24 resultados para Automatic adjustment
em Doria (National Library of Finland DSpace Services) - National Library of Finland, Finland
Resumo:
Selostus: Maassa olevan nitraattitypen arviointi simulointimallin avulla
Resumo:
Abstract
Resumo:
Perustaen tutkimuksen kansainvälisen sopeutumisen teoreettiselle rungolle täydentäen sitä sosiaalisen pääoman teorialla, tämä tutkielma tutkii kuinka johtoasemassa oleva ulkosuomalainen luo hyvin toimivan sosiaalisen verkoston hong kongilaisella työpaikallansa. Tutkielma lähestyy aihetta Nahapietin ja Ghoshalin (1998) kehittämän sosiaalisen pääoman kolmen ulottuvuuden mallin avulla. Tutkielmassa kirjallisuudesta haettua teoriaa käytetään tutkimustavarten tehtyjen haastattelujen analysointiapuna. Tutkimalla sosiaalista pääomaa, kansainvälisen sopeutumisen kirjallisuutta, ekspatriootin perinteisiä menestystekijöitä ja guanxia (kiinalaisten henkilökohtaisia siteitä) tämän tutkimuksen teoriaosuus implikoi, että sosiaalisella pääomalla tulisi olla täydentävä rooli kansainvälisen sopeutumisen kirjallisuudessa. Sosiaalisen pääoman kolmen ulottuvuuden mallia käytetään pohjana empiirisen datan analysointiin. Tutkielman empiiriset tulokset osoittavat, että työpaikan sosiaaliseen verkostoon sopeutuminen liittyy exspatriootin kykyyn käsitellä estäviä ja mahdollistajia sosiaalisen pääoman luontiin vaikuttavia tekijöitä. Lisäksi sopeutuminen vaatii exspatriootin tunnistavan kohdemaalle tyypillisiä exspatriootin menestystekijöitä ja ekspatriootinomia tärkeitä henkilökohtaisia ominaisuuksia.
Resumo:
In liberalized electricity markets, which have taken place in many countries over the world, the electricity distribution companies operate in the competitive conditions. Therefore, accurate information about the customers’ energy consumption plays an essential role for the budget keeping of the distribution company and for correct planning and operation of the distribution network. This master’s thesis is focused on the description of the possible benefits for the electric utilities and residential customers from the automatic meter reading system usage. Major benefits of the AMR, illustrated in the thesis, are distribution network management, power quality monitoring, load modelling, and detection of the illegal usage of the electricity. By the example of the power system state estimation, it was illustrated that even the partial installation of the AMR in the customer side leads to more accurate data about the voltage and power levels in the whole network. The thesis also contains the description of the present situation of the AMR integration in Russia.
Resumo:
In the modern warfare there is an active development of a new trend connected with a robotic warfare. One of the critical elements of robotics warfare systems is an automatic target recognition system, allowing to recognize objects, based on the data received from sensors. This work considers aspects of optical realization of such a system by means of NIR target scanning at fixed wavelengths. An algorithm was designed, an experimental setup was built and samples of various modern gear and apparel materials were tested. For pattern testing the samples of actively arm engaged armies camouflages were chosen. Tests were performed both in clear atmosphere and in the artificial extremely humid and hot atmosphere to simulate field conditions.
Resumo:
The skill of programming is a key asset for every computer science student. Many studies have shown that this is a hard skill to learn and the outcomes of programming courses have often been substandard. Thus, a range of methods and tools have been developed to assist students’ learning processes. One of the biggest fields in computer science education is the use of visualizations as a learning aid and many visualization based tools have been developed to aid the learning process during last few decades. Studies conducted in this thesis focus on two different visualizationbased tools TRAKLA2 and ViLLE. This thesis includes results from multiple empirical studies about what kind of effects the introduction and usage of these tools have on students’ opinions and performance, and what kind of implications there are from a teacher’s point of view. The results from studies in this thesis show that students preferred to do web-based exercises, and felt that those exercises contributed to their learning. The usage of the tool motivated students to work harder during their course, which was shown in overall course performance and drop-out statistics. We have also shown that visualization-based tools can be used to enhance the learning process, and one of the key factors is the higher and active level of engagement (see. Engagement Taxonomy by Naps et al., 2002). The automatic grading accompanied with immediate feedback helps students to overcome obstacles during the learning process, and to grasp the key element in the learning task. These kinds of tools can help us to cope with the fact that many programming courses are overcrowded with limited teaching resources. These tools allows us to tackle this problem by utilizing automatic assessment in exercises that are most suitable to be done in the web (like tracing and simulation) since its supports students’ independent learning regardless of time and place. In summary, we can use our course’s resources more efficiently to increase the quality of the learning experience of the students and the teaching experience of the teacher, and even increase performance of the students. There are also methodological results from this thesis which contribute to developing insight into the conduct of empirical evaluations of new tools or techniques. When we evaluate a new tool, especially one accompanied with visualization, we need to give a proper introduction to it and to the graphical notation used by tool. The standard procedure should also include capturing the screen with audio to confirm that the participants of the experiment are doing what they are supposed to do. By taken such measures in the study of the learning impact of visualization support for learning, we can avoid drawing false conclusion from our experiments. As computer science educators, we face two important challenges. Firstly, we need to start to deliver the message in our own institution and all over the world about the new – scientifically proven – innovations in teaching like TRAKLA2 and ViLLE. Secondly, we have the relevant experience of conducting teaching related experiment, and thus we can support our colleagues to learn essential know-how of the research based improvement of their teaching. This change can transform academic teaching into publications and by utilizing this approach we can significantly increase the adoption of the new tools and techniques, and overall increase the knowledge of best-practices. In future, we need to combine our forces and tackle these universal and common problems together by creating multi-national and multiinstitutional research projects. We need to create a community and a platform in which we can share these best practices and at the same time conduct multi-national research projects easily.
