Vuorineuvos Tapio Koski 17/4 1974

Kirje 17.4.1974

The effect of oxygen delignification on fiber properties in kraft pulp production - a review

Fiber damages comprise fiber deformations, characterized as fiber curl, kink, dislocations and strength losses as well as some yet unidentified factors. This recently discovered phenomenon is especially evident in mill scale kraftpulps. Laboratory produced pulps tend to have less damages and superior strength properties compared to those produced in pulp mills. Generally fiber damages pose a problem in the production of reinforcement pulp because they tend to decrease the ability of fibers to transmit load. Previous studies on fiber damage have shown that most of the fiber damages occur during brown stock processing starting from cooking and discharging. This literature review gives an overall picture on fiber damages occurring during softwood kraft pulp production with an emphasis on the oxygen delignification stage. In addition the oxygen delignification stage itself is described in more detailed extent in order to understand the mechanisms behind the delignification and fiber damaging effect. The literature available on this subject is unfortunately quite contradictory and implicates a lotof different terms. Only a few studies have been published which help to understand the nature of fiber damages. For that reason the knowledge presented in this work is not only based on previous studies but also on research scientist and mill staff interviews.

The Strengths and Difficulties Questionnaire (SDQ-Fin) among Finnish children and adolescents

Objective: The psychometric properties of The Strengths and Difficulties Questionnaire (SDQ-Fin), a Finnish version of a brief screening instrument were studied. Emotional and behavioural problems of 7- to 15-year-olds measured by the SDQ were reported, as well as the occurrence of self-reported eating disturbance symptoms and alcohol use among adolescents. Methods and samples: The cross-sectional school survey included 25 items of the SDQ-Fin, items about eating disturbance, alchol use and child psychiatric help-seeking. The study consists of three community samples: 1. The SDQ-Fin parent (n = 703) and teacher (n = 376) versions of 7 – 12 –year-olds, and self-report versions (n = 528) of 11 – 16 years-olds were obtained, and 2. the parent (n = 81) and self-report versions of 15-16 –year olds (n = 129) were obtained in Laitila and Pyhäranta. 3. The self-report versions of 13 – 16 – year-olds (n = 1458) in Salo and Rovaniemi were obtained. Results: The psychometric properties of the SDQ-Fin were for the most part comparable with the other European SDQ research results. The internal consistency (Cronbach’s alpha = 0.71 in all informants’ reports) and inter-rater reliability (between the pairs of reports r = 0.38 - 0.44) were adequate. The concurrent validity (r = 0.75 between the SDQ and the CBCL total scores; r = 0.71 between the SDQ and the YSR total scores) was sufficient. Factor analysis of the SDQ self-report generally confirmed the postulated structure for girls and boys, except for the conduct problems scale of boys, which was fused with emotional symptoms and with hyperactivity. The response rates, means and cut-off points of the SDQ self-report scores were similar to those found, e.g. in Norway and in Britain. A high level of psychological problems, especially emotional and conduct problems and hyperactivity-inattention, were associated with high level of eating disturbance symptoms and alcohol use. Conclusion: The results showed that the psychometric properties of the SDQ-Fin are adequate and provide additional confirmation of the usefulness of the SDQ-Fin for, e.g. screening, epidemiological research and clinical purposes.

Childhood community-acquired pneumonia

Background: Community-acquired pneumonia is a leading cause of morbidity and mortality in children worldwide. New, rapid methods are needed to improve the microbiologic diagnosis of pneumonia in clinical practice. The increasing incidence of parapneumonic empyema in children accentuates the importance of the identification of the causative agent and clinical predictors of empyema. Aims and methods: Two prospective studies were conducted to find feasible diagnostic methods for the detection of causative agents of pneumonia. The usefulness of pneumolysin-targeted real-time PCR in the diagnosis of pneumococcal disease was studied in children with pneumonia and empyema, and the clinical utility of induced sputum analysis in the microbiologic diagnosis of pneumonia was investigated in children with pneumonia. In addition, two retrospective clinical studies were performed to describe the frequency and clinical profile of influenza pneumonia in children and the frequency, clinical profile and clinical predictors of empyema in children. Results: Pneumolysin-PCR in pleural fluid significantly improved the microbiologic diagnosis of empyema by increasing the detection rate of pneumococcus almost tenfold to that of pleural fluid culture (75 % vs. 8 %). In whole blood samples, PCR detected pneumococcus in only one child with pneumonia and one child with pneumococcal empyema. Sputum induction provided good-quality sputum specimens with high microbiologic yield. Streptococcus pneumoniae (46 %) and rhinovirus (29 %) were the most common microbes detected. The quantification results of the paired sputum and nasopharyngeal aspirate specimens provided support that the majority of the bacteria (79 %) and viruses (55 %) found in sputum originated from the lower airways. Pneumonia was detected in 14 % of children with influenza infection. A history of prolonged duration of fever, tachypnea, and pain on abdominal palpation were found to be independently significant predictors of empyema. Conclusions: Pneumolysin-targeted real-time PCR is a useful and rapid method for the diagnosis of pneumococcal empyema in children. Induced sputum analysis with paired nasopharyngeal aspirate analysis can be of clinical value in the microbiologic diagnosis of pneumonia. Influenza pneumonia is an infrequent and generally benign disease in children with rare fatalities. Repeat chest radiograph and ultrasound imaging are recommended in children with pneumonia presenting with clinical predictors of empyema and in children with persistent fever and high CRP levels during hospitalization.

