Carbon dioxide evolution from snow-covered agricultural ecosystems in Finland

Selostus: Hiilidioksidin kulku lumipeitteisessä ja paljaassa maassa

The evolution ofRussian power industry from monopoly to market operation

ei

On the differential evolution algorithm and its appliation to training radial basis function networks

The parameter setting of a differential evolution algorithm must meet several requirements: efficiency, effectiveness, and reliability. Problems vary. The solution of a particular problem can be represented in different ways. An algorithm most efficient in dealing with a particular representation may be less efficient in dealing with other representations. The development of differential evolution-based methods contributes substantially to research on evolutionary computing and global optimization in general. The objective of this study is to investigatethe differential evolution algorithm, the intelligent adjustment of its controlparameters, and its application. In the thesis, the differential evolution algorithm is first examined using different parameter settings and test functions. Fuzzy control is then employed to make control parameters adaptive based on an optimization process and expert knowledge. The developed algorithms are applied to training radial basis function networks for function approximation with possible variables including centers, widths, and weights of basis functions and both having control parameters kept fixed and adjusted by fuzzy controller. After the influence of control variables on the performance of the differential evolution algorithm was explored, an adaptive version of the differential evolution algorithm was developed and the differential evolution-based radial basis function network training approaches were proposed. Experimental results showed that the performance of the differential evolution algorithm is sensitive to parameter setting, and the best setting was found to be problem dependent. The fuzzy adaptive differential evolution algorithm releases the user load of parameter setting and performs better than those using all fixedparameters. Differential evolution-based approaches are effective for training Gaussian radial basis function networks.

Mobile Communications within the European Union: The Role of Location in the Evolution and Forecasting of the Diffusion Process

In the European Union, the importance of mobile communications was realized early on. The process of mobile communications becoming ubiquitous has taken time, as the innovation of mobile communications diffused into the society. The aim of this study is to find out how the evolution and spatial patterns of the diffusion of mobile communications within the European Union could be taken into account in forecasting the diffusion process. There is relatively lot of research of innovation diffusion on the individual (micro) andthe country (macro) level, if compared to the territorial level. Territorial orspatial diffusion refers either to the intra-country or inter-country diffusionof an innovation. In both settings, the dif- fusion of a technological innovation has gained scarce attention. This study adds knowledge of the diffusion between countries, focusing especially on the role of location in this process. The main findings of the study are the following: The penetration rates of the European Union member countries have become more even in the period of observation, from the year 1981 to 2000. The common digital GSM system seems to have hastened this process. As to the role of location in the diffusion process, neighboring countries have had similar diffusion processes. They can be grouped into three, the Nordic countries, the central and southern European countries, and the remote southern European countries. The neighborhood effect is also domi- nating in thegravity model which is used for modeling the adoption timing of the countries. The subsequent diffusion within a country, measured by the logistic model in Finland, is af- fected positively by its economic situation, and it seems to level off at some 92 %. Considering the launch of future mobile communications systemsusing a common standard should implicate an equal development between the countries. The launching time should be carefully selected as the diffusion is probably delayed in economic downturns. The location of a country, measured by distance, can be used in forecasting the adoption and diffusion. Fi- nally, the result of penetration rates becoming more even implies that in a relatively homoge- nous set of countries, such as the European Union member countries, the estimated final pene- tration of a single country can be used for approximating the penetration of the others. The estimated eventual penetration of Finland, some 92 %, should thus also be the eventual level for all the European Union countries and for the European Union as a whole.

The role of trust and its evolution in distributed teams in a multinational organisation

Tutkimuksen päätavoitteena on ollut selvittää miten kansallinen ja organisaatiokulttuuri, niihin liittyvät normit ja arvot edesauttavat tai vaikeuttavat luottamuksen kehittymistä monikulttuurisissa tiimeissä maailmanlaajuisessa organisaatiossa. Tutkimuksen avulla haluttiin myös selvittää miten luottamus kehittyy hajautetuissa monikansallisissa tiimeissä WorldCom Internationalissa. Empiirinen tutkimusmenetelmä perustuu kvalitatiivisiin teemahaastatteluihin, jotka tehtiin WorldComin työntekijöille. Tutkimuksessa havaittiin, ettei yhteisten sosiaalisten normien merkitys luottamuksen syntymiselle ole niin merkittävä, koska WorldComin yhtenäiset toimintatavat sekä hallitseva amerikkalaisen emoyhtiön "kotikulttuuri" muodostavat yhtenäiset toimintalinjat tiimeissä. Tietokonevälitteisen kommunikoinnin jatkuva käyttö on edesauttanut työntekijöiden ns. sosiaalisen älyn kehittymistä, sillä henkilökohtaisen tapaamisen puuttuminen kehittää vastaavasti taitoja aistia ja tulkita sähköpostien tai puhelinneuvotteluiden aikana välittyviä vastapuolen "näkymättömiä" vihjeitä.

