pigmented structures is presented. The use of sensitive surface chemical and structural analysis, as well as the internal structure investigation of a porous structure, to inspect liquid wetting and distribution, complements the information obtained by spectroscopic techniques. Strong emphasis has been put on the scale of measurement, to filter irrelevant information and to understand the relationship between interactions involved. The near-infrared spectroscopic technique, presented here, samples directly the changes in signal absorbance and its variation in the process at multiple locations in a print production line. The in-line non-contact measurements are facilitated by using several diffuse reflectance probes, giving the absolute water/moisture content from a defined position in the dynamic process in real-time. The nearinfrared measurement data illustrate the changes in moisture content as the paper is passing through the printing nips and dryer, respectively, and the analysis of the mechanisms involved highlight the roles of the contacting surfaces and the relative liquid carrier properties of both non-image and printed image areas. The thesis includes laboratory studies on wetting of porous media in the form of coated paper and compressed pigment tablets by mono-, dual-, and multi-component liquids, and paper water/moisture content analysis in both offline and online conditions, thus also enabling direct sampling of temporal water/moisture profiles from multiple locations. One main focus in this thesis was to establish a measurement system which is able to monitor rapid changes in moisture content of paper. The study suggests that near-infrared diffuse reflectance spectroscopy can be used as a moisture sensitive system and to provide accurate online qualitative indicators, but, also, when accurately calibrated, can provide quantification of water/moisture levels, its distribution and dynamic liquid transfer. Due to the high sensitivity, samples can be measured with excellent reproducibility and good signal to noise ratio. Another focus of this thesis was on the evolution of the moisture content, i.e. changes in moisture content referred to (re)wetting, and liquid distribution during printing of coated paper. The study confirmed different wetting phases together with the factors affecting each phase both for a single droplet and a liquid film applied on a porous substrate. For a single droplet, initial capillary driven imbibition is followed by equilibrium pore filling and liquid retreat by evaporation. In the case of a liquid film applied on paper, the controlling factors defining the transportation were concluded to be the applied liquid volume in relation to surface roughness, capillarity and permeability of the coating giving the liquid uptake capacity. The printing trials confirmed moisture gradients in the printed sheet depending on process parameters such as speed, fountain solution dosage and drying conditions as well as the printed layout itself. Uneven moisture distribution in the printed sheet was identified to be one of the sources for waving appearance and the magnitude of waving was influenced by the drying conditions.

Interdependence of Emerging Eastern European stock markets

One of the main developments in the global economy during the past decades has been the growth of emerging economies. Projections for their long-term growth, changes in the investment climate, corporate transparency and demography point to an increasing role for these emerging economies in the global economy. Today, emerging economies are usually considered as financial markets offering opportunities for high returns, good risk diversification and improved return-to-risk ratios. However, researchers have noted that these advantages may be in decline because of the increasing market integration. Nevertheless, it is likely that certain financial markets and specific sectors will remain partially segmented and somewhat insulated from the global economy for the year to come. This doctoral dissertation investigates several stock markets in Emerging Eastern Europe (EEE), including the ones in Russia, Poland, Hungary, the Czech Republic, Bulgaria and Slovenia. The objective is to analyze the returns and financial risks in these emerging markets from international investor’s point of view. This study also examines the segmentation/integration of these financial markets and the possibilities to diversify and hedge financial risk. The dissertation is divided into two parts. The first includes a review of the theoretical background for the articles and a review of the literature on EEE stock markets. It includes an overview of the methodology and research design applied in the analysis and a summary of articles from the second part of this dissertation and their main findings. The second part consists of four research publications. This work contributes to studies on emerging stock markets in four ways. First, it adds to the body of research on the pricing of risk, providing new empirical evidence about partial stock market segmentation in EEE. The results suggest that the aggregate emerging market risk is a relevant driver for stock market returns and that this market risk can be used to price financial instruments and forecast their performance. Second, it contributes to the empirical research on the integration of stock markets, asset prices and exchange rates by identifying the relationships between these markets through volatility and asset pricing. The results show that certain sectors of stock markets in EEE are not as integrated as others. For example, the Polish consumer goods sector, the Hungarian telecommunications sector, and the Czech financial sector are somewhat isolated from their counterparts elsewhere in Europe. Nevertheless, an analysis of the impact of EU accession in 2004 on stock markets suggests that most of the EEE markets are becoming increasingly integrated with the global markets. Third, this thesis complements the scientific literature in the field of shock and volatility spillovers by examining the mechanism of spillover distribution among the EU and EEE countries. The results illustrate that spillovers in emerging markets are mostly from a foreign exchange to the stock markets. Moreover, the results show that the effects of external shocks on stock markets have increased after the enlargement of the EU in 2004. Finally, this study is unique because it analyzes the effects of foreign macroeconomic news on geographically closely related countries. The results suggest that the effects of macroeconomic announcements on volatility are significant and have effect that varies across markets and their sectors. Moreover, the results show that the foreign macroeconomic news releases, somewhat surprisingly, have a greater effect on the EEE markets than the local macroeconomic news. This dissertation has a number of implications for the industry and for practitioners. It analyses financial risk associated with investing in Emerging Eastern Europe. Investors may use this information to construct and optimize investment portfolios. Moreover, this dissertation provides insights for investors and portfolio managers considering asset allocation to protect value or obtain higher returns. The results have also implications for asset pricing and portfolio selection in light of macroeconomic news releases.