Market of biomass fuels in Finland : IEA Bioenergy Task 40 and EUBIONET III - Country report of Finland 2009

This study considered the current situation of solid and liquid biomass fuels in Finland. The fact that industry consumes more than half of the total primary energy, widely applied combined heat and power production and a high share of solid biomass fuels in the total energy consumption are specific to the Finnish energy system. Wood is the most important source of bioenergy in Finland, representing 20% of the total energy consumption in 2007. Almost 80% of the woodbased energy is recovered from industrial by-products and residues. As a member of the European Union, Finland has committed itself to the Union’s climate and energy targets, such as reducing its overall emissions of green house gases to at least 20% below 1990 levels by 2020, and increasing the share of renewable energy in the gross final consumption. The renewable energy target approved for Finland is 38%. The present National Climate and Energy Strategy was introduced in November 2008. The strategy covers climate and energy policy measures up to 2020, and in brief thereafter, up to 2050. In recent years, the actual emissions have exceeded the Kyoto commitment and the trend of emissions is on the increase. In 2007, the share of renewable energy in the gross final energy consumption was approximately 25% (360 PJ). Without new energy policy measures, the final consumption of renewable energy would increase to 380 PJ, which would be approximately only 31% of the final energy consumption. In addition, green house gas emissions would exceed the 1990 levels by 20%. Meeting the targets will need the adoption of more active energy policy measures in coming years. The international trade of biomass fuels has a substantial importance for the utilisation of bioenergy in Finland. In 2007, the total international trading of solid and liquid biomass fuels was approximately 77 PJ, of which import was 62 PJ. Most of the import is indirect and takes place within the forest industry’s raw wood imports. In 2007, as much as 21% of wood energy was based on foreign-origin wood. Wood pellets and tall oil form the majority of export streams of biomass fuels. The indirect import of wood fuels peaked in 2006 to 61 PJ. The foreseeable decline in raw wood import to Finland will decrease the indirect import of wood fuels. In 2004– 2007, the direct trade of solid and liquid biomass fuels has been on a moderate growth path. In 2007, the import of palm oil and export of bio-diesel emerged, as a large, 170 000 t/yr biodiesel plant came into operation in Porvoo.

Advanced chemometric methods: Applicability on industrial data

Recent years have produced great advances in the instrumentation technology. The amount of available data has been increasing due to the simplicity, speed and accuracy of current spectroscopic instruments. Most of these data are, however, meaningless without a proper analysis. This has been one of the reasons for the overgrowing success of multivariate handling of such data. Industrial data is commonly not designed data; in other words, there is no exact experimental design, but rather the data have been collected as a routine procedure during an industrial process. This makes certain demands on the multivariate modeling, as the selection of samples and variables can have an enormous effect. Common approaches in the modeling of industrial data are PCA (principal component analysis) and PLS (projection to latent structures or partial least squares) but there are also other methods that should be considered. The more advanced methods include multi block modeling and nonlinear modeling. In this thesis it is shown that the results of data analysis vary according to the modeling approach used, thus making the selection of the modeling approach dependent on the purpose of the model. If the model is intended to provide accurate predictions, the approach should be different than in the case where the purpose of modeling is mostly to obtain information about the variables and the process. For industrial applicability it is essential that the methods are robust and sufficiently simple to apply. In this way the methods and the results can be compared and an approach selected that is suitable for the intended purpose. Differences in data analysis methods are compared with data from different fields of industry in this thesis. In the first two papers, the multi block method is considered for data originating from the oil and fertilizer industries. The results are compared to those from PLS and priority PLS. The third paper considers applicability of multivariate models to process control for a reactive crystallization process. In the fourth paper, nonlinear modeling is examined with a data set from the oil industry. The response has a nonlinear relation to the descriptor matrix, and the results are compared between linear modeling, polynomial PLS and nonlinear modeling using nonlinear score vectors.

De orthoëpia & orthographia linguae fennicae

Dedicatio: Jac. Tengström.

De nomine sefer

Arkit: 1 arkintunnukseton lehti, A4 B2.

Threni Jeremiae latine versi notisque explicati

Dedicatio: Fabièn de Steinheil [ransk. pr.].

Animadversiones in fennicam Bibliorum Sacrorum versionem

Arkit: 1 arkintunnukseton lehti, I4 K2.

De [hepreaa] Prov: 26: 8. sive acervo Salomonis

Invocatio: [hepreaa].

De cantico Israëlitarum ad Beerah, numer. XXI. 17. 18

Arkit: 1 arkintunnukseton lehti, A4 B1.

De parallelismo membrorum Hebraeis usitato

Arkit: 1 arkintunnukseton lehti, A-D4 E2.