Den nya Star-Rugby-automobilen

14 x 10 cm

Uusi Star-Rugby-auto

14 x 10 cm

"Star" 4-personers Touring

kuv., 21 x 14 cm

"Star" 4-hengen Touring

kuv., 21 x 14 cm

Modeling and Parameter Estimation of Double-Star Permanent Magnet Synchronous Machines

The power rating of wind turbines is constantly increasing; however, keeping the voltage rating at the low-voltage level results in high kilo-ampere currents. An alternative for increasing the power levels without raising the voltage level is provided by multiphase machines. Multiphase machines are used for instance in ship propulsion systems, aerospace applications, electric vehicles, and in other high-power applications including wind energy conversion systems. A machine model in an appropriate reference frame is required in order to design an efficient control for the electric drive. Modeling of multiphase machines poses a challenge because of the mutual couplings between the phases. Mutual couplings degrade the drive performance unless they are properly considered. In certain multiphase machines there is also a problem of high current harmonics, which are easily generated because of the small current path impedance of the harmonic components. However, multiphase machines provide special characteristics compared with the three-phase counterparts: Multiphase machines have a better fault tolerance, and are thus more robust. In addition, the controlled power can be divided among more inverter legs by increasing the number of phases. Moreover, the torque pulsation can be decreased and the harmonic frequency of the torque ripple increased by an appropriate multiphase configuration. By increasing the number of phases it is also possible to obtain more torque per RMS ampere for the same volume, and thus, increase the power density. In this doctoral thesis, a decoupled d–q model of double-star permanent-magnet (PM) synchronous machines is derived based on the inductance matrix diagonalization. The double-star machine is a special type of multiphase machines. Its armature consists of two three-phase winding sets, which are commonly displaced by 30 electrical degrees. In this study, the displacement angle between the sets is considered a parameter. The diagonalization of the inductance matrix results in a simplified model structure, in which the mutual couplings between the reference frames are eliminated. Moreover, the current harmonics are mapped into a reference frame, in which they can be easily controlled. The work also presents methods to determine the machine inductances by a finite-element analysis and by voltage-source inverters on-site. The derived model is validated by experimental results obtained with an example double-star interior PM (IPM) synchronous machine having the sets displaced by 30 electrical degrees. The derived transformation, and consequently, the decoupled d–q machine model, are shown to model the behavior of an actual machine with an acceptable accuracy. Thus, the proposed model is suitable to be used for the model-based control design of electric drives consisting of double-star IPM synchronous machines.

Genesis and Evolution of Brittle Structures In Southwestern Finland and Western South Africa. Insights into Fault Reactivation, Fluid Flow and Structural Maturity in Precambrian Cratons

The bedrock of old crystalline cratons is characteristically saturated with brittle structures formed during successive superimposed episodes of deformation and under varying stress regimes. As a result, the crust effectively deforms through the reactivation of pre-existing structures rather than by through the activation, or generation, of new ones, and is said to be in a state of 'structural maturity'. By combining data from Olkiluoto Island, southwestern Finland, which has been investigated as the potential site of a deep geological repository for high-level nuclear waste, with observations from southern Sweden, it can be concluded that the southern part of the Svecofennian shield had already attained structural maturity during the Mesoproterozoic era. This indicates that the phase of activation of the crust, i.e. the time interval during which new fractures were generated, was brief in comparison to the subsequent reactivation phase. Structural maturity of the bedrock was also attained relatively rapidly in Namaqualand, western South Africa, after the formation of first brittle structures during Neoproterozoic time. Subsequent brittle deformation in Namaqualand was controlled by the reactivation of pre-existing strike-slip faults.In such settings, seismic events are likely to occur through reactivation of pre-existing zones that are favourably oriented with respect to prevailing stresses. In Namaqualand, this is shown for present day seismicity by slip tendency analysis, and at Olkiluoto, for a Neoproterozoic earthquake reactivating a Mesoproterozoic fault. By combining detailed field observations with the results of paleostress inversions and relative and absolute time constraints, seven distinctm superimposed paleostress regimes have been recognized in the Olkiluoto region. From oldest to youngest these are: (1) NW-SE to NNW-SSE transpression, which prevailed soon after 1.75 Ga, when the crust had sufficiently cooled down to allow brittle deformation to occur. During this phase conjugate NNW-SSE and NE-SW striking strike-slip faults were active simultaneous with reactivation of SE-dipping low-angle shear zones and foliation planes. This was followed by (2) N-S to NE-SW transpression, which caused partial reactivation of structures formed in the first event; (3) NW-SE extension during the Gothian orogeny and at the time of rapakivi magmatism and intrusion of diabase dikes; (4) NE-SW transtension that occurred between 1.60 and 1.30 Ga and which also formed the NW-SE-trending Satakunta graben located some 20 km north of Olkiluoto. Greisen-type veins also formed during this phase. (5) NE-SW compression that postdates both the formation of the 1.56 Ga rapakivi granites and 1.27 Ga olivine diabases of the region; (6) E-W transpression during the early stages of the Mesoproterozoic Sveconorwegian orogeny and which also predated (7) almost coaxial E-W extension attributed to the collapse of the Sveconorwegian orogeny. The kinematic analysis of fracture systems in crystalline bedrock also provides a robust framework for evaluating fluid-rock interaction in the brittle regime; this is essential in assessment of bedrock integrity for numerous geo-engineering applications, including groundwater management, transient or permanent CO2 storage and site investigations for permanent waste disposal. Investigations at Olkiluoto revealed that fluid flow along fractures is coupled with low normal tractions due to in-situ stresses and thus deviates from the generally accepted critically stressed fracture concept, where fluid flow is concentrated on fractures on the verge of failure. The difference is linked to the shallow conditions of Olkiluoto - due to the low differential stresses inherent at shallow depths, fracture activation and fluid flow is controlled by dilation due to low normal tractions. At deeper settings, however, fluid flow is controlled by fracture criticality caused by large differential stress, which drives shear deformation instead of dilation.

