Estimation of genetic parameters for test-day milk production at different stages of lactation of Finnish Ayrshire heifers

Selostus: Ayrshire-ensikoiden koelypsykohtaisen maidontuotannon perinnölliset tunnusluvut laktaation eri vaiheissa

Community-acquired pneumonia in adult patients with special reference to rapid methods for etiological diagnosis

Aikuispotilaan kotisyntyisen keuhkokuumeen etiologinen diagnostiikka mikrobiologisilla pikamenetelmillä Tausta. Keuhkokuume on vakava sairaus, johon sairastuu Suomessa vuosittain n. 60 000 aikuista. Huolimatta siitä, että taudin hoito on kehittynyt, siihen liittyy yhä merkittävä, 6-15%:n kuolleisuus. Alahengitystieinfektion aiheuttajamikrobien tunnistaminen on myös edelleen haasteellista. Tavoitteet. Tämän työn tavoitteena oli tutkia Turun yliopistollisessa keskussairaalassa hoidettujen aikuispotilaiden keuhkokuumeen etiologiaa sekä selvittää uusien mikrobiologisten pikamenetelmi¬en hyödyllisyyttä taudinaiheuttajan toteamisessa. Aineisto. Osatöiden I ja III aineisto koostui 384 Turun yliopistollisen keskussairaalaan infektio-osastolla hoidetusta keuhkokuumepotilaasta. Osatyössä I tutkittiin keuhkokuumeen aiheuttaja¬mikrobeja käyttämällä perinteisten menetelmien lisäksi antigeeniosoitukseen ja PCR-tekniikkaan perustuvia pikamenetelmiä. Osatyö II käsitti 231 potilaasta koostuvan alaryhmän, jossa tutkittiin potilaiden nielun limanäytteestä rinovirusten ja enterovirusten esiintyvyyttä. Osatyössä III potilailta tutkittiin plasman C-reaktiivisen proteiinin (CRP) pitoisuus ensimmäisten viiden sairaalahoitopäi¬vän aikana. Laajoja tilastotieteellisiä analyysejä käyttämällä selvitettiin CRP:n käyttökelpoisuutta sairauden vaikeusasteen arvioinnissa ja komplikaatioiden kehittymisen ennustamisessa. Osatyössä IV 68 keuhkokuumepotilaan sairaalaan tulovaiheessa otetuista näytteistä määritettiin neutrofiilien pintareseptorien ekspressio. Osatyössä V analysoitiin sisätautien vuodeosastoilla vuosina 1996-2000 keuhkokuumepotilaille tehtyjen keuhkohuuhtelunäytteiden laboratoriotutkimustulokset. Tulokset. Keuhkokuumeen aiheuttaja löytyi 209 potilaalta, aiheuttajamikrobeja löydettiin kaikkiaan 230. Näistä aiheuttajista 135 (58.7%) löydettiin antigeenin osoituksella tai PCR-menetelmillä. Suu¬rin osa, 95 (70.4%), todettiin pelkästään kyseisillä pikamenetelmillä. Respiratorinen virus todettiin antigeeniosoituksella 11.1% keuhkokuumepotilaalla. Eniten respiratorisia viruksia löytyi vakavaa keuhkokuumetta sairastavilta potilailta (20.3%). 231 keuhkokuumepotilaan alaryhmässä todettiin PCR-menetelmällä picornavirus 19 (8.2%) potilaalla. Respiratorinen virus löytyi tässä potilasryh¬mässä kaiken kaikkiaan 47 (20%) potilaalta. Näistä 17:llä (36%) löytyi samanaikaisesti bakteerin aiheuttama infektio. CRP-tasot olivat sairaalaan tulovaiheessa merkitsevästi korkeammat vakavaa keuhkokuumetta (PSI-luokat III-V) sairastavilla potilailla kuin lievää keuhkokuumetta (PSI-luokat I-II) sairastavilla potilailla (p <0.001). Yli 100 mg/l oleva CRP-taso neljän päivän kuluttua sairaa¬laan tulosta ennusti keuhkokuumeen komplikaatiota tai huonoa hoitovastetta. Neutrofiilien komple¬menttireseptorin ekspressio oli pneumokokin aiheuttamaa keuhkokuumetta sairastavilla merkitse¬västi korkeampi kuin influenssan aiheuttamaa keuhkokuumetta sairastavilla. BAL-näytteistä vain yhdessä 71:stä (1.3%) todettiin diagnostinen bakteerikasvu kvantitatiivisessa viljelyssä. Uusilla menetelmilläkin keuhkokuumeen aiheuttaja löytyi vain 9.8% BAL-näytteistä. Päätelmät. Uusilla antigeeniosoitus- ja PCR-menetelmillä keuhkokuumeen etiologia voidaan saada selvitettyä nopeasti. Lisäksi näitä menetelmiä käyttämällä taudin aiheuttajamikrobi löytyi huomattavasti suuremmalta osalta potilaista kuin pelkästään tavanomaisia menetelmiä käyttämällä. Pikamenetelmien hyödyllisyys vaihteli taudin vaikeusasteen mukaan. Respiratorinen virus löytyi huomattavan usein keuhkokuumetta sairastavilta potilailta, ja näiden potilaiden taudinkuva oli usein vaikea. Tulovaiheen korkeaa CRP-tasoa voidaan käyttää lisäkeinona arvioitaessa keuhkokuumeen vaikeutta. CRP on erityisen hyödyllinen arvioitaessa hoitovastetta ja riskiä komplikaatioiden ke¬hittymiseen. Neutrofiilien komplementtireseptorin ekspression tutkiminen näyttää lupaavalta pi¬kamenetelmältä erottamaan bakteerien ja virusten aiheuttamat taudit toisistaan. Antimikrobihoitoa saavilla potilailla BAL-tutkimuksen löydökset olivat vähäiset ja vaikuttivat hoitoon vain harvoin.