The Sottunga-Jurmo shear zone : structure and deformation history of a crustal-scale ductile shear zone in SW Finland

The aim of this study is to gain a better understanding of the structure and the deformation history of a NW-SE trending regional, crustal-scale shear structure in the Åland archipelago, SW Finland, called the Sottunga-Jurmo shear zone (SJSZ). Approaches involving e.g. structural geology, geochronology, geochemistry and metamorphic petrology were utilised in order to reconstruct the overall deformation history of the study area. The study therefore describes several features of the shear zone including structures, kinematics and lithologies within the study area, the ages of the different deformation phases (ductile to brittle) within the shear zone, as well as some geothermobarometric results. The results indicate that the SJSZ outlines a major crustal discontinuity between the extensively migmatized rocks NE of the shear zone and the unmigmatised, amphibolite facies rocks SW of the zone. The main SJSZ shows overall dextral lateral kinematics with a SW-side up vertical component and deformation partitioning into pure shear and simple shear dominated deformation styles that was intensified toward later stages of the deformation history. The deformation partitioning resulted in complex folding and refolding against the SW margin of the SJSZ, including conical and sheath folds, and in a formation of several minor strike-slip shear zones both parallel and conjugate to the main SJSZ in order to accommodate the regional transpressive stresses. Different deformation phases within the study area were dated by SIMS (zircon U-Pb), ID-TIMS (titanite U-Pb) and 40Ar/39Ar (pseudotachylyte wholerock) methods. The first deformation phase within the ca. 1.88 Ga rocks of the study area is dated at ca. 1.85 Ga, and the shear zone was reactivated twice within the ductile regime (at ca. 1.83 Ga and 1.79 Ga), during which the strain was successively increasingly partitioned into the main SJSZ and the minor shear zones. The age determinations suggest that the orogenic processes within the study area did not occur in a temporal continuum; instead, the metamorphic zircon rims and titanites show distinct, 10-20 Ma long breaks in deformation between phases of active deformation. The results of this study further imply slow cooling of the rocks through 600-700ºC so that at 1.79 Ga, 2 the temperature was still at least 600ºC. The highest recorded metamorphic pressures are 6.4-7.1 kbar. At the late stages or soon after the last ductile phase (ca. 1.79 Ga), relatively high-T mylonites and ultramylonites were formed, witnessing extreme deformation partitioning and high strain rates. After the rocks reached lower amphibolite facies to amphibolite-greenschist facies transitional conditions (ca. 500-550ºC), they cooled rapidly, probably due to crustal uplift and exhumation. The shear zone was reactivated at least once within the semi-brittle to brittle regime between ca. 1.79 Ga and 1.58 Ga, as evidenced by cataclasites and pseudotachylytes. In summary, the results of this study suggest that the Sottunga-Jurmo shear zone (and the South Finland shear zone) defines a major crustal discontinuity, and played a central role in accommodating the regional stresses during and after the Svecofennian orogeny.

Evolution of Ba and Role of Absorptive Capacity in Collaboration between MNCs and Chinese Universities in China

During the recent years, collaboration with Chinese universities has aroused growing interest among multinational companies (MNCs). Cross-cultural university-industry (U-I) collaboration creates various challenges in collaborative knowledge creation and innovation due to the differences e.g. between university and company motivation, objectives and activities. Also different values, norms, and means of actions result often in collisions and misunderstandings. This thesis examines the establishment of the relationships and the evolution of the collaboration between MNCs and Chinese universities. Empirical findings underscore that the partners in collaboration are required to possess research interest as well as capability to acquire, assimilate and exploit new external knowledge. Time and communication have a critical role in the evolution of the collaboration. In China the personal relationships, guanxi, play an important role. Collaborative knowledge creation requires a platform, Ba, which enables the creation of common understanding, commitment, trust and mutual respect. Empirical data has been collected through interviewing company experts and academe of Chinese universities from ICT and forest industries as well as attending panel discussions and meetings with the experts from the field of study.