Elokuva Internetissä : katsaus elokuvaan verkossa sekä suunnitelma Uhripuu-elokuvan julkaisemisesta

Opinnäytetyössäni tarkastellaan Internet-elokuvan historiaa sekä nykyistä tilaa. Käyn läpi yleisimmät katseluohjelmat: QuickTime Player, Windows Media Player, RealPlayer ja Flash Player sekä Internet-elokuvasivustot: YouTube, IFILM, AtomFilm ja Pixoff.net. Kerron myös Flash-elokuvista ja siitä miten Internet on luonut kokonaan uuden elokuvan muodon sekä Internetissä julkaistuista Dogma 2001 The New Rules for Internet Cinema -säännöistä. Käsittelen myös lyhyesti miten Internet-elokuva on vaikuttanut perinteiseen elokuvaan. Käsittelen perinteisen, isolta ruudulta katsottavaksi tehdyn, elokuvan julkaisemista Internetissä. Tarkastelen kahta verkossa julkaistua elokuvaa: Star Wreck ja The Silent City ja käyn läpi miksi ne on julkaistu Internetissä. Star Wreck on tamperelainen poikkeuksellisen kunnianhimoinen amatööriprojekti. The Silent City on taas irlantilaisen 3D-animaattorin, Ruairi Robinsonin, lyhytelokuva, jonka hän on tehnyt työnäytteeksi Hollywoodiin. Käsittelen myös ohjaaja David Lynchin verkkosivut, koska ne ovat Internetissä ainoaa laatuaan ja mainio ympäristö elokuvan julkaisemiseen. Kerron oman Uhripuu-kauhuelokuvani synnystä ja tekoprosessista. Uhripuun idea sai alkunsa Iso-Britanniassa vuoden 2004 alussa. Käsikirjoitus sai lopullisen muotonsa keväällä 2006. Käsittelen miksi ja miten se julkaistaan Internetissä. Kerron elokuvan Internet-sivujen sisällöstä ja sen jaosta eri osiin: Tarina, Rooleissa, Tekijät, Uhripuista, Traileri, Näin tehtiin, Kuvagalleria, E-kortti, Näe/Katso elokuva. Koska olen saanut koulutukseni nimenomaan verkkoviestinnän enkä audiovisuaalisen viestinnän puolella, Uhripuu-elokuvan tekoprosessi on ollut minulle elokuvakoulu. Sen tekemisen aikana olen oppinut elokuvan tekemisestä paljon. Elokuva kuvattiin HD-tarkkuuksilla, jotta kuva ei kärsisi liikaa jälkikäsittelyssä. Mitä tulee elokuvan ja Internetin yhteiseen tulevaisuuteen, näyttää siltä, että nämä kaksi mediaa ovat yhdistymässä yhä enemmän toisiinsa.

PK-yritysten teknologiahankkeiden arvioiminen reaalioptioajattelun avulla

Tutkielman tavoitteena oli pyrkiä selvittämään kuinka hyvin reaalioptioajattelu soveltuu pienten ja keskisuurten yritysten teknologiahankkeiden arvioimiseen. Tutkimusvälineenä käytettiin reaalioptioajattelun mukaista Star-teknologian arviointilomaketta. Tutkimukseen saatiin mukaan 17 teknologiayrityksen vastaukset, joita sitten arvioitiin kvalitatiivisin ja kvantitatiivisin menetelmin. Teknologiahankkeisiin sisältyy usein suurta teknologista epävarmuutta sekä markkinaepävarmuutta. Reaalioptioajattelu soveltuu erinomaisesti teknologiahankkeiden arvioimiseen, sillä siinä korostetaan joustavuutta ja sen avulla voidaan pyrkiä hallitsemaan epävarmuuksia. Tutkimuksessa esiteltävä Starã-prosessi voi oikein ja huolellisesti käytettynä antaa teknologiahankkeesta uutta ja monipuolista näkökulmaa ja helpottaa näin päätöksentekoa. Uuden informaation avulla hanketta voidaan arvioida ja ohjata tehokkaammin.