The holistic military capability life cycle model

Abstract - This paper reviews existing military capability models and the capability life cycle. It proposes a holistic capability life-cycle model (HCLCM) that combines capability systems with related capability models. ISO 15288 standard is used as a framework to construct the HCLCM. The HCLCM also shows how capability models and systems relate to each other throughout the capability life cycle. The main contribution of this paper is conceptual in nature. The model complements the existing, but still evolving, understanding of the military capability life cycle in a holistic and systemic way. The model also increases understanding and facilitates communication among various military capability stakeholders.

Aamiaiskahvilasta ötökkätarjontaan. Suomen kirjoitetun yleiskielen morfosyntaktisten yhdyssanarakenteiden produktiivisuus

Tämän tutkimuksen kohde on suomen kirjoitetun yleiskielen morfosyntaktisten yhdyssanarakenteiden produktiivisuus. Tutkimuksen tärkein päämäärä on selvittää, kuinka ahkerasti erilaisia suomen kielen suomia mahdollisuuksia käytetään uusien yhdyssanojen muodostuksessa. Käytännöllistä produktiivisuutta kartoittava tutkimus täydentää kielioppien ja sanastonkuvausten antamaa kuvaa kielestä. Tutkimuksen kohteena oleva kielimuoto on kaikille kielenkäyttäjille yhteinen kirjoitettu yleiskieli. Tutkimusaineisto koostuu 28 091 uudesta yhdyssanasta, jotka on kerätty painetun median kielestä vuosina 2000–2009. Aineiston pohjana on Kotimaisten kielten keskuksen Nykysuomen sanastotietokanta, johon poimitaan uusia ja uudella tavalla käytettyjä sanoja ensisijaisesti sanakirjatyön ja kielenhuollon tarpeisiin. Tutkimusaihetta lähestytään useiden yhdyssanan osien muotoa, sanaluokkaa, määrää ja pituutta koskevien alakysymysten kautta. Tutkimus etenee yksittäisten muut-tujien käsittelystä muuttujien keskinäisiä suhteita tarkasteleviin malleihin. Tutkimuksessa käytetään kaksivaiheista metodia: Metodin ensimmäinen askel on uudessa sanastossa havaittujen rakenteiden tyyppifrekvenssin tilastollinen analyysi. Toinen askel on varsinkin matalafrekvenssisten tai tilastollisessa analyysissa muuten poikkeavaksi osoittautuneiden rakenteiden kvalitatiivinen tarkastelu. Metodi on kehitetty tätä tutkimusta varten, sillä aiemmin produktiivisuuden mittaamisessa käytetyt menetelmät eivät sellaisenaan sovi suomen kielen yhdyssanarakenteiden tutkimukseen. Tutkimusmetodien kehittäminen on tutkimuksen keskeinen tavoite. Tutkimus osoittaa, että suomen kielen uudet yhdyssanat ovat rakenteeltaan homogeenisempiä, kuin aiempia kielenkuvauksia lukemalla voisi olettaa. Uusi suomen kielen yhdyssana on todennäköisimmin kahdesta substantiivista yhdistämällä muodostettu substantiivi, jonka alkuosa on nominatiivissa eikä kongruoi jälkiosan kanssa. Ennakko-oletusta huomattavasti yleisempiä ovat myös prefiksinkaltaisella alkuosalla alkavat yhdyssanat. Genetiivialkuiset yhdyssanat puolestaan ovat ennakko-oletusta harvinaisempia. Kaikki kieliopillisesti mahdolliset yhdyssanarakenteet eivät ole lainkaan produktiivisia kielenkäytön tasolla. Tutkimus on luonteeltaan kielen rakennetta kartoittavaa perustutkimusta. Tutkimustulosten tärkeimmät sovellusalat ovat kieliteknologia ja sananmuodostuksen opetus. Tutkimus avaa useita näkökulmia jatkotutkimukselle.

