7 resultados para Authority Files
em Doria (National Library of Finland DSpace Services) - National Library of Finland, Finland
Resumo:
Tässä luomistyössä on esitetty tutkimus informaation suojaamisen menetelmien osalta paikallisissa ja ryhmäkuntaisissa verkoissa. Tutkimukseen kuuluu nykyaikaisten kryptagraafisten järjestelmien, Internetin/Intranetin ohjelmointikeinojen ja pääsyoikeuksien jakelumenetelmien analyysi. Tutkimusten perusteella on laadittu ohjelmiston prototyyppi HTML-tiedostojen suojaamista varten. Ohjelmiston laatimisprosessi on sisältänyt vaatimusten, järjestelmän ja suojelukomponenttien suunnittelun ja protytyypin testauksen. Ohjelmiston realisoinnin jälkeen kirjoitettiin käyttöohjeet. Ohjelmiston prototyyppi suojaa informaatiota HTML-tiedoston koko käytön aikana ja eri yrityksissä voidaan käyttää sitä pienien laajennuksien jälkeen.
Resumo:
Uusi patoturvallisuuslaki (494/2009) tuli voimaan 1.10.2009 ja valtioneuvoston asetus patoturvallisuudesta (319/2010) 5.5.2010. Tämä patoturvallisuusopas korvaa patoturvallisuusohjeet (MMM:n julkaisuja 7/1997), jotka poistuivat käytöstä 1.10.2009. Patoturvallisuusoppaassa esitetty ei ole padon omistajaa sitovaa, vaan oppaan tarkoitus on täydentää ja selventää esimerkein ja selostuksin laissa ja asetuksessa esitettyä. Oppaassa käsitellään padon suunnittelua kuten hydrologista mitoitusta ja padon teknisiä turvallisuusvaatimuksia, padon rakentamista ja käyttöönottoa sekä vahingonvaaraselvitystä, padon omistajan turvallisuussuunnitelmaa sekä padon kunnossapitoa, käyttöä, tarkkailua, vuosi- ja määräaikaistarkastuksia. Padot luokitellaan vahingonvaaran perusteella luokkiin 1, 2 ja 3. Luokittelua ei tarvitse kuitenkaan tehdä, jos patoturvallisuusviranomainen katsoo, että padosta ei aiheudu vaaraa. Jokaiselle luokitellulle padolle on padon omistajan laadittava tarkkailuohjelma, jonka patoturvallisuusviranomainen hyväksyy päätöksellään. Padosta aiheutuvan vahingonvaaran selvittämiseksi 1-luokan padon omistajan on laadittava vahingonvaaraselvitys padosta ihmisille, omaisuudelle ja ympäristölle aihetuvasta vahingonvaarasta. Myös muusta kuin 1-luokan padosta voi patoturvallisuusviranomainen määrätä tehtäväksi vahingonvaaraselvityksen luokittelua varten. Padon omistajan on laadittava 1-luokan padolle turvallisuussuunnitelma onnettomuus- ja häiriötilanteiden varalle. Suunnitelmassa esitetään padon omistajan omatoiminen varautuminen em. tilanteiden varalle. Pelastusviranomainen arvioi tapauskohtaisesti pelastuslain mukaisen suunnitelman laatimistarpeen. Padon omistajan on toimitettava patoturvallisuusviranomaiselle tietojärjestelmään vietäväksi patoturvallisuusasetuksessa mainitut tiedot. Patoturvallisuusviranomaisen ja padon omistajan on säilytettävä kustakin luokitellusta padosta ajantasaiset tulosteet tietojärjestelmästä sekä muut padon turvallisuuden kannalta tärkeät asiakirjat patoturvallisuuskansiossa siten, että ne ovat mahdollisissa häiriötilanteissa nopeasti saatavilla.
Resumo:
Tässä diplomityössä on esitetty työn yhteydessä toteutetun Serpent-ARES-laskentaketjun muodostamiseksi tarvittavat toimenpiteet. ARES-reaktorisydän-simulaattorissa tarvittavien homogenisoitujen ryhmävakiokirjastojen muodostaminen Serpentiä käyttäen tekee laskentaketjusta muiden käytössä olevien reaktorisydämen laskentaketjujen mahdollisista virhelähteistä riippumattoman. Monte Carlo-laskentamenetelmään perustuvaa reaktorifysiikan laskentaohjelmaa käyttämällä ryhmävakiokirjastot muodostetaan uudella menetelmällä ja näin saadaan viranomaiskäyttöön voimayhtiöiden käyttämistä menetelmistä riippumaton laskentaketju reaktorien turvallisuusmarginaalien laskentaan. Työn yhteydessä muodostetun laskentaketjun ja tehtyjen vaikutusalakirjastojen muodostamisrutiinien sekä parametrisovitteiden toimivuus on todettu laskemalla Olkiluoto 3 - reaktorin alkulatauksen säätösauvojen tehokkuuksia ja sammutusmarginaaleja eri olosuhteissa. Menetelmä on todettu toimivaksi parametrien pätevyysalueella ja saadut laskentatulokset ovat oikeaa suuruusluokkaa. Parametrimallin tarkkuutta ja pätevyysaluetta on syytä vielä kehittää, ennen kuin laskentaketjua voidaan käyttää varmentamaan muilla menetelmillä laskettujen tulosten oikeellisuutta.