The Sottunga-Jurmo shear zone : structure and deformation history of a crustal-scale ductile shear zone in SW Finland

The aim of this study is to gain a better understanding of the structure and the deformation history of a NW-SE trending regional, crustal-scale shear structure in the Åland archipelago, SW Finland, called the Sottunga-Jurmo shear zone (SJSZ). Approaches involving e.g. structural geology, geochronology, geochemistry and metamorphic petrology were utilised in order to reconstruct the overall deformation history of the study area. The study therefore describes several features of the shear zone including structures, kinematics and lithologies within the study area, the ages of the different deformation phases (ductile to brittle) within the shear zone, as well as some geothermobarometric results. The results indicate that the SJSZ outlines a major crustal discontinuity between the extensively migmatized rocks NE of the shear zone and the unmigmatised, amphibolite facies rocks SW of the zone. The main SJSZ shows overall dextral lateral kinematics with a SW-side up vertical component and deformation partitioning into pure shear and simple shear dominated deformation styles that was intensified toward later stages of the deformation history. The deformation partitioning resulted in complex folding and refolding against the SW margin of the SJSZ, including conical and sheath folds, and in a formation of several minor strike-slip shear zones both parallel and conjugate to the main SJSZ in order to accommodate the regional transpressive stresses. Different deformation phases within the study area were dated by SIMS (zircon U-Pb), ID-TIMS (titanite U-Pb) and 40Ar/39Ar (pseudotachylyte wholerock) methods. The first deformation phase within the ca. 1.88 Ga rocks of the study area is dated at ca. 1.85 Ga, and the shear zone was reactivated twice within the ductile regime (at ca. 1.83 Ga and 1.79 Ga), during which the strain was successively increasingly partitioned into the main SJSZ and the minor shear zones. The age determinations suggest that the orogenic processes within the study area did not occur in a temporal continuum; instead, the metamorphic zircon rims and titanites show distinct, 10-20 Ma long breaks in deformation between phases of active deformation. The results of this study further imply slow cooling of the rocks through 600-700ºC so that at 1.79 Ga, 2 the temperature was still at least 600ºC. The highest recorded metamorphic pressures are 6.4-7.1 kbar. At the late stages or soon after the last ductile phase (ca. 1.79 Ga), relatively high-T mylonites and ultramylonites were formed, witnessing extreme deformation partitioning and high strain rates. After the rocks reached lower amphibolite facies to amphibolite-greenschist facies transitional conditions (ca. 500-550ºC), they cooled rapidly, probably due to crustal uplift and exhumation. The shear zone was reactivated at least once within the semi-brittle to brittle regime between ca. 1.79 Ga and 1.58 Ga, as evidenced by cataclasites and pseudotachylytes. In summary, the results of this study suggest that the Sottunga-Jurmo shear zone (and the South Finland shear zone) defines a major crustal discontinuity, and played a central role in accommodating the regional stresses during and after the Svecofennian orogeny.

Tehdasmittausten varastointi moniulotteisella tietomallilla

Tietovarastoissa moniulotteinen tietomalli on tehokkain tapa esittää tietoa päätöksentekijöille. Sen toimivuus on hyväksi havaittu monissa eri liiketoimintaympäristöissä. Tehdasympäristöissä on tuhansia mittalaitteita, joista jokainen mittaa uniikkia valmistusprosessiin liittyvää piirrettä. Tässä työssä kehitettiin tietovarasto tehdasmittausten varastointiin käyttäen moniulotteista tietomallia. Havaittiin, että moniulotteisella mallilla tehdasmittaukset voidaan tallentaa joustavalla tavalla ja esittää käyttäjälle mielekkäässä muodossa. Moniulotteinen malli antaa myös erinomaiset keinot tiedon ryhmittelyyn ja vertailuun. Sillä ei kuitenkaan saada vastaavanlaisia hyötyjä kuin klassisissa kaupanalan tietovarastointi esimerkeissä, koska eri mittaukset ovat keskenään hyvin erilaisia. Vaikka mittaukset eivät olekaan aina vertailtavissa tai summattavissa keskenään, saadaan ne moniulotteisella mallilla tallennettua ja luokiteltua loogisesti siten, että käyttäjän on helppo löytää tarvitsemansa tieto. Lisäksi yleisesti tunnettu ja paljon käytetty tietovaraston suunnittelumalli takaa sen, että markkinoilta on saatavissa työkaluja tietovaraston käyttöön. Tietokannan toteutus tehtiin vapaasti levitettävän MySQLtiedonhallintajärjestelmän avulla. Sitä ei ole suunniteltu pääasiassa tietovarastokäyttöön, mutta halpa lisenssi ja hyvä skaalautuvuus tekevät siitä mielenkiintoisen vaihtoehdon. Sitä onkin käytetty luultua enemmän tietovarastoinnissa ja myös monien nimekkäiden organisaatioiden toimesta. Myös tässä työssä todettiin, että MySQL tarjoaa riittävät välineet tietovaraston kehittämiseen.