E-PORT. Improving efficiency of Finnish port community by intelligent systems Final report of the Mobile Port project

The management of port-related supply chains is challenging due to the complex and heterogeneous operations of the ports with several actors and processes. That is why the importance of information sharing is emphasised in the ports. However, the information exchange between different port-related actors is often cumbersome and it still involves a lot of manual work and paper. Major ports and port-related actors usually have advanced information systems in daily use but these systems are seldom interoperable with each other, which prevents economies of scale to be reached. Smaller ports and companies might not be equipped with electronic data transmission at all. This is the final report of the Mobile port (MOPO) project, which has sought ways to improve the management and control of port-related sea and inland traffic with the aid of ICT technologies. The project has studied port community systems (PCS) used worldwide, evaluated the suitability of a PCS for the Finnish port operating environment and created a pilot solution of a Finnish PCS in the port of HaminaKotka. Further, the dry port concept and its influences on the transportation system have been explored. The Mobile Port project comprised of several literature reviews, interviews of over 50 port-related logistics and/or ICT professionals, two different kinds of simulation models as well as designing and implementing of the pilot solution of the Finnish PCS. The results of these multiple studies are summarised in this report. Furthermore, recommendations for future actions and the topics for further studies are addressed in the report. The study revealed that the information sharing in a typical Finnish port-related supply chain contains several bottlenecks that cause delays in shipments and waste resources. The study showed that many of these bottlenecks could be solved by building a port community system for the Finnish port community. Almost 30 different kinds of potential services or service entities of a Finnish PCS were found out during the study. The basic requirements, structure, interfaces and operation model of the Finnish PCS were also defined in the study. On the basis of the results of the study, a pilot solution of the Finnish PCS was implemented in the port of HaminaKotka. The pilot solution includes a Portconnect portal for the Finnish port community system (available at https://www.portconnect.fi) and two pilot applications, which are a service for handling the information flows concerning the movements of railway wagons and a service for handling the information flows between Finnish ports and Finland-Russian border. The study also showed that port community systems can be used to improve the environmental aspects of logistics in two different ways: 1) PCSs can bring direct environmental benefits and 2) PCSs can be used as an environmental tool in a port community. On the basis of the study, the development of the Finnish port community system should be continued by surveying other potential applications for the Finnish PCS. It is also important to study if there is need and resources to extend the Finnish PCS to operate in several ports or even on a national level. In the long run, it could be reasonable to clarify whether there would be possibilities to connect the Finnish PCS as a part of Baltic Sea wide, European-wide or even worldwide maritime and port-related network in order to get the best benefit from the system

The ELY Centre for Southwest Finland is involved in everyday life

The ELY Centre for Southwest Finland is a diverse and broad-ranging development and service centre. Our goal is to strengthen wellbeing in Southwest Finland and Satakunta. The aim of our operations is to ensure sustainable wellbeing, a vibrant business community, attractive municipalities and the wider environment, and a satisfied population through clustered collaboration.

Model-based testing of software systems : functionality and performance

Software is a key component in many of our devices and products that we use every day. Most customers demand not only that their devices should function as expected but also that the software should be of high quality, reliable, fault tolerant, efficient, etc. In short, it is not enough that a calculator gives the correct result of a calculation, we want the result instantly, in the right form, with minimal use of battery, etc. One of the key aspects for succeeding in today's industry is delivering high quality. In most software development projects, high-quality software is achieved by rigorous testing and good quality assurance practices. However, today, customers are asking for these high quality software products at an ever-increasing pace. This leaves the companies with less time for development. Software testing is an expensive activity, because it requires much manual work. Testing, debugging, and verification are estimated to consume 50 to 75 per cent of the total development cost of complex software projects. Further, the most expensive software defects are those which have to be fixed after the product is released. One of the main challenges in software development is reducing the associated cost and time of software testing without sacrificing the quality of the developed software. It is often not enough to only demonstrate that a piece of software is functioning correctly. Usually, many other aspects of the software, such as performance, security, scalability, usability, etc., need also to be verified. Testing these aspects of the software is traditionally referred to as nonfunctional testing. One of the major challenges with non-functional testing is that it is usually carried out at the end of the software development process when most of the functionality is implemented. This is due to the fact that non-functional aspects, such as performance or security, apply to the software as a whole. In this thesis, we study the use of model-based testing. We present approaches to automatically generate tests from behavioral models for solving some of these challenges. We show that model-based testing is not only applicable to functional testing but also to non-functional testing. In its simplest form, performance testing is performed by executing multiple test sequences at once while observing the software in terms of responsiveness and stability, rather than the output. The main contribution of the thesis is a coherent model-based testing approach for testing functional and performance related issues in software systems. We show how we go from system models, expressed in the Unified Modeling Language, to test cases and back to models again. The system requirements are traced throughout the entire testing process. Requirements traceability facilitates finding faults in the design and implementation of the software. In the research field of model-based testing, many new proposed approaches suffer from poor or the lack of tool support. Therefore, the second contribution of this thesis is proper tool support for the proposed approach that is integrated with leading industry tools. We o er independent tools, tools that are integrated with other industry leading tools, and complete tool-chains when necessary. Many model-based testing approaches proposed by the research community suffer from poor empirical validation in an industrial context. In order to demonstrate the applicability of our proposed approach, we apply our research to several systems, including industrial ones.