Resumo:
Diabetes is a rapidly increasing worldwide problem which is characterised by defective metabolism of glucose that causes long-term dysfunction and failure of various organs. The most common complication of diabetes is diabetic retinopathy (DR), which is one of the primary causes of blindness and visual impairment in adults. The rapid increase of diabetes pushes the limits of the current DR screening capabilities for which the digital imaging of the eye fundus (retinal imaging), and automatic or semi-automatic image analysis algorithms provide a potential solution. In this work, the use of colour in the detection of diabetic retinopathy is statistically studied using a supervised algorithm based on one-class classification and Gaussian mixture model estimation. The presented algorithm distinguishes a certain diabetic lesion type from all other possible objects in eye fundus images by only estimating the probability density function of that certain lesion type. For the training and ground truth estimation, the algorithm combines manual annotations of several experts for which the best practices were experimentally selected. By assessing the algorithm’s performance while conducting experiments with the colour space selection, both illuminance and colour correction, and background class information, the use of colour in the detection of diabetic retinopathy was quantitatively evaluated. Another contribution of this work is the benchmarking framework for eye fundus image analysis algorithms needed for the development of the automatic DR detection algorithms. The benchmarking framework provides guidelines on how to construct a benchmarking database that comprises true patient images, ground truth, and an evaluation protocol. The evaluation is based on the standard receiver operating characteristics analysis and it follows the medical practice in the decision making providing protocols for image- and pixel-based evaluations. During the work, two public medical image databases with ground truth were published: DIARETDB0 and DIARETDB1. The framework, DR databases and the final algorithm, are made public in the web to set the baseline results for automatic detection of diabetic retinopathy. Although deviating from the general context of the thesis, a simple and effective optic disc localisation method is presented. The optic disc localisation is discussed, since normal eye fundus structures are fundamental in the characterisation of DR.
Resumo:
A district heating system comprises production facilities, a distribution network, and heat consumers. The utilization of new energy metering and reading system (AMR) is increasing constantly in district heating systems. This heuristic study shows how the AMR system can be exploited in finding optimization opportunities in district heating system. In this study, the district heating system is mainly considered from the viewpoint of operational optimization. The focus is on the core processes, heat production and distribution. Three objectives were set to this study. The first one was to examine general optimization opportunities in district heating systems. Second, to figure out the benefits of AMR for general optimization opportunities. Finally, to define a methodology for process improvement endeavors. This study shows, through a case study, the usefulness of AMR in specifying current deficiencies in a district heating system. Based on a literature review, the methodology for the improvement of business processes is presented. Additionally, some issues related to future competitiveness of district heating are concerned. As a conclusion, some optimization objectives are considered more desirable than others. Study shows that AMR is useful in the specification of optimization targets in the district heating system. Further steps in optimization process were not examined in detail. That would seem to be interesting topic for further studies.
Resumo:
Centrifugal pumps are a notable end-consumer of electrical energy. Typical application of a centrifugal pump is the filling or emptying of a reservoir tank, where the pump is often operated at a constant speed until the process is completed. Installing a frequency converter to control the motor substitutes the traditional fixed-speed pumping system, allows the optimization of rotational speed profile for the pumping tasks and enables the estimation of rotational speed and shaft torque of an induction motor without any additional measurements from the motor shaft. Utilization of variable-speed operation provides the possibility to decrease the overall energy consumption of the pumping task. The static head of the pumping process may change during the pumping task. In such systems, the minimum rotational speed changes during reservoir filling or emptying, and the minimum energy consumption can’t be achieved with a fixed rotational speed. This thesis presents embedded algorithms to automatically identify, optimize and monitor pumping processes between supply and destination reservoirs, and evaluates the changing static head –based optimization method.