Utilization of Statistical Methods for Management in the Forest Industry

The strongest wish of the customer concerning chemical pulp features is consistent, uniform quality. Variation may be controlled and reduced by using statistical methods. However, studies addressing the application and benefits of statistical methods in forest product sector are scarce. Thus, the customer wish is the root cause of the motivation behind this dissertation. The research problem addressed by this dissertation is that companies in the chemical forest product sector require new knowledge for improving their utilization of statistical methods. To gain this new knowledge, the research problem is studied from five complementary viewpoints – challenges and success factors, organizational learning, problem solving, economic benefit, and statistical methods as management tools. The five research questions generated on the basis of these viewpoints are answered in four research papers, which are case studies based on empirical data collection. This research as a whole complements the literature dealing with the use of statistical methods in the forest products industry. Practical examples of the application of statistical process control, case-based reasoning, the cross-industry standard process for data mining, and performance measurement methods in the context of chemical forest products manufacturing are brought to the public knowledge of the scientific community. The benefit of the application of these methods is estimated or demonstrated. The purpose of this dissertation is to find pragmatic ideas for companies in the chemical forest product sector in order for them to improve their utilization of statistical methods. The main practical implications of this doctoral dissertation can be summarized in four points: 1. It is beneficial to reduce variation in chemical forest product manufacturing processes 2. Statistical tools can be used to reduce this variation 3. Problem-solving in chemical forest product manufacturing processes can be intensified through the use of statistical methods 4. There are certain success factors and challenges that need to be addressed when implementing statistical methods

Recognition of nucleic acids by metal ion complexes

Metal-ion-mediated base-pairing of nucleic acids has attracted considerable attention during the past decade, since it offers means to expand the genetic code by artificial base-pairs, to create predesigned molecular architecture by metal-ion-mediated inter- or intra-strand cross-links, or to convert double stranded DNA to a nano-scale wire. Such applications largely depend on the presence of a modified nucleobase in both strands engaged in the duplex formation. Hybridization of metal-ion-binding oligonucleotide analogs with natural nucleic acid sequences has received much less attention in spite of obvious applications. While the natural oligonucleotides hybridize with high selectivity, their affinity for complementary sequences is inadequate for a number of applications. In the case of DNA, for example, more than 10 consecutive Watson-Crick base pairs are required for a stable duplex at room temperature, making targeting of sequences shorter than this challenging. For example, many types of cancer exhibit distinctive profiles of oncogenic miRNA, the diagnostics of which is, however, difficult owing to the presence of only short single stranded loop structures. Metallo-oligonucleotides, with their superior affinity towards their natural complements, would offer a way to overcome the low stability of short duplexes. In this study a number of metal-ion-binding surrogate nucleosides were prepared and their interaction with nucleoside 5´-monophosphates (NMPs) has been investigated by 1H NMR spectroscopy. To find metal ion complexes that could discriminate between natural nucleobases upon double helix formation, glycol nucleic acid (GNA) sequences carrying a PdII ion with vacant coordination sites at a predetermined position were synthesized and their affinity to complementary as well as mismatched counterparts quantified by UV-melting measurements.

Social media in the purchasing of knowledge-intensive business services

The purpose of this thesis was to understand how industrial buyers utilize social media in the purchasing of knowledge-intensive business services. By combining theories from past research a theoretical framework was formed to visualize the role of the social media at the different stages of the purchasing process. The subject was approached from the industrial buyers’ perspective instead of the knowledge-intensive business firm. The research was conducted using two qualitative research methods: interviews and netnography. The selected interviewees have been involved in the decision-making unit for purchasing knowledge-intensive business services. Additionally all of them are using various social media. Based on the interviews social media is used merely to support decision-making. Some of the interviewees had also shared their own experiences about the service and collaboration with the service provider with other social media users. Based on the interviews two social media were chosen for closer examination. The findings from netnography support the results from the interviews. The outcome of knowledgeintensive business services is dependable of the professionals. Therefore the information is used during decision-making process to confirm the formed image of the service, and the professionals of the service provider. Information obtained from social media complements information provided by the supplier. Even though the interviewees had not themselves used social media to find information about the service during search process, finding from netnography suggest it to exist. Industrial buyers ask other users’ opinions and experience about the services, and receive recommendations to them. Some recommendations are given publicly, but more discreet information is shared in private conversations. Observations in social media show that industrial buyers might be exposed to triggers to promote problem recognition as well. Companies share news and successful customer cases through their social media profiles, which might affect the industrial buyers, but to confirm this requires further research. The industrial buyers’ use of social media during different purchasing processes of knowledgeintensive business services can be conceptualize based on the findings. This helps companies to create right content to their social media pages, and encourage professionals to develop their networks in social media.