Estimation of soil nitrate in the spring as a basis for adjustment of nitrogen fertiliser rates

Selostus: Maassa olevan nitraattitypen arviointi simulointimallin avulla

Workplace adjustment of an expatriate manager: identifying key components from a social capital perspective

Perustaen tutkimuksen kansainvälisen sopeutumisen teoreettiselle rungolle täydentäen sitä sosiaalisen pääoman teorialla, tämä tutkielma tutkii kuinka johtoasemassa oleva ulkosuomalainen luo hyvin toimivan sosiaalisen verkoston hong kongilaisella työpaikallansa. Tutkielma lähestyy aihetta Nahapietin ja Ghoshalin (1998) kehittämän sosiaalisen pääoman kolmen ulottuvuuden mallin avulla. Tutkielmassa kirjallisuudesta haettua teoriaa käytetään tutkimustavarten tehtyjen haastattelujen analysointiapuna. Tutkimalla sosiaalista pääomaa, kansainvälisen sopeutumisen kirjallisuutta, ekspatriootin perinteisiä menestystekijöitä ja guanxia (kiinalaisten henkilökohtaisia siteitä) tämän tutkimuksen teoriaosuus implikoi, että sosiaalisella pääomalla tulisi olla täydentävä rooli kansainvälisen sopeutumisen kirjallisuudessa. Sosiaalisen pääoman kolmen ulottuvuuden mallia käytetään pohjana empiirisen datan analysointiin. Tutkielman empiiriset tulokset osoittavat, että työpaikan sosiaaliseen verkostoon sopeutuminen liittyy exspatriootin kykyyn käsitellä estäviä ja mahdollistajia sosiaalisen pääoman luontiin vaikuttavia tekijöitä. Lisäksi sopeutuminen vaatii exspatriootin tunnistavan kohdemaalle tyypillisiä exspatriootin menestystekijöitä ja ekspatriootinomia tärkeitä henkilökohtaisia ominaisuuksia.

Numerical Investigation of Flow Past a Circular Cylinder and in a Staggered Tube Bundle Using Various Turbulence Models

Transitional flow past a three-dimensional circular cylinder is a widely studied phenomenon since this problem is of interest with respect to many technical applications. In the present work, the numerical simulation of flow past a circular cylinder, performed by using a commercial CFD code (ANSYS Fluent 12.1) with large eddy simulation (LES) and RANS (κ - ε and Shear-Stress Transport (SST) κ - ω! model) approaches. The turbulent flow for ReD = 1000 & 3900 is simulated to investigate the force coefficient, Strouhal number, flow separation angle, pressure distribution on cylinder and the complex three dimensional vortex shedding of the cylinder wake region. The numerical results extracted from these simulations have good agreement with the experimental data (Zdravkovich, 1997). Moreover, grid refinement and time-step influence have been examined. Numerical calculations of turbulent cross-flow in a staggered tube bundle continues to attract interest due to its importance in the engineering application as well as the fact that this complex flow represents a challenging problem for CFD. In the present work a time dependent simulation using κ – ε, κ - ω! and SST models are performed in two dimensional for a subcritical flow through a staggered tube bundle. The predicted turbulence statistics (mean and r.m.s velocities) have good agreement with the experimental data (S. Balabani, 1996). Turbulent quantities such as turbulent kinetic energy and dissipation rate are predicted using RANS models and compared with each other. The sensitivity of grid and time-step size have been analyzed. Model constants sensitivity study have been carried out by adopting κ – ε model. It has been observed that model constants are very sensitive to turbulence statistics and turbulent quantities.

The potential of social networking sites in inpatriate adjustment

People make up one of the most important resources for a corporation and therefore it has to continuously seek an ever more diverse and international workforce. Inpatriation is another way of utilizing foreign expertise in a corporation. An inpatriate refers to a person that is on an international assignment at the headquarters of a corporation, where they have been sent either from a subsidiary abroad or from a third country outside the corporation. Strengthening the social network of the inpatriate and their family contributes to the adjustment process and furthermore the success of the work assignment. As social networking sites are currently the fastest developing personal networking tools in the world, it is interesting to see how they can help in inpatriate adjustment. The objective of this thesis is to explore the potential of social networking sites (SNS) in inpatriate adjustment. The main objective can be divided into three sub objectives: 1. What is SNS used for during the inpatriate assignment? 2. What are the inpatriates’ motivations to use SNS? 3. Could the three facets of adjustment (work, interaction and general) be gained through SNS? This qualitative study utilizes the theme interview data collection method and the thematic analysis approach for analysing the interview data. From the interviews with five Indian inpatriates in Finland the most mentioned uses of SNS were related to participating (sharing opinions, recommendations and discussing things and connecting to friends, family and colleagues) and consuming (collecting information for work and free time), the least mentioned use of SNS was producing (posting videos, photos and updates). An interesting finding was that the five interviewees did not use SNS for purely entertainment motives at all during their assignment. This thesis found that all three facets of adjustment could potentially be gained through SNS.