Resumo:
The general trend towards increasing e ciency and energy density drives the industry to high-speed technologies. Active Magnetic Bearings (AMBs) are one of the technologies that allow contactless support of a rotating body. Theoretically, there are no limitations on the rotational speed. The absence of friction, low maintenance cost, micrometer precision, and programmable sti ness have made AMBs a viable choice for highdemanding applications. Along with the advances in power electronics, such as signi cantly improved reliability and cost, AMB systems have gained a wide adoption in the industry. The AMB system is a complex, open-loop unstable system with multiple inputs and outputs. For normal operation, such a system requires a feedback control. To meet the high demands for performance and robustness, model-based control techniques should be applied. These techniques require an accurate plant model description and uncertainty estimations. The advanced control methods require more e ort at the commissioning stage. In this work, a methodology is developed for an automatic commissioning of a subcritical, rigid gas blower machine. The commissioning process includes open-loop tuning of separate parts such as sensors and actuators. The next step is to apply a system identi cation procedure to obtain a model for the controller synthesis. Finally, a robust model-based controller is synthesized and experimentally evaluated in the full operating range of the system. The commissioning procedure is developed by applying only the system components available and a priori knowledge without any additional hardware. Thus, the work provides an intelligent system with a self-diagnostics feature and an automatic commissioning.
Resumo:
Ride comfort of elevators is one of the quality criteria valued by customers. The objective of this master’s thesis was to develop a process to measure the ride comfort of automatic elevator doors. The door’s operational noise was chosen as a focus area and other kinds of noise for example caused by pressure differences in the elevator shaft were excluded. The thesis includes a theory part and an empirical part. In the first part theories of quality management, measuring of quality and acoustics are presented. In the empirical part the developed ride comfort measuring process is presented, different operational noise sources are analyzed and an example is presented of how this measuring process can be used to guide product development. To measure ride comfort a process was developed where a two-room silent room was used as a measuring environment and EVA-625 device was used in the actual measuring of door noise. A-weighted decibels were used to scale noise pressure levels and the door movement was monitored with an accelerometer. This enabled the connection between the noise and noise sources which in turn helped to find potential ride comfort improvement ideas. The noise isolation class was also measured with the Ivie-measuring system. Measuring of door ride comfort gives feedback to product development and to managing current product portfolio. Measuring enables the continuous improvement of elevator door ride comfort. The measuring results can also be used to back up marketing arguments for doors.
Resumo:
People make up one of the most important resources for a corporation and therefore it has to continuously seek an ever more diverse and international workforce. Inpatriation is another way of utilizing foreign expertise in a corporation. An inpatriate refers to a person that is on an international assignment at the headquarters of a corporation, where they have been sent either from a subsidiary abroad or from a third country outside the corporation. Strengthening the social network of the inpatriate and their family contributes to the adjustment process and furthermore the success of the work assignment. As social networking sites are currently the fastest developing personal networking tools in the world, it is interesting to see how they can help in inpatriate adjustment. The objective of this thesis is to explore the potential of social networking sites (SNS) in inpatriate adjustment. The main objective can be divided into three sub objectives: 1. What is SNS used for during the inpatriate assignment? 2. What are the inpatriates’ motivations to use SNS? 3. Could the three facets of adjustment (work, interaction and general) be gained through SNS? This qualitative study utilizes the theme interview data collection method and the thematic analysis approach for analysing the interview data. From the interviews with five Indian inpatriates in Finland the most mentioned uses of SNS were related to participating (sharing opinions, recommendations and discussing things and connecting to friends, family and colleagues) and consuming (collecting information for work and free time), the least mentioned use of SNS was producing (posting videos, photos and updates). An interesting finding was that the five interviewees did not use SNS for purely entertainment motives at all during their assignment. This thesis found that all three facets of adjustment could potentially be gained through SNS.
Resumo:
To manage foreign operations, companies must often send their employees on international assignments. Repatriating these expatriates can be difficult because they have been forgotten during their posting, and their new experiences are not utilised. In addition to the possible difficulties in organisational repatriation, the returnee can suffer from readjustment problems after a lengthy stay abroad has changed their habits and even identity. This thesis examines the repatriation experience of Finnish assignees returning from Russia. The purpose of the study is to understand how the repatriation experience influences their readjustment to work in Finland. This experience is influenced by many factors including personal and situational changes, the repatriation process, job and organisational factors, and individual’s motives. The theoretical background of the study is founded on two models of repatriation adjustment. A refined, holistic theoretical framework for the study is created. It describes the formation of the repatriation experience and its importance for readjustment to work and retention. The qualitative research approach is suitable for the thesis which examines the returnees’ personal experiences and feelings: a qualitative case study aims to explain the phenomenon in-depth and comprehensively. The data was collected in summer 2013 through semi-standardised interviews with eight Finnish repatriates. They had returned from Russia within the last two years. The data was analysed by structuring the interview transcripts using template analysis. The results supported earlier literature and suggest that the re-entry remains a challenging phase for both the individual and the company. For some, adjusting to a new job was difficult for various reasons. The repatriates underwent personal change and development and felt it was for the better. Many repatriates criticised the company’s repatriation process upon return. Finding a suitable return job was not clear. Instead, the returnees had to be active in finding a new position. Many assignees had only modest career-related motives regarding the assignment and they had realistic expectations about the return. Therefore they were not extremely surprised or dissatisfied when they were not actively offered positions or support by the company. The significance of motives stood out even more than the theory predicted. As predicted, they are linked to the expectations of employees. Moreover, if the employees are motivated to remain in the company, they can tolerate partly a negative repatriation experience. Despite the complexity of the return and readjustment, the assignment as a whole was seen as a rewarding experience by all participants.