Resumo:
A new Dam Safety Act (494/2009) came into force on 1st October 2009 and a Government Decree on Dam Safety (319/2010) on 5th May 2010. This Dam Safety Guide replaces the Dam Safety Code of Practice (Publication of the Ministry of Agriculture and Forestry 7/1997), removed from circulation on 1st October 2009. The Dam Safety Guide is not binding on the dam owner; the purpose is to complement and elucidate the relevant law and and decree through examples and descriptions. The Guide takes up questions concerning dam design, for instance hydrological dimensioning and technical safety requirements, dam construction and use, the dam break hazard analysis and the dam owner’s emergency action plan, maintenance, use, monitoring as well as the annual and periodic inspections. Dams are classified according to the hazard they pose into class 1, 2 or 3 dams. The classification is not needed, if, according to the dam safety authority, the dam poses no danger. The owner of a classified dam must prepare a monitoring programme, to be approved by decision of the dam safety authority. To establish the hazard caused by a dam, the owner of a class 1 dam must prepare an analysis of the dam hazard to humans and property as well as to the environment. The dam safety authority may also require a dam break hazard analysis for a dam other than class 1 dam if deemed necessary for classification. The owner of a class 1 dam must prepare a plan of measures in case of emergency or operational failure. The plan shall present the dam owner’s state of preparedness to act on their own initiative in the situations described above. In each case, the rescue authorities make a separate assessment for the need to prepare a plan as set out in the Rescue Act. The dam owner must provide the information specified in the Dam Safety Decree to be entered into the dam safety information system. The dam safety authority and the owner of the dam must keep up-to-date printouts in their own dam safety files from the information system for each dam as well as other important documents connected with dam safety to ensure that these are readily available in case of disturbance.
Resumo:
The purpose of this study was to find out how a software company can successfully expand business to the Danish software market through distribution channel. The study was commissioned by a Finnish software company and it was conducted using a qualitative research method by analyzing external and internal business environment, and interviewing Danish ICT organizations and M-Files personnel. Interviews were semi-structured interviews, which were designed to collect comprehensive information on the existing ICT and software market in Denmark. The research used three external and internal analyzing frameworks; PEST analysis (market level), Porter´s Five Force analysis (industry level competition) and SWOT analysis (company level). Distribution channels theory was a base to understand why and what kind of distribution channels the case company uses, and what kind of channels target markets companies’ uses. Channel strategy and design were integrated to the industry level analysis. The empirical findings revealed that Denmark has very business friendly ICT environment. Several organizations have ranked Denmark´s information and communication technology as the best in the world. Denmark’s ICT and software market are relatively small, compared to many other countries in Europe. Danish software market is centralized. Largest software clusters are in the largest cities; Copenhagen, Aarhus, Odense and Aalborg. From these clusters, software companies can most likely find suitable resellers. The following growing trends are clearly seen in the software market: mobile and wireless applications, outsourcing, security solutions, cloud computing, social business solutions and e-business solutions. When expanding software business to the Danish market, it is important to take into account these trends. In Denmark distribution channels varies depending on the product or service. For many, a natural distribution channel is a local partner or internet. In the public sector solutions are purchased through a public procurement process. In the private sector the buying process is more straight forwarded. Danish companies are buying software from reliable suppliers. This means that they usually buy software direct from big software vendors or local partners. Some customers prefer to use professional consulting companies. These consulting companies can strongly influence on the selection of the supplier and products, and in this light, consulting companies can be important partners for software companies. Even though the competition is fierce in ECM and DMS solutions, Danish market offers opportunities for foreign companies. Penetration to the Danish market through reseller channel requires advanced solutions and objective selection criteria for channel partners. Based on the findings, Danish companies are interested in advanced and efficient software solutions. Interest towards M-Files solutions was clearly seen and the company has excellent opportunity to expand business to the Danish market through reseller channel. Since the research explored the Danish ICT and software market, the results of the study may offer valuable information also to the other software companies which are expanding their business to the Danish market.