The adjustment from Russia to Finland for corporate repatriates: How the repatriation experience influences readjustment in the workplace

To manage foreign operations, companies must often send their employees on international assignments. Repatriating these expatriates can be difficult because they have been forgotten during their posting, and their new experiences are not utilised. In addition to the possible difficulties in organisational repatriation, the returnee can suffer from readjustment problems after a lengthy stay abroad has changed their habits and even identity. This thesis examines the repatriation experience of Finnish assignees returning from Russia. The purpose of the study is to understand how the repatriation experience influences their readjustment to work in Finland. This experience is influenced by many factors including personal and situational changes, the repatriation process, job and organisational factors, and individual’s motives. The theoretical background of the study is founded on two models of repatriation adjustment. A refined, holistic theoretical framework for the study is created. It describes the formation of the repatriation experience and its importance for readjustment to work and retention. The qualitative research approach is suitable for the thesis which examines the returnees’ personal experiences and feelings: a qualitative case study aims to explain the phenomenon in-depth and comprehensively. The data was collected in summer 2013 through semi-standardised interviews with eight Finnish repatriates. They had returned from Russia within the last two years. The data was analysed by structuring the interview transcripts using template analysis. The results supported earlier literature and suggest that the re-entry remains a challenging phase for both the individual and the company. For some, adjusting to a new job was difficult for various reasons. The repatriates underwent personal change and development and felt it was for the better. Many repatriates criticised the company’s repatriation process upon return. Finding a suitable return job was not clear. Instead, the returnees had to be active in finding a new position. Many assignees had only modest career-related motives regarding the assignment and they had realistic expectations about the return. Therefore they were not extremely surprised or dissatisfied when they were not actively offered positions or support by the company. The significance of motives stood out even more than the theory predicted. As predicted, they are linked to the expectations of employees. Moreover, if the employees are motivated to remain in the company, they can tolerate partly a negative repatriation experience. Despite the complexity of the return and readjustment, the assignment as a whole was seen as a rewarding experience by all participants.

Two-phase flow measurements with spacer grid in a rod bundle geometry

Heat transfer effectiveness in nuclear rod bundles is of great importance to nuclear reactor safety and economics. An important design parameter is the Critical Heat Flux (CHF), which limits the transferred heat from the fuel to the coolant. The CHF is determined by flow behaviour, especially the turbulence created inside the fuel rod bundle. Adiabatic experiments can be used to characterize the flow behaviour separately from the heat transfer phenomena in diabatic flow. To enhance the turbulence, mixing vanes are attached to spacer grids, which hold the rods in place. The vanes either make the flow swirl around a single sub-channel or induce cross-mixing between adjacent sub-channels. In adiabatic two-phase conditions an important phenomenon that can be investigated is the effect of the spacer on canceling the lift force, which collects the small bubbles to the rod surfaces leading to decreased CHF in diabatic conditions and thus limits the reactor power. Computational Fluid Dynamics (CFD) can be used to simulate the flow numerically and to test how different spacer configurations affect the flow. Experimental data is needed to validate and verify the used CFD models. Especially the modeling of turbulence is challenging even for single-phase flow inside the complex sub-channel geometry. In two-phase flow other factors such as bubble dynamics further complicate the modeling. To investigate the spacer grid effect on two-phase flow, and to provide further experimental data for CFD validation, a series of experiments was run on an adiabatic sub-channel flow loop using a duct-type spacer grid with different configurations. Utilizing the wire-mesh sensor technology, the facility gives high resolution experimental data in both time and space. The experimental results indicate that the duct-type spacer grid is less effective in canceling the lift force effect than the egg-crate type spacer tested earlier.

Bully-victims: Prevalence, psychosocial adjustment, and responsiveness to intervention

In this thesis, a unique subgroup involved in the bullying phenomenon, the bully-victims, are identified and examined. Despite the increasing attention on the bully-victims in recent years, their prevalence, psychosocial adjustment, and response to anti-bullying programs has not been clearly determined. Three empirical studies were conducted in this thesis to examine the prevalence of bully-victims. Moreover, in study I, the psychosocial adjustment of bully-victims was compared with that of pure bullies, pure victims, and non-involved students. In study II, different forms of bullying and victimization were compared among pure bullies, pure victims, bully-victims, and non-involved students. In study III, the effectiveness of anti-bullying programs, in particular, the KiVa program, on bully-victims was demonstrated. Overall, bully-victims formed the smallest group comparing with pure bullies, pure victims, and non-involved students, and in general differed from pure bullies rather than pure victims in terms of subjective experience of maladjustment. They employed more verbal, physical, and cyberbullying perpetration, but not indirect bullying; and they were more victimized by verbal, physical, cyber, and indirect bullying. The KiVa anti-bullying program in Finland is effective in reducing the prevalence of bully-victims.

Effects of Fin Parameters on Gas-Side Heat Transfer Performance of H-Type Finned Tube Bundle in a Waste Heat Recovery Boiler

Alfa Laval Aalborg Oy designs and manufactures waste heat recovery systems utilizing extended surfaces. The waste heat recovery boiler considered in this thesis is a water-tube boiler where exhaust gas is used as the convective heat transfer medium and water or steam flowing inside the tubes is subject to cross-flow. This thesis aims to contribute to the design of waste heat recovery boiler unit by developing a numerical model of the H-type finned tube bundle currently used by Alfa Laval Aalborg Oy to evaluate the gas-side heat transfer performance. The main objective is to identify weaknesses and potential areas of development in the current H-type finned tube design. In addition, numerical simulations for a total of 15 cases with varying geometric parameters are conducted to investigate the heat transfer and pressure drop performance dependent on H-type fin geometry. The investigated geometric parameters include fin width and height, fin spacing, and fin thickness. Comparison between single and double tube type configuration is also conducted. Based on the simulation results, the local heat transfer and flow behaviour of the H-type finned tube is presented including boundary layer development between the fins, the formation of recirculation zone behind the tubes, and the local variations of flow velocity and temperature within the tube bundle and on the fin surface. Moreover, an evaluation of the effects of various fin parameters on heat transfer and pressure drop performance of H-type finned tube bundle has been provided. It was concluded that from the studied parameters fin spacing and fin width had the most significant effect on tube bundle performance and the effect of fin thickness was the least important. Furthermore, the results suggested that the heat transfer performance would increase due to enhanced turbulence if the current double tube configuration is replaced with single tube configuration, but further investigation and experimental measurements are required in order to validate the results.